Effect of the initial maleic anhydride content on the grafting of maleic anhydride onto isotactic polypropylene

A series of ¹³C‐enriched maleic anhydride grafted isotactic polypropylene samples were prepared in solution at 170 °C by changes in the initial maleic anhydride content. The NMR spectra of the samples showed that the signals of the maleic anhydride attached to the tertiary carbons of the isotactic polypropylene chains increased considerably with increasing maleic anhydride content, whereas the signals of the maleic anhydride on the radical chain ends (with a single bond) arising from β scission did not. On the other hand, the signals of the maleic anhydride on the radical chain ends with double bonds increased markedly with increasing maleic anhydride content, and this suggested that β scission could occur extensively after maleic anhydride was attached to the tertiary carbons. As a result, the molecular weight of the grafted polypropylene decreased significantly with increasing maleic anhydride content in this study. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5529–5534, 2005     

Preparation and properties of poly(styrene-co-maleic anhydride)/silica hybrid materials by the in situ sol–gel process

Poly(styrene-co-maleic anhydride)/silica hybrid material has been successfully prepared from styrene–maleic anhydride copolymer and tetraethoxysilane (TEOS) in the presence of a coupling agent (3-aminopropyl)triethoxysilane (APTES) by an in situ sol–gel process. It was observed that the gel time of sol–gel solution was dramatically influenced by the amount of APTES. The hybrid material exhibits optical transparency almost as good as both silica gel and the copolymer. The covalent bonds between organic and inorganic phases were introduced by the aminolysis reaction of the amino group with maleic anhydride units of copolymer to form a copolymer bearing trimethoxysilyl groups, which undergo hydrolytic polycondensation with TEOS. The differential scanning calorimetry (DSC) showed that the glass transition temperature of the hybrid materials increases with increasing of SiO₂ composition. Photographs of scanning electron microscopy (SEM) and atomic force microscopy (AFM) inferred that the size of the inorganic particles in the hybrid materials was less than 20 nm. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1607–1613, 1998     

Copolyesters of isosorbide,succinic acid,and isophthalic acid: Biodegradable,high Tg engineering plastics

Isosorbide, succinyl chloride and isophthaloyl chloride are polycondensed under various reaction conditions. The heating in bulk with or without catalysts as well in an aromatic solvent without catalyst, and polycondensation with the addition of pyridine only yield low molar mass copolyesters. However, heating in chlorobenzene with addition of SnCl₂ or ZnCl₂ produces satisfactory molar masses. The number average molecular weights (M_n) of most copolyesters fall into the range of 7000–15,000 Da with polydispersities (PD) in the range of 3–9. The MALDI‐TOF mass spectra almost exclusively displayed peaks of cyclics indicating that the chain growth was mainly limited by cyclization and not by side reactions, stoichiometric imbalance or incomplete conversion. The glass‐transition temperatures increased with the content of isophthalic acid from 75 to 180 °C and the thermo‐stabilities also followed this trend. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2464–2471     

Polycondensations of hydroxycarboxylic acids derived from optically active aminoalcohols and acid anhydrides—syntheses of functional poly(ester-amide)s

Syntheses and polycondensations of optically active hydroxycarboxylic acids prepared from acid anhydrides and aminoalcohols were carried out. Novel polymers with M̄_n 9900–27,200 were obtained by the polycondensations of hydroxycaboxylic acids derived from maleic or succinic acid using 1.2 eq. of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC · HCl) in DMF (2M) at room temperature for 8 h in satisfactory yields. Meanwhile, a hydroxycarboxylic acid obtained from phthalic acid afforded no polymer but a phthalimide derivative. The radical additions of ethanethiol or mercaptoethanol with the polymers derived from maleic anhydride proceeded smoothly in satisfactory incorporation ratios (65–98%), respectively. The polymer obtained from succinic anhydride and 2-aminoethanol showed hydrolytic degradability. © 1997 John Wiley & Sons, Inc.     

Electron-impact studies XCII–Negative ion-molecule reactions in anhydride systems. Perfluoroacetic anhydride with succinic,maleic and phthalic anhydrides. An ion cyclotron resonance study

The trifluoroacetate anion undergoes reaction with succinic, maleic and phthalic anhydrides to yield 1 : 1 adducts. The molecular anions of maleic and phthalic anhydride also undergo reaction with perfluoroacetic anhydride to produce [CF₃CO₂]^?· Maleic anhydride parent ions produce [M + CF₃CO·]^? ions when allowed to react with perfluoroacetic anhydride.     

Peroxide-initiated grafting of maleic anhydride onto linear and branched hydrocarbons

The structural features of the grafting of maleic anhydride onto low-molecular-weight compounds have been elucidated using several spectroscopic and analytical techniques. Conclusive evidence for the occurrence of singly grafted anhydride residues in multiply grafted products has been established using 2,3-¹³C₂ labeled maleic anhydride. In homogeneous solution, at the low concentrations of maleic anhydride employed, there is little evidence for oligomeric or polymeric grafts to dodecane, pristane, or squalane. The results suggest that isothermal grafting of maleic anhydride to hydrocarbon polymers should also lead to a predominance of single grafts. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3817–3825, 1999     

Polymers from renewable resources. II. A study in the radio chemical grafting of poly(styrene‐alt‐maleic anhydride) onto cellulose extracted from pine needles

A binary mixture of styrene and maleic anhydride has been graft copolymerized onto cellulose extracted from Pinus roxburghii needles. The reaction was initiated with gamma rays in air by the simultaneous irradiation method. Graft copolymerization was studied under optimum conditions of total dose of radiation, amount of water, and molar concentration previously worked out for grafting styrene onto cellulose. Percentage of total conversion (Pg), grafting efficiency (%), percentage of grafting (Pg), and rates of polymerization (R_p), grafting (R_g), and homopolymerization (R_h) have been determined as a function of maleic anhydride concentration. The high degree of kinetic regularity and the linear dependence of the rate of polymerization on maleic anhydride concentration, along with the low and nearly constant rate of homopolymerization suggest that the monomers first form a complexomer which then polymerizes to form grafted chains with an alternating sequence. Grafting parameters and reaction rates achieve maximum values when the molar ratio of styrene to maleic anhydride is 1 : 1. Further evidence for the alternating monomer sequence is obtained from quantitatively evaluating the composition of the grafted chains from the FT‐IR spectra, in which the ratio of anhydride absorbance to aromatic (CC) absorbance for the stretching bands assigned to the grafted monomers remained constant and independent of the feed ratio of maleic anhydride to styrene. Thermal behaviour of the graft copolymers revealed that all graft copolymers exhibit single stage decomposition with characteristic transitions at 161–165°C and 290–300°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1763–1769, 1999     

Synthesis of periodic copolymers via ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran using nonafluorobutanesulfonimide as an organic catalyst and subsequent transformation to aliphatic polyesters

To synthesize polyesters and periodic copolymers catalyzed by nonafluorobutanesulfonimide (Nf₂NH), we performed ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran (THF) at 50–120 °C. At high temperature (100–120 °C), the cyclic anhydrides, such as succinic anhydride (SAn), glutaric anhydride (GAn), phthalic anhydride (PAn), maleic anhydride (MAn), and citraconic anhydride (CAn), copolymerized with THF via ring‐opening to produce polyesters (M_n = 0.8–6.8 × 10³, M_n/M_w = 2.03–3.51). Ether units were temporarily formed during this copolymerization and subsequently, the ether units were transformed into esters by chain transfer reaction, thus giving the corresponding polyester. On the other hand, at low temperature (25–50 °C), ring‐opening copolymerizations of the cyclic anhydrides with THF produced poly(ester‐ether) (M_n = 3.4–12.1 × 10³, M_w/M_n = 1.44–2.10). NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra revealed that when toluene (4 M) was used as a solvent, GAn reacted with THF (unit ratio: 1:2) to produce periodic copolymers (M_n = 5.9 × 10³, M_w/M_n = 2.10). We have also performed model reactions to delineate the mechanism by which periodic copolymers containing both ester and ether units were transformed into polyesters by raising the reaction temperature to 120 °C. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of maleic anhydride grafted polyethylene and polypropylene,with controlled molecular structures

This article discusses a new chemical route to prepare maleic anhydride (MA) grafted polyethylene and polypropylene polymers with controlled molecular structure, that is, MA grafted content and polymer molecular weight and composition distributions. The chemistry involves a free radical graft reaction of maleic anhydride with poly(ethylene‐co‐p‐methylstyrene) and poly(propylene‐co‐p‐methylstyrene) copolymers. Under a suspension reaction condition, the grafting reaction takes place selectively on the p‐methylstyrene units in the copolymer, due to high reactivity of p‐methyl group and favorable mixing between p‐methylstyrene units and chemical reagents in the swollen amorphous phases. The resulting polymer shows no detectable molecular weight change during the reaction, and the MA grafted content increases with the increase of initiator and p‐methylstyrene concentrations. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1337–1343, 2000     

Penultimate effects in the copolymerization of maleic anhydride with electron‐rich styrene derivatives

The (controlled) free‐radical copolymerization of maleic anhydride and styrene or derivatives thereof is often thought to provide nearly perfect alternating copolymers. Here, the RAFT copolymerization of electron‐rich styrene derivatives with maleic anhydride is reported. This copolymerization shows distinct penultimate effects, resulting in polymers with increased incorporation of styrene monomers, that is, where a tendency toward periodic (S‐S‐MA) copolymers exists. This work could be a first step towards periodic copolymers based on maleic anhydride and styrene derivatives. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2932–2939     

Bioengineering functional copolymers. III. Synthesis of biocompatible poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrocomplexes and their thermostabilization effect on the activity of the enzyme penicillin G acylase

Stimuli‐responsive poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrobranched macrocomplexes were synthesized by (1) the radical copolymerization of N‐isopropylacrylamide and maleic anhydride with α,α′‐azobisisobutyronitrile as an initiator in 1,4‐dioxane at 65 °C under a nitrogen atmosphere, (2) the polyesterification (grafting) of prepared poly(N‐isopropylacrylamide‐co‐maleic anhydride) containing less than 20 mol % anhydride units with α‐hydroxy‐ω‐methoxy‐poly(ethylene oxide)s having different number‐average molecular weights (M_n = 4000, 10,000, or 20,000), and (3) the incorporation of macrobranched copolymers with poly(ethylene imine) (M_n = 60,000). The composition and structure of the synthesized copolymer systems were determined by Fourier transform infrared, ¹H and ¹³C NMR spectroscopy, and chemical and elemental analyses. The important properties of the copolymer systems (e.g., the viscosity, thermal and pH sensitivities, and lower critical solution temperature behavior) changed with increases in the molecular weight, composition, and length of the macrobranched hydrophobic domains. These copolymers with reactive anhydride and carboxylic groups were used for the stabilization of penicillin G acylase (PGA). The conjugation of the enzyme with the copolymers significantly increased the thermal stability of PGA (three times at 45 °C and two times at 65 °C). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1580–1593, 2003     

Cyclic poly(lactide)s via the ROPPOC method catalyzed by alkyl‐ or aryltin chlorides

A comparison of tributyltin chloride, dibutyltin dichloride, and butyltin trichloride as catalysts of ring‐opening polymerizations (ROPs) of l‐lactides at 160 °C in bulk reveals increasing reactivity in the above order, but only the least reactive catalysts, Bu₃SnCl, yield a uniform reaction product, namely cyclic poly(L‐lactide)s with weight average molecular weights (M_w's) in the range of 40,000–80,000. A comparison of dimethyltin , dibutyltin , and diphenyltin dichlorides resulted in the following order of reactivity: Me₂SnCl₂ < Bu₂SnCl₂ < <Ph₂SnCl₂. In this series also, the most reactive catalyst yields cyclic polylactides, but the extent of cyclization varies with the molecular weight. The formation of cyclic polylactides is explained by ROP combined with simultaneous polycondensation involving end‐to‐end cyclization (ROPPOC method). ROP of meso‐lactide at 80 or 60 °C yields even‐numbered linear chains as main products, a result supporting the ROPPOC mechanism. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 952–960     

Synthesis of a poly(vinyl ether) containing a benzocyclobutene moiety and its reaction with dienophiles

1‐Benzocyclobutenyl vinyl ether (1) was easily prepared by the elimination reaction of hydrogen bromide from 1‐benzocyclobutenyl 1‐bromoethyl ether obtained by 1‐bromobenzocyclobutene and ethylene glycol via two steps in a good yield. Cationic polymerizations of 1 was carried out at −78°C for 2 h in toluene in the presence of BF₃OEt₂ as an initiator to give quantitatively the corresponding polymers (2) as white solids. As a model reaction of the polymer reaction of 2 with dienophiles, the Diels–Alder reactions of 1‐methoxybenzocyclobutene with maleic anhydride (MA) in toluene at 100–140°C for 3 h were carried out to obtain the corresponding Diels–Alder adduct quantitatively at 140°C. The polymer reactions of 2 with MA and N‐phenylmaleimide (MI) in toluene were carried out to yield the corresponding Diels–Alder adduct polymers in good yields. The degree of introduction of the dienophile could be controlled by temperature, and the unreacted benzocyclobutene moiety could further react with another benzocyclobutene moiety or dienophile. The properties (solubilities, T_g, and temperature of 10% weight loss) of the polymers obtained from the polymer reaction were quite different from those of 2. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 59–67, 1999     

Melt polycondensation of L‐lactic acid with Sn(II) catalysts activated by various proton acids: A direct manufacturing route to high molecular weight Poly(L‐lactic acid)

Poly(L ‐lactic acid) (PLLA) was produced by the melt polycondensation of L ‐lactic acid. For the optimization of the reaction conditions, various catalyst systems were examined at different temperature and reaction times. It was discovered that Sn(II) catalysts activated by various proton acids can produce high molecular weight PLLA [weight‐average molecular weight (M_w ) ≥ 100,000] in a relatively short reaction time (≤15 h) compared with simple Sn(II)‐based catalysts (SnO, SnCl₂ · 2H₂O), which produce PLLA with an M_w of less than 30,000 after 20 h. The new catalyst system is also superior to the conventional systems in regard to racemization and discoloration of the resultant polymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1673–1679, 2000     

MALDI‐TOF‐MS analysis of living cationic polymerization of vinyl ethers. III. Polymerization with SnCl4 and TiCl4 in the absence of additives

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analysis revealed that the precision control (or the living nature) of the cationic polymerization of vinyl ethers with SnCl₄ or TiCl₄ critically depends on the Lewis acid concentration and temperature. Specifically, at an extremely low Lewis acid concentration, for example, the polymerization with the HCl–vinyl ether adduct (an initiator) is living at ?78 °C in CH₂Cl₂ solvent, whereas side reactions occurred at a higher concentration of SnCl₄ or at a higher temperature, ?15 °C. This was more pronounced with SnCl₄ than with TiCl₄, which was due to a stronger Lewis acidity of SnCl₄ as suggested by NMR analysis of the model reactions. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1258–1267, 2001     

Solution polymerization of trioxane catalyzed by stannic chloride

The polymerization of trioxane catalyzed by stannic chloride (SnCl₄) in ethylene dichloride was studied and compared with the results obtained with boron trifluoride etherate, BF₃·O(C₂H₅)₂, as catalyst. Under the same conditions, the polymerization rate was larger with SnCl₄ than with BF₃·O(C₂H₅)₂, while at a fixed polymer yield the molecular weight of the polymer obtained by SnCl₄ was lower than with the BF₃·O(C₂H₅)₂ catalyzed reaction. The overall activation energy of trioxane polymerization with SnCl₄ was 11.0 ± 0.8 kcal/mole. The kinetic orders of catalyst and monomer were determined to be close to 2 and 4, respectively. A certain amount of tetraoxane was also produced in an early stage of the polymerization with SnCl₄ similar to BF₃·O(C₂H₅)₂-catalyzed reaction. However, the maximum amount of tetraoxane produced at 30°C was larger with SnCl₄ than with BF₃·O(C₂H₅)₂. In addition, a ten-membered ring compound (pentoxane) was isolated in the solution polymerization of trioxane catalyzed by both SnCl₄ and BF₃·O(C₂H₅)₂. The confirmation of pentoxane formation is strong evidence for the back-biting reaction mechanism.     

Determination of propagation‐rate constant of vinylidene chloride by emulsion polymerization

The propagation‐rate constant of vinylidene chloride (VDC) was determined at 40 and 50 °C, respectively, by applying the so‐called Ugelstad plot to the polymerization‐rate data of the seeded and unseeded emulsion polymerizations of VDC. The values of the propagation‐rate constant k_p thus determined are k_p = 64 dm³/mol · s at 50 °C and k_p = 52 dm³/mol · s at 40 °C, respectively. From these k_p values, the activation energy for propagation reaction was determined to be E_p = 4.2 kcal/mol, which is close to that of vinyl chloride (3.7 kcal/mol). © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1005–1015, 2001     

BF3·OEt2-initiated polymerization of 2-methylene-1,3-dioxepanes

BF₃·OEt₂-initiated polymerizations of 2-methylene-1,3-dioxepane gave polymers composed of both ring-retained and ring-opened structures. The ring-opening content increased with an increase in polymerization temperature. Poly(4,7-dimethyl-2-methylene-1,3-dioxepane) propagated slower during BF₃·OEt₂-initiated polymerization and had a lower ring-opened content than poly(2-methylene-1,3-dioxepane). The type of acid initiator used also affected the amount of ring opening observed. Stronger acids gave less ring opening. Attempted BF₃·OEt₂-initiated copolymerizations of these seven-membered ring cyclic ketene acetals with isobutyl vinyl ether at room temperature resulted in formation of the two homopolymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 873–881, 1998     

Etude des systèmes binaires formées par le chlorure de cyanogène et par les tétrachlorures de carbone,de silicium,de germanium et d'étain

Study of binary systems formed by cyanogen chloride and the tetrachlorides of carbon, silicon, germanium and tin. The diagrams of binary mixtures of cyanogene chloride with the tetrachlorides of carbon, silicon, germanium and tin were studied. Only SnCl₄ gives an addition compound: SnCl₄ · 2ClCN. The existence of the complex was confirmed by X-ray diffraction and vapour pressure measurements. This complex gives SnCl₄ · 2NOCl on treatment with nitrosyl chloride.     

Cationic polymerization behavior of seven-membered cyclic sulfite

Cationic ring-opening polymerization behavior of a seven-membered cyclic sulfite ( 1 ) was examined. 1 was prepared by the reaction of 1,4-butanediol with SOCl₂ in 58% yield. The cationic polymerization of 1 was carried out at 0, 25, 60, or 100°C with trifluoromethanesulfonic acid (TfOH), methyl trifluoromethanesulfonate (TfOMe), BF₃ · OEt₂, SnCl₄, methyl p-toluenesulfonate (TsOMe), or MeI as an initiator in bulk under a nitrogen atmosphere to afford the polymer with M̄_n 1000–10,400. The order of activities of the initiators for 1 was as follows, TfOH ≅ TfOMe > SnCl₄ > BF₃ · OEt₂ > TsOMe ≅ MeI. The polymerization of 1 with TfOMe afforded a poly(sulfite) below 25°C, but afforded a polymer containing an ether unit at 60°C, which was formed by a desulfoxylation. The higher the activity of the initiator was, the more easily the desulfoxylation occurred. We expected volume expansion on polymerization because cyclic sulfites have large dipole moment values, but it turned out that 1 showed 4.34% shrinkage on polymerization. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3673–3682, 1997