Determination of heavy metal pollution with environmental physicochemical parameters in waste water of Kocabas Stream (Biga, Canakkale, Turkey) by ICP-AES

Waste water pollution of industrial areas can answer for the serious consequences of one of the most important environmental threats to the future. In this study, inductively coupled plasma-atomic emission spectrometry method (ICP-AES) is proposed to determine heavy metals (Pb, Cu, Cd, Cr, Zn, Al, Fe, Ni, Co, Mn) and major elements (Ca, Mg) in waste water of Kocabas Stream. The concentration of metals in the waste water samples taken from 9 different stations (St.) in Biga-Kocabas Stream in November 2004 (autumn period) were determined after simple pretreatment of samples by the proposed ICP-AES method. An analysis of a given sample is completed in about 15 min for ICP-AES the method. The results of heavy metals concentrations in waste water were found between 0.00001–77.69610 mg l⁻¹ by the ICP-AES technique. The concentrations of Pb, Cd, Cu, Zn, Cr, Al, Fe, Mn, Ni, Co, Mg and Ca 0.00001 (St.3,6,7) – 0.0087 mg l⁻¹ (St.9), 0.00001 (St.4-7) – 0.0020 mg l⁻¹ (St.8), 0.00001 (St.1,3-7,9) – 0.0041 mg l⁻¹ (St.2), 0.0620 (St.2) – 0.2080 mg l⁻¹ (St.3), 0.0082 (St.6) – 0.2290 mg l⁻¹ (St.8), 0.3580 (St.2) – 1.7400 mg l⁻¹ (St.3), 0.2240 (St.1) – 0.6790 mg l⁻¹ (St.3), 0.0080 (St.1) – 1.5840 mg l⁻¹ (St.3), 0.0170 (St.3) – 0.0640 mg l⁻¹ (St.2), 0.0010 (St.1,4,5,8) – 0.0080 mg l⁻¹ (St.3), 5.0640 (St.9) – 5.2140 mg l⁻¹ (St.1) and 43.3600 (St.2) – 77.6961 mg l⁻¹ (St.9), respectively. Also we measured environmental physicochemical parameters such as temperature, salinity, specific conductivity, total dissolved solid (TDS), pH, oxidation and reduction potential (ORP), and dissolved oxygen (DO) in the waste water at sampling stations.     

Distribution of heavy metals in surface water of Ranipet industrial area in Tamil Nadu, India

Ranipet industrial area is about 120 km from Chennai on Chennai-Bangalore highway and is a chronic polluted area identified by Central Pollution Control Board of India. It is one of the biggest exporting centers of tanned leather in India. The total number of industries located in and around Ranipet town are 240 tanneries along with ceramic, refractory, boiler auxiliaries plant, and chromium chemicals. Studies were carried out to find out the contamination of surface water bodies due to industrial effluents. The results reveal that the surface water in the area is highly contaminated showing very high concentrations of some of the heavy/toxic metals like Cadmium ranging from 0.2 to 401.4 μg/l (average of 51.1 μg/l), Chromium 2.4–1,308.6 (average of 247.2 μg/l), Copper 2.1–535.5 μg/l (average of 95.5 μg/l), Nickel 1.6–147.0 μg/l (average of 36.7 μg/l), Lead 6.4–2,034.4 μg/l (average of 467.8 μg/l) and Zinc 20.8–12,718.0 μg/l (average of 3,760.4 μg/l). The concentration levels of these metals are much above the permissible limits in surface water and are health hazards especially for the people working in the tannery industries. It was observed that the people in the area are seriously affected and suffering from occupational diseases such as asthma, chromium ulcers and skin diseases. Distribution of metals, their contents at different locations, and their effects on human health are discussed in this paper.     

微波消解ICP-AES法测定废气中铅镉砷

采用微波消解电感耦合等离子体发射光谱法同时测定废气中的铅、镉、砷,在优化的试验条件下,方法在0 mg/L～5.00 mg/L范围内线性良好,铅、镉、砷的检出限分别为0.250 μg/m3、0.125 μg/m3、0.375 μg/m3(按采样体积400 L、定容体积50 mL计),空白滤筒平行测定6次的RSD为2.3％～10.5％,加标回收率为83％ ～ 112％,与标准方法的测定结果无显著差异.     

电感耦合等离子体原子发射光谱法测定废水中的铊

采用电感耦合等离子体原子发射光谱仪(ICP-AES)测定废水中铊,并对测定波长、介质及其酸度、共存元素干扰等因素进行分析和条件优化,使该方法在0 mg/L~5.00 mg/L范围内线性良好,相关系数为0.999 9。方法检出限为22μg/L,该方法对铊标准样品测定的结果在保证值范围内,4份废水样7次测定结果的RSD为0.2%~0.8%,实际废水样品的加标回收率为98.0%~100%。     

Magnetic mapping of fly-ash pollution and heavy metals from soil samples around a point source in a dry tropical environment

The Singrauli region in the southeastern part of Uttar Pradesh, India is one of the most polluted industrial sites of Asia. It encompasses 11 open cast coalmines and six thermal power stations that generate about 7,500 MW (about 10% of India’s installed generation capacity) electricity. Thermal power plants represent the main source of pollution in this region, emitting six million tonnes of fly-ash per annum. Fly-ash is deposited on soils over a large area surrounding thermal power plants. Fly-ashes have high surface concentrations of several toxic elements (heavy metals) and high atmospheric mobility. Fly ash is produced through high-temperature combustion of fossil fuel rich in ferromagnetic minerals. These contaminants can be identified using rock-magnetic methods. Magnetic susceptibility is directly linked to the concentration of ferromagnetic minerals, primarily high values of magnetite. In this study, magnetic susceptibility of top soil samples collected from surrounding areas of a bituminous-coal-fired power plant were measured to identify areas of high emission levels and to chart the spatial distribution of airborne solid particles. Sites close to the power plant have shown higher values of susceptibility that decreases with increasing distance from the source. A significant correlation between magnetic susceptibility and heavy metal content in soils is found. A comparison of the spatial distribution of magnetic susceptibility with heavy-metal concentrations in soil samples suggests that magnetic measurements can be used as a rapid and inexpensive method for proxy mapping of air borne pollution due to industrial activity.     

Estimation of Polish cigarettes contamination with cadmium and lead, and exposure to these metals via smoking

To estimate exposure to cadmium (Cd) and lead (Pb) through cigarette smoking, the concentrations of both metals in the blood or/and urine of smokers (20 cigarettes or more per day for 10 years or longer) and their non-smoking counterparts inhabiting an environmentally unpolluted area (Bialystok, Poland) were evaluated, as well as Cd and Pb contents in the cigarette brands (produced in Poland) smoked by the participants, including intact cigarettes, pre-smoking (tobacco, paper and filter) and post-smoking (butt, ash and smoke) cigarette components. Blood and urinary Cd concentrations in the smokers have been already reported by us to be 2–4 times higher than in the non-smokers (Galażyn-Sidorczuk et al. Polish Journal of Environmental Studies, 13 (Suppl.1):91–95, 2004). All the other measurements are the subject of the present paper. Pb concentration in the blood of the cigarette smokers (52.12 ± 15.51 μg l⁻¹) was higher by 29% than in the non-smokers (40.42 ± 11.19 μg l⁻¹). The mean Cd and Pb contents in the cigarettes were 0.6801 ± 0.1765 and 0.6853 ± 0.0746 μg per cigarette, respectively. Under cigarette burning, performed using a machine for self-acting burning, on average 33% of Cd and 11% of Pb present in the whole cigarette was released into the smoke. For Cd, unlike Pb, there was a high positive correlation between the metal content in cigarettes and tobacco and its release into the smoke. Moreover, the subjects smoking cigarettes containing the highest Cd amount had higher blood Cd concentration than smokers of other cigarette brands. The results give clear evidence that in the case of inhabitants of areas unpolluted with Cd and Pb habitual cigarette smoking, due to tobacco contamination, creates a serious source of chronic exposure to these metals, especially to Cd.     

Concentrations of heavy metals in urban soils of Talcahuano (Chile): a preliminary study

Concentrations of Cd, Cr, Ni, Pb, and Zn in the top-(0–10 cm) and sub-surface (10–20 cm) soils of the Talcahuano urban area were measured. The main soil properties (organic matter, CaCO₃, pH, particle sizes) were determined for a network of representative sampling sites. The mean Cr, Ni, Pb, and Zn contents in the urban topsoil samples from Talcahuano (37.8, 22.6, 35.2, 333 mg kg⁻¹, respectively) were compared with mean concentrations for other cities around the world. The results revealed higher concentrations of heavy metals in topsoil samples than in sub-surface samples. The samples from IS1, IS2, and IS3, located in the Talcahuano industrial park, had higher Cr, Ni, Pb, and Zn contents than did samples from the other sites. This was probably due to local pollution by industrial (metallurgical) dust, although other diffuse pollution throughout the entire port region (shipyards, metallurgy, the dismantling of old ships), and contributions from the wind from adjacent industrial, storage, and vessel areas clearly played a role. Heavy metals were lowest in the sample taken on school grounds (SG).     

Concentration of heavy metals in Karanja reservoir, Bidar district, Karnataka, India

In this study, some heavy metals concentrations (Zn, Pb, Fe, Mn, Cu, Ni) and other physico-chemical parameters were studied during October 2001 to September 2003 in Karanja reservoir, Bidar district. Water quality parameters were collected monthly basis whereas heavy metals were analyzed by Atomic Adsorption Spectrometer (AAS). Heavy metals have shown within the permissible limits, except Fe and Ni were recorded higher values in southwest monsoon, where as Mn has showed higher concentration in northeast monsoon in and summer. All other physico-chemical parameters are with in the permissible limit. Water is moderately hard and reservoir is productive.     

Concentrations of heavy metals and aquatic macrophytes of Govind Ballabh Pant Sagar an anthropogenic lake affected by coal mining effluent

Five heavy metals Cu, Cd, Mn, Pb and Hg were found in high concentration from three sampling sites located in Asia’s largest anthropogenic lake Govind Ballabh Pant GBP Sagar. Concentrations of these heavy metals were measured in Water, bottom sediment and in different parts of the aquatic macrophytes collected from the reservoir. Plants collected from the lake were Eichhornia crassipes, Azolla pinnata, Lemna minor, Spirodela polyrrhiza, Potamogeton pectinatus, Marsilea quadrifolia, Pistia stratiotes, Ipomea aquqtica, Potamogeton crispus, Hydrilla verticillata and Aponogeton natans. These plants have shown the high concentrations of Cu, Cd, Mn, Pb and Hg in their different parts due to bioaccumulation. In general plant roots exhibited higher concentrations of heavy metals than corresponding sediments. A comparison between different morphological tissues of the sampled plants reveled the metal concentration in following order roots > leaves. Analyses of bottom sediment indicated the higher concentrations of Cd, Mn, Cu and Pb. Strong positive correlations were obtained between the metals in water and in plants as well as between metal in sediment and in plants. Indicating the potential of these plants for pollution monitoring of these metals.     

Distribution of heavy metals in water, particulate matter and sediments of Gediz River (Eastern Aegean)

The present paper is the first document of heavy metal levels in surficial sediment, water and particulate matter of the Gediz River collected from five different sites in August, October 1998, February, June 1999. The present work attempts to establish the status of distribution and environmental implications of metals in the sediment, water and particulate matter and their possible sources of derivation. The concentrations of mercury ranged 0.037–0.81, 120–430; lead 0.59–1.5, 190–8,100; copper 0.24–1.6, 30–180; zinc 0.19–2.9, 10–80; manganese 30–170, 20–490; nickel 0.39–9.0, 100–510; iron 1.3–687, 100–6,200 μg/l in water and particulate matter, respectively. The maximum values in water were generally obtained in summer periods due to industrial and agricultural activities at Muradiye. The particulate metal concentrations also generally showed increased levels from the upper Gediz to the mouth of the river. Calculation of metal partition coefficients shows that the relative importance of the particulate and the water phases varies in response to water hydrochemistry and suspended solid content, but that most elements achieve a conditional equilibrium in the Gediz River. The metals ranged between Hg: 0.25–0.49, Cr: 59–814, Pb: 38–198, Cu: 15–148, Zn: 34–196, Mn: 235–1,371, Ni: 35–175, and Fe: 10,629–72,387 mg/kg in sediment. The significant increase of metals found in Muradiye suggested a pollution effect, related to anthropogenic wastes. Also, relatively high concentrations of Ni and Mn occurred in sampling site upstream, due to geochemical composition of the sediments. Maximum values of contamination factor for metals were noticed for sediment of Muradiye. The sampling stations have very high degree of contamination indicating serious anthropogenic pollution.     

A new voltammetric method for the simultaneous monitoring of heavy metals in sea water,sediments, algae and clams: application to the Goro Bay ecosystem

Arsenic(III), selenium(IV), copper(II), lead(II), cadmium(II),zinc(II) have been determined in sea water, sediments, algae andclams by differential pulse cathodic (DPCSV) and anodic (DPASV)stripping voltammetry. The voltammetric measurements are carriedout using a conventional three-electrode cell and the ammonia-ammonium chloride buffer pH 9.2 as supporting electrolyte.The analytical procedure has been verified by the analysisof the standard reference materials (Estuarine SedimentBCR-CRM 277, Ulva Lactuca BCR-CRM 279 and Mussel Tissue BCR-CRM278). The precision and the accuracy are less than 5%. Thisprocedure is utilized for the monitoring of heavy metals inthe Po river mouth area (Italy).     

Determination of lead, cadmium and copper in roadside soil and plants in Elazig, Turkey

The concentrations of lead, cadmium and copper in roadside soil and plants in Elazig, Turkey were investigated. Soil samples were collected at distances of 0, 25 and 50 m from the roadside. The concentrations of lead, cadmium and copper were measured by Flame Atomic Absorption Spectrophotometry (FAAS). A slotted tube atom trap (STAT) was used to increase the sensitivity of lead and cadmium in FAAS. Lead concentrations in soil samples varied from 1.3 to 45 mg kg⁻¹ while mean lead levels in plants ranged from120 ng g⁻¹ for grape in point-4 to 866 ng g⁻¹ for apple leaves in point-2. Lead analyses showed that there was a considerable contamination in both soil and plants affected from traffic intensity. Overall level of Cd in soil samples lies between 78 and 527 ng/g while cadmium concentration in different vegetations varied in the range of 0.8–98.0 ng g⁻¹. Concentrations of copper in soil and plant samples were found in the range of 11.1–27.9 mg kg⁻¹ for soil and 0.8–5.6 mg kg⁻¹ for plants. Standard reference material (SRM) was used to find the accuracy of the results of soil analyses.     

Behaviour and Quantification Studies of Terbacil and Lenacil in Environmental Samples Using Cyclic and Adsorptive Stripping Voltammetry at Hanging Mercury Drop Electrode

The cyclic voltammograms of terbacil and lenacil at the hanging mercury drop electrode showed a single well defined four electron irreversible peak in universal buffer of pH 4.0 for both compounds. The peak potentials were shifted to more negative values on the increase of pH of the medium, implying the involvement of protons in the electrode reaction and that the proton transfer reaction precedes the proper electrode process. The four electron single peak may be attributed to the simultaneous reduction of carbonyl groups present in 2 and 4 in pyrimidine ring of terbacil and lenacil to the corresponding hydroxy derivative. Based on the interfacial adsorptive character of the terbacil and lenacil onto the mercury electrode surface, a simple sensitive and low cost differential pulse adsorptive stripping voltammetric procedure was optimized for the analysis of terbacil and lenacil. The optimal operational conditions of the proposed procedure were accumulation potential E _acc = −0.4 V, accumulation time t _acc = 80 s, scan rate = 40 mV s⁻¹, pulse amplitude = 25 mV using a universal buffer pH 4.0 as a supporting electrolyte. The linear concentration range was found to be 1.5 × 10⁻⁵ to 1.2 × 10⁻⁹ mol/l and 1.5 × 10⁻⁵ to 2.5 × 10⁻⁸ mol/l with the lower detection limit of 1.22 × 10⁻⁹ and 2.0 × 10⁻⁸ mol/l. The correlation coefficient and relative standard deviation values are found to be 0.942, 0.996, 1.64% and 1.23%, respectively, for 10 replicants. The procedure was successfully applied for determination of terbacil and lenacil in formulations, mixed formulations, environmental samples such as fruit samples and spiked water samples.     

Monitoring of ambient particles and heavy metals in a residential area of Seoul, Korea

In this study, ambient TSP, PM10, and PM2.5 in a residential area located in the northern part of Seoul were monitored every other month for 1 year from April 2005 to February 2006. The monthly average levels of TSP, PM10, and PM2.5 had ranges of 71∼158, 40∼106, and 28∼43 μg/m³, respectively. TSP and PM10 showed highest concentration in April; this seems to be due to Asian dust from China and/or Mongolia. However, the fine particle of PM2.5 showed a relatively constant level during the monitoring period. Heavy metals in PM 10 and PM2.5, such as Cr, As, Cd, Mn, Zn and Pb, were also analysed during the same period. The monthly average concentrations of heavy metal in PM2.5 were Cr:1.9∼22.7 ng/m³; As:0.9∼2.5 ng/m³; Cd: 0.6∼7 ng/m³; Mn:6.1∼22.6 ng/m³; Zn: 38.9∼204.8 ng/m³, and Pb: 21.6∼201.1 ng/m³. For the health risk assessment of heavy metals in ambient particles, excess cancer risks were calculated using IRIS unit risk. As a result, the excess cancer risks of chromium, cadmium, and arsenic were shown to be more than one per million based on the annual concentration of heavy metals, and chromium showed the highest excess cancer risk in ambient particles in Seoul.     

线性扫描溶出伏安法同时测定水样中铅镉铜锌

通过多壁碳纳米管-Nafion复合膜修饰电极,建立水样中痕量铅、镉、铜、锌同时测定的线性扫描溶出伏安分析法,优化支持电解质及pH值、修饰剂用量、富集电位及时间等测定条件。实验结果表明,在pH 4.0的NaAc-HAc缓冲液中,-1.20V富集5min后,在电位-1.04V、-0.72V、-0.45V及-0.16V附近分别产生锌、镉、铅、铜的灵敏溶出峰,测定各元素的线性关系良好,相对标准偏差均小于5.4%。该法已成功应用于实际水样中痕量铅、镉、铜、锌的同时测定,加标回收率在93.3%~106.7%之间,结果满意。     

生活垃圾焚烧烟气中重金属排放水平及影响因素分析

通过对浙江省生活垃圾焚烧炉排放烟气中重金属的监测,分析生活垃圾焚烧烟气中重金属排放水平。结果表明,汞及其化合物的检出率最高,为95.7%,其次为铬和锰,检出率均为60%,且在不同的焚烧炉中重金属排放浓度差异较大,检出率最低的为铊和镉,且排放浓度均较低;焚烧炉排放烟气中汞及其化合物、镉+铊及其化合物、锑+砷+铅+铬+钴+铜+锰+镍及其化合物排放浓度均低于国标排放限值,最大占标率分别为76%、4%、21.9%。焚烧烟气中的重金属含量与焚烧垃圾中的重金属含量有关,烟气通过废气处理设施,可有效地减少重金属等污染物的排放。     

Distribution of heavy metals in sediment and water of river Gomti

Gomti river receives industrial as well as domestic wastes from various drains of Lucknow city. In the process the water and sediment of the river Gomti get contaminated with heavy metals and other pollutants. In the present study, impacts of domestic/industrial wastes on the water and sediment chemistry of river Gomti with special reference to heavy metals have been investigated in different seasons (summer, winter and rainy). For this, seven sampling sites: Gaughat, Mohan Meakin, Martyrs Memorial, Hanuman Setu, Nishatganj bridge, Pipraghat and Malhaur, in the river Gomti in Lucknow region were identified and samples of water and sediments were collected in all the three seasons. In the collected water and sediment samples, six metals (Cd, Cr, Cu, Ni, Pb, and Zn) were analyzed on ICP-AES (Inductively coupled plasma emission spectroscopy) Labtam Plasmalab 8440. High concentrations of all the metals were noticed in water and sediment in rainy season compared to summer and winter. Because in rainy season runoff from open contaminated sites, agricultural field and industries, directly comes into the river without any treatment. In both the cases, the concentration of zinc was maximum (0.091 g/ml in water and 182.13 g/g in sediment) and the concentration of cadmium (0.001 g/ml in water and 17.26 g/g in sediment) was minimum. Higher concentration of metal in water and sediment during rainy season could be due to the industrial/agricultural/domestic runoff coming into the river.     

Enrichment and fractionation of heavy metals in bed sediments of River Narmada, India

A metal fractionation study on bed sediments of River Narmada in Central India has been carried out to examine the enrichment and partitioning of different metal species between five geochemical phases (exchangeable fraction, carbonate fraction, Fe/Mn oxide fraction, organic fraction and residual fraction). The river receives toxic substances through a large number of tributaries and drains flowing in the catchment of the river. The toxic substances of particular interest are heavy metals derived from urban runoff as well as municipal sewage and industrial effluents. Heavy metals entering the river get adsorbed onto the suspended sediments, which in due course of time settle down in the bottom of the river. In this study fractionation of metal ions has been carried out with the objective to determine the eco-toxic potential of metal ions. Although, in most cases (except iron) the average trace/heavy metal concentrations in sediments were higher than the standard shale values, the risk assessment code as applied to the present study reveals that only about 1–3% of manganese, <1% of copper, 16–19% of nickel, 4–20% of chromium, 1–4% of lead, 8–13% of cadmium and 1–3% of zinc exist in exchangeable fraction and therefore falls under low to medium risk category. According to the Geo-accumulation Index (GAI), cadmium shows high accumulation in the river sediments, rest of other metals are under unpolluted to moderately polluted class.     

Redistribution of zinc, cadmium, and lead among soil fractions in a sandy calcareous soil due to application of poultry litter

This study was conducted to evaluate, using soil columns, the mobilization and redistribution of heavy metals (Zn, Cd, and Pb) among different soil fractions by soluble organic ligands within poultry litter. Uncontaminated soil was amended with Zn, Cd, and Pb to achieve concentration levels of 400, 8, and 200 mg kg⁻¹ soil, respectively. Columns repacked with this amended soil were leached with distilled water, 0.01 M EDTA, 0.01 M CaCl₂, or poultry litter extract (PLE) solutions. After leaching, the soil samples in the columns were sequentially extracted for exchangeable (EXC), carbonate (CARB) organic matter (OM), Mn oxide (MNO), Fe oxide (FEO), and residual (RES) fractions. Considerable mobilization of Zn, Cd, and Pb occurred in soil during EDTA leaching. Leaching with PLE and CaCl₂ solutions significantly decreased Zn and Cd concentrations in the EXC, CARB, and OM fractions. These solutions significantly decreased Pb concentration in the EXC fraction, while PLE solubilized more Pb from EXC fraction than CaCl₂. Thus, the applied poultry litter may change Zn, Cd, and Pb fractions in metal-amended soil and possibly enhance metal mobility.     

Heavy Metal Concentrations in Water, Sediments and Body Tissues of Red Worm (Tubifex spp.) Collected from Natural Habitats in Mumbai, India

Live feeds, especially Tubifex spp., which are collected from a wide variety of polluted habitats, are used by aquarium fish keepers in India. These habitats receive domestic sewage and industrial wastes from nearby residential and industrial areas. Reports of morbidity and mortality from aquarium fish culturists in and around Mumbai led to the present investigations on the ecology of these habitats with a view to assess the water quality, presence of heavy metals in the environment and their bioaccumulation in Tubifex worms, and to examine whether these habitats could be exploited to meet the demand of the industry. Six natural red worm (Tubifex spp.) collection centres in Mumbai and Thane districts of Maharashtra state in India constituting a major source of live Tubifex supply to aquarium fish industry were evaluated for pollution, heavy metal concentration in water, sediments and in the body tissues of Tubifex. Data revealed the presence of heavy metals in water and sediments at collection sites and bioaccumulation of cadmium, iron, lead, zinc and copper in body tissues of Tubifex worms. Cadmium ranged from 2.38 to 7.21 mg/kg, iron 671.9 to 5738 mg/kg, lead 14.95 to 33.49 mg/kg, zinc 60.20 to 166.60 mg/kg and copper 29.38 to 108.90 mg/kg of dry Tubifex worms. The study suggests that all the six collection sites are polluted and the red worms contaminated with heavy metals and hence, unfit for use in aquaria or feeding any variety of fish or crustaceans in the hatcheries.