多分散性对两亲性两嵌段共聚物在选择性溶剂中自组装行为影响的Monte Carlo模拟

采用Monte Carlo模拟方法研究了多分散性AB两亲性两嵌段共聚物在选择性溶剂中的自组装行为.模拟结果表明,嵌段共聚物的多分散性对体系在选择性溶剂中自组装所形成的胶束形貌结构有很大影响.当AB两嵌段共聚物的多分散系数由1.0增加至1.4时,体系中自组装所形成的胶束将会发生由囊泡到片层直至球状的一系列形态转变.通过统...     

溶剂尺寸对ABA两亲性三嵌段共聚物在选择性溶剂中自组装行为影响的Monte Carlo模拟

采用Monte Carlo模拟方法研究了溶剂尺寸对ABA两亲性三嵌段共聚物在选择性溶剂中自组装行为的影响。模拟结果表明,溶剂尺寸是决定共聚物聚集形态的重要因素之一。随着溶剂尺寸的增大,嵌段共聚物自组装所形成的胶束可以发生从球状到棒状再到囊泡状的转变。通过对各组分的相互作用对数随溶剂尺寸变化曲线的分析发现,增大溶剂尺寸会使溶剂的溶解性变差,由此引发体系中的一系列形态转变。此外,通过对体系自组装形貌结构相图的分析发现,增大溶剂尺寸或增加疏水作用同减小亲水作用对于自组装形态的改变具有同等效果。     

苯乙烯-p-乙烯基苯甲酸两亲性嵌段共聚物在乙醇中自组装行为的电镜观察

两亲性嵌段共聚物在只对其中一链段为良溶剂的选择性溶剂中 ,能够自组装形成胶束 .胶束的形态和尺寸大小依赖于两链段的性质 ,共聚物的组成、浓度、溶剂的性质等[1] .这一性质使得嵌段共聚物在分子识别、药物和其他物质的输送、基因疗法、水系涂料、污染物的除去、纳米复合材料的制备、催化剂以及传感器等方面展示着潜在的应用前景 .因此 ,两亲性嵌段共聚物的合成及其在选择性溶剂中的自组装行为的研究近年来颇受关注[2 ] .依据两链段的比例不同 ,嵌段共聚物可形成星状胶束和“板寸头”(Ｃｒｅｗ ｃｕｔ)型胶束[3 ] .当可溶段远比不溶段长时…     

嵌段共聚物在选择性溶剂中自组装过程的计算机模拟

嵌段共聚物由于各嵌段性质不同,在选择性溶剂中能够自发地组装形成众多形态结构各异的纳米结构,如纳米级的球状、棒状、环状、片层状、囊泡及复合胶束等。这些胶束结构在药物传输、催化、电子信息等众多领域都有潜在的应用价值。通过计算机模拟可以在线监控嵌段共聚物的组装过程、揭示其组装机理,明确各种因素对组装结构的影响规律,为实验研究提供思路和理论支持,因此越来越受到人们的广泛关注。本文主要综述了通过计算机模拟对嵌段共聚物在选择性溶剂中自组装研究的一些最新进展,详细讨论了影响嵌段共聚物自组装过程和胶束形貌的各种因素,并对这个领域未来的发展进行了展望。     

由可控聚合反应直接制备不同形貌的聚集体

由可控聚合,包括活性阴离子和自由基聚合直接制备不同形貌纳米材料,是近几年来合成化学领域的一个重要研究成果.与两亲性嵌段共聚物在选择性溶剂中自组装方法不同,在选择性溶剂中进行的分散聚合,首先生成两亲性嵌段共聚物,并逐渐增加第二段聚合物的链长,以实现相分离,形成球形胶束;聚合物链继续增长,实现形貌转变,从而制备预期的聚合物形貌,包括球形胶束、纳米棒、纳米线、囊泡和复合囊泡等.本文综述了乳液聚合法制备球形胶束等形貌;描述了不同聚合体系形成的形貌以及它们的性质和应用,讨论了形貌的形成机理和控制方法,同时指出了存在的问题.     

两亲性/双疏性嵌段共聚物共混体系的自组装行为研究

采用耗散粒子动力学方法,研究了两亲性嵌段共聚物和双疏性嵌段共聚物共混体系的自组装行为,探讨了双疏性嵌段共聚物的浓度以及双疏性嵌段共聚物的嵌段体积分数对聚集体结构的影响.结果表明,随着双疏性嵌段共聚物浓度的增加,聚集体发生自囊泡到棒状胶束再到同心圆多舱胶束的转变,且当浓度较高时,同心圆多舱胶束的同心圆层数量与浓度密切相关.当双疏性嵌段共聚物中的嵌段体积分数降低时,球形胶束由同心圆结构转变为非同心圆结构.此外,利用Minkowski泛函方法表征了多舱胶束的形成过程,发现这是一个先形成大尺度球形结构、再形成小尺度内核结构的分级组装过程.     

嵌段共聚物结晶性胶束

近年来嵌段共聚物在选择性溶剂中由结晶驱动形成胶束的自组装过程因其较好的可控性逐渐受到人们的关注.本文首先综述了嵌段共聚物结晶性胶束形貌和尺寸的影响因素,包括溶剂环境、共聚物结构、结晶温度等.然后介绍了结晶性胶束的活性生长以及"嵌段共胶束";最后提出了该研究领域目前存在的问题和今后可能的发展方向.     

两亲性嵌段共聚物的合成及其在离子液体中的自组装行为

采用阴离子开环聚合法合成了两亲性嵌段共聚物PLA-PEG-PLA.用FT-IR,1H NMR和GPC等手段对嵌段共聚物的结构组成进行了表征.两亲性嵌段共聚物在离子液体1-丁基-3-甲基咪唑六氟磷酸盐中能自组装成胶束,用透射电子显微镜观察了聚合物在离子液体中形成胶束的纳米结构.当疏水链长固定时,胶束的自组装形状主要依赖于亲水链的长度.两亲性共聚物在离子液体中可自组装成可控制结构的纳米胶束,这种纳米结构胶束在很多领域具有广泛的应用前景.     

用SAXS/WAXS研究聚氧乙烯/聚氧丁烯嵌段共聚物在n-己烷中的结晶性球形胶束结构

嵌段共聚物在选择性溶剂中能够自组装形成胶束,胶束的不同形状与嵌段共聚物的结构、溶剂和浓度有关．无定形嵌段共聚物通常形成球形胶束,在某些情况下也可以形成其它形状的胶束,关于结晶性嵌段共聚物在无定形链段选择性溶剂中的胶束结构和形状的报道非常少．由于结晶和相似相溶两种作用力的竞争,使得这类胶束的形状丰富多变．通常结晶作用较强时,结晶性嵌段共聚物形成片状的胶束,当结晶组分比较少时,可形成棒状胶束,尽管理论上已经指出存在球形胶束,但尚无关于这方面的报道。     

无规共聚物自组装球形胶束表面亲水性的耗散粒子动力学模拟

建立了含不同亲疏水粒子比的双亲性无规共聚物粗粒化模型. 采用耗散粒子动力学方法模拟了两亲性无规共聚物选择性溶剂自组装球形胶束表面的亲水性能. 模拟结果表明, 无规共聚物在选择性溶剂中自组装得到实心球形胶束, 球形胶束表面的亲水性与聚合物链亲水粒子含量、溶剂的选择性有关. 随着聚合物链所含亲水粒子增加, 球形胶束表面的亲水性增强. 球形胶束表面的亲水性随着疏水粒子与溶剂粒子间的排斥参数增大而增强, 模拟结果与实验结论一致. 该模拟方法给出的胶束微结构信息可以为双亲无规共聚物分子设计及自组装双亲胶束制备提供一定的理论指导.     

嵌段序列对聚合物囊泡形成过程影响的Monte Carlo模拟

采用Monte Carlo模拟方法研究了具有相同链长和组分比的不同嵌段序列的AB两嵌段共聚物与ABA三嵌段共聚物在选择性溶剂中形成囊泡的动力学过程. 模拟结果表明, AB两嵌段共聚物囊泡的形成与ABA三嵌段共聚物囊泡的形成的动力学过程不同. 在慢速退火条件下, ABA三嵌段共聚物囊泡是通过亲水链段向胶束的表面和中心扩散而形成的, 而AB两嵌段共聚物囊泡则由片层弯曲闭合而形成. 相对而言, 退火速度对AB两嵌段共聚物囊泡形成的动力学过程没有显著影响, 其改变仅影响亲水链段与疏水链段发生相分离的难易程度. 当退火速度较快时, 亲水链段和疏水链段发生相分离的速度较快且相分离发生在囊泡形成之前; 而当退火速度较慢时亲水链段和疏水链段之间的相分离在囊泡形成之后仍在进行.     

含偶氮苯两亲性ABA三嵌段共聚物合成与自组装研究

利用原子转移自由基聚合(ATRP)制备了中间链段含对氰基偶氮苯尾挂液晶基元的PMAA-b-PMAZOCN-b-PMAA两亲性三嵌段共聚物.首先合成了含有偶氮苯液晶基元的甲基丙烯酸酯单体;再使用小分子双端引发剂,以对壬基联二吡啶、溴化亚铜为催化剂,通过ATRP反应制备了含偶氮苯液晶侧基的双端大分子引发剂.进一步以氯化亚铜为催化剂,用该大分子引发剂引发甲基丙烯酸叔丁酯聚合,制备了结构规则的PtBMA-b-PMAZOCN-PtBMA三嵌段共聚物.通过在三氟乙酸作用下的选择性水解,将PtBMA段中的甲基丙烯酸叔丁酯单体单元转化为甲基丙烯酸,得到了两端亲水,中间疏水的两亲性ABA三嵌段共聚物.用1H-NMR、GPC、PLM、DSC等对产物进行了表征.并利用溶剂诱导微相分离的方法,研究了该共聚物在THF/水混合溶剂中的自组装行为.TEM结果显示,在采用的亲疏水链段比例的条件下,得到了囊泡结构.囊泡结构的平均直径在300~500 nm.在固态下经过紫外光照射,囊泡结构转变为实心胶体球.     

Amphiphilic Triblock Copolymers Based on Acrylic Acid and Alkyl Acrylates Synthesized via RAFT Polymerization-Induced Self-Assembly and RAFT Miniemulsion Polymerization

The aim of this research is to reveal the advantages and limitations of different heterophase polymerization methods, such as dispersion, emulsifier-free emulsion and miniemulsion polymerization, for the obtaining of in situ self-assembled amphiphilic triblock copolymer core-shell particles. In the present research, we addressed the problems of the controlled synthesis of two- and three-component amphiphilic ABA triblock copolymers based on acrylic acid, fluoroalkyl acrylates and butyl acrylate via polymerizationinduced self-assembly and reversible addition fragmentation chain transfer polymerization (RAFT) miniemulsion polymerization using symmetrical trithiocarbonates.     

Effect of binary block‐selective solvents on self‐assembly of ABA triblock copolymer in dilute solution

We have studied the self‐assembly of the ABA triblock copolymer (P4VP‐b‐PS‐b‐P4VP) in dilute solution by using binary block‐selective solvents, that is, water and methanol. The triblock copolymer was first dissolved in dioxane to form a homogeneous solution. Subsequently, a given volume of selective solvent was added slowly to the solution to induce self‐assembly of the copolymer. It was found that the copolymer (P4VP₄₃‐b‐PS₃₆₆‐b‐P4VP₄₃) tended to form spherical aggregate or bilayer structure when we used methanol or water as the single selective solvent, respectively. However, the aggregates with various nanostructures were obtained by using mixtures of water and methanol as the block‐selective solvents. The aggregate structure changed from sphere to rod, vesicle, and then to bilayer by changing water content in the block‐selective solvent from 0 to 100%. Moreover, it was found that the vesicle size could be well controlled by changing the copolymer content in the solution. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1536–1545, 2008     

Study of controllable aggregation morphology of ABA amphiphilic triblock copolymer in dilute solution by changing the solvent property

We have studied, both experimentally and theoretically, the aggregation morphology of the ABA amphiphilic triblock copolymer in dilute solution by changing the solvent property. Experimental results showed that the micellar morphology changed from spheres to rods and then to vesicles by changing the common solvent from N-N-dimethylformamide (DMF) to dioxane and then to tetrahydrofuran (THF). These controllable aggregates were also obtained by Monte Carlo simulation. The simulative results showed that the solvent property is a key factor that determines the copolymer aggregation morphology. The morphology changed from spheres to rods and then to vesicles by increasing the solvent solubility, corresponding to the change of stretched of the copolymer chains in the micellar cores. This result is in good agreement with the experimental one. Moreover, the simulative results revealed that the end-to-end distant of the ABA triblock copolymer in the vesicle was larger than that in the spheres and rods, indicating that the copolymer chains were more stretched in vesicles than in the spheres and rods. Furthermore, we gave the distribution of the fraction of the chain number with the end-to-end distance. The results indicated that the amount of folded chains is almost the same as that of stretched chains in the vesicle. Although most chains were folded, stretched chains could be found in the rod and sphere micelles.     

Self-assembly of ABA amphiphilic triblock copolymers into vesicles in dilute solution

Self-assembly of an ABA amphiphilic triblock copolymer into vesicles in dilute solution was studied by successfully combining experimental methods and a real-space self-consistent field theory in three-dimensional space. It was found experimentally that vesicle size was sensitive to the initial copolymer concentration in the organic solvent. Also, the aggregate morphologies and vesicles sizes were found to be dependent on the annealing time. A number of complex vesicles, such as global, long-style, trigonal, and necklacelike vesicles, were obtained in our experiments. Moreover, the corresponding microstructures were produced in our simulations. The results show that various vesicles in dilute solution are formed solely on account of the inhomogeneous density distribution in the local region in nature. Our simulations confirm that the structural complexity coexisting behavior in the single-amphiphile systems is largely attributed to the metastability rather than the polydispersity of the triblock copolymer. These metastable states should strongly depend on the pathway of the system on the free energy landscapes, which is governed by the initial condition.     

A TEMPO-mediated “living” free-radical approach to ABA triblock dendritic linear hybrid copolymers

Dumbbell-shaped ABA triblock copolymers composed of benzyl ether dendrons and polystyrene as the A and B blocks, respectively, were prepared using 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) -mediated “living” free-radical polymerization. A new bis-dendritic unimolecular initiator, compound 3, was employed to study the efficiency of ABA triblock formation under standard TEMPO-mediated polymerization conditions. By this design, the central B block of the ABA triblock copolymer was grown into the bis-dendritic unimolecular initiator. The ABA triblock copolymer products were separated from their by-products, AB diblock copolymers, by column chromatography on silica gel. The isolated copolymers were characterized using gel permeation chromatography and proton nuclear magnetic resonance spectroscopy as complimentary techniques. That the dendritic-linear AB diblock copolymer was obtained in a mixture with ABA triblock material indicates that TEMPO-terminated dendron counter-radical 5 is an imperfect mediator of this free-radical polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3748–3755, 1999     

基于非共价键作用的二嵌段共聚物/均聚物超分子体系的自组装行为

采用实空间求解的自洽场理论,研究了两亲性二嵌段共聚物(AB)/均聚物(C)超分子体系在溶液中的自组装行为,其中B疏水嵌段的自由末端与C均聚物的一个末端形成可逆的非共价键.在稀溶液中,AB/C超分子聚合物体系通过自组装形成了一系列不同形貌的胶束,如核-壳-冠的三层胶束和蠕虫状胶束等.研究发现,胶束形貌受到非共价键强度和初...     

Asymmetric ABC-triblock copolymer membranes induce a directed insertion of membrane proteins

Asymmetric molecules and materials provide an important basis for the organization and function of biological systems. It is well known that, for example, the inner and outer leaflets of biological membranes are strictly asymmetric with respect to lipid composition and distribution. This plays a crucial role for many membrane-related processes like carrier-mediated transport or insertion and orientation of integral membrane proteins. Most artificial membrane systems are, however, symmetric with respect to their midplane and membrane proteins are incorporated with random orientation. Here we describe a new approach to induce a directed insertion of membrane proteins into asymmetric membranes formed by amphiphilic ABC triblock copolymers with two chemically different water-soluble blocks A and C. In a comparative study we have reconstituted His-tag labeled Aquaporin 0 in lipid, ABA block copolymer, and ABC block copolymer vesicles. Immunolabeling, colorimetric, and fluorescence studies clearly show that a preferential orientation of the protein is only observed in the asymmetric ABC triblock copolymer membranes.