3-Oxo-1,2-benzoisothiazoline-2-acetic acid 1,1-dioxide derivatives. II. Reaction of amides with alkoxides

Reaction of some 3-oxo-1,2-benzoisothiazoline-2-acetamide 1,1-dioxides ( 1a-f ) with alkaline alkoxides was carried out under various conditions. Under mild conditions, 1a-f with sodium methoxide gave o-(N-carbox-amidomethylsulfamyl)benzoic acid methyl esters ( 2a-f, R = CH3 ). Compounds 1a or 2a reacted with sodium alkoxides under drastic conditions affording only ester 5 . Under the same conditions, 1b-d or 2b-d gave 4-hydroxy-2H-1,2-benzothiazine-3-carboxamide 1,1-dioxides ( 3b-d ), while 1e-f or 2e-f afforded the acid 6 in variable amounts, together with the expected benzothiazines 3e-f . Isolation of ethyl ether as another product in the reaction of 1e-f with sodium ethoxide supports the suggestion that the formation of 6 involves the O-alkyl fission on the alkyl carbon of the esters 2e-f . An explanation of these results may be related to the acidic character of the amide hydrogen in compounds 2e-f .     

2-乙氧羰基-3-甲基-4,5-四亚甲基吡咯的合成

以乙酰乙酸乙酯(1)为原料,在醋酸中与亚硝酸钠通过肟化反应制得N-羟基亚胺乙酰乙酸乙酯(2);2在醋酸缓冲溶液中经锌粉还原后与环己酮加成环化合成了2-乙氧羰基-3-甲基-4,5-四亚甲基吡咯(3),其结构经1H NMR,IR和元素分析表征。较适宜的反应条件为:1100 mmol,n(Zn)∶n(1)=2.9∶1.0,在醋酸中回流反应,总收率39%;以多步反应的最佳反应条件进行"一锅煮"合成3,收率50%。     

合成双酚AF的新方法

由六氟丙酮三水合物和苯胺,经缩合、重氮化、水解、Friedel-Crafts烷基化等4步反应在常压下合成了双酚 AF。首先,以五氧化二铌为催化剂,在 n (HFA•3H₂O) : n (aniline) : n (Nb₂O₅) = 2 : 1 : 0.1,回流 6 h 条件下,合成出中间体（Ⅰ）,收率高达96.3%。然后在重氮化温度为 ﹣2 ～ 2 ℃,硫酸质量分数为 14.7%,n (Ⅰ) : n (H₂SO₄) : n (NaNO₂) = 1 : 4.1 : 1.1,及水解时硫酸质量分数为 50%,n (H₂SO₄) : n (Ⅰ) = 11.0 : 1、108～112 ℃反应 1.5 ～ 2 h 的优化条件下,化合物Ⅰ经重氮化、水解后以 92.7%的高收率得到中间体 2-（4-羟基苯）六氟异丙醇（Ⅱ）;再在甲磺酸存在下,化合物Ⅱ与苯酚经Friedel-Crafts烷基化反应以 72.4% 的收率合成了目标产物双酚 AF（Ⅲ）,总收率为 64.6%（以苯胺为基准计算）。     

3-取代胺甲基-5-连三唑基-1, 3, 4-恶二唑-2-硫酮的合成

2-苯基-1,2,3-三唑-4-甲酰肼(1)在CS~2/KOH作用下环化得到5-(2-苯基-1,2,3-连三唑-4-基)-1,3,4-恶二唑-2-硫酮(2),2经Mannich反应合成得到标题化合物3-(取代胺甲基-5-(2-苯基-1,2,3-连三唑-4-基)-1,3,4-恶二唑-2-硫酮(3)。     

Substituted Quinolinones. Part 19. New and Unexpected Results from Oxidation of 3-Acetyl-1-Alkyl- 4-Hydroxyquinolin-2(1H)-Ones Using Selenium Dioxide

Abstract

Oxidation of 3-acetyl-1-alkyl-4-hydroxyquinolin-2(1H)-ones using selenium dioxide under Riley conditions was described. The oxidation reaction produced a mixture of 2 unexpected α-keto acid and its dehydrated dimer derivatives. The oxidation reaction was studied under different reaction conditions in order to maximize the yields and optimize reaction conditions. Also, 1-alkyl-4-hydroxy-3-(2-nitroacetyl)quinolin-2(1H)-one and/or 3-acetyl-1-alkyl-4-diflouro-boryloxyquinolin-2(1H)-one derivatives were subjected to the same oxidation reaction giving rise improved reaction yields and selectivity in case of the boron-complex. Alkaline degradation of the dehydrated dimers led to formation of the 4-hydroxy-2-oxoquinoline-3-carboxylic acids while under the same conditions the α-keto acids underwent deoxalylation.

[Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the following free supplemental files: Additional figures].     

Monomer-isomerization polymerization. XIX. Monomer-isomerization copolymerizations of methylbutenes and 2-butene with Ziegler-Natta catalyst

The copolymerization of 3-methyl-1-butene (3M1B), 2-methyl-2-butene (2M2B), or 2-methyl-1-butene (2M1B) with trans-2-butene (2B) was attempted in the presence of a Ziegler-Natta catalyst. It was found the 3M1B underwent monomer-isomerization copolymerization with 2B to give a copolymer consisting of both 3M1B and 1-butene (1B) units, with an infrared (IR) spectrum in good agreement with that obtained from the copolymerization of 3M1B with 1B under similar conditions. When the apparent copolymerization parameters obtained by a TiCl₃–(C₂H₅)₃Al catalyst were compared, the apparent reactivity of 3M1B observed in the 3M1B-2B system was much higher than that in the 3M1B-1B system. However, 2M2B and 2M1B did not undergo monomer-isomerization copolymerization with 2B, and only the homopolymer of 1B was obtained under similar conditions.     

Suzuki-Miyaura coupling reaction using pentafluorophenylboronic acid

[reaction: see text] We have found new conditions for the Suzuki-Miyaura coupling reaction applicable to pentafluorophenylboronic acid (C(6)F(5)B(OH)(2)) (1), which is an inactive substrate under normal conditions. The reactions of 1 with phenyl iodide or bromide under Pd(PPh(3))(4)/CsF/Ag(2)O or Pd(2)(dba)(3)/P(t-Bu)(3)/CsF/Ag(2)O catalytic system conditions gave 2,3,4,5,6-pentafluoro-1,1'-biphenyl (3a) in more than 90% yields. Combination of CsF and Ag(2)O was essential for promoting these reactions.     

Silver(I) complexes with oxazoline-containing tripodal ligands: structure variation via counter anions and reaction conditions

Seven new silver(I) complexes of the formula [Ag2(L)2(CF3SO3)2] (1), [Ag2(L)2(CH3SO3)2] (2) [Ag2(L)2](BF4)2 (3), [Ag3(L)2(NO3)2]NO3.5H2O (4), [Ag2(L)(NO3)2].CH3OH (5), [Ag2(L)2](ClO4)2 (6) and [Ag3(L)2(CH3CN)3](ClO4)3 (7) have been synthesized by reactions of 1,3,5-tris(2-oxazolinyl)benzene (L) with varied silver(I) salts under different conditions. The influences of counter anions and reaction conditions on the structure of the complexes are discussed. Three complexes , 1, 2 and 3 with two kinds of different 1D chain structures were obtained under the same synthetic conditions by using different silver(I) salts, and the ligand L was found to adopt bis-monodentate (1 and 2) and tris-monodentate (3) coordination modes respectively. On the other hand, by using the same silver(I) nitrate or silver(I) perchlorate but different reaction solvents, 4 and 5 or 6 and 7 were isolated respectively. Complexes 4and 5 have different 1D chain structures, and 6 is isostructural with . However, 7 is a tri-nuclear, propeller-shaped M3L2 supramolecular capsule in which L adopts a cis,cis,cis-conformation, while the ligand L in 3-6 has cis,trans,trans-conformation. The results revealed that the nature of the counter anions, such as their size, coordination ability and coordination mode, and the reaction conditions all have great impact on the structure of the complexes. The complexes were also characterized by electrospray mass spectrometry. Furthermore, complex 7 exhibited modest second-harmonic-generation (SHG) efficiency.     

3-(Dimethylboryl)pyridine: synthesis, structure, and remarkable steric effects in scrambling reactions

A facile method for the synthesis of 3-(dimethylboryl)pyridine (1a) is described. Compound 1a assembles into a rigid cyclic tetramer stabilized via intermolecular boron-nitrogen coordination bonds both in the crystalline state and in solution. The outstanding structural feature of 1a, as compared with previously reported 3-(diethylboryl)pyridine (2a) (which adopts a cone conformation), is that the tetramer of 1a adopts a 1,2-alternate conformation. To investigate the effect of substituents at the boron atom on the stabilities of the oligomers, scrambling experiments of the component molecules using 1, 2, and 3-(di-n-butylboryl)pyridines 3 were carried out. Although heating at 80-90 degrees C for 20 h was required to attain the equilibrium of the scrambling reactions when the component molecules of the tetramers were 2 or 3, the scrambling in 1 proceeded under relatively mild conditions (60 degrees C, 3 h). This difference in reaction conditions required for 1, as compared to conditions required for 2 or 3, could not be explained solely by the stabilities based on bond lengths or THC. It appears that whereas only an S(N)1-type pathway may be involved in the scrambling of 2 or 3, both S(N)1- and S(N)2-type mechanisms operate simultaneously during scrambling reactions of 1 or an intermediate mechanism between S(N)1 and S(N)2 operates, which was supported by kinetic studies and calculations using model compounds.     

微波辐射下2-[4-二-(4-氟苯)甲基]哌嗪乙酰腙化合物的合成

微波辐射条件下, 以丙酮作溶剂, 1-[二-(4-氟苯)甲基]哌嗪与氯乙酸乙酯反应得到2-[二-(4-氟苯)甲基]哌嗪乙酸乙酯(1), 1与水合肼在微波辐射条件下反应得到2-[二-(4-氟苯)甲基]哌嗪乙酰肼(2), 进一步在微波辐射条件下由2-[二- (4-氟苯)甲基]哌嗪乙酰肼(2)与取代芳香醛反应制得目标化合物3a～3f. 合成的6个目标化合物通过熔点测定和质谱、红外光谱、核磁共振氢谱分析、元素分析对其结构进行确证.     

Controlled copper-mediated chlorination of phenol rings under mild conditions

The very unusual case of copper-mediated chlorination of phenol rings under mild conditions at room temperature is reported. Reaction of the ligand 1,7-bis(2-hydroxyphenyl)-2,6-diaza-4-hydroxylheptane (H3L1) with CuCl2 in acetonitrile leads to either the formation of a tetranuclear copper(II) complex [Cu4(HL3)2(mu-Cl)2Cl2](CH3CN) (1) or a linear trinuclear complex [Cu3(HL1)2Cl2(CH3CN)2](CH3CN)2 (2), depending on the reaction conditions. Both compounds have been fully characterized, including the determination of their 3D structures by X-ray diffraction. The unprecedented tetranuclear compound 1 is constituted of a dichlorido-bridged dimer of di-mu-phenoxido-dinuclear species, whereas the trinuclear complex 2 presents a linear array of copper(II) ions, held together through di-mu-phenoxido bridges of the central and external ions. The magnetic susceptibility of the two compounds was investigated, revealing either very strong (J<-500 cm-1) or strong (J value around -370(1) cm-1) antiferromagnetic dominant interactions among the CuII ions for 1 and 2, respectively. The tetranuclear complex 1 is obtained, under dry conditions, through the in situ formation of ligand HL3 (H3L3=1,7-bis(2-hydroxy-5-chlorophenyl)-2,6-diaza-4-hydroxylheptane) by oxidative chlorination of (HL1)2-. In the presence of traces of water, 1 is partially hydroxylated at the ortho position of one of the phenyl rings. The use of trimethylorthoformate as the dehydrating agent prevents the formation of hydroxylated ligands. Several partly chlorinated/hydroxylated products (identified as H3L2) have also been obtained through slight variations of the synthetic procedures (presence or absence of water and/or triethylamine in the reaction mixtures). These partially chlorinated and/or hydroxylated coordination species are mutually isomorphous to either 1 or 2. Several "modified" ligands have been isolated and characterized by 1H NMR and MS, after reaction with sodium sulfide of the complexes formed.     

Thermische Umlagerung von (trans-2,3-Diphenylcyclopropyl)-dipyrrolidino-methan. vorläufige Mitteilung

Thermal rearrangement of (trans-2,3-diphenylcyclopropyl)-dipyrrolidino-methane under different conditions leads to mixtures which, after mildly acid work up, yield 2-benzylidene-1-pyrrolidino-indane ( 3 ) and 2-benzyl-indan-1-one ( 4 ) in strongly varying proportions. Under one of these conditions 4 is obtained from 3 .     

Chemoselective amination of 5-bromo-2-chloro-3-fluoropyridine

The chemoselective functionalization of 5-bromo-2-chloro-3-fluoropyridine (1c) is described. Catalytic amination conditions (Pd2dba3, Xantphos, base) afford exclusively the bromide substitution product (2) for both secondary amines and primary anilines. A reversal in chemoselectivity is observed under neat conditions in the absence of palladium catalysis, with substitution at the 2-chloro position preferred to generate 3. Last, selective substitution of the 3-fluoro group is achieved under SNAr conditions to afford the dihalo adduct (4).     

A simultaneous reduction, substitution, and self-assembly reaction under hydrothermal conditions afforded the first diiodopyridine copper(I) coordination polymer

A simultaneous reduction of copper(II) to copper(I) by pyridinecarboxylate and the substitution of carboxylato groups by iodo nucleophiles in a self-assembly process under hydrothermal conditions afforded a new iodine-inclusion coordination polymer [CuI(C5H3NI2)*1/2I2] 1. The synthetic studies of the substitution process produced a new supramolecular compound [IC5H3NCOOH] 2 and revealed that the catalytic properties of copper ions in redox and substitution reactions under hydrothermal conditions are attractive. Crystal data for [CuI(C5H3NI2)*1/2I2]: triclinic, space group P1; cell dimensions a = 4.216(1) A, b = 11.254(2) A, c = 12.196(2) A, alpha = 80.34(3) degrees, beta = 88.44(3) degrees, gamma = 83.10(3); V = 566.2(2) A(3), Z = 2. Crystal data for [IC(5)H(3)NCOOH]: monoclinic, space group P2(1)/c; cell dimensions a = 5.041(1) A, b = 17.313(2) A, c = 8.639(1) A, beta = 95.042(2) degrees; V = 751.02(13) A(3), Z = 4.     

Solvent-free Al(OTf)3-catalyzed aminolysis of 1,2-epoxides by 2-picolylamine: a key step in the synthesis of ionic liquids

Beta-Amino alcohols N-2'-pyridylmethyl substituted 3 have been prepared in excellent yields under mild conditions by the first Lewis acid-catalyzed aminolysis of 1,2-epoxides 1 with the bihaptic amine 2-picolylamine (2) with use of 5 mol % of Al(OTf)(3) under solvent-free conditions. As a representative of a new class of ionic liquids, cis-5-[(4'-methylphenyl)sulfonyl]-1,2,3,4,4a,5,6,11a-octahydropyrido[1,2-a]quinoxalin-11-ium methanesulfonate (6) and its chloride derivative 7 have been synthesized under environmentally friendly conditions by the one-pot aminolysis of cyclohexene oxide (1a) with 2 and intramolecular cyclization of the resulting 2-[(pyridin-2'-yl)methylamino]cyclohexanol (3a).     

Diketo compounds with (trifluoromethyl)trimethylsilane: double nucleophilic trifluoromethylation reactions

Reactions of various diketo compounds with (trifluoromethyl)trimethylsilane (Me3SiCF3) in the presence of catalytic amounts of cesium fluoride have been studied. gamma-Ketoesters, CH3COCH2CH2CO2R (R = Et, Bu), were reacted with 2 equiv of Me3SiCF3 at room temperature to give CH3C(OH)(CF3)CH2CH2COCF3 in good yield after hydrolysis. alpha-Diketones, R1COCOR2 (R1 = R2 = Ph; R1 = Ph, R2 = Me; R1 = R2 = Me; R1 = Me, R2 = Et), when reacted with Me3SiCF3, formed 1:1 or 1:2 addition products depending on the reaction conditions and stoichiometry used. Reactions of diones CH3COXCOCH3 (X = -CH2CH2-, -C6H4C6H4-, -CH2-) with Me3SiCF3 also led to the formation of the mono- or diaddition products depending on reaction conditions. With various kinds of substituted arylglyoxals, 2 equiv of Me3SiCF3 produced monoaddition products in 70-75% yield and diaddition products in 5-10% yield. One of the monoalcohols and two of the diols have been characterized by single-crystal X-ray analysis, and the presence of inter- and intramolecular hydrogen bonding has been confirmed.     

Synthesis and dehydrocoupling reactivity of iron and ruthenium phosphine-borane complexes

The Fe and Ru phosphine-borane complexes CpM(CO)2PPh2 x BH3 (1, M = Fe, 4, M = Ru) were synthesized utilizing the reaction of the phosphine-borane anion Li[PPh2 x BH3] with the iodo complexes CpM(CO)2I. The Fe complex 1 reacted with PMe3 to yield CpFe(CO)(PMe3)(PPh2 x BH3) (2) and CpFe(PMe3)2(PPh2 x BH3) (3) whereas the Ru species 4 gave only CpRu(CO)(PMe3)(PPh2 x BH3) (5). The complexes 1-5 were characterized by 1H, 11B, 13C and 31P NMR spectroscopy, MS, IR and X-ray crystallography for 1 to 4, and EA for 1, 2 and 4. The reactivity of 1 and 4 towards PPh2H x BH3 was explored. Although no stoichiometric reactions were detected under mild conditions, both 1 and 4 were found to function as dehydrocoupling catalysts to afford Ph2PH x BH2 x PPh2 x BH3 in the melt at elevated temperature (120 degrees C). The carbonyl Fe2(CO)9 also functioned as a dehydrocoupling catalyst under similar conditions. Complex 1 and Fe2(CO)9 represent the first reported active Fe complexes for the catalytic dehydrocoupling of phosphine-borane adducts.     

Efficient oxidizing methods for the synthesis of oxandrolone intermediates

Mild, efficient and eco-friendly oxidation of 17alpha-methylandrostan-3beta-17beta-diol (1) has been studied with three different reagents viz. pentavalent iodine reagent 2-iodoxy benzoic acid (IBX) in DMSO at 65 degrees C, sodium hypochlorite and H2O2/Na2WO4 under phase transfer conditions to give 17beta-hydroxy-17alpha-methylandrostan-3-one (mestanolone 2), a drug intermediate as oxidized product. The H2O2/Na2WO4/PTC gave mestanolone in high yield and purity whereas sodium hypochlorite/PTC system yielded some chlorinated material along with the mestanolone. However, 1 with 2.5 equivalent of IBX gave 17beta-hydroxy-17alpha-methyl-Delta1-androsten-3-one (3) under the similar reaction conditions in good yield and single step reaction.     

(3-Hydroxy-3-methylbutyn-1-yl)cycloalkan-1-ols in the Ritter Reaction

(3-Hydroxy-3-methylbutyn-1-yl)cycloalkan-1-ols were prepared by the action of (2-lithiooxy-2-methylbutyn-3-yl)lithium on cyclopentanone, cyclohexanone, cycloheptanone, and cyclododecanone. The products react with acetonitrile under Ritter reaction conditions. Therewith, in the presence of 8 g-equiv of sulfuric acid, a 2:1 mixture of 1-acetylamino-1-(2-acetylamino-2-methylbutyn-3-yl)cycloalkanes and 1-acetylamino-1-(3-acetylamino-3-methylbutyryl)cycloalkanes is formed, whereas in the presence of 2 g-equiv of the acid, a mixture of 1-acetylamino-1-(2-acetylamino-2-methylbutyn-3-yl)cycloalkanes and 1-acetylamino-1-(3-methyl-2-butenoyl)cycloalkanes in the same ratio.     

MMT/FeCl_3催化的α-羰基二硫缩烯酮与二苯甲醇的Friedel-Crafts烷基化反应

研究了MMT/FeCl_3催化α-羰基二硫缩烯酮与二苯甲醇的Friedel-Crafts烷基化反应,合成了22个二硫缩烯酮类化合物(3a~3v),其中3b,3d~3f,3h~3r和3t为新化合物,其结构经1H NMR和13C NMR表征。以3a的合成为例,对反应条件进行优化。结果表明:在最优反应条件[1-(1,3-二噻烷-2-亚甲基)-4-苯基-3-丁烯-2-酮(1a)0.25 mmol,二苯甲醇0.3 mmol,MMT/FeCl_315 mmol%,CH_2Cl_22 m L,回流反应2 h]下,3a产率93%;MMT/FeCl_3循环使用3次,收率基本维持不变。