Structural isomers of 2-(2,3 and 4-substituted-phenyl)-1,2-benzisoselenazol-3(2H)-one: A Theoretical Study

A series of 2-(2,3 and 4-substituted-phenyl)-1,2-benzisoselenazol-3(2H)-one molecules were theoretically investigated by the use of density functional theory (DFT) calculations at the B3LYP/6-311++G^∗∗ level of the theory. The substituents studied in this work are X = H; CH₃; NH₂; OH; OCH₃; F, Cl; Br; NO₂; CN; COCH₃; CO₂H; CO₂Me; SH; BH₂. We have selected these functional groups to be placed in the 2, 3 and 4 positions with relation to the benzisoselenazol moiety in order to show the effect of these structural modifications on the electronic properties of the molecules.     

Synthesis and characterization of thiosemicarbazone derivatives of 2-ethoxy-3-methoxy-benzaldehyde and their rhenium(I) complexes

The ligands (HL¹, HL² and HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods, and the structures of the ligands have been elucidated by X-ray diffraction. In the case of HL¹, we have tried the reaction with [ReX(CO)₅] (X = Br, Cl) in toluene and we proved the formation of the adduct also by this way by the isolation of single crystals of 1a′ · ½C₇H_8.     

Switching of global minima of novel germylenic reactive intermediates via halogens (X): C2GeH2 vs. C2GeHX at ab initio and DFT levels

For 30 C₂GeHX germylenic isomers, one cyclic structure, X-germacyclopropenylidene, and three acyclics are considered, which include: ethynyl-X-germylene, X-vinylidenegermylene, and (X-ethynyl)germylene (X = H, F, Cl, and Br). The global minimum among six isomeric C₂GeH₂ (where X = H), is found to be cyclic, aromatic, singlet germacyclopropenylidene. In contrast, among the 24 corresponding halogermylenes, C₂GeHX (where X = F, Cl, and Br), the global minima switch to acyclic, singlet ethynylhalogermylenes, at eight reasonably high ab initio and DFT levels. The direct resonance interaction between X and the divalent center Ge in the singlet acyclic ethynylhalogermylene structures, is claimed to justify switching of the calculated global minima in the halo derivatives. GIAO-NICS calculations indicate that the X-germacyclopropenylidene isomer is more aromatic for X = H than X = F, Cl, or Br. The angle ∠XGeC bending potential energy curves show the singlet and triplet ethynylgermylene crossing at ≈146°, for X = H.     

Secondary bonding in functionalized organotellurium compounds: preparation and structural characterization of bis(acetamido)tellurium(IV) diiodide and bis(4-methylbenzoylmethyl)tellurium(II)

Elemental tellurium inserts, under mild conditions, between C-I bond of iodoacetamide to afford bis(acetamido)tellurium(IV) diiodide (NH₂COCH₂)₂TeI₂, 1. Heating of N-bromomethylphthalimide with activated tellurium powder however, resulted in the formation of bis(phthalimido)methane, 2, instead of the expected product bis(phthalimidomethyl)tellurium(IV) dibromide. The IR spectrum of 1 is indicative of intramolecular Te?OC interaction which is also substantiated by its single-crystal structure. The compound with planar small-bite chelating organic ligands acquires butterfly shape that imparts almost perfect C_2v molecular symmetry but unlike other organotellurium(IV) iodides, the solid state structure of 1 is devoid of any intermolecular Te?I or I?I secondary interactions owing to the presence of intramolecular Te?O secondary bonds as well as intermolecular N-H?O, N-H?I and C-H?I hydrogen bonds. Bis(4-methylbenzoylmethyl)telluride (4-MeC₆H₄COCH₂)₂Te, 3b, prepared by the reduction of the corresponding dibromide, is the first structurally characterized acyclic dialkyltelluride and interestingly, does not involve intramolecular Te?OC interaction invariably present in the parent dihalides (4-YC₆H₄COCH₂)₂TeX₂ (Y = H, X = I 4a; Y = H, X = Br 5a; Y = MeO, X = Br 5c). Weak intermolecular Te?Te and C-H?O hydrogen bonds appear to be the non covalent intermolecular associative forces that dominate its crystal packing in the solid state of this Te(II) derivative. The dialkyltellurides (4-YC₆H₄COCH₂)₂Te, (Y = H, 3a, Me, 3b) undergo oxidation in presence of (SCN)₂ to give the corresponding bis(isothiocyanato)tellurium(IV) derivatives and form 2:1 adducts with Pt(II) and Pd(II) chlorides.     

A new approach to the synthesis of oligomers. Application to the synthesis of p-phenylene thioether wires

Oligothioethers 4-RC₆H₄(SC₆H₄-4)_nX (n = 1-3; X = Br, I; R = NO₂; X = Br; R = MeO. n = 1 and 2; X = I; R = MeO. n = 4; X = Br; R = NO₂) have been prepared through a process involving (i) palladium-catalyzed C-S coupling between 4-RC₆H₄(SC₆H₄-4)_n−1I and 4-BrC₆H₄SH to give 4-RC₆H₄(SC₆H₄-4)_nBr and (ii) copper-catalyzed replacement of Br by I.     

Regio- and stereo-specific addition of organotellurium trihalides to ferrocenylacetylene: Molecular and crystal structure of (Z)-halovinyl organotellurium dihalides

Organotellurium(IV) trihalides RTeX₃ (X = Br, I) reacts readily with ferrocenylacetylene to give (Z)-products of electrophilic addition to C-C triple bond: (Z)-FcXC = CTeX₂R (R = Ph, X = Br (1) or I (2); R = trans-8-ethoxy-4-cyclooctenyl, X = Br (3)). In case of PhTeX₃ (X = Br or I) the room temperature reaction is spontaneous and the structure of the product does not depends on the polarity of the solvent used; this is in contrast to the reaction of aryl-acetylenes with RTeBr₃ which were reported to afford (E)-bromovinyl aryltellurium dibromides in methanol and its (Z)-isomer in benzene. Molecular and crystal structures of new compounds and effect of bulky and electron-rich ferrocenyl substituent on the reactivity of acetylene moiety are discussed in this paper.     

Rhenium(I) tricarbonyl complexes with bispyridine ligands attached to sulfur-rich core: Syntheses, structures and properties

Rhenium(I) tricarbonyl complexes with bispyridine ligands bearing sulfur-rich pendant, Re(CO)₃(Medpydt)X (Medpydt = dimethyl 2-(di(2-pyridyl)methylene)-1,3-dithiole-4,5-dicarboxylate; X = Cl, 1; X = Br, 2) and Re(CO)₃(MebpyTTF)X (MebpyTTF = 4,5-bis(methyloxycabonyl)-4′,5′-(4′-methyl-2,2′-dipyrid-4-ylethylenedithio)-tetrathiafulvalene; X = Cl, 5; X = Br, 6), were prepared from the reactions between Re(CO)₅X (X = Cl, Br) and Medpydt or MebpyTTF, respectively. Hydrolysis of the above complexes afforded the analogues with carboxylate derivatives, Re(CO)₃(H₂dpydt)X (X = Cl, 3; X = Br, 4) and Re(CO)₃(H₂bpyTTF)X (X = Cl, 7; X = Br, 8). The crystal structures for complexes 1 · 2H₂O, 5 and 6 were determined using X-ray single crystal diffraction. UV-Vis absorption spectra of the rhenium complexes show the intraligand and MLCT transitions. Electrochemical behaviors of all new compounds were studied with cyclic voltammetry. Upon irradiation, complexes 3-6 exhibit blue to red emissions in fluid solutions at the room temperature. The performance of complexes 3, 4, 7 and 8 as photosensitizers for anatase TiO₂ solar cells was preliminarily investigated as well.     

Synthesis,crystal structure and biological activities of dehydroacetic acid complexes of Ru(II) and Ru(III) containing PPh3/AsPh3

A series of Ru(II) and Ru(III) complexes of the types [RuX(CO)(EPh₃)₂L] (X = H, E = P; X = Cl, E = P or As) and [RuX₂(EPh₃)₂L] (X = Cl, E = P or As; X = Br, E = As, L = monoanion of dehydroacetic acid) have been synthesized in order to explore their biological activities, such as DNA-binding and antibacterial activity. The complexes were characterized by analytical and spectroscopic techniques. The crystal and molecular structure of [RuCl₂(AsPh₃)₂(L)] has been determined by single crystal XRD. The cyclic voltammograms of the complexes in acetonitrile displayed either quasi-reversible or irreversible redox couples based on the metal centre. The ligand, dehydroacetic acid (DHA) and its metal complexes were tested against five pathogenic bacteria. Absorption titration and cyclic voltammetric studies revealed that the complexes interact with Herring Sperm ds DNA through different binding modes to different extents.     

Insertion of tin(II) bromide into Pt–X (X = Cl,Br) bond of dimethylplatinum(IV) complexes: A novel polymorphic form of [PtBr2(bpy)]

The platinum(II) complex [PtMe₂(bpy)] (bpy = 2,2′-bipyridine) reacted with a large excess of dihaloalkanes X(CH₂)_nX (n = 1, X = Cl; n = 4, X = Br) to form the platinum(IV) complexes [PtMe₂X{(CH₂)_nX}(bpy)] (n = 1, X = Cl, 1a; n = 4, X = Br, 1b). The reaction of complexes 1a and 1b with SnBr₂ resulted in insertion of SnBr₂ into Pt–X (X = Cl, Br) bond to afford the trihalostannyl complexes [PtMe₂(SnBr₂X){(CH₂)_nX}(bpy)] (n = 1, X = Cl, 2a; n = 4, X = Br, 2b). The synthesis of such trihalostannylplatinum(IV) complexes is reported for the first time. The complex 2a was decomposed in CH₂Cl₂ solution and single crystals of [PtBr₂(bpy)] (3a) were obtained. The X-ray structure determination of 3a revealed a new polymorphic form of [PtBr₂(bpy)]. The molecules undergo a remarkable stacking along the b-axis to form a zigzag Pt?Pt?Pt chain containing both short (3.799 Å) and long (5.175 Å) Pt?Pt separations through the crystal. The crystal structure is compared to that of the yellow modification of [PtBr₂(bpy)].     

Carboxy-functionalized dithiolate di-iron complexes related to the active site of Fe-only hydrogenase

Reactions of the di-iron complex [Fe₂(μ-S)₂(CO)₆]²⁻ with carboxy-functionalized dihalide derivatives (XCH₂)₂R (X = Cl, R = NC₆H₄CH₂CO₂CH₃; X = Br, R = C₆H₃COOH, C₆H₃COON(COCH₂)₂) gave new functionalized dithiolate di-iron complexes [Fe₂(μ-SRS)(CO)₆] (R = (CH₂)₂NC₆H₄CH₂CO₂CH₃ (1), (CH₂)₂C₆H₃COOH (2), (CH₂)₂C₆H₃COON(COCH₂)₂ (3)) in low yields. The azadithiolate complex 1 has been characterized by a single crystal X-ray diffraction analysis and studied by electrochemical methods.     

Structural studies of two-coordinate complexes of tris(2-methoxylphenyl)phosphine and tris(4-methoxyphenyl)phosphine with gold(I) halides

A series of five gold(I) halide complexes with the two isomeric methoxy-substituted triarylphosphines, tris(2-methoxyphenyl)phosphine [P(oanis)₃], [AuP(oanis)₃X] [for X = Cl, (1); X = Br, (2) and X = I, (3)] and tris(4-methoxyphenyl)phosphine [P(panis)₃], [AuP(panis)₃X] [for X = Br (4) and X = I (5)] have been synthesized and characterized by single crystal X-ray diffraction and solution ³¹P{¹H} NMR spectroscopy. The structure determinations confirm the expected presence of linear two-coordination about the gold centres in all five complexes with bond distance and angle data typical of this type of compound [Au–P, 2.239(2)–2.259(3) Å; Au–Cl, 2.294(2) Å; Au–Br, 2.385(2)–2.402(2) Å; Au–I, 2.546(1)–2.554(1) Å; P–Au–X; 175.3(1)–180°]. All analogues except the iodo complex 5 crystallize with one complex molecule in the crystallographic asymmetric unit. The bromo and iodo complexes 2 and 3 constitute a trigonal isomorphous set while the bromo complex 4 is also isomorphous with the previously determined chloro complex [AuP(panis)₃Cl]. The 2-methoxy analogues are stabilized by significant methoxy-O?Au interactions.     

Paramagnetic ruthenium(III) complexes bearing O,O chelating ligands: Synthesis, spectra, molecular structure and electron transfer properties

Paramagnetic Ru(III) complexes of the type [RuX₂(EPh₃)₂(L)] (where X = Cl or Br; E = P or As; L = monobasic bidentate benzophenone ligand) have been synthesized from the reaction of ruthenium(III) precursors, viz. [RuX₃(EPh₃)₃] (where X = Cl, E = P; X = Cl or Br, E = As) or [RuBr₃(PPh₃)₂(CH₃OH)] and substituted hydroxy benzophenones in a 1:1 molar ratio in benzene under reflux for 6 h. The hydroxy benzophenone ligands behave as monoanionic bidentate O,O donors and coordinate to ruthenium through the phenolate oxygen and ketonic oxygen atoms, generating a six-membered chelate ring. The compositions of the complexes have been established by analytical and spectral (FT-IR, UV-Vis, EPR) and X-ray crystallography methods. The single crystal structure of the complex [RuCl₂(PPh₃)₂(L₁)] (1) has been determined by X-ray crystallography and indicates the presence of a distorted octahedral geometry in these complexes. The magnetic moment values of the complexes are in the range 1.75-1.89 μ_B, which reveals the presence of one unpaired electron in the metal ion. EPR spectra of liquid samples at liquid nitrogen temperature (LNT) show a rhombic distortion (g_x ≠ g_y ≠ g_z) around the ruthenium ion. The complexes are redox active and display quasi-reversible oxidation and quasi-reversible reduction waves versus Ag/AgCl.     

Synthesis, characterization, reactivity and computational studies of new rhenium(I) complexes with thiosemicarbazone ligands derived from 4-(methylthio)benzaldehyde

N-thioamide thiosemicarbazone derived from 4-(methylthio)benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in methanol gave the adducts [ReX(CO)₃(HLⁿ)] (1a X = Cl, n = 1; 1a′ X = Br, n = 1; 1b X = Cl, n = 2; 1b′ X = Br, n = 2; 1c X = Cl, n = 3; 1c′ X = Br, n = 3) in good yield.All the compounds have been characterized by elemental analysis, mass spectrometry (ESI), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³, HL³·(CH₃)₂SO and 1b′·H₂O were also elucidated by X-ray diffraction. In 1b′, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms (κS,N³) forming a five-membered chelate ring, as well as three carbonyl and bromide ligands. The resulting coordination polyhedron can be described as a distorted octahedron.The structure of the dimers is based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆] (2a), [Re₂(L²)₂(CO)₆] (2b) and [Re₂(L³)₂(CO)₆] (2c) as determined by X-ray studies. Methods of synthesis were optimized to obtain amounts of these thiosemicarbazonate complexes. In these compounds the dimer structures are achieved by Re-S-Re bridges, where S is the thiolate sulphur from a κS,N³-bidentate thiosemicarbazonate ligand.Some single crystals isolated in the synthesis of 2b contain [Re(L⁴)(L²)(CO)₃] (3b) where L⁴ (=2-methylamine-5-(para-methylsulfanephenyl)-1,3,4-thiadiazole) is originated in a cyclization process of the thiosemicarbazone. Furthermore, the rhenium atom is coordinate by the sulphur and the thioamidic nitrogen of the thiosemicarbazonate (κS,N²) affording a four-membered chelate ring.     

Synthesis and characterization of some new mononuclear ruthenium complexes containing 4-(un)substituted dipyridylpyrazole ligands

A mononuclear ruthenium complex [Ru(bpy)₂(bpp)](PF₆) (1) and its halogenated and nitro derivatives [Ru(bpy)₂(Xbpp)](PF₆) (bpy = 2,2′-bipyridine; bpp = 3,5-bis(2-pyridyl)pyrazole; X = Cl, 2; X = Br, 3; X = I, 4; X = NO₂, 5) have been synthesized and characterized by ¹H NMR, ¹³C NMR, HRMS, elemental analysis. Complexes 2–5 have been further confirmed by X-ray diffraction. Their UV–Vis and emission spectroscopies, electrochemical measurements and acid–base properties are described. The results presented here reveal that the introduction of Cl, Br, I and NO₂ groups to the coordinated bpp⁻ ligand makes the absorption and emission maxima of the parent complex 1 blue-shifted, the oxidation potential of the Ru^II/Ru^III couple increased and the pK_a value decreased obviously. In addition, significant quenching of the emission by these groups is also observed.     

Effect of ring substituents on crystal packing and H-bonding in a series of halobis(phen)copper(II) arylphosphonic acid complexes

The synthesis and crystal structures of five new analogues of the supramolecular copper(II) organophosphonate [Cu^II(phen)₂Cl][(C₆H₅PO(OH)₂)((OH)O₂PC₆H₅)] (1) are presented. The structures contain substituted phenylphosphonic acids, and are of the general formula [Cu^II(phen)₂Cl][(XPO(OH)₂)((OH)O₂PX)] · Z, where X = o-CH₃(C₆H₅) (2); X = p-CH₃(C₆H₅), Z = H₂O · 2CH₃CH₂OH (4); X = o-NO₂(C₆H₅), m-NO₂(C₆H₅) (5); X = m-NO₂(C₆H₅) (6); X = C₁₀H₇ (7).     

Structure and reactivity of derivatives of dihalogenomethyl indium(III) halides, X2InCHX2 (X = Cl, Br, I)

The reactions of indium monohalides, InX with haloforms, CHX₃, in 1,4-dioxane (diox), produce the dioxane adducts of dihalogeno-dihalogenomethyl-indium(III), X₂In(diox)_nCHX₂ (X = Cl, Br, n = 1; X = I, n = 2) compounds. The ionic derivative [(C₂H₅)₄N] [Cl₃InCHCl₂] was prepared and its crystal structure determined by X-ray means. The reactions of the X₂In(diox)_nCHX₂ compounds are significantly different from those of the related X₂InCH₂X compounds. The dihalogenomethyl derivatives react with strong electrophiles suggesting dihalogenomethyl substituents of mild nucleophilic character, while the carbon atoms in the halogenomethyl derivatives are electrophilic.     

Incorporation of a tripodal ligand with a (N,O,O)-donor set into a new family of nickel and cobalt spin clusters

The reaction of Ni(OAc)₂, NiX₂ (X = Cl, Br) or CoCl₂ with the proligand 2-amino-2-methyl-1,3-propanediol (ampdH₂) affords a new family of tetranuclear complexes. The syntheses of [Ni₄(OAc)₄(ampdH)₄] (1) and [M₄X₄(ampdH)₄] (M = Ni, X = Cl, 2; M = Ni, X = Br, 3; M = Co, X = Cl, 4) are reported, together with the single crystal X-ray structures of 1, 2 and 4 and the magnetochemical characterization of 1, 3 and 4. Each member of this family of complexes displays a low symmetry structure that incorporates a {M₄O₄} core unit based on a distorted cubane. Magnetic measurements reveal ferromagnetic exchange interactions for 1, 3 and 4. These give rise to S = 4 ground state spins for the tetranuclear Ni complexes and an anisotropic effective S′ = 2 ground state for the Co complex.     

Synthesis,characterization, electrochemical behaviour and X-ray crystal structures of nickel(II) complexes with a N2O4 donor set macrocyclic Schiff base ligand

Two nickel(II) complexes of [1 + 1] macrocyclic Schiff base ligand (L) have been prepared by cyclocondensation reactions between 1,3-diamino-2-propanol and 2-[3-(2-formylphenoxy)-2-hydroxypropoxy] benzaldehyde, using NiX₂ (X = Br, and I) salts as template agents, and characterized by elemental analyses, IR, molar conductivity and electronic spectra in both solid and solution states. The single-crystal X-ray diffractions of the complexes are also reported that contain nickel(II) ion in a distorted octahedral geometry coordination of N₂O₃X (X = Br, I and NO₃). In all complexes the ligand behaves as a pentadentate ligand. Cyclic voltammetric studies of nickel(II) complexes indicate a quasi-reversible redox wave in the negative potential range.     

Formation and crystal structures of [(alkoxy)bis(pyridin-2-yl)methanolato-N,O,N]tin(IV) complexes

Reactions of bis(pyridin-2-yl)ketone with tin tetrahalides, SnX₄ (X = Cl or Br), or organotin trichlorides, R^′SnCl₃ (R^′ = Ph, Bu or CH₂CH₂CO₂Me), in ROH (R = Me or Et) readily produces RObis(pyridin-2-yl)methanolato)tin complexes, [5: RO(py)₂C(OSnX₃)] (5: R,X = Me,Cl; Et,Cl; Et,Br) or [6: MeO(py)₂C(OSnCl₂R^′)] (R^′ = Ph, Bu, CH₂CH₂CO₂Me). In addition, halide exchange reaction between SnI₄ and (5: R,X = Me,Cl) occurred to give (5: R,X = Me,I). The crystal structures of six tin(IV) derivatives indicated, in all cases, a monoanionic tridentate ligand, [RO(py)₂C(O⁻)-N,O,N], arranged in a fac manner about a distorted octahedral tin atom. The Sn–O and Sn–N bonds lengths do not show much variation amongst the six complexes despite the differences in the other ligands at tin.