Assessing computer waste generation in Chile using material flow analysis

The quantities of e-waste are expected to increase sharply in Chile. The purpose of this paper is to provide a quantitative data basis on generated e-waste quantities. A material flow analysis was carried out assessing the generation of e-waste from computer equipment (desktop and laptop PCs as well as CRT and LCD-monitors). Import and sales data were collected from the Chilean Customs database as well as from publications by the International Data Corporation. A survey was conducted to determine consumers’ choices with respect to storage, re-use and disposal of computer equipment. The generation of e-waste was assessed in a baseline as well as upper and lower scenarios until 2020.The results for the baseline scenario show that about 10,000 and 20,000 tons of computer waste may be generated in the years 2010 and 2020, respectively. The cumulative e-waste generation will be four to five times higher in the upcoming decade (2010–2019) than during the current decade (2000–2009). By 2020, the shares of LCD-monitors and laptops will increase more rapidly replacing other e-waste including the CRT-monitors. The model also shows the principal flows of computer equipment from production and sale to recycling and disposal. The re-use of computer equipment plays an important role in Chile. An appropriate recycling scheme will have to be introduced to provide adequate solutions for the growing rate of e-waste generation.     

Analyzing composition and generation rates of biomedical waste in selected hospitals of Uttarakhand,India

In India, a few studies have been conducted for analyzing the generation rates and composition of medical waste (MW). Inadequate information about the amount and composition of MW results in ineffective management practices. The present study seeks to evaluate healthcare waste (HCW) generation rates by healthcare facilities (HCFs) available in Uttarakhand, a northern state of India. Study also focuses on modeling the quantity of different types of MW generated at various HCFs and determining significant factors contributing towards MW generation. Seasonal variation in amount of MW generated from various HCFs has also been considered. To achieve these objectives, cross-sectional as well as longitudinal data have been collected from various HCFs in Uttarakhand, India. The survey revealed that around 36% of the total HCFs did not segregate their MW as per policy guidelines. Cross-sectional data for May 2015 were collected from 75 HCFs to analyze and model the composition and quantity of HCW generated. Multiple Linear Regression and Artificial Neural Network techniques were applied to model cross-sectional data. In the composition of the overall MW, ‘yellow waste’ carries the maximum share, followed by ‘red waste’ and then the ‘blue waste’. In addition, the ‘type of HCF’ and ‘bed occupancy’ have been modeled as the important factors, contributing towards the MW generations rates. Longitudinal data for 2 years (2013 and 2014) were collected to examine seasonal variation in HCW generation rates using polynomial regression analysis. Result shows that MW quantity also varies with the change in the season. Findings of the study will help hospitals and waste treatment facilities to predict amount of waste that may be generated, and plan resources towards efficient handling and disposal of MW.     

废旧电脑的综合处理与处置

随着社会文明的高速发展,越来越多的高科技新兴产品进入人们的生活,带给人们更多的方便和享受的同时,也使城市生活垃圾结构发生了很大的改变,废电池、废电冰箱、废电脑等家用电器及其废物的另类生活垃圾成为今天新的环境问题.从环境管理和绿色处理的角度,综合概述了国内外废旧电脑处理的现状,结合国外的发展经验从绿色处理的角度对废旧电脑的处理与处置方法提出了一些建议.     

Monthly variations in solid waste generation

The monthly quantities of residential, commercial, industrial and other wastes generated between 1985–1989 in Brown County, Wisconsin, U.S.A. are analysed. For each month and each waste type, the quantity of waste generated is compared with the monthly average and the difference is computed as a percentage. The means and standard deviations of these percentage differences are computed for each month using the five values computed for each of the five years. The generation patterns for residential, commercial, construction and demolition wastes, and discarded tires show lower than average generation in winter months and higher than average in summer months, with the residential and commercial components being the most predictable. Ash has the opposite pattern with the most produced in winter months. General industrial wastes are produced at an almost constant rate throughout the year, typically varying by less than 10% from the monthly average. Sludge appears to be the least predictable component of the waste stream.     

Estimation of waste generation from floods

A framework of correlation for estimating the amount of waste generation from floods is developed. Flood waste data were collected from four recent typhoons in Taiwan. Parameters affecting the flood waste are analyzed. Population density, flooded area and amount of total rainfall are chosen as the correlating parameters for the model development, and regression diagnostics are performed to check the validity of the collected data. The simple linear model is shown to be incapable of correlating the flood waste data. An exponential model is proposed and shown to give acceptable correlation with the flood waste data spanning five orders of magnitude. The model can be useful in the planning of waste cleanup after floods.     

Recent trends in recycling activities and waste management in Japan

Japan's basic approach to municipal solid waste (MSW) is (1) waste reduction, (2) promotion of recycling, (3) volume reduction by intermediate treatment, and (4) environmentally sound final disposal. A brief history of legislative trends in waste management is given as background for current waste management and recycling activities. The material recovery rate for MSW collected by local municipalities was only 5.6% in 1996. More than half of MSW, on a volume basis, consists of containers and packages, while great amounts of landfill space are also taken up by bulky wastes such as electric appliances. Therefore, in order to promote recycling and decrease landfill waste, Japan is targeting containers, packages, and electric appliances. A law promoting separate collection and recycling of containers and packages (Packaging Waste Recycling Law) and a law requiring the recycling of specific home electric appliances into new products (Home Electric Appliance Recycling Law) were introduced in June 1995 and June 1998, respectively. These laws are in line with the OECD policy Extended Producer Responsibility (EPR). Received: September 16, 1998 / Accepted: March 10, 1999     

Medical waste generation in selected clinical facilities in Taiwan

This study investigated the type and amount of medical waste generated from small clinical facilities in Taiwan. We sampled 200 small medical establishments, with few or no patient beds, to survey the wastes generated and disposed. The surveyed medical facilities consisted of four groups including private clinics, medical laboratories, blood centers and public clinics. Private clinics providing surgical, dental, obstetrical, and dialysis services were included in this survey because they may generate higher amounts of infectious waste than other specialties. The overall mean general waste production rate was 3.97 kg/bed/day (or 0.075 kg/patient/day) at all the surveyed facilities, higher than that obtained from larger hospitals in Taiwan, which ranged from 2.41 to 3.26 kg/bed/day. The highest amount of infectious wastes generated among the four groups of facilities were from blood centers (3.14 kg/bed/day), followed by private clinics, medical laboratories and public clinics (1.91, 1.07, and 0.053 kg/bed/day, respectively). The overall average was 2.08 kg/bed/day. This study suggests that the waste generated at small medical facilities ranged widely.     

Intensity of hospital waste generation and disposal in the selected hospitals in Kerala,India: an analysis based on hospital ownership

Journal of Material Cycles and Waste Management - Management of hospital wastes has been considered as an integral part of hospital hygiene and infection control, which in turn depends on the...     

Estimation of construction waste generation and management in Thailand

This study examines construction waste generation and management in Thailand. It is estimated that between 2002 and 2005, an average of 1.1 million tons of construction waste was generated per year in Thailand. This constitutes about 7.7% of the total amount of waste disposed in both landfills and open dumpsites annually during the same period. Although construction waste constitutes a major source of waste in terms of volume and weight, its management and recycling are yet to be effectively practiced in Thailand. Recently, the management of construction waste is being given attention due to its rapidly increasing unregulated dumping in undesignated areas, and recycling is being promoted as a method of managing this waste. If effectively implemented, its potential economic and social benefits are immense. It was estimated that between 70 and 4,000 jobs would have been created between 2002 and 2005, if all construction wastes in Thailand had been recycled. Additionally it would have contributed an average savings of about 3.0 x 10(5) GJ per year in the final energy consumed by the construction sector of the nation within the same period based on the recycling scenario analyzed. The current national integrated waste management plan could enhance the effective recycling of construction and demolition waste in Thailand when enforced. It is recommended that an inventory of all construction waste generated in the country be carried out in order to assess the feasibility of large scale recycling of construction and demolition waste.     

Report on hazardous household waste generation in Japan.

Surveys of over 2000 households in Japan were conducted to investigate the characteristics of hazardous household waste (HHW) generation. In Japan, about 2.5 to 4.3 kg of HHW are produced per tonne of the residential waste stream. The percentage of used batteries in HHW was over 50%. Every household using spray (aerosol) cans had more than seven cans on average. The generation of HHW, in terms of both quantities and type of waste produced, appeared to vary with dwelling type. Detached dwelling residents tended to store HHW such as used batteries, whereas apartment residents tended not to store waste. The amounts of discarded HHW were larger at the end of the year in comparison with other months. The data accumulated were used to estimate the quantities of HHW disposed off annually, and the quantities and type of waste that might be received by a typical depot collection programme in Japan.     

硫磺制酸厂余热发电技术

介绍了硫磺制酸厂利用余热发电的工艺流程，设备配置及其运行效果。     

Municipal solid waste characteristics and management in Allahabad, India

Increasing population levels, rapid economic growth and rise in community living standard accelerates the generation rate of municipal solid waste (MSW) in Indian cities. Improper management of MSW causes hazards to inhabitants. The objectives of the study are to determine the quantitative and qualitative characteristics of MSW along with basic information and to create GIS maps for Allahabad city. The samples have been randomly collected from various locations and analyzed to determine the characteristics of MSW. A questionnaire survey has been carried out to collect data from inhabitants including MSW quantity, collection frequency, satisfaction level, etc. The Geographic Information System (GIS) has been used to analyze existing maps and data, to digitize the existing sanitary ward boundaries and to enter the data about the wards and disposal sites. The total quantity of MSW has been reported as 500 ton/day, and the average generation rate of MSW has been estimated at 0.39 kg/capita/day. The generated ArcGis maps give efficient information concerning static and dynamic parameters of the municipal solid waste management (MSWM) problem such as the generation rate of MSW in different wards, collection point locations, MSW transport means and their routes, and the number of disposal sites and their attributes.     

Ensilage of pineapple processing waste for methane generation

Pineapple peel wastes, which are seasonal, comprise of peels and rags. Their disposal poses a serious environmental pollution problem. Since pineapple peel is rich in cellulose, hemicellulose and other carbohydrates it was found to be a potential substrate for methane generation by anaerobic digestion. Ensilaging of pineapple peel resulted in the conversion of 55% carbohydrates into volatile fatty acids. The ensilage of pineapple processing wastes reduced the biological oxygen demand by 91%. Biogas digester fed with ensilaged pineapple peel resulted in the biogas yield of 0.67 m3/kg volatile solids (VS) added with methane content of 65% whereas fresh and dried pineapple peels gave biogas yields of 0.55% and 0.41 m3/kg VS added and methane content of 51% and 41% respectively.     

Mathematical modeling to predict residential solid waste generation

One of the challenges faced by waste management authorities is determining the amount of waste generated by households in order to establish waste management systems, as well as trying to charge rates compatible with the principle applied worldwide, and design a fair payment system for households according to the amount of residential solid waste (RSW) they generate. The goal of this research work was to establish mathematical models that correlate the generation of RSW per capita to the following variables: education, income per household, and number of residents. This work was based on data from a study on generation, quantification and composition of residential waste in a Mexican city in three stages. In order to define prediction models, five variables were identified and included in the model. For each waste sampling stage a different mathematical model was developed, in order to find the model that showed the best linear relation to predict residential solid waste generation. Later on, models to explore the combination of included variables and select those which showed a higher R(2) were established. The tests applied were normality, multicolinearity and heteroskedasticity. Another model, formulated with four variables, was generated and the Durban-Watson test was applied to it. Finally, a general mathematical model is proposed to predict residential waste generation, which accounts for 51% of the total.     

Modelling seasonal variation in biomedical waste generation at healthcare facilities

A mathematical model can help waste planners to optimize waste management systems related to environmental protection. It can also help government bodies set guidelines and regulations, and evaluate prevailing strategies for handling and disposal of waste. In this paper, a technique to develop a mathematical model to correlate the generation rate of biomedical waste (contaminated with blood and body fluid) as a function of bed occupancy and type of ailment (in terms of seasonal changes) using data for two consecutive years from three different healthcare facilities is presented. The data exhibit different trends in biomedical waste generation rates and number of beds occupied in two different years. However, the seasonal variation in biomedical waste production rate remained nearly the same during these 2 years. The fixed trend in biomedical waste generation rate in two consecutive years could be due to similar seasonal illnesses pattern and social factors.     

Modelling municipal solid waste generation: a review

The objective of this paper is to review previously published models of municipal solid waste generation and to propose an implementation guideline which will provide a compromise between information gain and cost-efficient model development. The 45 modelling approaches identified in a systematic literature review aim at explaining or estimating the present or future waste generation using economic, socio-demographic or management-orientated data. A classification was developed in order to categorise these highly heterogeneous models according to the following criteria--the regional scale, the modelled waste streams, the hypothesised independent variables and the modelling method. A procedural practice guideline was derived from a discussion of the underlying models in order to propose beneficial design options concerning regional sampling (i.e., number and size of observed areas), waste stream definition and investigation, selection of independent variables and model validation procedures. The practical application of the findings was demonstrated with two case studies performed on different regional scales, i.e., on a household and on a city level. The findings of this review are finally summarised in the form of a relevance tree for methodology selection.     

垃圾焚烧中抑制二恶英二次生成的方法探讨

根据生活垃圾焚烧技术中二恶英的生成机理,余热锅炉的烟气在低温区急冷可以避免二恶英在低温区的再次合成,但目前在余热锅炉烟气低温区急冷是不可行的。提出一种从垃圾焚烧系统设计上进行烟气的急冷,从而抑制二恶英低温区二次生成的新方法。     

Solid waste management in Kolkata, India: practices and challenges

This paper presents an overview of current solid waste management (SWM) practices in Kolkata, India and suggests solutions to some of the major problems. More than 2920ton/d of solid waste are generated in the Kolkata Municipal Corporation (KMC) area and the budget allocation for 2007-2008 was Rs. 1590 million (US$40 million), which amounts to Rs. 265/cap-y (US$6.7/cap-d) on SWM. This expenditure is insufficient to provide adequate SWM services. Major deficiencies were found in all elements of SWM. Despite 70% of the SWM budget being allocated for collection, collection efficiency is around 60-70% for the registered residents and less than 20% for unregistered residents (slum dwellers). The collection process is deficient in terms of manpower and vehicle availability. Bin capacity provided is adequate but locations were found to be inappropriate, thus contributing to the inefficiency of the system. At this time, no treatment is provided to the waste and waste is dumped on open land at Dhapa after collection. Lack of suitable facilities (equipment and infrastructure) and underestimates of waste generation rates, inadequate management and technical skills, improper bin collection, and route planning are responsible for poor collection and transportation of municipal solid wastes.     

Evaluation of compositional characteristics of organic waste shares in municipal solid waste in fast-growing metropolitan cities of India

Journal of Material Cycles and Waste Management - India currently has the second largest urban population worldwide, while facing an increasing burden on its urban solid waste infrastructure. To...