Macroalgae: Raw material for biodiesel production

The objective of this paper is to study marine macroalgae as an alternative raw material for the biodiesel production. The obtained results show that biodiesel production from oil extracted from marine algae is feasible by transesterification. Oil extraction can be carried out simultaneously with the transesterification. To investigate the optimum reaction conditions, the reaction was carried out at various methanol to oil molar ratios, catalyst concentrations and reaction temperatures. The process yields 1.6–11.5% depending on the reaction conditions. Moreover, the properties of macroalgae transesterification residue after transesterification were analyzed, concluding that it is a suitable material for fuel pellets manufacturing.     

Two different kinds of processes for biodiesel production from Chinese cottonseed

Alkali-catalyzed and supercritical methanol transesterification were used to produce biodiesel from Chinese cottonseed. Fourier transform infrared and gas chromatography/mass spectrometry were used to identify the compositions of cottonseed oil biodiesel samples. Six major compositions of the biodiesel samples were identified by the retention time and the fragmentation pattern data of GC/MS analysis. The yields of biodiesel samples obtained from alkali-catalyzed reaction and supercritical methanol transesterification were 98.4 and 99%, respectively. In comparison to the alkaline transesterification, the supercritical methanol transesterification combining with two-phase extraction was more suitable for biodiesel production due to shorter reaction time, less purification steps, and lower cost.     

Optimization of biodiesel production from camelina oil using orthogonal experiment

Camelina oil is a low-cost feedstock for biodiesel production that has received a great deal of attention in recent years. This paper describes an optimization study on the production of biodiesel from camelina seed oil using alkaline transesterification. The optimization was based on sixteen well-planned orthogonal experiments (OA₁₆ matrix). Four main process conditions in the transesterification reaction for obtaining the maximum biodiesel production yield (i.e. methanol quantity, reaction time, reaction temperature and catalyst concentration) were investigated. It was found that the order of significant factors for biodiesel production is catalyst concentration > reaction time > reaction temperature > methanol to oil ratio. Based on the results of the range analysis and analysis of variance (ANOVA), the maximum biodiesel yield was found at a molar ratio of methanol to oil of 8:1, a reaction time of 70 min, a reaction temperature of 50 °C, and a catalyst concentration of 1 wt.%. The product and FAME yields of biodiesel under optimal conditions reached 95.8% and 98.4%, respectively. The properties of the optimized biodiesel, including density, kinematic viscosity, acid value, etc., were determined and compared with those produced from other oil feedstocks. The optimized biodiesel from camelina oil meets the relevant ASTM D6571 and EN 14214 biodiesel standards and can be used as a qualified fuel for diesel engines.     

Biodiesel production from renewable feedstocks: Status and opportunities

The increased demand for energy, climate change, and energy security concerns has driven the research interest for the development of alternative fuel from plant origin. Biodiesel derived from plant oils, which include edible and non-edible oil have gained interest for the last two decades as alternative for diesel around the world. Among these plant origin oils more than 95% of biodiesel production feedstocks come from edible oils, because they are readily available in many regions. The major advantage of these feedstocks is the properties of biodiesel produced from them are suitable to be used as diesel fuel substitute. But the consequence is the increase demand of the feedstock for food as well as fuel. A sustainable alternative fuel should be derived from renewable non-food biomass sources. The main objective of this review is to give an overview on the synthesis of biodiesel through esterification and transesterification using non-edible oil resources which are available in India, and available processes for synthesis of biodiesel (acid-, base-catalyzed transesterification reactions (homogeneous and heterogeneous), their importance, and which is the commercial process also discussed here.     

Production and evaluation of biodiesel from mixed castor oil and waste chicken oil

Biodiesel was developed from an unconventional feedstock, i.e. an equivalent blend of castor bean and waste chicken oil through the alkaline-catalyzed transesterification with methanol. The process variables including the alkaline catalyst concentration, methanol to oil molar ratio, reaction temperature, reaction time, and the alkaline catalyst type were investigated. The highest yield of biodiesel (97.20 % ~ 96.98 % w/w ester content) was obtained under optimum conditions of 0.75 % w/w of oil, 8:1 methanol to oil molar ratio, 60°C temperature, and a duration of 30 min. Properties of the produced biodiesel satisfied those specified by the ASTM standards. The results thus indicated that the suggested blend oils are suitable feedstock for the production of biodiesel. The process was found to follow pseudo first-order kinetics, and the activation energy was found to be 8.85 KJ/mole.     

Biodiesel production over copper vanadium phosphate

In the present study, copper vanadium phosphate (CuVOP) with three-dimensional network structure was synthesized by hydrothermal method, and was characterized by Infrared spectrum (IR), elemental analysis (EA), EDXRF (energy dispersive X ray fluorescence) etc. Moreover, soybean oil was used as feedstock for producing biodiesel, and biodiesel was produced by CuVOP-catalyzed transesterification process. Response surface methodology was employed to statistically evaluate and optimize the conditions for the maximum conversion to biodiesel, and the effects of amount of catalyst, ratio of methanol to oil, reaction time and reaction temperature were investigated by the 2⁴ full-factorial central composite design. The maximum conversion is obtained at amount of catalyst of 1.5%, methanol/oil molar ratio of 6.75, reaction temperature of 65 °C and reaction time of 5 h. Copper vanadium phosphate CuVOP resulted very active in the transesterification reaction for biodiesel production.     

Transesterification of marine macroalgae using microwave technology

Biodiesel is renewable and environmental friendly, with calori?c value equivalent to regular fossil fuel. This fuel can be produced from a variety of feedstocks, such as ?rst-generation biodiesel feedstock (corn, peanut, soybean), second generation (jatropha, animal fats, waste cooking oils, macroalgae), and third generation (microalgae). Among these feedstocks, biodiesel production from microalgae has drawn special attention for different reasons: they have high lipid content and high growth rates; they are tolerant to severe environmental conditions; they offer the possibility of sequester carbon dioxide from the ?ue gases; their harvesting and transportation are economical compared to other crops; and they have very high photosynthetic yields compared to other terrestrial plants. The advantage of using macroalgae recollected on the beaches as raw material is that allows to obtained energy from a residue.

Microwave-assisted extraction and transesteri?cation of microalgae is being researched as a solution for biodiesel production by its benefits, such as shorter reaction times and less amount of heat energy to obtain biodiesel. It is due to the fact that microwaves can easily penetrate through the cell wall structure to extract and transesterify the oils into biodiesel.

The aim of this research was to explore the possibility of carrying out the microwave-assisted transesterification of three marine macroalgae (brown and green). Different experimental runs were carried out with different process parameters such as macroalgae-to-methanol ratio, reaction time and catalyst concentrations. Based on the obtained results, the best conditions for microwave-assisted transesteri?cation reaction were macroalgae-to-methanol ratio of 1:15 (wt/vol), sodium hydroxide concentration of 2 wt% and reaction time of 3 min.     

Eco-friendly biodiesel production from olive oil waste using solar energy

This study was carried out to produce biodiesel from olive oil waste by transesterification reaction. Several important reaction variables (the weight ratio of oil to methanol, the temperature, and reaction time) were evaluated to obtain a high quality of biodiesel fuel that meets authentic standards. Solar energy was applied for the transesterification reaction and electricity generated by photovoltaic panels was used to power a motor for mixing the reaction solution.     

Analysis and evaluation of operating variables for the yield of Karanja and neem oil-based biodiesel production

The aim of this research is to present the possibilities of the use of non-edible oils in biodiesel production, to consider the various methods for treatment of non-edible oils and to emphasise the influence of the operating and reaction conditions on the process rate and the ester yield. Because of biodegradability and non-toxicity biodiesel has become more attractive as alternative fuel. Biodiesel is produced mainly from vegetable oils by transesterification. For economic and social reasons, edible oils should be replaced by lower-cost and reliable feedstock for biodiesel production, such as non-edible plant oils. In this work biodiesel is produced from neem and Karanja by using butanol, propanol, ethanol and methanol as alcohols and KOH and NaOH as alkali catalysts by the transesterification process. The aim of this research is to analyse the different reaction parameters such as catalyst concentration, type of catalyst, types of alcohol, alcohol to oil molar ratio, reaction time and reaction temperature on the yield of biodiesel from non-edible oils. The maximum yield obtained was 95% with Karanja as oil with methanol and KOH as alkali catalyst at oil to alcohol molar ratio of 6:1 in 1 h at 60°C. Special attention is paid to the possibilities of producing biodiesel from non-edible oils.     

我国生物质能源现代化应用前景展望(二)——生物质制备液体燃料的转化途径

利用可再生生物质资源转化制备液体燃料已成为全球关注的热点。常见的生物质能源原料主要有草本植物、木本植物、微藻和脂肪类生物质资源,丰富的生物质资源为生物质液体燃料的生产提供了广泛的原料来源,也为生物质能源的多样性发展提供了坚实的物质基础。不同的生物质原料种类和转化方式可生产出性能各异的多种液体燃料,主要包括醇类燃料(乙醇、丁醇等)、烃类燃料和生物柴油等,由此构建出生物质转化制备液体燃料的转化途径网络。醇类燃料的生物质转化途径主要包括生物质直接发酵、生物质合成气发酵、生物质合成气化学合成等;烃类燃料的生物质转化途径主要有生物质液化加氢、微藻热化学途径、生物质合成气费托合成、生物质发酵脂肪酸加氢及油脂类加氢途径等;生物柴油的转化途径主要有油脂酯交换和微藻萃取酯交换。在这些液体燃料的转化途径中,只有生物质发酵制乙醇途径和油脂酯交换途径基本实现了商业化应用,其他大部分转化途径仍处于开发阶段。     

Production of biodiesel from food processing waste using response surface methodology

The optimum conditions for biodiesel production by the transesterification of waste oil form the pork grilling process in the food factory in Udon Thani, Thailand, using NaOH and KOH as catalysts, has been investigated. A Box–Behnken Design (BBD) followed by a Response Surface Methodology (RSM) with 30 runs was used to assess the significance of three factors: the methanol to oil molar ratio, the amount of NaOH and KOH used, and the reaction time required to achieve the optimum percent fatty acid methyl ester (%FAME). The measured %FAME following transesterification using NaOH as a catalyst was an optimum 95.6% with a methanol to oil molar ratio of 12.2:1, a NaOH percentage mass fraction of 0.49% and a reaction time of 63 min. Using KOH as a catalyst, the %FAME was an optimum 93.0% with a methanol to oil molar ratio of 12:1, a KOH percentage mass fraction of 0.61% and a reaction time of 72 min. The coefficient of determination (R²) for regression equations were 98.55% and 93.99%, respectively. The probability value (P<0.05) demonstrated a very good significance for the regression model. The physicochemical properties of the biodiesel obtained from the waste oil met the ASTM 6751 biodiesel standard, illustrating that waste oil from the pork grilling process can be used as a raw material for biodiesel production by transesterification.     

Alkaline-catalyzed transesterification of Silurus triostegus Heckel fish oil: Optimization of transesterification parameters

The present work reports the production of biodiesel from Silurus triostegus Heckel fish oil (STFO) through alkaline-catalyzed transesterification by using potassium hydroxide (KOH) as an alkaline catalyst with methanol. Chemical and physical properties of the extracted oil were determined. It was found that STFO has a low acid value (1.90 mg KOH/g oil); hence no pre-treatment such as acid esterification is required to produce the biodiesel. The influence of the experimental parameters such as KOH concentration (0.25–1.0% w/w of oil), methanol to oil molar ratio (3:1, 6:1, 9:1 and 12:1), reaction temperature (32, 45 and 60 °C), reaction duration (30, 60, 90 and 120 min), type of the catalyst (potassium or sodium hydroxide) and step multiplicity (single- and two-step transesterification) on the yield of the biodiesel were investigated. The maximum biodiesel yield (96%) was obtained under the optimized parameters of the transesterification (KOH 0.50% w/w, 6:1 methanol to oil, at 32 °C for 60 min). The properties of the produced biodiesel were found to conform with the ASTM standard, indicating its suitability for internal combustion engines. Blending of the produced biodiesel with petro diesel with various volume percentages was investigated as well.     

Production of biodiesel from Citrus limetta seed oil

The production of biodiesel from edible oils may cause negative impact to any country through food crisis which may lead to economic imbalance. Hence, this study focuses on viability of extracting the oil from the Citrus limetta seeds for biodiesel production for the first time. Composition of C. limetta oil was determined by gas chromatography. C. limetta biodiesel was produced by simple transesterification process, and further physiochemical properties were analyzed as per the standards. This study also describes the suitable characterization and optimization parameters used for conversion of C. limetta seed oil into biodiesel.     

Biodiesel production from waste cooking oil using heterogeneous catalysts and its operational characteristics on variable compression ratio CI engine

In the present work, the optimum biodiesel conversion from waste cooking oil to biodiesel through transesterification method was investigated. The base catalyzed transesterification under different reactant proportions such as the molar ratio of alcohol to oil and mass ratio of catalyst to oil was studied for optimum production of biodiesel. The optimum condition for base catalyzed transesterification of waste cooking oil was determined to be 12:1 and 5 wt% of zinc doped calcium oxide. The fuel properties of the produced biodiesel such as the calorific value, flash point and density were examined and compared to conventional diesel. The properties of produced biodiesel and their blend for different ratios (B20, B40, B60, B80 and B100) were comparable with properties of diesel oil and ASTM biodiesel standards. Tests have been conducted on CI engine which runs at a constant speed of 1500 rpm, injection pressure of 200 bar, compression ratio 15:1 and 17.5, and varying engine load. The performance parameters include brake thermal efficiency, brake specific energy consumption and emissions parameters such as Carbon monoxide (CO), Hydrocarbon (HC), Oxides of Nitrogen (NOx) and smoke opacity varying with engine load (BP). Diesel engine's thermal performance and emission parameters such as CO, HC, and NOx on different biodiesel blends demonstrate that biodiesel produced from waste cooking oil using heterogeneous catalyst was suitable to be used as diesel oil blends and had lesser emissions as compared to conventional diesel.     

Pumpkin (Cucurbita pepo L.) seed oil as an alternative feedstock for the production of biodiesel in Greece

In recent years, the acceptance of fatty acid methyl esters (biodiesel) as a substitute to petroleum diesel has rapidly grown in Greece. The raw materials for biodiesel production in this country mainly include traditional seed oils (cotton seed oil, sunflower oil, soybean oil and rapeseed oil) and used frying oils. In the search for new low-cost alternative feedstocks for biodiesel production, this study emphasizes the evaluation of pumpkin seed oil. The experimental results showed that the oil content of pumpkin seeds was remarkably high (45%). The fatty acid profile of the oil showed that is composed primarily of linoleic, oleic, palmitic and stearic acids. The oil was chemically converted via an alkaline transesterification reaction with methanol to methyl esters, with a yield nearly 97.5 wt%. All of the measured properties of the produced biodiesel met the current quality requirements according to EN 14214. Although this study showed that pumpkin oil could be a promising feedstock for biodiesel production within the EU, it is rather difficult for this production to be achieved on a large scale.     

Biodiesel synthesis from Hevea brasiliensis oil employing carbon supported heterogeneous catalyst: Optimization by Taguchi method

The present work illustrates the parametric effects on biodiesel production from Hevea brasiliensis oil (HBO) using flamboyant pods derived carbonaceous heterogeneous catalyst. Activated carbon (AC) was prepared maintaining 500 °C for 1 h and steam activated at optimised values of activation time 1.5 h and temperature 350 °C. Carbonaceous support was impregnated with KOH at different AC/KOH ratios. The transesterification process was optimized and significant parameters affecting the biodiesel yield was identified by Taguchi method considering four parameters viz. reaction time, reaction temperature, methanol to oil ratio and catalyst loading. The physicochemical properties of Hevea brasiliensis methyl ester (HBME) were examined experimentally at optimised condition and found to meet the global American standards for testing and materials (ASTM). The optimum condition observed to yield 89.81% of biodiesel were: reaction time 60 min, reaction temperature 55 °C, catalyst loading 3.5wt% and methanol to oil ratio 15:1. Contribution factor revealed that among four parameters considered, catalyst loading and methanol to oil ratio have more prominent effect on biodiesel yield. The cost for preparing carbonaceous catalyst support was estimated and observed to be fairly impressive. Thus, Hevea brasiliensis oil (HBO) could be considered as suitable feedstock and flamboyant pods derived carbon as effective catalyst for production of biodiesel.     

Improved transesterification of waste cooking oil into biodiesel using calcined goat bone as a catalyst

In this study, potassium hydroxide-treated animal bones were employed? as a solid heterogeneous catalyst in transesterification of waste cooking oil. This catalyst was characterized by the Fourier-transform infrared spectroscopy (FTIR), and it displayed high-catalytic activity for biodiesel production. Optimum conditions for biodiesel production were catalyst loading 6.0% (w/w) of oil, methanol/oil molar ratio 9:1, calcination temperature 800°C, reaction temperature 65°C, and reaction time of 5 h, which gave maximum biodiesel yield of 84%. Reusability of the catalyst was also confirmed by repeated use of the same catalyst three times without losing much of its activity. Hence, calcined goat bones were found to be a potentially applicable catalyst for biodiesel production at industrial scale.     

Quality analysis studies on biodiesel production of neochloris oleoabundans algae

The petroleum fuels play a major role in industry, agriculture, and transport besides meeting out many other basic human needs. However, fossil fuels are limited in quantity and are depleting day by day as the consumption is increasing very rapidly. Biodiesel is one such fuel in which there is a lot of hope. In the recent past, biodiesel received considerable attention as a renewable fuel. In India, it has not been possible to produce biodiesel from edible oils since the same is very scarce. Hence, the scope of opting to non-edible oils from plants as raw material for biodiesel production recently gained momentum. This paper presents the production of biodiesel from nonedible, Neochloris oleoabundans oil and its characterization. The studies were carried out on transesterification of oil with methanol, sodium hydroxide, and Sodium methoxide as catalyst for the production of biodiesel. The process parameters such as catalyst concentration, reaction time, and reaction temperature were optimized for the production of Neochloris oleoabundans oil biodiesel. The biodiesel yield of 95.15% was noticed at optimal process parameters.     

Biodiesel from low cost feedstocks: The effects of process parameters on the biodiesel yield

Biofuel (e.g. biodiesel) has attracted increasing attention worldwide as blending component or direct replacement for fossil fuel in fuel energized engines. The substitution of petroleum-based diesel with biodiesel has already attained commercial value in many of the developed countries around the world. However, the use of biodiesel has not expanded in developing countries mostly due to the high production cost which is associated with the expensive high-quality virgin oil feedstocks. This research focuses on producing of biodiesel from low cost feedstocks such as used cooking oil (UCO) and animal fat (AF) via alkaline catalyzed transesterification process investigating the effects of process parameters, for example (i) molar ratio of feedstock to methanol (ii) catalyst concentration (iii) reaction temperature and (iv) reaction period on the biodiesel yield. The biodiesel was successfully produced via transesterification process from low cost feedstocks. It was also observed that the process parameters directly influenced the biodiesel yield. The optimum parameters for maximum biodiesel yields were found to be methanol/oil molar ratio of 6:1, catalyst concentration of 1.25 wt% of oil, reaction temperature of 65 °C, reaction period of 2 h and stirring speed of 150 rpm. The maximum biodiesel yields at the optimum conditions were 87.4%, 89% and 88.3% for beef fat, chicken fat and UCO, respectively. The results demonstrate high potential of producing economically viable biodiesel from low cost feedstocks with proper optimization of the process parameters.     

Characteristics analysis of carbon nanowires in diesel: Neochloris oleoabundans algae oil biodiesel–ethanol blends in a CI engine

The present work is dedicated to the study of diesel–biodiesel–ethanol blends in a diesel engine using carbon nanowires additives of various concentrations. Algae oil from microalgae has the possibility of becoming a sustainable fuel source as biodiesel. The Neochloris oleoabundans algal oil was extracted by the mechanical extraction method. The transesterification reaction of algal oil with methanol and base catalyst was used for the production of biodiesel. Experimental investigation results were studied for various parameters such as exhaust emission of carbon monoxide, hydrocarbon, oxides of nitrogen gases, and smoke.