DNA-HRP/聚L-酪氨酸共修饰电极的制备及其电化学性能的研究

以聚L-酪氨酸膜为载体,固载DNA和辣根过氧化物酶(HRP)制备过氧化氢生物传感器.该传感器对H2O2表现出良好的催化还原特性,具有灵敏度高,稳定性好且易于制作等特点.其线性响应范围为: 2.0×10-6～1.1×10-2 mol/L,检出限为8.0×10-7 mol/L (S/N=3).     

基于三维有序大孔金电极的过氧化氢无酶传感器

采用反相胶体-晶体模板技术以及电化学沉积法制得了三维有序大孔金膜修饰电极,并对修饰电极进行了表征,在此基础上构建了新型的H2O2无酶传感器。研究表明,此传感器在1×10-6～5.5×10-5mol/L和8×10-5～1.3×10-3mol/L范围内对H2O2还原峰电流有良好的线性响应;检出限为3.3×10-7mol/L(S/N=3),具有良好的稳定性和重现性。     

基于自组装L-半胱氨酸与纳米金的H2O2生物传感器

通过在金电极表面自组装L-半胱氨酸,再分别吸附纳米金与辣根过氧化物酶(HRP)的方法,成功的制备了H2O2生物传感器.采用循环伏安法考察了传感器的电化学特性,电极对H2O2在浓度为2.1×10-6～3.6×10-3 mol/L的范围内呈线性,检出限为8.9×10-7 mol/L (S/N＝3).该传感器具有稳定性好,线性范围宽,检出限低等优点,同时具有一定的抗干扰能力.     

基于静电自组装作用制备聚二烯丙基二甲基氯化铵巯基乙酸修饰金电极检测亚硝酸盐

利用常见易得的原材料聚二烯丙基二甲基氯化铵(PDDA)和巯基乙酸(MA),基于静电组装技术制备了PDDA-MA/Au传感器,用于亚硝酸盐的检测.试验表明,在0.2 mol/L磷酸缓冲盐溶液(PBS,pH 7.53,0.1 mol/L NaAc)中,NaNO_2的氧化峰电流与其浓度在6.9×10~(-7)~8.8×10~(-3)mol/L之间呈现良好的线性关系,试验测得检出限为6.9×10~(-7)mol/L,回收率在94.6%~101.8%之间.传感器制备简单、成本低,对NaNO_2具有较高的灵敏度、较低的检测限、良好的稳定性及重现性.     

基于硫堇/碳纳米管修饰金电极的过氧化氢生物传感器

制备了以硫堇(TH)、纳米金(Nano-Au)及多壁碳纳米管(MWNT)修饰的H2O2生物传感器.探讨了工作电位、温度、pH对电极响应的影响,考察了电极的重现性、抗干扰能力及使用寿命.该传感器具有线性范围宽、检出限低、灵敏度高、稳定性好和抗干扰能力强等特点.其线性范围为7.0×10-7～4.0×10-3 mol/L;检出限为2.3×10-7 mol/L;灵敏度为0.13 A/(mol L-1 cm2);达到稳定电流所用时间《9 s.米氏常数为0.62 mmol/L,表明所固定的酶具有较高的生物活性.     

基于碳纳米管-纳米二氧化锰增强的H2O2修饰电极的研制

将碳纳米管(CNT)和纳米二氧化锰(Nano-MnO2)分散在壳聚糖(CHIT)溶液中,用涂敷法固定到玻碳电极表面,制成修饰电极.由于碳纳米管具有良好的电子传递性能,使纳米二氧化锰对H2O2的电催化活性明显提高,通过循环伏安法、计时电流法对传感器的性能进行了研究.在最佳测试条件下,该传感器对H2O2的线性范围为1.5×10-6 ～5.0×10-2 mol/L,检出限为4×10-7 mol/L.用于实际样品的测定,结果满意.     

辣根过氧化酶在磁性纳米修饰的离子注入电极上的电化学和电催化行为

辣根过氧化酶(HRP)在Co/NH2/ITO离子注入电极上有一对良好的氧化还原峰,峰电位分别为Epc=-0.2 V,Epa=-0.01 V(vsAg/AgCl)。该修饰电极对H2O2具有催化作用,可以用作H2O2的生物传感器,峰电流与H2O2的浓度分别在1.0×10-10~2.0×10-8mol/L和2.0×10-8~1.0×10-7mol/L范围内呈线性关系,线性回归方程分别为Ip(mA)=2.2986+0.06632c(nmol/L)和Ip(mA)=3.5788+7.3053E-4c(nmol/L),相关系数分别为0.9972和0.9688。检出限为1.0×10-10mol/L。     

基于聚亚甲基蓝和碳纳米管/辣根过氧化物酶的有机过氧化物传感器

本文结合层层组装法和电化学聚合法,制备了电子介体聚亚甲基蓝(PMB)修饰的碳纳米管(CNTs)/辣根过氧化物酶(HRP)多层膜有机过氧化物传感器。利用电化学阻抗表征了(CNTs/HRP)n的层层组装过程,探讨了不同HRP层数对传感器响应的影响,并研究了传感器对有机过氧化物过氧化氢叔丁基、过氧化氢异丙基苯的电催化还原性能。该传感器对过氧化氢叔丁基的线性检测范围为1.75×10-5～7.25×10-3mol/L,检测限为1.36×10-6 mol/L;对过氧化氢异丙基苯的线性检测范围为3.87×10-6～1.47×10-3 mol/L,检测限为6.48×10-7 mol/L。     

一种新型连续检测镉离子和焦磷酸阴离子的逻辑门荧光传感器及其细胞成像研究

设计并合成了一种基于8-羟基喹啉(8-HQ)的连续检测Cd~(2+)和焦磷酸阴离子(PPi)的荧光传感器L.在传感器L的DMSO/H2O(V/V=1/1,0.01mol/L,Hepes-HClbuffer,pH=7.20)溶液中加入Cd~(2+)后导致荧光发射峰(Em=537 nm)猝灭,检测限低至5.87×10~(-8) mol/L.通过Job's曲线图和质谱验证传感器L和Cd~(2+)离子之间以1∶1化学计量比结合,结合常数为4.38×10~4 L/mol.复合传感器L-Cd~(2+)体系具有通过配体置换法对PPi高度选择性检测性能. L可以作为一种逻辑门荧光传感器检测Cd~(2+)和PPi.传感器L可以用于对活细胞中的Cd~(2+)和PPi的荧光成像.     

碳纳米管负载铂-二氧化钌纳米颗粒用于葡萄糖传感器的研究

建立了多壁碳纳米管(MWNTs)负载铂二二氧化钌纳米颗粒的液相化学还原法.以Nafion为固定剂,将Pt-RuO2/MWNTs复合材料修饰于玻碳电极的表面,制备了一种无酶型葡萄糖传感器.实验表明:复合材料修饰的电极对葡萄糖响应电流明显,并且受抗坏血酸(AA)、多巴胺(DA)和尿酸(UA)的干扰小.本实验采用安培法测定葡萄糖,线性范围为2 0×10 3～1.0×10-2 mol/L(R～0.9965);灵敏度为119.26 μA cm-2(mmol/L)-1;检出限为1.25×10 -5 mol/L(信噪比为3);响应时间为4.8 s.PtRuO2/MWNTs修饰电极可作为性能良好的无酶型葡萄糖传感器.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.