Synthesis of cross-linked graphene aerogel/Fe2O3 nanocomposite with enhanced supercapacitive performance

In this work, cross-linked graphene aerogel (CL-GA) and its composite with Fe₂O₃ nanoparticles (NPs) were synthesized through a one-step hydrothermal procedure by using p-phenylenediamine (PPD). Structural characterizations revealed that in the preparation of the composite PPD acts as a cross-liker and provides high surface area by decreasing restacking of graphene sheets and functions as nitrogen source simultaneously. The electrochemical characteristics of the nanocomposite were investigated by cyclic voltammetry (CV), galvanostatic charge/discharge, electrochemical impedance spectroscopy (EIS) and Fast Fourier transform continues cyclic voltammetry (FFTCCV). The results show that cross-linked graphene aerogel/Fe₂O₃ (CL-GA/Fe₂O₃) nanocomposite displays enhanced supercapacitive performance, where it has capacitance of 445 at 1 A g⁻¹, high energy density of 63 W h Kg⁻¹, and 89% capacitance retention after 5000 cycles in 3 M KOH. Presence of PPD considerably improved supercapacitive performance of nanocomposite as a result it could be promising material in synthesis of efficient graphene/metal oxide-based electrode material for high performance supercapacitors.     

Enhanced cycling performance of Fe3O4-graphene nanocomposite as an anode material for lithium-ion batteries

Fe₃O₄-graphene nanocomposite was prepared by a gas/liquid interface reaction. The structure and morphology of the Fe₃O₄-graphene nanocomposite were characterized by X-ray diffraction, scanning electron microscopy and high-resolution transmission electron microscopy. The electrochemical performances were evaluated in coin-type cells. Electrochemical tests show that the Fe₃O₄-22.7 wt.% graphene nanocomposite exhibits much higher capacity retention with a large reversible specific capacity of 1048 mAh g⁻¹ (99% of the initial reversible specific capacity) at the 90th cycle in comparison with that of the bare Fe₃O₄ nanoparticles (only 226 mAh g⁻¹ at the 34th cycle). The enhanced cycling performance can be attributed to the facts that the graphene sheets distributed between the Fe₃O₄ nanoparticles can prevent the aggregation of the Fe₃O₄ nanoparticles, and the Fe₃O₄-graphene nanocomposite can provide buffering spaces against the volume changes of Fe₃O₄ nanoparticles during electrochemical cycling.     

Hydrothermal synthesis of reduced graphene oxide-Mn3O4 nanocomposite as an efficient electrode materials for supercapacitors

Mn₃O₄ nanoparticles (NPs) are decorated with reduced graphene oxide nanosheets (rGO-Mn₃O₄) through a facile and eco-friendly hydrothermal method. The as-synthesized composite was characterized by XRD, SEM, TEM and Raman spectroscopy. The electrochemical properties of (rGO-Mn₃O₄) nanocomposite were studied as electrode materials for supercapacitors. The rGO-Mn₃O₄ nanocomposite exhibit high specific capacitance of 457 Fg^?1 at 1.0 A/g in 1 M Na₂SO₄ aqueous electrolyte. The rGO-Mn₃O₄ exhibits good capacitance retention by achieving 91.6% of its initial capacitance after 5000 cycles. The excellent electrochemical performance is attributed to the increased electrode conductivity in the presence of graphene network.     

Synthesis of nitrogen-doped graphene-based binary composite aerogels for ultralightweight and broadband electromagnetic absorption

The development of ultralightweight and broadband electromagnetic wave (EMW) absorbing materials remains a big challenge. In this work, porous magnesium ferrite microspheres decorated nitrogen-doped reduced graphene oxide (NRGO/MgFe₂O₄) composite aerogels were prepared by a two-step route of solvothermal synthesis and hydrothermal self-assembly. Results of microscopic morphology characterization showed that NRGO/MgFe₂O₄ composite aerogels had a unique hierarchical porous structure. Moreover, the influence of additive amounts of graphene oxide on the electromagnetic parameters and EMW absorption properties of NRGO/MgFe₂O₄ composite aerogels was explored. Remarkably, the attained binary composite aerogel with the content of NRGO of 70.21 wt% exhibited the best EMW absorption performance. The minimum reflection loss reached up to −55.7 dB, and the corresponding effective absorption bandwidth was as large as 5.36 GHz at a thin matching thickness of 1.98 mm. Furthermore, when the matching thickness was slightly increased to 2.29 mm, the widest effective absorption bandwidth was enlarged to 7.1 GHz, covering the entire Ku-band. The magnetodielectric synergy and unique hierarchical porous structure in NRGO/MgFe₂O₄ composite aerogels not only improved the impedance matching, but also greatly enhanced the EMW absorption capacity. It was believed that the results of this work could be helpful for the preparation of graphene-based magnetic composites as broadband and efficient EMW absorbers.     

Effect of reduction temperature on the preparation of zero-valent iron aerogels for trichloroethylene dechlorination

Zero-valent iron (ZVI) aerogels have been synthesized by sol-gel method and supercritical CO₂ drying, followed by H₂ reduction in the temperature range of 350–500 °C. When applied to trichloroethylene (TCE) dechlorination, the ZVI aerogel reduced at 370 °C showed the highest performance in the conditions employed in this study. Thus, the effect of reduction temperature in preparing ZVI aerogels has been investigated by several characterizations such as BET, XRD, TPR, and TEM analyses. As the reduction temperature decreased from 500 to 350 °C, the BET surface area of the resulting aerogels increased from 6 to 30 m²/g, whereas their Fe⁰ content decreased up to 64%. It was also found that H₂ reduction at low temperatures such as 350 and 370 °C leads to the formation of ZVI aerogel particles consisting of both Fe⁰ and FeO _x in the particle cores with a different amount ratio, where FeO _x is a mixture of maghemite and magnetite. It is, therefore, suggested that reduction at 370 °C for ZVI aerogel preparation yielded particles homogeneously composed of Fe⁰ and FeO _x in the amount ratio of 87/13, resulting in high TCE dechlorination rate. On the other hand, when Pd- and Ni-ZVI aerogels were prepared via cogellation and then applied for TCE dechlorination, we also observed a similar effect of reduction temperature. However, the reduction at 350 or 370 °C produced Pd- or Ni-ZVI aerogel particles in which Fe⁰ and Fe₃O₄ co-exist homogeneously. Since both Fe⁰ and Fe₃O₄ are advantageous in TCE dechlorination, the activities of Pd- and Ni-ZVI aerogels reduced at 350 °C were comparable to those of both aerogels reduced at 370 °C, although the former aerogels have less Fe⁰ content.     

Improved interfacial properties of carbon fiber-reinforced epoxy composites with Fe2O3/graphene nanosheets using a magnetic field

The performance of carbon fiber-reinforced composites largely depends on the properties of the fiber-matrix interface. Here, to improve the interfacial strength properties of carbon fiber/epoxy composites, we doped different concentrations of Fe₂O₃/graphene nanosheets onto the interfacial region of the carbon fiber composites by nano-coating technology. With the aid of the magnetic field, the arrangement of nanosheets could be controlled in the interface. The nanosheets can be arranged on the carbon fiber surface parallel or perpendicularly with different concentrations. The tensile strength and interfacial shear strength of the modified fiber microcomposites had increased by 22.1 and 44.4% respectively with 1.0 mg/mL Fe₂O₃/graphene nanosheets. The results indicated that the Fe₂O₃/graphene nanosheets have an important influence on the carbon fibers and carbon fibers composites.     

One-step electrosynthesis of MnO2/rGO nanocomposite and its enhanced electrochemical performance

We present a facile one-step electrochemical approach to generate MnO₂/rGO nanocomposite from a mixture of Mn₃O₄ and graphene oxide (GO). The electrochemical conversion of Mn₃O₄ into MnO₂ through potential cycling is expedited in the presence of GO while the GO is reduced into reduced graphene oxide (rGO). The MnO₂ nanoparticles are evenly distributed on the rGO nanosheets and act as the spacer to prevent rGO nanosheets from restacking. This unique structure provides high electroactive surface area (1173?m² g^?1) that improves ions diffusion within the MnO₂/rGO structure. As a result, the MnO₂/rGO nanocomposite exhibits high specific capacitance of 473?F?g^?1 at 0.25?A?g^?1, which is remarkably higher (3 times) than the Mn₃O₄/GO prior conversion. In addition, the electrosynthesized nanocomposite shows higher conductivity and excellent potential cycling stability of 95% at 2000 cycles.     

Structure and electrochemical performance of nanostructured Fe3O4/carbon nanotube composites as anodes for lithium ion batteries

Polyvinyl alcohol (PVA) was used as a hydrogen bond functionalizing agent to modify multi-walled carbon nanotubes (CNTs). Nanoparticles of Fe₃O₄ were then formed along the sidewalls of the as-modified CNTs by the chemical coprecipitation of Fe²⁺ and Fe³⁺ in the presence of CNTs in an alkaline solution. The structure and electrochemical performance of the Fe₃O₄/CNTs nanocomposite electrodes have been investigated in detail. Electrochemical tests indicated that at the 145th cycle, the CNTs-66.7 wt.%Fe₃O₄ nanocomposite electrode can deliver a high discharge capacity of 656 mAh g⁻¹ and stable cyclic retention. The improvement of reversible capacity and cyclic performance of the Fe₃O₄/CNTs nanocomposite could be attributed to the nanosized Fe₃O₄ particles and the network of CNTs.     

Constructing three-dimensional Li-transport channels within the Fe3O4@SiO2@RGO composite to improve its electrochemical performance in Li-ion batteries

Magnetite Fe₃O₄ particles are usually pulverized when used as the anode material for Li-ion batteries and thus the solid electrolyte interface film grows on the surface progressively, leading to inferior cycling performance and poor rate capability. To solve these issues, core-shell Fe₃O₄@SiO₂ particles are wrapped by reduced graphene oxide (RGO), and meso-/micro-pores are produced not only in the SiO₂ layers but also in the RGO nanosheets by chemical etching, forming three-dimensional (3D) continuous channels for Li⁺ transportation. Benefiting from this unique structure, the as-prepared Fe₃O₄@mSiO₂@RGO composite can deliver a capacity of 1630 mA h g⁻¹ at 0.1 A g⁻¹ over the potential range of 0.01–3.00 V (vs. Li⁺/Li) in the first discharge along with an initial coulombic efficiency of 86%, and can retain the capacity of 514 mA h g⁻¹ at 5 A g⁻¹ after 1000 cycles, exhibiting an outstanding rate capability and a long-term span life. The results indicate that pseudocapacitive behavior enables this composite to charge/discharge fast while the porous SiO₂ shell and RGO nanosheets effectively accommodate the volume change of the Fe₃O₄ particles during cycling. Our findings provide a feasible strategy for improving the electrochemical properties of the Fe₃O₄ anode in Li-ion batteries.     

Mn3O4 nanoparticles embedded into graphene nanosheets: Preparation, characterization, and electrochemical properties for supercapacitors

Mn₃O₄/graphene nanocomposites were synthesized by mixing graphene suspension in ethylene glycol with MnO₂ organosol, followed by subsequent ultrasonication processing and heat treatment. The as-prepared product consists of nanosized Mn₃O₄ particles homogeneously distributed on graphene nanosheets, which has been confirmed by field emission scanning electron microscopy and transmission electron microscopy analysis. Atomic force microscope analysis further identified the distribution of dense Mn₃O₄ nanoparticles on graphene nanosheets. When used as electrode materials in supercapacitors, Mn₃O₄/graphene nanocomposites exhibited a high specific capacitance of 175 F g⁻¹ in 1 M Na₂SO₄ electrolyte and 256 F g⁻¹ in 6 M KOH electrolyte, respectively. The enhanced supercapacitance of Mn₃O₄/graphene nanocomposites could be ascribed to both electrochemical contributions of Mn₃O₄ nanoparticles, functional groups attached to graphene nanosheets, and significantly increased specific surface area.     

RGO/KMn8O16 composite as supercapacitor electrode with high specific capacitance

Reduced graphene oxide/cryptomelane (RGO/KMn₈O₁₆) composites are successfully synthesized from α-MnO₂ nanorods and GO using a water-bathing precipitation method. The unique structure of KMn₈O₁₆ nanorods, with a length of 2–4 μm, dispersed on the surface of RGO leads to a much enhanced electrical conductivity and ionic transport, finally achieving composites with an improved electrochemical performance. Electrochemical measurement results show a specific capacitance of 222.3 F/g at a current density of 0.2 A/g, much higher than that of the original α-MnO₂. After 500 cycles at 2.0 A/g, the RGO/KMn₈O₁₆ composite electrode still retains 92.6% of its initial specific capacitance. The excellent electrochemical performance and durability observed for this composite electrode suggest its potential application for electrochemical capacitors.     

Fabrication of paper based carbon/graphene/ZnO aerogel composite decorated by polyaniline nanostructure: Investigation of electrochemical properties

The cellulose derived carbon/graphene/ZnO aerogel composite was prepared as an electrode in order to investigate the electrochemical properties. Carbon aerogel was synthesized using paper as an available cellulose source, and the composite was obtained through a new and simple preparation method including the immersion of monolithic carbon aerogel in graphene oxide/Zn²⁺ suspension and subsequent chemical reduction and freeze drying. The morphology, functional groups and crystalline structure of the samples were studied with Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffraction Spectroscopy (XRD), respectively. Electrochemical performance of the prepared binder free electrodes was examined using Cyclic Voltammetry (CV), Galvanostatic Charge-Discharge (GCD) and Electrochemical Impedance Spectroscopy (EIS). The data revealed that flexible carbon/graphene/ZnO composite resulted in a low density (0.035 g cm⁻³) electrode with the capacitance of 900 mF cm⁻² at a high current density of 10 mA cm⁻², lower IR drop and high cyclic stability (capacitance retention of 96%) after 1000 cycles, at 10 mA cm⁻². These features were due to the presence of 3D porous conductive network, highly reduced graphene oxide, and the formation of ZnO nanoparticles on graphene sheets. Moreover, polyaniline (PANI) was introduced to carbon/graphene/ZnO composite electrode using electro-oxidation method at different reaction time and aniline concentration in order to achieve remarkably improved capacitance of 2500 mF cm⁻² (at 10 mA cm⁻²) and low charge transfer resistance. Also, after the supercapacitor device assembly, the capacitance was retained. Based on the results, the synthesized composite is a promising material for new generation of lightweight freestanding electrodes with the high electrochemical performance.     

In situ sonochemical synthesis of Fe3O4–graphene nanocomposite for lithium rechargeable batteries

In this paper, we have presented experimental results for preparation of Fe₃O₄–graphene nanocomposite that uses an ultrasound assisted method. The graphene oxide (GO) was prepared from graphite powder using modified Hummers–Offeman method. Subsequently, the synthesis of graphene-Fe₃O₄ nanocomposite was carried out by ultrasound assisted co-precipitation of iron (II) and (III) chlorides in the presence of GO. The formation of GO and graphene-Fe₃O₄ nanocomposite was confirmed by X-ray diffraction (XRD), Energy dispersive X-ray (EDX) analysis and Fourier transform-infrared (FTIR) analysis. The particle size of Fe₃O₄ nanoparticles loaded on graphene nanosheets (observed from TEM image) was found to be smaller than 20 nm. The use of ultrasonic irradiations during synthesis of graphene-Fe₃O₄ nanocomposite resulted in uniform loading of Fe₃O₄ nanoparticles on graphene nanosheets. The prepared graphene-Fe₃O₄ nanocomposite material was used for the preparation of anode for lithium ion batteries. The electrochemical performance of the material was tested by cyclic voltammetry (CV) and charge/discharge cycles. It was observed that the capacity of Li-battery when the anode material was made using graphene-Fe₃O₄ nanocomposite showed stable electrochemical performance for around 120 cycles and the battery could repeat stable charge–discharge reaction.     

Enhanced electrochemical performance of hybrid composite microstructure of CuCo2O4 microflowers-NiO nanosheets on 3D Ni foam as positive electrode for stable hybrid supercapacitors

Self-assembled composite porous structures comprising CuCo₂O₄ microflowers and NiO hexagonal nanosheets were synthesized on a conducting 3D Ni foam surface [CCO/NO] using a simple hydrothermal method. This unique composite assembly was further characterized and electrochemically evaluated as a binder-free positive electrode for hybrid supercapacitor application. The study showed that the CCO/NO exhibited a maximum areal capacitance of 1444 mF cm^?2, significantly higher than the parent CuCo₂O₄ and NiO electrodes, with remarkable stability of 88.5% for 10,000 galvanostatic charge-discharge cycles. Key features for the enhanced electrochemical performance of CCO/NO can be related to a lowered diffusion resistance because the hybrid nanocomposite porous assembly generates short diffusion paths for electrolyte ions and more active sites for reversible faradaic transition for charge storage. The hybrid supercapacitor was assembled using activated carbon as a negative electrode and CCO/NO as a positive electrode in alkaline electrolyte, performed at an improved potential of 1.6 V. Device showed a maximum areal capacitance of 122 mF cm^?2, a maximum areal energy density of 43 μWh cm^?2, and a maximum areal power density of 5.1 mW cm^?2. This hybrid supercapacitor showed remarkable cyclic stability up to 98% for 10,000 cycles. This study encourages the development of low-cost, high-performance, durable electrode designs using hybrid composite for next-generation energy storage systems.     

Polyaniline grafted chitosan/GO-CNT/Fe3O4 nanocomposite as a superior electrode material for supercapacitor application

Developing appropriate stable electroactive electrode materials for supercapacitor application is the challenging issue, which attracts enormous attention in recent decades. In this regard, Fe₃O₄ nanoparticles are firstly synthesized on chitosan/graphene oxide-multiwall carbon nanotubes (CS/GM/Fe₃O₄). Then, polyaniline (PANI) is grafted on it via in situ chemical polymerization and named as CS/GM/Fe₃O₄/PANI. The as-prepared nanocomposites are characterized by Field emission scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and energy dispersive X-ray spectroscopy. The capacitive properties of the electrodes are investigated in a three electrode configuration in 0.5 M Na₂SO₄ electrolyte by various electrochemical techniques. The specific capacitance of CS/GM/Fe₃O₄/PANI electrode is 1513.4 Fg⁻¹ at 4 Ag⁻¹ which is 1.9 times higher than that of CS/GM/Fe₃O₄ (800 Fg⁻¹). Meanwhile, the electrodes exhibit appropriate cycle life along with 99.8% and 93.95% specific capacitance at 100 Ag⁻¹ for chitosan/GO-CNT/Fe₃O₄ and polyaniline grafted chitosan/GO-CNT/Fe₃O₄, respectively.     

Opacified graphene-doped silica aerogels with controllable thermal conductivity

In this work, we developed a new type of thermal insulation materials by combining the silica aerogel (SiO₂) and graphene (G) followed by aging and supercritical drying. The effects of different G/SiO₂ mass ratios on the microstructures and properties of opacified G/SiO₂-x composite aerogels were investigated. The results showed that the graphene was well-distributed in the SiO₂ matrix. Meanwhile, the opacified composite aerogels showed high-specific surface area (~?1000 m²/g). Due to the unique bandgap feature and conjugated large π bond of graphene, the thermal insulation property of G/SiO₂-x composite aerogels was enhanced in contrast with the pure SiO₂ aerogel. Moreover, a possible mechanism of heat transfer was discussed to interpret the result.     

Preparation and performance of cobalt-doped carbon aerogel for supercapacitor

Carbon aerogels were prepared by polycondensation of resorcinol with formaldehyde in ambient conditions. The effect of resorcinol-to-catalyst ratio (R/C ratio) on volume shrinkage, BET surface area, and electrochemical property was investigated by changing R/C ratio from 50 to 2000. Carbon aerogel prepared at R/C ratio of 500 showed less than 2% of volume shrinkage and the highest BET surface area (706 m²/g). Specific capacitance of carbon aerogel prepared at R/C ratio of 500 was found to be 81 F/g in 1M H₂SO₄ electrolyte. Cobalt-doped carbon aerogels were then prepared by an impregnation method with a variation of cobalt content, and their performance was investigated. Among the samples prepared, 7 wt% cobalt-doped carbon aerogel showed the highest capacitance (100 F/g) and the most stable cyclability. The enhanced capacitance of cobalt-doped carbon aerogel was attributed to the faradaic redox reactions of cobalt oxide.     

Copper substituted nickel ferrite nanoparticles anchored onto the graphene sheets as electrode materials for supercapacitors fabrication

Nickel ferrites with high theoretical capacitance value as compared to the other metal oxides have been applied as electrode material for energy storage devices i.e. batteries and supercapacitors. High tendency towards aggregation and less specific surface area make the metal oxides poor candidate for electrochemical applications. Therefore, the improvements in the electrochemical properties of nickel ferrites (NiFe₂O₄) are required. Here, we report the synthesis of graphene nano-sheets decorated with spherical copper substituted nickel ferrite nanoparticles for supercapacitors electrode fabrication. The copper substituted and unsubstituted NiFe₂O₄ nanoparticles were prepared via wet chemical co-precipitation route. Reduced graphene oxide (rGO) was prepared via well-known Hummer's method. After structural characterization of both ferrite (Ni_1-xCu_xFe₂O₄) nanoparticles and rGO, the ferrite particles were decorated onto the graphene sheets to obtain Ni_1-xCu_xFe₂O₄@rGO nanocomposites. The confirmation of preparation of these nanocomposites was confirmed by scanning electron microscopy (SEM). The electrochemical measurements of nanoparticles and their nanocomposites (Ni_0.9Cu_0.1Fe₂O₄@rGO) confirmed that the nanocomposites due to highly conductive nature and relatively high surface area showed better capacitive behavior as compared to bare nanoparticles. This enhanced electrochemical energy storage properties of nanocomposites were attributed to the graphene and also supported by electrical (I-V) measurements. The cyclic stability experiments results showed ~65% capacitance retention after 1000 cycles. However this retention was enhanced from 65% to 75% for the copper substituted nanoparticles (Ni_0.9Cu_0.1Fe₂O₄) and 65–85% for graphene based composites. All this data suggest that these nanoparticles and their composites can be utilized for supercapacitors electrodes fabrication.     

Anode electrodeposition of 3D mesoporous Fe2O3 nanosheets on carbon fabric for flexible solid-state asymmetric supercapacitor

Novel nanostructured Fe₂O₃ with a network of 3D mesoporous nanosheets was synthesized by depositing on carbon fabric (Fe₂O₃@CF) for use as an anode using a potentially low-cost electrodeposition technique. The electrode with freestanding binder-free Fe₂O₃@CF of high surface area displayed an exceptional specific capacitance of 394.2?F?g^?1. Moreover, a flexible solid-state asymmetric supercapacitor (ASC) was fabricated with a negative electrode based on Fe₂O₃@CF and a positive electrode based on MnO₂@CF in the presence of PVA-LiCl as gel electrolyte. The above ASC exhibited a high operating potential up to 1.8?V, a favorable specific capacitance of 93.5?F?g^?1 (2.92?F?cm^?3), long-term stability (91.3% retention of initial value over 5000 cycles), and remarkable mechanical stability and flexibility, suggesting its potential application for wearable electronics.     

Wrapping mesoporous Fe2O3 nanoparticles by reduced graphene oxide: Enhancement of cycling stability and capacity of lithium ion batteries by mesoscopic engineering

The fast capacity fading at high current density turns out to be one of the key challenges limiting the broad applications of transition metal oxide-based electrodes. Herein, Fe₂O₃ nanoparticles with well-defined mesopores wrapped by reduced graphene oxide (RGO) have been synthesized via a facile hydrothermal strategy. The as-prepared nanocomposites were systematically characterized. XPS and Raman analyses confirm the co-existence of Fe₂O₃ and RGO in the nanocomposite system. SEM and TEM reveal that the mesoporous Fe₂O₃ nanoparticles have a size of 20–60?nm and are uniformly dispersed and tightly wrapped by RGO. When used as the anode in lithium ion batteries, the mesoporous-Fe₂O₃/RGO electrode exhibits excellent cycling stability (1098?mA?h?g^?1 after 500 cycles at 1?A?g^?1) and superior rate capability (574?mA?h?g^?1 at 5?A?g^?1). The excellent electrochemical performance can be mainly ascribed to the unique mesoscopic architecture that serves as a cushion to alleviate volume change of Fe₂O₃ during discharge/charge cycles, provides a sustainably large contact area with the electrolyte, and improves electrical conductivity. This unique nanocomposite electrode holds great potential as an anode material for advanced lithium ion batteries.