共查询到18条相似文献,搜索用时 468 毫秒
1.
低压铸造CAE软件的开发及应用 总被引:1,自引:0,他引:1
介绍了低压铸造数值模拟的原理、思路以及低压铸造CAE的应用,并给出了一个铝合金蜗壳铸件和汽车轮毂的低压铸造应用实例。采用华铸CAE低压模块对低压铸件充型凝固过程进行模拟的结果与实际符合较好。实际应用表明,低压铸造CAE能有效地评判低压铸造工艺设计的合理性,提高工艺设计效率。 相似文献
2.
3.
基于铸造数值模拟技术,对壁薄、尺寸大、凹坑复杂的壳体铸件低压铸造的改进工艺进行了充型及凝固过程仿真,预测了缺陷的分布;通过生产确认了优化方案的合理性. 相似文献
4.
结合铸件质量要求,基于铸造数值模拟技术,分析了低压铸造的充型凝固过程,预测了铸件中的缺陷分布;最终通过试制,确保了压气室低压铸件质量,为该件的顺利生产奠定了基础. 相似文献
5.
6.
7.
8.
低压铸造铝合金轮毂的凝固模拟及实验验证 总被引:5,自引:0,他引:5
应用自行开发的低压铸造凝固模拟软件模拟低压铸造铝合金轮毂的凝固过程。模拟结果与生产结果相吻合。模拟过程中记录的铸型中各点的温度曲线与现场测试所得的铸型中相应点的实际温度曲线基本吻合,证明了模拟结果的准确性。 相似文献
9.
10.
梁彩云 《中国铸造装备与技术》2005,104(4):37-39
介绍了采用凝固数值模拟技术对柴油发动机缸体铸件进行的凝固过程温度场数值模拟.结果表明,数值模拟计算结果与实际生产情况基本一致.对于企业如何利用计算机凝固模拟技术来改进和优化铸造工艺,提高铸件产品质量,缩短新产品试制周期,降低生产成本,提高企业经济效益,具有一定的现实意义和理论指导意义. 相似文献
11.
1. IntroductionNumerical simulation of casting process is a technologyto reconstruct and advance the traditional foundry industryby using computer technology. It has important effect onreducing production cost and improving competitiveability of foundry industry. Its application and popularizat-ion will bring great economic benefits and social benefitsfor both foundry industry and society.This paper introduced the function modules of InteCASTsoftware and some new techniques adopted by InteC… 相似文献
12.
13.
本文就铝合金罐体的主要铸造方法(即砂型铸造、砂型低压铸造、金属型砂芯低压铸造、金属型低压铸造和V法铸造)所涉及的设备、模具和工艺方面的技术要点进行分析和探讨。 相似文献
14.
采用实验和数值模拟方法,对ZL205A铝合金筒形壳体铸件在低压铸造时出现的线状偏析的形成机理及预测模型进行研究。利用数值模拟技术对该铸件在凝固期间的传热进行分析,通过大量实际低压铸造获得ZL205A合金铸件中产生的线状偏析信息、铸件低压铸造过程的温度场以及线状偏析形成部位凝固参数的变化规律,提出了ZL205A合金低压铸造过程线状偏析的形成机理和判据。研究表明,ZL205A合金铸件的线状偏析是由于铸件在凝固后期,浇注系统尚能进行补缩,此时铸件局部形成热裂,高浓度的溶质在补缩压力的作用下对该热裂填充而最终在该部位形成线状偏析。根据分析得出形成机理,得到消除线状偏析的工艺控制方法。采用线状偏析判据对其它铸件的线状偏析进行模拟预测,预测结果与实际浇注结果的对比表明,该判据能够较为准确地预测ZL205A合金筒形壳体铸件的线状偏析位置。 相似文献
15.
Shrinkage defects can be formed easily at critical location during low pressure die casting (LPDC) of aluminum alloy cylinder body. It has harmful effect on the products. Mold filling and solidification process of a cylinder body was simulated by using of Z-CAST software. The casting method was improved based on the simulation results. In order to create effective feeding passage, the structure of casting was modified by changing the location of strengthening ribs at the bottom, without causing any adverse effect on the part's performance. Inserting copper billet at suitable location of the die is a valid way to create suitable solidification sequence that is beneficial to the feeding. Using these methods, the shrinkage defect was completely eliminated at the critical location. 相似文献
16.
《International Journal of Cast Metals Research》2013,26(1-4):330-333
AbstractThe objective of this study is to clarify effects of high pressure die casting process parameters for castability and mechanical properties. So the optimal die casting conditions for producing for thin walled Al component was conducted computational solidification simulation and actual die casting with three different venting systems, four straight, checker and full checker vent. Furthermore, the die casting process parameters, such as die controller temperature, high injection speed and die open time, were experimentally evaluated. The results of computational solidification simulation were found that the control of process parameters could lead to soundness of surface and no defect and improvement of mechanical properties. As increasing the high injection speed from 2˙0 to 4˙0 m s?1 and die temperature, the castability was increased. The full checker venting system had best castability with good surface quality among the three cast specimens. 相似文献
17.
汽车轮毂低压铸造凝固过程模拟研究 总被引:4,自引:0,他引:4
以铝合金轮毂生产为背景,利用有限差分原理开发出适应于复杂工艺的凝固模拟软件。该程序综合考虑低压铸造中边界换热的复杂情形,即对不同的边界单元,采用不同的换热方式。对工艺流程采取了分段处理的方式以加快计算速度,并针对多风道工艺的处理提出了相应的解决办法。对一个实际生产的轮毂进行了凝固过程模拟,所得结论与实际基本符合。 相似文献
18.
镁合金轮毂低压铸造数值模拟及缺陷预测 总被引:1,自引:1,他引:0
以某镁合金汽车轮毂为研究时象,运用专业铸造模拟分析软件,进行低压铸造数值模拟,研究了填充和凝固过程中温度场的分布,预测了在此过程可能出现的缺陷.模拟结果显示.轮毂中心部位也可能产生缩松,并发现通过降低或者提高充型速度并不能有效解决问题,通过在模具上模增加局部冷却水道,能够较好地改善整体冷却顺序,有效减小轮毂中心的缩松现象. 相似文献