A micromechanics method to study the effect of domain switching on fracture behavior of polycrystalline ferroelectric ceramics

ＩｎｔｒｏｄｕｃｔｉｏｎＲｅｃｅｎｔｌｙ ,ｔｈｅｆｅｒｒｏｅｌｅｃｔｒｉｃｃｅｒａｍｉｃｓｈａｓｓｕｃｈｅｘｃｅｌｌｅｎｔｃｈａｒａｃｔｅｒｉｓｔｉｃｓｏｆｐｉｅｚｏｅｌｅｃｔｒｉｃｉｔｙａｎｄｐｙｒｏｅｌｅｃｔｒｉｃｉｔｙｅｔｃ .ｔｈａｔｉｔｂｅｃｏｍｅｓｏｎｅｏｆｔｈｅｍｏｓｔｉｍｐｏｒｔａｎｔｆｕｎｃｔｉｏｎａｌｍａｔｅｒｉａｌｓ.Ｆｏｒｉｎｓｔａｎｃｅ ,ｔｈｅｗｉｄｅｌｙａｐｐｌｉｅｄｓｅｎｓｏｒｓ,ｔｒａｎｓｄｕｃｅｒｓａｎｄａｃｔｕａｔｏｒｓｅｔｃ .ａｒｅｍａｄｅｏｆｔｈｅｆｅｒｒｏｅ…     

含随机分布缺陷的多晶铁电材料的有效电弹性能

针对铁电材料含有随机分布缺陷以及微结构在外场作用下发生变化的特点,建立起一个细观统计力学模型,考虑到缺陷和酶极化转动之间的相互影响,利用细观力学方法－Eshelby等效夹杂法和Mori-Tanaka的平均理论,具体分析了所含缺陷以及外场对铁电材料有效电弹性能和模量的影响。针对BaTiO3铁电陶瓷的有效电弹性能与常数的预报结果表明了缺陷的存在将增强材料的压电性能。     

Two-scale micromechanics-based probabilistic modeling of domain switching in ferroelectric ceramics

A two-scale micromechanics model is developed in this paper to analyze domain switching in ferroelectric ceramics, using a probabilistic domain switching criterion based on energetic analysis. The microstructure of ferroelectric ceramics at two distinct length scales, domains and grains, has been carefully analyzed. The interaction at domain level is accounted for by energy minimization theory, while the fluctuation at grain level is analyzed using ellipsoidal two-point correlation function. The model has been implemented by Monte Carlo method, and applied to simulate the electric poling and mechanical depoling of Pb(Zr_xTi_1-x)O₃ (PZT) ceramics across morphotropic phase boundary (MPB). The drastically different switching characteristics of PZT ceramics across MPB has been captured, and good agreement with experiments has been observed. The effects of the transformation strains and spontaneous polarizations are highlighted, confirming the proposition of Li et al. [2005. Domain switching in polycrystalline ferroelectric ceramics. Nature Materials 4, 776–781] that the strain compatibility plays a dominant role in domain switching in ferroelectric ceramics.     

Influence of domain switching zones on the fracture toughness of ferroelectrics

The paper presents a fracture model for ferroelectric materials taking into account the hysteretic domain switching processes near to the tip of a macroscopic crack. The model is based on the balance of energy supplied by the driving forces, on the one hand, and the total of energies either dissipated by domain switching, stored in the crack wake region or consumed by the formation of new fracture surface, on the other hand. An internal variable theory describes the nonlinear coupled electromechanical material response within the framework of a three-dimensional continuum model. For simplicity, the complex orientation distribution function of domains in a polycrystalline ceramic is approximated by only six representative space orientations. The theory predicts certain dimensionless material parameter combinations which govern the change of fracture toughness under the application of different mechanical and electrical loadings. A comparison with data available in the literature for barium titanate ceramics yields a reasonable coincidence.     

铁电陶瓷微观电畴的成核率模型

大量的实验已经证实电畴翻转是铁电材料非线性和迟滞性本构曲线的根本原因。研究者已经对铁电陶瓷的微观电畴翻转行为进行了大量详细的研究。针对描述电畴成核的物理实验结果和经典的成核率实验数据,为了建立电畴翻转体积分数的演化方程提出了反应微观电畴翻转的成核率模型。针对铁电试样电畴随机分布的情况,应用该模型对铁电陶瓷的非线性本构行为进行了研究。理论结果与实验数据的比较表明,模型能较好的描述铁电材料的非线性本构行为。同时模型所揭示的微观反转的物理本质可进一步的指导宏观唯象模型的改进。     

A hybrid phenomenological model for ferroelectroelastic ceramics. Part I: Single phased materials

In this part I of a two part series, a rate-independent hybrid phenomenological constitutive model applicable for single phased polycrystalline ferroelectroelastic ceramics is presented. The term “hybrid” refers to the fact that features from macroscopic phenomenological models and micro-electromechanical phenomenological models are combined. In particular, functional forms for a switching function and the Helmholtz free energy are assumed as in many macroscopic phenomenological models; and the volume fractions of domain variants are used to describe the internal material state, which is a key feature of micro-electromechanical phenomenological models. The approach described in this paper is an attempt to combine the advantages of macroscopic and micro-electromechanical material models. Its potential is demonstrated by comparison with experimental data for barium titanate. Finally, it is shown that the model for single phased materials cannot reproduce the material behavior of morphotropic PZT ceramics based on a realistic choice for the material parameters. This serves as a motivation for part II of the series, which deals with the modeling of morphotropic PZT ceramics taking into account the micro-structural specifics of these materials.     

Computational modeling of rate-dependent domain switching in piezoelectric materials

In this contribution a micromechanically motivated model for rate-dependent switching effects in piezoelectric materials is developed. The proposed framework is embedded into a three-dimensional finite element setting whereby each element is assumed to represent an individual grain. Related dipole (polarization) directions are thereby initially randomly oriented at the element level to realistically capture the originally un-poled state of grains in the bulk ceramics. The onset of domain switching processes is based on a representative energy criterion and combined with a linear kinetics theory accounting for time-dependent propagation of domain walls during switching processes. In addition, grain boundary effects are incorporated by making use of a macromechanically motivated probabilistic approach. Standard volume-averaging techniques with respect to the response on individual grains in the bulk ceramics are later on applied to obtain representative hysteresis and butterfly curves under macroscopically uniaxial loading conditions at different loading frequencies. It turns out that the simulations based on the developed finite element formulation nicely match experimental data reported in the literature.     

A finite element model of ferroelastic polycrystals

A finite element model of switching in polycrystalline ferroelastic ceramics is developed. It is assumed that a crystallite switches if the reduction in mechanically driven potential energy of the system exceeds a critical value per unit volume of switching material. Stress induced (i.e. ferroelastic) switching is a change of permanent strain in characteristic crystallographic directions. Martensitic twinning is one example, but the strain response of ferroelectric materials has the same characteristics. The model is suitable for representing ferroelastic systems such as shape memory alloys and as a preliminary model for ferroelectric/ferroelastic materials such as perovskite piezoelectrics. In the simulations, each crystallite is represented by a finite element and the crystallographic principal direction for each crystallite is assigned randomly. Different critical values for the energy barrier to switching are selected to simulate stress vs strain hysteresis loops of a ceramic lead lanthanum zirconate titanate (PLZT) at room temperature. The measured stress versus strain curves of polycrystalline ceramics designated PZT-A and PZT-B are also reproduced by the model.     

Three-dimensional finite element simulations of ferroelectric polycrystals under electrical and mechanical loading

Complex, non-linear, irreversible, hysteretic behavior of polycrystalline ferroelectric materials under a combined electro-mechanical loading is a result of domain wall motion, causing simultaneous expansion and contraction of unlike domains, grain sub-divisions that have distinct spontaneous polarization and strain. In this paper, a 3-dimensional finite element method is used to simulate such a polycrystalline ferroelectric under electrical and mechanical loading. A constitutive law due to Huber et al. [1999. A constitutive model for ferroelectric polycrystals. J. Mech. Phys. Solids 47, 1663-1697] for switching by domain wall motion in multidomain ferroelectric single crystals is employed in our model to represent each grain, and the finite element method is used to solve the governing conditions of mechanical equilibrium and Gauss's law. The results provide the average behavior for the polycrystalline ceramic. We compare the outcomes predicted by this model with the available experimental data for various electromechanical loading conditions. The qualitative features of ferroelectric switching are predicted well, including hysteresis and butterfly loops, the effect on them of mechanical compression, and the response of the polycrystal to non-proportional electrical loading.     

Energy principle of ferroelectric ceramics and single domain mechanical model

Many physical experiments have shown that the domain switching in a ferroelectric material is a complicated evolution process of the domain wall with the variation of stress and electric field. According to this mechanism, the volume fraction of the domain switching is introduced in the constitutive law of ferroelectric ceramic and used to study the nonlinear constitutive behavior of ferroelectric body in this paper. The principle of stationary total energy is put forward in which the basic unknown quantities are the displacement u _i , electric displacement D _i and volume fraction ρ _I of the domain switching for the variant I. Mechanical field equation and a new domain switching criterion are obtained from the principle of stationary total energy. The domain switching criterion proposed in this paper is an expansion and development of the energy criterion. On the basis of the domain switching criterion, a set of linear algebraic equations for the volume fraction ρ _I of domain switching is obtained, in which the coefficients of the linear algebraic equations only contain the unknown strain and electric fields. Then a single domain mechanical model is proposed in this paper. The poled ferroelectric specimen is considered as a transversely isotropic single domain. By using the partial experimental results, the hardening relation between the driving force of domain switching and the volume fraction of domain switching can be calibrated. Then the electromechanical response can be calculated on the basis of the calibrated hardening relation. The results involve the electric butterfly shaped curves of axial strain versus axial electric field, the hysteresis loops of electric displacement versus electric filed and the evolution process of the domain switching in the ferroelectric specimens under uniaxial coupled stress and electric field loading. The present theoretic prediction agrees reasonably with the experimental results given by Lynch. The project supported by the National Natural Science Foundation of China (10572138).     

Phenomenological model for the macroscopical material behavior of ferroelectric ceramics

A thermodynamically consistent phenomenological model for the simulation of the macroscopic behavior of ferroelectric polycrystalline ceramics is presented. It is based on the choice of microscopically motivated internal state variables, which describe the texture and the polarization state of the polycrystal. Saturation states are defined for the internal state variables. The linear material behavior is modelled by a transversely isotropic piezoelectric constitutive law, where the anisotropy is history dependent. For non-linear irreversible processes, a switching function and associated evolution rules are applied, satisfying the principle of maximum ferroelectric dissipation. Saturation is modelled by the use of energy-barrier functions in the electric enthalpy density function. Numerical examples demonstrate the capability of the proposed model, to predict the typical experimental results.     

On the fracture toughness of ferroelastic materials

The toughness enhancement due to domain switching near a steadily growing crack in a ferroelastic material is analyzed. The constitutive response of the material is taken to be characteristic of a polycrystalline sample assembled from randomly oriented tetragonal single crystal grains. The constitutive law accounts for the strain saturation, asymmetry in tension versus compression, Bauschinger effects, reverse switching, and strain reorientation that can occur in these materials due to the non-proportional loading that arises near a propagating crack. Crack growth is assumed to proceed at a critical level of the crack tip energy release rate. Detailed finite element calculations are carried out to determine the stress and strain fields near the growing tip, and the ratio of the far field applied energy release rate to the crack tip energy release rate. The results of the finite element calculations are then compared to analytical models that assume the linear isotropic K-field solution holds for either the near tip stress or strain field. Ultimately, the model is able to account for the experimentally observed toughness enhancement in ferroelastic ceramics.     

Fatigue crack growth induced by domain switching under electromechanical load in ferroelectrics

Reliability calls for a better understanding of the failure of ferroelectric ceramics. The fracture and fatigue of ferroelectric ceramics under an electric field or a combined electric and mechanical loading are investigated. The small-scale domain-switching model is modified to analyze failure due to fracture and fatigue. Effects of anisotropy and electromechanical load coupling are taken into account. Analytical expressions are obtained for domain-switching regions near the crack tip such that of 90° domain switching can be distinguished from 180° domain switching in addition to different initial poling directions. The crack tip stress intensity variation of ferroelectric ceramics due to the domain switching is analyzed. A positive electric field tends to enhance the propagation of an insulating crack perpendicular to the poling direction, while a negative field impedes it. Fatigue crack growth under various coupling loads and effects of the stress field and electric field on near field stress intensity variation are analyzed. Predicted crack growth versus cyclic electric field agrees well with experiment.     

Analysis of the electromechanical behavior of ferroelectric ceramics based on a nonlinear finite element model

A nonlinear finite element (FE) model based on domain switching was proposed to study the electromechanical behavior of ferroelectric ceramics. The incremental FE formulation was improved to avoid any calculation instability. The problems of mesh sensitivity and convergence, and the efficiency of the proposed nonlinear FE technique have been assessed to illustrate the versatility and potential accuracy of the said technique. The nonlinear electromechanical behavior, such as the hysteresis loops and butterfly curves, of ferroelectric ceramics subjected to both a uniform electric field and a point electric potential has been studied numerically. The results obtained are in good agreement with those of the corresponding theoretical and experimental analyses. Furthermore, the electromechanical coupling fields near (a) the boundary of a circular hole, (b) the boundary of an elliptic hole and (c) the tip of a crack, have been analyzed using the proposed nonlinear finite element method (FEM). The proposed nonlinear electromechanically coupled FEM is useful for the analysis of domain switching, deformation and fracture of ferroelectric ceramics.The project supported by the National Natural Science Foundation of China (10025209, 10132010 and 90208002), the Research Grants of the Council of the Hong Kong Special Administrative Region, China (HKU7086/02E) and the Key Grant Project of the Chinese Ministry of Education (0306)     

Unconventional domain band structure at the crack tip in ferroelectric ceramics

Domain polarization switch near the tip of a crack or an electrode plays a critical role in the fracture or toughening of ferroelectric ceramics. The intensive electric field near a crack tip stimulates local domain switching. Experiment indicates that the domain band structure in front of an indentation crack under lateral electric loading is unconventional, attributed to the highly localizing crack tip electric field. The partially switched ferroelectric grain resembles a banded Eshelby inclusion embedded in a polycrystalline ferroelectric matrix. The domain wall energy for unconventional domain structures is estimated via arrays of misfit dislocations. Mesomechanics analysis quantifies the unconventional domain band structures. The predicted parameters include the volume fraction, the thickness, and the orientation of switched domain bands.     

An energy-consistent fracture model for ferroelectrics

The fracture behavior of ferroelectrics has been intensively studied in recent decades, though currently a widely accepted fracture mechanism is still lacking. In this work, enlightened by previous experimental observations that crack propagation in ferroelectrics is always accompa-nied by domain switching, we propose a micromechanical model in which both crack propagation and domain switch-ing are controlled by energy-based criteria. Both electric energy and mechanical energy can induce domain switching, while only mechanical energy can drive crack propagation. Furthermore, constrained domain switching is considered in this model, leading to the gradient domain switching zone near the crack tip. Analysis results show that stress-induced ferroelastic switching always has a toughening effect as the mechanical energy release rate serves as the driving force for both fracture and domain switching. In compari-son, the electric-field-induced switching may have either a toughening or detoughening effect. The proposed model can qualitatively agree with the existing experimental results.     

A SIMPLE CONSTITUTIVE MODEL FOR FERROELECTRIC CERAMICS UNDER ELECTRICAL/MECHANICAL LOADING

A simple phenomenological model is developed for describing the macroscopic constitutive response of ferroelectric materials based on consideration of the fact that domain switching is a progressive evolution process with loading. The volume fraction of domain switching is taken as an internal variable, which is derived from the domain nucleation theory. The proposed theory can simulate the dielectric hysteresis, reversed butterfly hysteresis, nonlinear strain-stress hysteresis, as well as electric displacement-stress relation of ferroelectric materials. Its comparison with experimental results and two other theoretical models reveals that the model presented can well predict the nonlinear hysteresis of ferroelectrics under electrical or mechanical loading.     

铁电陶瓷PZT53复杂力电耦合行为的实验研究

通过实验研究了平行和垂直于极化方向的正应力对铁电陶瓷锆钛酸铅(PZT53)的电滞回线(E3-P3)和电致应变曲线(E-ε)的影响. 实验发现平行于极化方向的压应力对PZT53陶瓷的电滞回线、电致应变曲线形状以及矫顽场大小都有明显的影响,但是垂直于极化方向的拉、压应力只对PZT53陶瓷的电致应变曲线形状有明显的影响,但对电滞回线形状和矫顽场大小都没有显著影响. 采用畴翻转的模型详细解释了观察到的实验现象,所得结果为建立铁电陶瓷的多轴力、电耦合本构模型,提供了物理基础.     

铁电陶瓷宏观单轴力电行为的双面模型

铁电陶瓷以其优越的力电耦合性作为新型的智能材料使用. 提出基于弹塑性双面理论的宏观铁电本构模型. 根据铁电陶瓷内部电畴在外电场和机械场作用下的微观运动，在宏观上除引入材料的畴变面外，还首次引入饱和面，并考虑以畴变面与饱和面之间的广义距离来表征铁电陶瓷的非线性行为. 数值计算结果与实验数据的比较表明所提出的初步理论可适当地反映力电加载下铁电陶瓷的宏观非线性行为.     

A Micromechanics-based Finite Element Model for the Constitutive Behavior of Polycrystalline Ferromagnets

A micromechanics-based finite element model for the constitutive behavior of polycrystalline ferromagnets is developed. In the model, the polycrystalline solid is assumed to comprise numerous single crystals with randomly distributed crystallographic orientations, and the single crystals, in turn, consist of ferromagnetic domains, each of which is represented by a cubic element. The dipole directions of the domains are randomly assigned to simulate the crystallographic nature of ferromagnetic polycrystals. A switching criterion for the domains is specified at the microscopic level. The macroscopic constitutive behavior is obtained by averaging the microscopic/local behavior of each domain. The developed model has been applied to the simulation of a ferromagnetic material. With appropriate material parameters adopted, hysteresis loops of the predicted magnetic induction versus magnetic field and those of the strain versus magnetic field are shown to agree well with experimental observations.The project supported by the National Natural Science Foundation of China (90205030, 10472088, 10425210), the National Basic Research Program of China (2006CB601202) and the State Administration of the Foreign Experts Affairs Through the “111” Project (B06024) The English text was polished by Yunming Chen.