RF-MBE生长的高Al势垒层AlGaN/GaN HEMT结构

采用RF-MBE技术,在蓝宝石衬底上生长了高Al组分势垒层AlGaN/GaN HEMT结构.用三晶X射线衍射分析得到AlGaN势垒层的Al组分约为43%,异质结构晶体质量较高,界面比较光滑.变温霍尔测量显示此结构具有良好的电学性能,室温时电子迁移率和电子浓度分别高达1246cm2/(V·s)和1.429×1013cm-2,二者的乘积为1.8×1016V-1·s-1.用此材料研制的器件,直流特性得到了提高,最大漏极输出电流为1.0A/mm,非本征跨导为218mS/mm.结果表明,提高AlGaN势垒层Al的组分有助于提高AlGaN/GaN HEMT结构材料的电学性能和器件性能.     

AlGaN/GaN double-channel HEMT

正The fabrication of AlGaN/GaN double-channel high electron mobility transistors on sapphire substrates is reported.Two carrier channels are formed in an AlGaN/GaN/AlGaN/GaN multilayer structure.The DC performance of the resulting double-channel HEMT shows a wider high transconductance region compared with single-channel HEMT. Simulations provide an explanation for the influence of the double-channel on the high transconductance region.The buffer trap is suggested to be related to the wide region of high transconductance.The RF characteristics are also studied.     

AlGaN/GaN double-channel HEMT

The fabrication of AlGaN/GaN double-channel high electron mobility transistors on sapphire substrates is reported. Two carrier channels are formed in an AlGaN/GaN/AlGaN/GaN multilayer structure. The DC performance of the resulting double-channel HEMT shows a wider high transconductance region compared with single-channel HEMT. Simulations provide an explanation for the influence of the double-channel on the high transconductance region. The buffer trap is suggested to be related to the wide region of high transconductance. The RF characteristics are also studied.     

高击穿电压AlGaN/GaN HEMT电力开关器件研究进展

作为第三代宽禁带半导体材料的典型代表,GaN材料在各个应用领域的研究工作都受到了高度的重视。概述了基于AlGaN/GaN HEMT结构的新型高压、高频、低损耗电力开关器件的最新研究进展。从器件的结构特征入手,详细介绍了改善器件击穿特性的途径、高频开关特性的研究情况、Si衬底上AlGaN/GaN HEMT结构材料的生长、增强型器件的制备技术和功率集成电路的研究等几个国际上的热点问题。最后,对该项研究面临的问题及未来的发展趋势做了展望。     

AlGaN/GaN界面特性研究进展

GaN是一种宽禁带半导体材料,由于具有优越的热稳定性和化学稳定性,使这种材料和与其相关的器件可以工作在高温和恶劣的环境中,并可用于大功率微波器件。本文主要介绍AlGaN/GaN有关界面特性,该特性反映了纵向纳米尺度下的能带特性;从AlGaN/GaNHEMT设计出发,给出了材料性质和结构参数对AlGaN/GaN异质结二维电子气特性影响的研究结果;讨论了AlGaN/GaN界面2DEG载流子的输运性质;分析了材料缺陷对AlGaN/GaN界面2DEG性质的影响;指出了有待研究的问题和方向。     

AlN阻挡层对AlGaN/GaNHEMT器件的影响

利用低压MOCVD技术在蓝宝石衬底上生长了AlGaN/GaN异质结和AlGaN/AlN/GaN异质结二维电子气材料,采用相同器件工艺制造出了AlGaN/GaN HEMT器件和AlGaN/AlN/GaN HEMT器件.通过对两种不同器件的比较和讨论,研究了AlN阻挡层的增加对AlGaN/GaN HEMT器件性能的影响.     

14W X波段AlGaN/GaN HEMT功率MMIC

报道了研制的SiC衬底AIGaN/GaN HEMT微带结构微波功率MMIC,芯片工艺采用凹槽栅场板结构提高AlGaN/GaNHEMTs的微波功率特性.S参数测试结果表明AlGaN/GaN HEMTs的频率特性随器件的工作电压变化显著.研制的该2级功率MMIC在9～11GHz带内30V工作,输出功率大于10W,功率增益大于12dB,带内峰值输出功率达到14.7W,功率增益为13.7dB,功率附加效率为23%,该芯片尺寸仅为2.0mm×1.1mm.与已发表的X波段AlGaN/GaN HEMT功率MMIC研制结果相比,本项工作在单位毫米栅宽输出功率和芯片单位面积输出功率方面具有优势.     

含有Al组分阶变AlGaN过渡层的Si基AlGaN/GaN HEMT

采用一个AlN缓冲层和两个Al组分阶变的AlGaN过渡层作为中间层,在76.2mm Si衬底上外延生长出1.7μm厚无裂纹AlGaN/GaN异质结材料,利用原子力显微镜、X射线衍射、Hall效应测量和CV测量等手段对材料的结构特性和电学性能进行了表征。材料表面平整光滑,晶体质量和电学性能良好,2DEG面密度为1.12×1013cm-2,迁移率为1 208cm2/(V.s)。由该材料研制的栅长为1μm的AlGaN/GaN HEMT器件,电流增益截止频率fT达到10.4GHz,这些结果表明组分阶变AlGaN过渡层技术可用于实现高性能Si基GaN HEMT。     

Monolithically integrated enhancement/depletion-mode AIGaN/GaN HEMT D flip-flop using fluorine plasma treatment

Depletion-mode and enhancement-mode AlGaN/GaN HEMTs using fluorine plasma treatment were integrated on one wafer. Direct-coupled FET logic circuits, such as an E/D HEMT inverter, NAND gate and D flip-flop, were fabricated on an AlGaN/GaN heterostructure. The D flip-flop and NAND gate are demonstrated in a GaN system for the first time. The dual-gate AlGaN/GaN E-HEMT substitutes two single-gate E-HEMTs for simplifying the NAND gate and shrinking the area, integrating with a conventional AlGaN/GaN D-HEMT and demonstrating a NAND gate. E/D-mode D flip-flop was fabricated by integrating the inverters and the NAND gate on the AlGaN/GaN heterostructure. At a supply voltage of 2 V, the E/D inverter shows an output logic swing of 1.7 V, a logic-low noise margin of 0.49 V and a logic-high noise margin of 0.83 V. The NAND gate and D flip-flop showed correct logic function demonstrating promising potential for GaN-based digital ICs.     

F等离子体处理增强型及耗尽型AlGaN/GaN HEMT集成的D触发器

耗尽型和F等离子体处理增强型高电子迁移率晶体管（HEMT）被集成在同一圆片上。增强型/耗尽型 HEMT反向器、与非门以及D触发器等直接耦合场效应晶体管逻辑电路被制作在AlGaN/GaN异质结上。D触发器在GaN体系中首次被实现。在电源电压为2伏的条件下,增强型/耗尽型反向器显示输出逻辑摆幅为1.7伏,逻辑低噪声容限为0.49伏,逻辑高噪声容限为0.83伏。与非门和D触发器的功能正确,证实了GaN基数字电路的发展潜力。     

AlGaN/GaN基HEMT器件的研究进展(英文)

由于AlGaN具有高的击穿电场(3 MV/cm,是GaAs的7.5倍),且在AlGaN/GaN异质结处存在高浓度的极化诱导二维电子气,AlGaN基高电子迁移率晶体管是目前最适合应用于微波大功率放大领域的器件。着重对影响高频大功率AlGaN/GaN性能的材料结构和器件制作进行了阐述。     

微波功率AlGaN/GaN HEMT的研究进展

文章论述了AlGaN/GaN高电子迁移率晶体管(HEMT)在微波功率领域应用的优势,详细介绍了微波功率AlGaN/GaN HEMT的工艺进展以及器件的直流和频率特性,评述了其最新进展及今后发展方向.     

MOCVD-Grown AlGaN Buffer GaN HEMTs With V-Gates for Microwave Power Applications

We report the performance of AlGaN buffer GaN high-electron mobility transistors (HEMTs) grown by metal–organic chemical vapor deposition. GaN HEMTs on high-quality AlGaN buffer were grown on SiC substrates. The incorporation of an AlGaN buffer into the GaN HEMT significantly improves channel confinement and suppresses the short-channel effect. Advanced deep-recess V-gate structures were employed to optimize the device for better microwave power performance. With a 10-nm GaN channel layer sandwiched between the AlGaN barrier and buffer, excellent power performance was achieved. The output power density is 13.1 W/mm, and the associated power-added efficiency is 72% at 4-GHz frequency and 48-V drain bias. This power performance is comparable to the state-of-the-art GaN HEMTs grown on GaN buffers, indicating that the AlGaN buffer in our optimized device structure does not introduce any noticeable trapping.      

Degradation of AlGaN/GaN HEMTs under elevated temperature lifetesting

Elevated temperature lifetesting was performed on 0.25 μm AlGaN/GaN HEMTs grown by MOCVD on 2-in. SiC substrates. A temperature step stress (starting at T_a of 150 °C with a step of 15 °C; ending at T_a of 240 °C; 48 h for each temperature cycle) was employed for the quick reliability evaluation of AlGaN/GaN HEMTs. It was found that the degradation of AlGaN/GaN HEMTs was initiated at ambient temperature of 195 °C. The degradation characteristics consist of a decrease of drain current and transconductance, and an increase of channel-on-resistance. However, there is no noticeable degradation of the gate diode (ideality factor, barrier height, and reverse gate leakage current). The FIB/STEM technique was used to examine the degraded devices. There is no detectable ohmic metal or gate metal interdiffusion into the epitaxial materials. Accordingly, the degradation mechanism of AlGaN/GaN HEMTs under elevated temperature lifetesting differs from that observed in GaAs and/or InP HEMTs. The reliability performance was also compared between two vendors of AlGaN/GaN epilayers. The results indicate that the reliability performance of AlGaN/GaN HEMTs could strongly depend on the material quality of AlGaN/GaN epitaxial layers on SiC substrates.     

高频功率AlGaN/GaN HEMT 的栅结构优化

本文研究了栅帽、栅源间距对AlGaN/GaN HEMT性能的影响。基于研究结果得出了优化高频功率AlGaN/GaN HEMT栅结构的方法。缩小栅场板可以有效提高器件的增益、截止频率（ft）、最大震荡频率（fmax）。通过减小栅场板长度,栅长0.35 器件的ft达到了30GHz、fmax达到了80GHz。采用tao型栅（栅帽偏向源侧）或者增加栅金属厚度还可以进一步优化 。缩小栅源的距离可以提高饱和漏电流和击穿电压,从而提高器件的输出功率。     

毫米波AlGaN / GaN HEMT 交流特性研究

毫米波频段已经成为AlGaN/GaN HEMT研究的一个发展趋势。利用器件仿真软件TCAD,对AlGaN/GaN HEMT交流特性进行了研究。从势垒层的Al组分和厚度两个参数分析了器件特征频率变化趋势。用TCAD仿真得到的AlGaN/GaN HEMT器件本征S参数,在ADS中添加器件的非本征参数,得到器件仿真的频率特性。在器件设计的基础上,进行了器件版图设计和流片,并测量了器件频率特性。测试和仿真结果的对比表明两者较为一致,表明器件仿真的有效性和指导意义。     

Thermal effects in AlGaN/GaN/Si high electron mobility transistors

Group III-nitride compounds are of increasing interest for designing high power and high temperature transistors. A considerable progress in the growth and process technology of these devices has been achieved. However, there are still limitations concerning particularly the lack of native substrates. Comparison of the AlGaN/GaN high electron mobility transistors investigated favours the SiC substrate. Recently, encouraging results have been reported for AlGaN/GaN/Si. The crucial problem found in AlGaN/GaN transistors operating at high biases is the self-heating induced by high power dissipation in the active zone. The present work reports on a study of the self-heating in AlGaN/GaN HEMTs grown on Si(1 1 1). The electron-band parameters of the heterostructures have been calculated self-consistently by taking into account the piezoelectric and spontaneous polarizations. As an experiment support, direct-current characteristics of AlGaN/GaN/Si HEMTs have been used to derive the drain voltage-dependent temperature rise in the conductive channel. As has been found, the self-heating is relatively weak. An improvement in the electron transport is achieved by optimizing the epilayers and adjusting the electrode sizes at output of the transistors investigated.     

Characterization of AlGaN/GaN structures on various substrates grown by radio frequency-plasma assisted molecular beam epitaxy

The structural properties and surface morphology of AlGaN/GaN structures grown on LiGaO₂ (LGO), sapphire, and hydride vapor phase epitaxy (HVPE)-grown GaN templates are compared. AlGaN grown on LGO substrates shows the narrowest x-ray full width at half maximum (FWHM) for both symmetric 〈00.4〉 and asymmetric 〈10.5〉 reflections. Atomic force microscopy (AFM) analysis on AlGaN surfaces on LGO substrates also show the smoothest morphology as determined by grain size and rms roughness. The small lattice mismatch of LGO to nitrides and easily achievable Ga-polarity of the grown films are the primary reasons for the smoother surface of AlGaN/GaN structure on this alternative substrate. Optimizations of growth conditions and substrate preparation results in step flow growth for an AlGaN/GaN structure with 300 Å thick Al_0.25Ga_0.75N on 2.4 μm thick GaN. A high III/V flux ratio during growth and recently improved polishing of LGO substrates aids in promoting two dimensional step flow growth. The GaN nucleation layer directly on the LGO substrate showed no evidence of mixed phase cubic and hexagonal structure that is typically observed in the nucleation buffer on sapphire substrates. Cross-sectional high-resolution transmission electron microscopy (HRTEM) was performed on an AlGaN/GaN heterostructure grown on LGO. The atomic arrangement at the AlGaN/GaN interface was sharp and regular, with locally observed monolayer and bilayer steps.     

PI/Cr钝化对提高AlGaN/GaN HEMTs 击穿电压的研究

A novel AlGaN/GaN high electric mobility transistor（HEMT） with polyimide（PI）/chromium（Cr） as thepassivationlayerisproposedforenhancingbreakdownvoltageanditsDCperformanceisalsoinvestigated.The Cr nanoparticles firstly introduced in PI thin films by the co-evaporation can be used to increase the permittivity of PI film. The high-permittivity PI/Cr passivation acting as field plate can suppress the fringing electric field peak at the drain-side edge of the gate electrode. This mechanism is demonstrated in accord with measured results. The experimental results show that in comparison with the AlGaN/GaN HEMTs without passivation, the breakdown voltage of HEMTs with the PI/Cr composite thin films can be significantly improved, from 122 to 248 V.     

Improved temperature model of AlGaN/GaN HEMT and device characteristics at variant temperature

In this paper, an improved temperature model for AlGaN/GaN high electron mobility transistor (HEMT) is presented. Research is being conducted for a high-performance building block for high frequency applications that combine lower costs with improved performance and manufacturability. The effects of channel conductance in the saturation region and the parasitic resistance due to the undoped GaN buffer layer have been included. The effect of both spontaneous and piezoelectric polarization induced charges at the AlGaN/GaN heterointerface has been incorporated. The proposed model is used to determine the transfer characteristics, output current-voltage characteristics and small-signal microwave parameters of HEMTs. The investigated temperature range is from 100–600 K. The small signal microwave parameters have been evaluated to determine the unity current gain cut-off frequency (f _T ). High f _T (10–70 GHz) values and high current levels (～550 mA/mm) are achieved for a 1 μm AlGaN/GaN HEMTs. A custom DC measurement system is used to facilitate the DC characterization of the unpackaged GaN HEMT test device. The calculated critical parameters and the simulation results suggest that the performance of the proposed device degrades at elevated temperatures.