Thermal characterization of titania-modified alumina-supported palladium and catalytic properties for methane combustion

Thermal characterization of Pd/TiO₂-Al₂O₃ catalysts under oxygen or hydrogen atmosphere was investigated by means of thermogravimetry (TG), differential scanning calorimetry (DSC), temperature programmed reduction (TPR) and temperature programmed desorption (TPD). Further, the effects of titania on the catalytic property of Pd/Al₂O₃ towards methane combustion were also examined. A TG-DSC studies revealed that the heat evolved during oxygen adsorption at 25 °C depended on the crystallite diameter. TPR and TPD studies of oxidized samples also demonstrated that the coating of Pd/Al₂O₃ catalysts with titania can weaken the strength of the PdO bonds. Apparently the effect of coating Pd/Al₂O₃ catalyst with TiO₂ is the improvement of the methane combustion at lower temperatures. This is probably due to the decrease of the strength of the PdO bonds.     

Photodegradation of Rhodamine B on Sulfur Doped ZnO/TiO2 Nanocomposite Photocatalyst under Visible-light Irradiation

Sulfur doped ZnO/TiO₂ nanocomposite photocatalysts were synthesized by a facile sol‐gel method. The structure and properties of catalysts were characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), UV‐vis diffusive reflectance spectroscopy (DRS) and N₂ desorption‐adsorption isotherm. The XRD study showed that TiO₂ was anatase phase and there was no obvious difference in crystal composition of various S‐ZnO/TiO₂. The XPS study showed that the Zn element exists as ZnO and S atoms form SO^2?₄. The prepared samples had mesoporosity revealed by N₂ desorption‐adsorption isotherm result. The degradation of Rhodamine B dye under visible light irradiation was chosen as probe reaction to evaluate the photocatalytic activity of the ZnO/TiO₂ nanocomposite. The commercial TiO₂ photocatalyst (Degussa P25) was taken as standard photocatalyst to contrast the prepared different photocatalyst in current work. The improvement of the photocatalytic activity of S‐ZnO/TiO₂ composite photocatalyst can be attributed to the suitable energetic positions between ZnO and TiO₂, the acidity site caused by sulfur doping and the enlargement of the specific area. S‐3.0ZnO/TiO₂ exhibited the highest photocatalytic activity under visible light irradiation after Zn amount was optimized, which was 2.6 times higher than P25.     

Lithium adsorption on TiO2: studies with electron spectroscopies (MIES and UPS)

The adsorption of lithium atoms on rutile TiO₂(110) single crystals was studied with metastable‐induced electron spectroscopy (MIES) and ultraviolet photoelectron spectroscopy (UPS(HeI)) between 130 K and room temperature. Some auxiliary measurements on W(110) required for data interpretation are also reported. At 130 K ionic adsorption at titania prevails up to 0.3 monolayer equivalents (MLE) as judged from the weak Li(2s) emission in MIES for these exposures. The reduction of the Ti⁴⁺ cation is manifested by the growth of an occupied bandgap state in UPS: the alkali s‐electron is transferred to a near‐surface cation, thereby reducing it to Ti³⁺ 3d. The transfer of the s‐electron is responsible for the observed work function decrease up to ～0.5 MLE coverage. From the analysis of the UPS Ti³⁺ 3d signal, as well as from the Li(2s) emission, it is concluded that the degree of ionicity of the adsorbed Li decreases from 100% at 0.3 MLE to 40% at 0.7 MLE. Above 0.5 MLE the MIES spectra are dominated by an Li(2s)‐induced peak indicating the presence of Li with an at least partially filled 2s orbital. At temperatures above 160 K this peak is almost absent. Excluding Li desorption at these temperatures, we suggest that Li moves into or below the rutile TiO₂(110) surface above 160 K. Lithium insertion into the surface and intercalation are discussed. Copyright © 2004 John Wiley & Sons, Ltd.     

超声波制备介孔结构的氮掺杂TiO2纳米晶及其可见光催化性能

采用超声波辐射法制备了具有介孔结构的高浓度氮掺杂TiO₂纳米晶(N/TiO₂).采用N₂物理吸附、X射线粉末衍射、X射线光电子能谱、透射电镜、光致发光谱和紫外-可见漫反射光谱等手段对N/TiO₂进行了表征.以波长为400~660nm的可见光为光源,以水体污染物邻苯二甲酸二甲酯为降解对象,考察了不同制备方法对N/TiO₂光催化性能的影响.结果表明,超声波辐射使氮掺杂浓度提高了2.2倍,该法制备的N/TiO₂同时具有较好的介孔结构,表现了更高的光催化降解邻苯二甲酸二甲酯的活性.其活性提高的主要原因是N/TiO₂含有更高浓度的氮和对可见光具有更强的吸收能力.     

TPD study of NH3 adsorption/desorption on the surface of V/Ti, V/Al based catalysts for selective catalytic reduction of NOx by ammonia 1. TPD test of γ-Al2O3, TiO2 (anatase) and alumina-supported vanadia catalysts

The effect of temperature on the adsorption/desorption of ammonia from the air mixture on the surface of γ-Al₂O₃, TiO₂ (anatase) and alumina-supported vanadia catalyst samples has been investigated using temperature-programmed desorption (TPD). When the vanadia loading was increased, the fraction of the acid sites providing the NH₃ adsorption in the high-temperature state decreased. At the same time, the fraction of the medium temperature state significantly increased.     

TSEE-OSEE properties of some BeO/graphite detectors for dosimetric purposes

Experiments in the field of Thermally Stimulated Exoelectron Emission (TSEE) regarding the BeO/graphite (BUG) detector's responses to , and neutron radiations, annealing, and optimization of the heating program related to retrapping processes, were performed. Optical Stimulated Exoelectron Emission (OSEE) measurements were made at various wavelengths and the variations explained in connection with literature data.     

Density functional study on the sensing properties of nano-sized BeO tube toward H2S

Using density functional calculations, we have investigated the adsorption of a H₂S molecule on the pristine and Si-doped BeO nanotubes (BeONT). It was found that the H₂S molecule is physically adsorbed on the pristine BeONT with adsorption energies ranging from 3.0 to 4.2 kcal/mol. Substituting a Be or O atom of the tube by Si increases the adsorption energy to 6.9–17.2 kcal/mol. We found that substituting an O atom by Si makes the electronic properties of the BeONT strongly sensitive to the H₂S molecule. Therefore, the process of Si doping provides a good strategy for improving the sensitivity of BeONT to toxic H₂S, which cannot be trapped and detected by the pristine BeONT. Also, the emitted electron current density from the Si_O–BeONT will be significantly increased after the H₂S adsorption.     

Adsorption factor and photocatalytic degradation of dye-constituent aromatics on the surface of TiO2 in the presence of phosphate anions

The photocatalytic degradation for some kinds of dye-constituent aromatics with TiO₂ in the presence of phosphate anions in aqueous dispersion was investigated under both visible light (λ>480 nm) and UV irradiation. The influences of phosphate anion upon the degradation of organics under these different conditions was revealed by the measurement of point of zero ξ-potential (P _ZC) of TiO₂, UV-VIS spectra, HPLC and LC-MS. The adsorption and photodegradation of some organics, which adsorb on the surface of TiO₂ by a dominating group bearing a positive charge, was enhanced, while that of others, which adsorb on the surface of TiO₂ by a dominating group bearing negative charge, was depressed by the presence of phosphate anions under UV irradiation at the experimental conditions (pH 4.3). It was confirmed that better adsorption of organics on the surface of TiO₂ had an advantage in their photocatalytic degradation under UV irradiation. On the other hand, although the adsorption of rhodamine B (RhB) and methylene Blue (MB) markedly increased, their degradation under visible light irradiation was depressed in the presence of phosphate anions. It is suggested that phosphate anion greatly blocked the electron transfer from excited RhB and MB molecules as RhB and MB molecules predominantly adsorbed on the surface of TiO₂ through the electrostatic interaction with surface adsorbed phosphate anions.     

Effect of Li and Na impurities on the electronic and magnetic properties of beryllium oxide

The ab initio pseudopotential method (VASP package) within the gradient approximation (GGA) for the exchange-correlation potential is used to study the effect of Li and Na substitution for Be atoms on the electronic and magnetic properties of wurtzite-like beryllium monoxide BeO with an impurity concentration of 0.028. When Li impurity is introduced into BeO, the system is found to remain nonmagnetic. At the same time, the BeO:Na system adopts magnetic moments (~0.8 fu_B per cell) through the spin polarization of the 2p-state of oxygen atoms surrounding the impurity center. After lithium incorporation into BeO, the spectrum of BeO:Li becomes metal-like, while the introduction of sodium results in the magnetic semimetal type of the BeO:Na spectrum     

Visible light photodegradation of rhodamine B over VDF/CTFE copolymer-templated crystalline mesoporous titania

Mesoporous TiO₂ with anatase crystalline structure (MTiO₂/F₂₃₁₉) has been synthesized by using vinylidene fluoride/chlorotrifluoroethylene copolymer (1:9 in mole, F₂₃₁₉) as template. The synthesized mesoporous titania samples were characterized by a combination of various physicochemical techniques, such as X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, and N₂ adsorption/desorption. It was found that without any external doping, MTiO₂/F₂₃₁₉ exhibited significantly higher photocatalytic activities for the degradation of rhodamine B (RhB) dye than P25 TiO₂ under visible light irradiation. Furthermore, the UV-Vis absorption maximum of the dye solution exhibited a gradual hypsochromic shift due to de-ethylation and degradation of RhB dye.     

钯氮共掺杂TiO2的制备与表征及其可见光催化活性

在空气气氛和N₂中热处理表面均匀分散有尿素和氯化钯的纳米管钛酸,制备了两个系列Pd/N共掺杂的TiO₂光催化剂,并对所得样品进行了X射线衍射、透射电镜、X射线光电子能谱、紫外-可见漫反射光谱、荧光光谱和电子自旋共振等表征.结果表明,焙烧气氛对样品的形貌、晶体结构、光谱吸收、生成的氧空位浓度和可见光光催化性能的影响很大,其中在空气气氛中制备的样品光催化性能优于在N₂中制备的样品.在可见光(λ≥420nm)照射下,以丙烯为模型污染物考察了样品的光催化活性,发现在空气中400℃下焙烧的样品具有最佳的可见光催化活性.另外,讨论了Pd/N共掺杂TiO₂光催化剂具有可见光响应的机理,认为掺杂的Pd/N元素和制备过程中生成的氧空位是影响可见光催化性能的重要因素.     

An influence of pretreatment conditions on surface structure and reactivity of Pt(100) towards CO oxidation reaction

We present a combined electrochemical and in situ STM study of the surface structure of Pt(100) single crystal electrodes in dependence on the cooling atmosphere after flame annealing. The following cooling conditions were applied: Ar/H₂ and Ar/CO mixtures (reductive atmosphere), argon (inert gas) and air (oxidative atmosphere). Surface characterization by in-situ STM allows deriving direct correlations between surface structure and macroscopic electrochemical behavior of the respective platinum electrodes. We investigated the influence of defect type and density as well as long range surface order on the kinetics of the CO electro-oxidation reaction. The defect-rich Pt(100) electrodes as cooled in air or Ar, and followed by immersion in the hydrogen adsorption region display higher activities as compared to the rather smooth Pt(100)-(1 × 1) electrode cooled in an Ar/H₂-atmosphere.     

光驱动多孔无定形TiO2的形成机制与光催化性能的研究

以钛酸正丁醇和乙二醇为原料,采用溶剂热法合成了钛乙二醇盐(TG)前躯体,在高压汞灯照射下制备出无定形TiO2。利用X射线衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)、紫外-可见吸收光谱(UV-Vis)、表面光电压谱(SPS)、N2吸附-脱附对所得材料进行了结构和性能的表征。借助X射线吸收精细结构(XAFS)对无定形TiO2的形成机制进行了分析,并通过硝基苯的还原反应考察了材料的光催化性能。结果表明:在紫外光驱动无定形TiO2的形成过程中,中心元素Ti4+的配位环境发生变化,由八面体结构转变为四面体结构;由于特殊的孔道结构使得多孔无定形TiO2显示出较好的光催化活性。     

Molecular Simulation on Competitive Adsorption Differences of Gas with Different Pore Sizes in Coal

Micropores are the primary sites for methane occurrence in coal. Studying the regularity of methane occurrence in micropores is significant for targeted displacement and other yield-increasing measures in the future. This study used simplified graphene sheets as pore walls to construct coal-structural models with pore sizes of 1 nm, 2 nm, and 4 nm. Based on the Grand Canonical Monte Carlo (GCMC) and molecular dynamics theory, we simulated the adsorption characteristics of methane in pores of different sizes. The results showed that the adsorption capacity was positively correlated with the pore size for pure gas adsorption. The adsorption capacity increased with pressure and pore size for competitive adsorption of binary mixtures in pores. As the average isosteric heat decreased, the interaction between the gas and the pore wall weakened, and the desorption amount of CH₄ decreased. In ultramicropores, the high concentration of CO₂ (50–70%) is more conducive to CH₄ desorption; however, when the CO₂ concentration is greater than 70%, the corresponding CH₄ adsorption amount is meager, and the selected adsorption coefficient S_CO2/CH4 is small. Therefore, to achieve effective desorption of methane in coal micropores, relatively low pressure (4–6 MPa) and a relatively low CO₂ concentration (50–70%) should be selected in the process of increasing methane production by CO₂ injection in later stages. These research results provide theoretical support for gas injection to promote CH₄ desorption in coal pores and to increase yield.     

Synthesis,Characterization, and Photocatalytic Properties of Ag/TiO2 Composite Nanofibers Prepared by Electrospinning

Ag nanoparticles (Ag NPs) embedded titanium dioxide (TiO₂) nanofibers were fabricated by colloidal sol process, electrospinning, and calcination technique. Calcination of the electrospun nanofibers were heat treated at 600°C for 180 minutes in air atmosphere. X-ray diffraction patterns exhibited that the anatase phase and silver coexisted in the resulted Ag NPs/TiO₂ nanofibers; transmission electron microscopy demonstrated Ag NPs well spread in the porous microstructure of composite fibers. The prepared nanofibers were utilized as photocatalyst for degradation of methyl orange. The degradation rate of methyl orange dye solution containing Ag/TiO₂ composite nanofibers is 99% only after irradiation for 3 hours. It is proposed that these new Ag NPs/TiO₂ composite nanofibers will have potential application in water pollution treatment.      

Preparation of ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles by mechanical alloying and annealing for sensitizing C-modified TiO<Subscript>2</Subscript> and acquirement of efficient photocatalyst

ZnFe₂O₄ nanoparticles sensitized by C-modified TiO₂ hybrids (ZnFe₂O₄–TiO₂/C) were successfully prepared by a feasible method. The ZnFe₂O₄ nanoparticles were prepared by mechanical alloying and annealing. The residual organic compounds in the synthetic process of TiO₂ were selected as the carbon source. The as-prepared composites were characterized by X-ray diffraction, Raman spectroscopy, X-ray fluorescence, transmission electron microscopy, X-ray photoelectron spectroscopy, ultraviolet–visible light diffuse reflectance spectroscopy (UV–Vis) and N₂ adsorption–desorption analysis. The photocatalytic activity of the photocatalysts was measured by degradation of methyl orange under ultraviolet (UV) light and simulated solar irradiation, respectively. The results show that the carbon did not enter the TiO₂ lattice but adhered to the surface of TiO₂. The photocatalytic activity of the as-prepared C-modified TiO₂ (TiO₂/C) improved both under UV and simulated solar light irradiation, but the improvement was not dramatic. Introduction of ZnFe₂O₄ into the TiO₂/C could enhance the absorption spectrum range. The ZnFe₂O₄–TiO₂/C hybrids exhibited a higher photocatalytic activity both than that of the pure TiO₂ and TiO₂/C under either UV or simulated solar light irradiation. The complex synergistic effect plays an important role in improving the photocatalytic performance of ZnFe₂O₄–TiO₂/C composites. The optimum photocatalytic performance was obtained from the ZnFe₂O₄(0.8 wt%)–TiO₂/C sample.     

In situ FT-IR studies of NO decomposition on Pt/TiO2 catalyst under UV irradiation

Photodecomposition of NO on the well-dispersed Pt/TiO₂ catalyst under UV irradiation was studied by in situ DRIFT (Diffuse-Reflectance Infrared Fourier-Transform) spectroscopy. 2 wt% Pt/TiO₂ catalyst was prepared by photochemical deposition method. The photocatalytic activity of Pt/TiO₂ is highly dependent on its pretreatment. Although the catalyst exhibited a highly adsorption capability to NO after hydrogen reduction or thermal evacuation at 500°C, no evidence upon NO decomposition was observed under UV irradiation. While reducing the catalyst at 300°C in the hydrogen flow, it not only exhibited an intense NO adsorption but also conducted a direct decomposition of NO to N₂ and O₂ under UV irradiation. The hydrogen reduction at 200°C led to a weaker NO adsorption. During UV irradiation, the IR peaks of NO fully disappeared and N₂O was formed. It is concluded that the photochemical prepared Pt/TiO₂ catalyst after activating at mild reduction conditions is highly active for NO photodecomposition. The effective oxidation states of the active components, the surface structure and the reaction mechanisms will be discussed.     

用分子轨道理论研究NO气体在TiO2表面吸附

根据一氧化氮(NO)气体在二氧化钛(TiO₂)表面吸附和脱附的实验结果, 揭示了气体脱附量的变化规律. 利用MOPAC 和GAUSSIAN分子轨道理论计算了在TiO₂(110)表面上吸附NO分子的原子簇模型, 电荷分布以及原子簇的能级, 推断了NO在TiO₂(110)表面吸附的稳定性.     

Doping of TiO2–GO and TiO2–rGO with Noble Metals: Synthesis,Characterization and Photocatalytic Performance for Azo Dye Discoloration

The nanocomposites of titania coupled with graphene oxide (GO) and reduced graphene oxide (rGO), respectively, were prepared by homogeneous hydrolysis with urea. Graphene was obtained by effect of high‐intensity cavitation field on natural graphite in the presence of strong aprotic solvents in pressurized ultrasonic reactor. The morphology of TiO₂–GO and TiO₂–rGO composites was assessed by scanning electron microscopy and atomic force microscopy. The nitrogen adsorption–desorption was used for determination of surface area (BET) and porosity. Raman and IR spectroscopy were used for qualitative analysis and diffuse reflectance spectroscopy was employed to estimate band‐gap energies. Further enhancement of the photocatalytic activity was attained by codoping of composites with noble metals—Au, Pd and Pt. The photocatalytic activity of TiO₂–GO and TiO₂–rGO were assessed by photocatalytic decomposition of Orange II dye in an aqueous slurry under UV and visible light irradiation. The photocatalytic activity of noble metals codoped samples was determined with decomposition of Reactive Black 5 azo dye.