Polarization‐independent liquid‐crystal‐etalon modulator

Abstract— The experimental demonstration of a polarization‐independent high‐transmission field‐sequential liquid‐crystal‐etalon modulator for portable projection‐display application is presented. Polarization independence allows for high transmission efficiency for laser illumination sources using the polarization diversity method of speckle reduction. These devices can also be considered for LED illumination sources; however, the spectral width of current LEDs does not allow for high efficiency, especially for the green channel. These devices demonstrate millisecond switching needed for field‐sequential‐color generation.     

Simple pixel circuits for high resolution and high image quality organic light emitting diode‐on‐silicon microdisplays with wide data voltage range

Two simple pixel circuits are proposed for high resolution and high image quality organic light‐emitting diode‐on‐silicon microdisplays. The proposed pixel circuits achieve high resolution due to simple pixel structure comprising three n‐type MOSFETs and one storage capacitor, which are integrated into a unit subpixel area of 3 × 9 µm² using a 90 nm CMOS process. The proposed pixel circuits improve image quality by compensating for the threshold voltage variation of the driving transistors and extending the data voltage range. To verify the performance of the proposed pixel circuits, the emission currents of 24 pixel circuits are measured. The measured emission current deviation error of the proposed pixel circuits A and B ranges from ?2.59% to +2.78%, and from ?1.86% to +1.84%, respectively, which are improved from the emission current deviation error of the conventional current‐source type pixel circuit when the threshold voltage variation is not compensated for, which ranges from ?14.87% to +14.67%. In addition, the data voltage ranges of the proposed pixel circuits A and B are 1.193 V and 1.792 V, respectively, which are 2.38 and 3.57 times wider than the data voltage range of the conventional current‐source type pixel circuit of 0.501 V.     

Controling color of liquid‐crystal displays

Abstract— Two newly derived characterization models for a liquid‐crystal (LC) display have been tested for five LC‐based displays. Data measured from a series of test colors indicated that all LC‐based displays showed similar characteristics, including an S‐shaped tone curve and poor channel chromaticity constancy. Because they include a hyperbolic function in their definition, the models do not have analytical inverses, and so iterative mathematical techniques are applied. It was shown that a new characterization model based on a hyperbolic function fits the tone curve very accurately with only four coefficients per channel for any type of LCD. In addition, it was also shown that the first derivative of the function provides a means of accurate correction of the chromaticity variation.     

Comb‐on‐plane switching electrodes for liquid‐crystal displays

Abstract— Although the common twisted‐nematic liquid‐crystal displays (TN‐LCD) has excellent contrast and low color dispersion, it suffers from small viewing angle when driven into the homeotropic state. Among the many techniques proposed, in‐plane switching (IPS) has been quite effective in improving viewing angle. However, there may be difficulty in adopting conventional IPS to higher‐definition displays because it suffers from limited storage capacitance and reduced transmittance. A new comb‐on‐plane switching (COPS) electrode design is proposed. Compared to conventional IPS, COPS allows for lower switching voltage and offers advantages including naturally scalable storage capacitance, wide viewing angle with TN‐like high transmittance, and low color dispersion.     

A photographic technique for assessing the viewing‐angle performance of liquid‐crystal displays

Abstract— Liquid‐crystal displays (LCDs) have notable variation in luminance and perceived contrast as a function of the angle from which they are viewed. Though this is an important performance issue for LCDs, most evaluation techniques for assessing this variation have been limited to laboratory settings. This study demonstrates the use of a photographic technique for such an evaluation. The technique is based on an actively cooled charge‐coupled‐device (CCD) detector in combination with a macro lens covering a circular angular range (θ) of ±42.5°. The camera was used to evaluate the luminance and perceived contrast properties of an LCD. Uniform field images corresponding to 17 equally spaced gray‐scale values in the digital driving level (DDL) range of the display system were acquired. The 12‐bit gray‐scale digital images produced by the camera were converted to luminance units (cd/m²) via the measured luminance vs. DDL response function of the camera. The changes in perceived contrast as a function of viewing angle were derived from the Barten model of the gray‐scale response of the human‐visual system using the methods proposed by the AAPM TG18 Report. The results of this photographic technique were compared to measurements acquired from a similar display using a Fourier‐optics‐based luminance meter. The results of the two methods generally agreed to within 5%. The photographic methods used were found to be accurate and robust for in‐field assessment of the angular response of LCDs over the FOV of the camera.     

A viewing‐angle‐controllable blue‐phase liquid‐crystal display

Abstract— A viewing‐angle‐controllable liquid‐crystal display (LCD) is proposed. When the device is only driven by an in‐plane electric field, it exhibits a wide‐viewing‐angle (WVA) mode. And it exhibits narrow‐viewing‐angle (NVA) mode when it is driven by a vertical electric field as well as an in‐plane electric field. In this manner, the viewing angle of the device can be controlled from 100° to 30°. The device exhibits a good viewing‐angle‐controlling characteristic and high transmittance.     

Electrically commanded surfaces: A new liquid‐crystal‐display concept

Abstract— Fast in‐plane switching of the optic axis was realized in liquid‐crystal displays (LCDs) based on the concept of Electrically Commanded Surfaces (ECS). According to this concept, the liquid‐crystal layer in such a display is aligned by means of thin ferroelectric liquid‐crystal‐polymer (FLCP) film deposited onto the inner side of the display substrates. An electric field, applied normal to the substrates, switches the molecules of the ferroelectric film, representing the commanded surface that, via elastic forces, further transfers to the liquid‐crystal layer. The concept of electrically commanded surfaces opens the door to a new generation of advanced LCDs exhibiting extraordinary performance such as fast in‐plane switching.     

Evaluation of liquid‐crystal‐display motion blur with moving‐picture response time and human perception

Abstract— The moving‐picture response time (MPRT) for measuring liquid‐crystal‐display (LCD) motion blur was studied by several organizations in 2001. To determine the LCD motion blur that humans perceive, subjective evaluation experiments using the method of adjustment was conducted to find a strong correlation between perceived motion blur and extended blurred edge time (EBET) of the MPRT measurements. MPRT thus clearly indicates the degree of which humans perceive motion blur.     

Optical rewritable liquid‐crystal‐alignment technology

Abstract— A new optical rewritable (ORW) liquid‐crystal‐alignment technology has been developed to create a display and to demonstrate its maturity and potential. ORW displays have no electrodes and use polarizers as substrates. The display requires no photolithography on plastic. Its simple construction secures durability and low cost for mass production. The on‐screen information is optically changed in a writing unit that consists of an LCD mask and an exposure source that is based on LEDs, low power, and low cost in comparison with Hg lamps or lasers. A high contrast image can be easily written, viewed, and rewritten through a polarizer, while the multi‐stable gray‐level image requires zero power to maintain the image. Reconfigurable LC alignment using ORW technology best suits plastic‐card displays as well as for LC photonics and various one‐mask processes of patterned LC‐alignment applications.     

Liquid‐crystal‐material technologies for advanced display applications

Abstract— Ions were dissolved into the liquid‐crystal (LC) materials from peripheral materials and were also generated by electric dissociation. Moreover, those ions are partly stabilized in the form of hydrated or solvated ions with polar molecules. As the ions in an LC slab of display panel deteriorate the image quality, it is essential that LC materials be free from mobile ions and be resilent to contamination by ions. Studies on the generation and behavior of ions in LC materials and their influence on display image quality were successfully applied to the development of advanced LC materials featuring high reliability and high purity, as well as low operational voltage, resulting in sophisticated LCDs with high image quality.     

Laser + LCOS projection‐technology revolution

Abstract— The advent of affordable direct‐diode lasers changes all the rules for optical designs and the associated technologies that generate the images from laser light. These new lasers are forseen as driving fundamental changes in the size, power consumption, cost, resolution, and even the uses for pico‐projectors. This paper discusses these topics from the perspective of laser‐light‐illuminated LCOS microdisplays.     

A continuous‐viewing‐angle‐controllable liquid‐crystal display using a blue‐phase liquid crystal

Abstract— A continuous‐viewing‐angle‐controllable liquid‐crystal display (LCD) using a blue‐phase liquid crystal is proposed. To realize both wide‐viewing‐angle (WVA) mode and narrow‐viewing‐angle (NVA) mode with a single liquid‐crystal panel, each pixel is divided into a main pixel and a subpixel. The main pixel is for displaying images in both modes. The subpixel is for displaying images in WVA mode and controlling the viewing angle in NVA mode. The device exhibits a good viewing‐angle‐controlling characteristic and high transmittance.     

Patterned liquid‐crystal laser film for multi‐dimensional multi‐color emissive film technology

Abstract— A two‐dimensional array consisting of dye‐doped reflection‐mode holographic‐polymer‐dispersed liquid crystal (H‐PDLC) lasers with alternating pitch lengths is presented. These post structures each reflect at a narrow bandwidth of light. The addition of laser dye to the H‐PDLC system allows for the generation of laser emission at the edge of the reflection band, or photonic band gap. In patterning these H‐PDLC post structures, a narrow‐linewidth patterned emissive color film is realized. The potential of such films and their implication in the display industry is discussed. In creating a three‐color array, an active emissive color film could replace the backlight and color filter components within the display. Such a patterned system would possess a wide color gamut, through spatial color synthesis, formed by narrow‐linewidth lasing structures with well‐defined wavelengths of emission.     

Review of operating principle and performance of polarizer‐free reflective liquid‐crystal displays

Abstract— In this paper the operational principle and performance of guest‐host, liquid‐crystal/polymer‐composite scattering, and cholesteric liquid‐crystal reflective displays are reviewed. These displays do not use polarizers and have the advantage of providing high reflectance and compatibility with flexible plastic substrates.     

Multi‐layered flat‐surface micro‐optical components directly molded on an LCD panel

Abstract— We have developed a process to fabricate optical components, such as a lens, prism, or diffuser, directly on to a glass substrate. Processes include precision mastering by diamond cutting and multi‐layer photopolymer (2P) molding to realize flat surfaces and the integration of multiple components with an alignment within a few micrometers.     

Photostable liquid‐crystal guest‐host nano‐materials for display applications

Abstract— We theoretically modeled the optical plasmon absorption of anisotropic metallic nanoparticles in a liquid‐crystal host medium. Metallic nanorods and spheroids act as pleochroic dopants with virtually unlimited photostability. Calculations predict that full‐color displays based on nanorod orientation driven by the transition from homogeneous to homeotropic LC alignment are feasible. These displays are expected to have large viewing angles without the need for polarizers or LC anchoring surfaces.     

A multistable smectic‐A liquid‐crystal device with low threshold field

Abstract— A multistable liquid‐crystal device has been realized in this study; its smectic‐A LC is oriented by in‐plane and out‐of‐plane electric fields with various amplitudes. This paper introduces improvements made to electrode structure and hybrid surface treatments that have enhanced SmA LC device performance. The driving voltage of the hybrid‐aligned cell has been reduced to 20% of the vertical‐aligned one, and light leakage has been suppressed by out‐of‐plane electric‐field‐strength modulation. The many advantages of this multi‐stabilized LC device could be applied to memory devices and to flexible displays.     

Fast‐response liquid‐crystal displays using crossed fringe fields

Abstract— A fast‐response and wide‐view liquid‐crystal display (LCD) using the crossed fringe‐field‐switching (CFFS) mode is proposed, where the fringe‐field electrodes exist on both the top and bottom substrates. The bottom fringe field is used to turn on the LC directors and the top fringe field is used to assist in the LC decay process. The decay time is reduced by ～2× compared to that of the conventional FFS mode between the full bright and dark states, and more than a 2× improvement is obtained for other gray‐scale transitions. This CFFS mode also preserves the wide‐view characteristics as the conventional FFS mode. Its applications to LCD TVs and monitors for reducing image blur are addressed.     

A field‐sequential‐color display with a local‐primary‐desaturation backlight scheme

Abstract— Field‐sequential‐color technology eliminates the need for color filters in liquid‐crystal displays (LCDs) and results in significant power savings and higher resolution. But the LCD suffers from color breakup, which degrades image quality and limits practical applications. By controlling the backlight temporally and spatially, a so‐called local‐primary‐desaturation (LPD) backlight scheme was developed and implemented in a 180‐Hz optically compensated bend (OCB) mode LCD equipped with a backlight consisting of a matrix of light‐emitting diodes (LEDs). It restores image quality by suppressing color breakup and saves power because it has no color filter and uses local dimming. A perceptual experiment was implemented for verification, and the results showed that a field‐sequential‐color display with a local‐primary‐desaturation backlight reduced the color breakup from very annoying to not annoying and even invisible.     

Ultra‐fast‐switching flexoelectric liquid‐crystal display with high contrast

Abstract— The flexoelectro‐optic effect provides a fast‐switching mechanism (0.01–0.1 msec), suitable for use in field‐sequential‐color full‐motion‐video displays. An in‐plane electric field is applied to a short‐pitch chiral nematic liquid crystal aligned in the uniform standing helix (or Grandjean) texture. The switching mechanism is experimentally demonstrated in a single‐pixel test cell, and the display performance is investigated as a function of device parameters. A contrast ratio of 2000:1 is predicted.