首页 | 官方网站   微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 437 毫秒
1.
张绪玉  罗永春  王大辉  闫汝煦  章应  康龙 《功能材料》2005,36(7):1034-1037,1040
研究了Al元素对合金La0.67Mg0.33Ni3.0中Ni的替代对舍金的微观组织结构及电化学性能的影响。X射线衍射(XRD)分析结果表明La0.67Mg0.33Ni3.0合金由PuNi3型(La,Mg)Ni3相和Ce2Ni2型(La,Mg)2Ni7相组成,Al元素加入后,开始出现CaCu5型LaNi5相,随着Al含量的增加,LaNi5相逐渐增多,当x=0.3时,LaNi5相成为合金的主相,合金La0.67Mg0.33Ni3.0中Al的X荧光元素面分布图像表明了Al元素主要进入LaNi5相中,说明Al是一种LaNi5相形成元素;电化学测试表明,随着Al含量的增加,合金的最大放电容量依次下降,4种合金的最大放电量分别为392、324、267和252mAh/g,活化次数变化不大(2~3次即可活化),循环稳定性先增加后下降。  相似文献   

2.
研究了铸态 Ni_3Al 合金及其微晶溅射涂层在1000—1100℃下等温氧化性能及1000℃下的循环氧化性能。结果表明:铸态 Ni_3Al 合金在氧化过程中形成 Al_2O_3,NiO 和 NiAl_2O_4 的复杂氧化膜;微晶 Ni_3Al涂层在氧化过程中形成α—Al_2O_3和 NiAl_2O_4尖晶石,不含 NiO,这种氧化膜的保护作用比含 NiO 的氧化膜的保护作用好,使得其氧化增重比铸态合金小约1半。此外铸态 Ni_3Al 合金在氧化过程中沿粗大晶界发生严重的内氧化,且表面氧化膜较脆易发生剥落;微晶 Ni_3Al 涂层可以消除沿晶界的内氧化,氧化膜与基体粘附良好,未发现剥落现象。微晶化大大提高了 Ni_3Al 合金的抗氧化性能。  相似文献   

3.
卢旭东  陈涛 《功能材料》2015,(4):4025-4030
采用X射线衍射(XRD),扫描电镜(SEM)及能谱(EDAX)等方法,研究了Cr5.0 Co8.0 Mo0.9W5.5 Ta7.4 Al6.0 Re4.2合金在900和1 000℃的氧化行为。结果表明,氧化动力学曲线遵循氧化初期氧化增重速率较快,氧化期间氧化动力学曲线呈波浪式变化,且呈现氧化温度越高波浪式越明显的特征。在900℃氧化300 h后合金表面氧化物膜分为3层,外层为Ni O、Ni2Cr2O4、Ni2Co O4和Cr Ta O4;中间层为平直的Al2O3层,内氧化层为Al2O3,氧化期间,分布在外层的Cr Ta O4抑制基体中Al向外扩散,并抑制氧化膜的生长,使氧化速度降低。1 000℃时合金表面的氧化物膜分为2层,外层为Ni O、Ni2Cr2O4、Ni2Co O4和Cr Ta O4;内氧化层为Al2O3。在900和1 000℃氧化期间,合金均发生元素Al的内氧化和内氮化,与外氧化膜相邻的区域为元素Al的内氧化区,远离外氧化膜的基体内部形成元素Al的内氮化区,随氧化温度升高,内氧化区和内氮化区的深度增加,内氧化物和内氮化物的尺寸增大。  相似文献   

4.
利用包埋渗结合化学镀技术在铌合金表面制备了复合涂层,研究了涂层在退火过程中的元素扩散行为及涂层的高温抗氧化性能。结果表明:复合涂层以晶态Ni和Al_3Nb相为主;退火过程中渗层中的Al元素向外扩散,涂层转变为晶态,形成了Ni Al_3、Al_3Nb、Ni Al相。对退火前后的涂层进行1000℃恒温氧化实验,20 h后沉积态涂层的增重为7.7 mg/cm~2,表面主要含Ni O、Al_2O_3、Ni Al相;退火态涂层样品的增重为4.9 mg/cm~2,表面生成了Al_2O_3、NiNb_2O_6、NiAl_2O_4等相。氧化后涂层与基体结合良好。退火态涂层表面由于富Al元素,氧化后形成较多的Al_2O_3,比沉积态的涂层能更有效地减缓氧化进程,提高铌合金的抗氧化性。  相似文献   

5.
通过对有/无Ni11Co26Cr6Al0.5Y涂层镍基合金在1000℃进行氧化动力学曲线测定,及组织结构观察,研究了Ni11Co26Cr6Al0.5Y涂层对镍基合金高温氧化行为的影响。结果表明:高温氧化期间,合金发生外氧化和内氧化,外氧化层由NiO、NiCrO_4、CoWO_4构成,中间氧化物由TiO_2、Al_2O_3、NiWO_4构成,中间层氧化物层抑制了基体中Al元素向外扩散,形成平直连续的Al_2O_3内氧化物层;合金氧化动力学曲线呈现起伏波动的特征。镍基合金经溅射Ni11Co26Cr6Al0.5Y涂层,可有效改善合金的抗氧化性能;涂层的氧化动力学曲线仅在氧化初期有轻微增重而后趋于平稳,遵循抛物线规律,其形成的Al_2O_3氧化膜未发生明显剥落,仅在涂层内及近涂层/基体界面区域存在少量Al_2O_3内氧化物。  相似文献   

6.
利用原位 AES深度分析 ,XRD,和 XPS方法研究了 Ti- 2 Al- 2 .5 Zr合金在 30 0℃碱性水中氧化 130 0 0 h所形成的氧化膜的结构、成分和价态 ,及其随深度的变化。结果表明 ,氧化膜是由板钛型 Ti O2 、Al2 Ti O5(Ti O2 ·Al2 O3) ,Ti3O5,Ti2 O3和 Ti O所组成 ,氧化膜由表面到基体基本是按以上顺序交迭构成。通过 XPS和原位 AES分析发现钛合金表面形成由 Ti O2 ,Al2 Ti O5(Ti O2 ·Al2 O3) ,Ti3O5组成的较为稳定的厚约 80 0 nm的 Ti4 + (Ti O2 )层 ,随深度的增加出现了 Ti3+ (Ti3O5,Ti2 O3)和 Ti2 + (Ti O) ,直至基体 ,氧化膜总厚度约 30 0 0 nm。  相似文献   

7.
本文对含Ni42~46%的康铜合金在大气中于600~870℃加热时的氧化过程进行了研究。通过对加热几h到600h的样品分析,实验结果证实了康铜合金在大气下的高温氧化首先形成NiO,当Cu-Ni合金固溶体中的Ni几乎全被氧化时,才形成Cu_2O,随着氧不断进入氧化层,Cu_2O再度被氧化,形成CuO。  相似文献   

8.
研究了电子束、离子束作用于Al2O3表面时成分的变化,表明无论电子束或离子束都能使Al2O3发生分解,产生导电的元素Al。实验在PHI610·SAM上进行,电子束轰击下(3keV,O.5μA,入射角60°)10s就有元素Al分解出来,2min以后就达到饱和,分解析出量随时间成a(1-e-bt)的关系。离子束轰击下同样发生元素Al的分解,但当Ei>3keV时,由于剥离速率加大,溅射5min时表面Al峰反而比1min时要弱。这时表面Al含量处于分解析出与溅射剥离的动态平衡中。实验还发现了Al2O3的解析与表面成分有关(如碳的含量)。最后讨论电子束与离子束的解析机理。  相似文献   

9.
采用正交设计的实验方法探讨了铬、铝、硅元素含量对铁基高温合金抗氧化性的影响规律。为获得稳定的抗氧化能力,上述各元素的含量应分别高于17%Cr,4%Al,1.5%Si。结果表明:当三元素同原子比时对铁基高温合金抗氧化性的影响次序为Si最大,Al次之,Cr最小。结构平坦、组织致密、颗粒细小均匀的氧化膜抗氧化性较好,反之较差。当氧化膜由Cr2O3,Al2O3,SiO2,Fe(Ni)Cr2O4多种氧化物组成复合氧化膜时于1250℃表现为强抗氧化性,当缺少Al2O3或SiO2时表现为弱抗氧化性。  相似文献   

10.
La-Mg-Ni基超晶格储氢合金与传统AB5型合金相比,具有优越的电化学容量,近年来受到研究者们的广泛关注,但是其合金相组成复杂,综合电化学性能尤其是循环稳定性有待提高.本工作通过将A2B7型La0.75Mg0.25Ni3.5合金在1203 K下退火40 h,制备了只含有(La,Mg)2Ni7和(La,Mg)5Ni19超晶格结构的合金,并研究了相转变对合金电化学性能的影响.研究表明,铸态合金含有(La,Mg)Ni3、(La,Mg)2Ni7和(La,Mg)5 Ni9超晶格相以及LaNi5相,在退火过程中,位于相图相对边缘位置的LaNi5相和(La,Mg)Ni3相消失,得到了只含有(La,Mg)2 Ni7和(La,Mg)5 Ni9超晶格的双相合金.超晶格相总量的增加伴随着元素组成的均匀化和应力的降低,这不但有效提高了合金的储氢容量,而且减轻合金在充/放电循环过程中的粉化和氧化,显著提高合金电极的循环稳定性.合金电极的最大放电容量由铸态的355 mAh·g-1提高到退火态的367 mAh·g-1,100周的循环稳定性由57.97%显著提高到81.47%.但是由于合金中的缺陷和晶界的减少,合金的高倍率放电性能有所降低.  相似文献   

11.
Standards are the basis for production enterprises to organize production, ex-factory inspection, trade (delivery) and technical exchanges, product certification, quality arbitration and supervision.……  相似文献   

12.
Zusammenfassung Bei der Gestaltung von Ernteprozessen — beispielsweise des Prozesses Mähdrusch, Körnertransport und -abnahme — als transportverbundene Fließarbeitsverfahren mit mindestens zwei verschiedenen Arbeitsmitteln gibt es einen großen Optimierungsspielraum. Solche Prozesse sind mehrstufige Bedienungsprozesse mit gemischter Anordnung der Bedienungseinrichtungen. Außerdem besitzen sie stark ausgeprägte räumliche Aspekte. Es wird vor allem gezeigt, welche Merkmale solcher Prozesse in Simulationsmodellen abgebildet sein müssen, welche Zielgrößen in Abhängigkeit von welchen Einflußgrößen unter Berücksichtigung welcher Prozeßbedingungen ermittelt werden sollten und wie der Bewertungsprozeß zur Ermittlung der gewünschten Informationen gestaltet werden muß.  相似文献   

13.
正Responding to ISO’s appeal for survey for the to-be-developed ISO Strategy Plan for 2016-2020,SAC hosted a special workshop over the needs and comments of various fi elds on June 8 in Beijing.The workshop was attended by ISO President-elect and Ansteel General Manager Zhang Xiaogang,SAC Vice-Administrator Yu Xinli,and 30 experts from  相似文献   

14.
正The review group of Asia Pacific Laboratory Accreditation Cooperation(APLAC)carried out a 4-day peer review of the proficiency testing provider(PTP)for China National Accreditation Service for Conformity Assessment(CNAS)from July 28 to 31,2014.CNAS passed the PTP review with excellent performance.Two senior peer reviewers of APLAC made a comprehensive,rigorous and detailed review of CNAS’s PTP accreditation activities,and made the on-spot inspection of the review groups in Shanghai and Shenzhen respectively.  相似文献   

15.
新闻(英文)     
正China and Greece Sign the Standardization Cooperation Agreement Witnessed by Chinese Premier Li Keqiang and Greek Prime Minister Antonis Samaras,AQSIQ Minister Zhi Shuping and ELOT Chairman and Executive Director Angelos Tolkas signed the SAC-ELOT Standardization Cooperation Agreement.The Agreement is one of the critical cooperation documents signed during Li Keqiang’s visit in Greece,encouraging China and Greece to  相似文献   

16.
正The Chinese Premier Li Keqiang's recent trip to the UK has reinforced the China-UK comprehensive strategic partnership;just as the British Prime Minister David Cameron put it,"the relationship is gaining in strength,depth and understanding"after a bucket of business deals being inked worth more than 30 billion US dollars.From the first agreement signing in 2004 to the new agreement of mutual standards recognition and adoption in  相似文献   

17.
正A national directory of standards complexes for strategic emerging sectors was recently developed and released jointly by 12governmental departments,namely,SAC,NDRC,MOST,MIIT,MEP,MOA,AQSIQ,State Forest Administration,State Administration of Science and Technology for National Defense,State Oceanic Administration and National Railway Administration.  相似文献   

18.
正Four new national standards on air pollutant emission control offi cially issued by the Ministry of Environment Protection(MEP)together with AQSIQ and SAC has been brought into force from July 1,2014.The Emission standard for air pollutants of coal-burning,oil-burning and gasfi red boilers,which is the strictest emission standard historically,will tackle the stubborn pollution problem of boilers and waste incineration in most of China’s regions.  相似文献   

19.
《新型炭材料》2014,(6):460
New Carbon Materials is a bimonthly journal published with the permission of the Ministry of Science and Technology and of the State News and Publication Agency.The journal is sponsored by the Institute of Coal Chemistry,Chinese Academy of Sciences,and is published by Science Press.Aims and Scope  相似文献   

20.
正Recently,National Copyright Administration of China(NCAC)has rewarded 215 organizations and 179 individuals for their outstanding efforts on investigating standards copyright infringement and piracy in 2013.Hua Jianhua,the Deputy-Director of National Standards Copyright Protection Workgroup Office won a third prize of the national individual award.In 2012,SAC set up the national standards copyright protection working group,and developed policies to crack down standards infringement and piracy behaviors and to strengthen standards copyright protection.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号