Polymeric precursor synthesis of Ba2Ti9O20

Ba₂Ti₉O₂₀ was synthesized by Pechini method using citric acid as a chelating agent and ethylene glycol as an esterification agent. The effects, of the pH of the starting solutions and the molar ratio of citric acid to total metal cations concentration on the formation of Ba₂Ti₉O₂₀, were investigated. Increasing the pH of the starting solutions enhances the formation of Ba₂Ti₉O₂₀, but the increase of the molar ratio of citric acid to total metal cations concentration retards the formation of Ba₂Ti₉O₂₀ due to increased diffusion distances. Single-phase Ba₂Ti₉O₂₀ was obtained at 1200 °C for 4 h when the molar ratio of citric acid to total metal cations concentration was unity, regardless of the pH of the starting solutions. Increasing the molar ratio of citric acid to total metal cations concentration up to 2, single-phase Ba₂Ti₉O₂ was synthesized at 1200 °C for 6 h for the precursors with pH 3.5 and 6, but not for the precursors with pH 2.0. DTA, TG, XRD, FT–IR spectroscopy and Raman spectroscopy were used to characterize the precursors and the derived oxide powders. Details of the synthesis and characterizations of the resultant products were given.     

Nanocrystallization of SrBi2Nb2O9 from glasses in the system Li2B4O7---SrO---Bi2O3---Nb2O5

Transparent glasses in the system (100−x)Li₂B₄O₇–x(SrO---Bi₂O₃---Nb₂O₅) (10≤x≤60) (in molar ratio) were fabricated by a conventional melt-quenching technique. Amorphous and glassy characteristics of the as-quenched samples were established via X-ray powder diffraction (XRD) and differential thermal analyses (DTA) respectively. Glass–ceramics embedded with strontium bismuth niobate, SrBi₂Nb₂O₉ (SBN) nanocrystals were produced by heat-treating the as-quenched glasses at temperatures higher than 500 °C. Perovskite SBN phase formation through an intermediate fluorite phase in the glass matrix was confirmed by XRD and transmission electron microscopy (TEM). Infrared and Raman spectroscopic studies corroborate the observation of fluorite phase formation. The dielectric constant (_r) and the loss factor (D) for the lithium borate, Li₂B₄O₇ (LBO) glass comprising randomly oriented SBN nanocrystals were determined and compared with those predicted based on the various dielectric mixture rule formalism. The dielectric constant was found to increase with increasing SBN content in LBO glass matrix.     

Enhanced ferroelectric properties of multilayer SrBi2Ta2O9/SrBi2Nb2O9 thin films for NVRAM applications

Ferroelectric SrBi₂Ta₂O₉/SrBi₂Nb₂O₉ (SBT/SBN) multilayer thin films with various stacking periodicity were deposited on Pt/TiO₂/SiO₂/Si substrate by pulsed laser deposition technique. The X-ray diffraction patterns indicated that the perovskite phase was fully formed with polycrystalline structure in all the films. The Raman spectra showed the frequency of the O–Ta–O stretching mode for multilayer and single layer SrBi₂(Ta_0.5Nb_0.5)₂O₉ (SBNT) samples was 827–829 cm⁻¹, which was in between the stretching mode frequency in SBT (813 cm⁻¹) and SBN (834 cm⁻¹) thin films. The dielectric constant was increased from 300 (SBT) to 373 at 100 kHz in the double layer SBT/SBN sample with thickness of each layer being 200 nm. The remanent polarization (2P_r) for this film was obtained 41.7 μC/cm², which is much higher, compared to pure SBT film (19.2 μC/cm²). The coercive field of this double layer film (67 kV/cm) was found to be lower than SBN film (98 kV/cm).     

Synthesis, phase transformation and dielectric properties of sol–gel derived Bi2Ti2O7 ceramics

Sol–gel derived Bi₂Ti₂O₇ ceramic powders have been prepared from methoxyethoxides of bismuth and titanium (molar ratio of Ti/Bi = 1.23 and water/alkoxides = 1.31). The Bi₂Ti₂O₇ phase was stable at a low temperature (700 °C), but it then transformed into mixed phases of Bi₄Ti₃O₁₂ and Bi₂Ti₄O₁₁ at 850–1150 °C. The single phase of Bi₂Ti₂O₇ reoccurred at 1200 °C. Dielectric properties and ferroelectric behavior of samples sintered at 1150 and 1200 °C were examined. Under frequency of 1 MHz, samples sintered at 1150 and 1200 °C had a dielectric constant of 101.3 and 104.2, and a loss tangent of 0.0193 and 0.0145, respectively. Only the sample sintered at 1150 °C showed ferroelectric behavior, where remanent polarization is 3.77 μC cm⁻² and coercive field is 24 kV cm⁻¹. Thus, the Bi₂Ti₂O₇ did not exhibit ferroelectricity, but the mixed phase of Bi₄Ti₃O₁₂ and Bi₂Ti₄O₁₁ did.     

Carburization performance of Incoloy 800HT in CH4/H2 gas mixtures

Carburization performance of Incoloy 800HT has been studied after cyclic and isothermal exposures to CH₄/H₂ carburizing gas mixtures at high temperatures for 500 h. At 800 °C in 2% CH₄/H₂, Incoloy 800HT suffered external oxidation and carburization, the external continuous layer of reaction products consists primarily of Cr₇C₃, Mn_1.5Cr_1.5O₄, and FeCr₂O₄ with Fe(Cr, Al)₂O₄ as a minor phase. At 1100 °C in 10% CH₄/H₂, external carburization did not occur likely due to high carbon dissolution in the alloy substrate at this temperature. A thermodynamic analysis indicated that 1000 °C was an approximate critical temperature, below which the environment should result in mixed oxidizing/carburizing behavior, while above this temperature reducing carburizing behavior should occur. The experimental results approximately agree with the thermodynamic analysis. Metal dusting was not observed under highly carburizing conditions (a_C>1). The size and morphology of Cr-rich phases (or Cr-carbides) are both temperature- and time-dependent, while the external continuity is more temperature-dependent rather than time-dependent.     

Deposition of Sm2O3 doped CeO2 thin films from Ce(DPM)4 and Sm(DPM)3 (DPM=2,2,6,6-tetramethyl-3,5-heptanedionato) by aerosol-assisted metal–organic chemical vapor deposition

Samarium-doped ceria (SDC) thin films were prepared from Sm(DPM)₃ (DPM = 2,2,6,6-tetramethyl-3,5-heptanedionato) and Ce(DPM)₄ using the aerosol-assisted metal–organic chemical vapor deposition method. -Al₂O₃ and NiO-YSZ (YSZ = Y₂O₃-stabilized ZrO₂) disks were chosen as substrates in order to investigate the difference in the growth process on the two substrates. Single cubic structure could be obtained on either -Al₂O₃ or NiO-YSZ substrates at deposition temperatures above 450 °C; the similar structure between YSZ and SDC results in matching growth compared with the deposition on -Al₂O₃ substrate. A typical columnar structure could be obtained at 650 °C on -Al₂O₃ substrate and a more uniform surface was produced on NiO-YSZ substrate at 500 °C. The composition of SDC film deposited at 450 °C is close to that of precursor solution (Sm : Ce = 1 : 4), higher or lower deposition temperature will both lead to sharp deviation from this elemental ratio. The different thermal properties of Sm(DPM)₃ and Ce(DPM)₄ may be the key reason for the variation in composition with the increase of deposition temperature.     

Dielectric properties of Ba0.6Sr0.4TiO3-Sr(Ga0.5Ta0.5)O3 solid solutions

Ba_0.6Sr_0.4TiO₃-Sr(Ga_0.5Ta,sub>0.5)O₃ solid solutions are prepared by a solid-state reaction method, and their dielectric and tunable characteristics are investigated. The solid solutions with cubic perovskite structures are obtained for compositions of 10-50 mol% Sr(Ga_0.5Ta_0.5)O₃. It is observed that the addition of Sr(Ga_0.5Ta_0.5)O₃ into Ba_0.6Sr,sub>0.4TiO₃ causes a shift in the phase transition peak to a lower temperature. Ba_0.6Sr_0.4TiO₃-Sr(Ga_0.5Ta,sub>0.5)O₃ solid solutions exhibit depressed and broadened phase transition peaks, resulting in decreased dielectric constants and dielectric losses at room temperature. With the increase of Sr(Ga_0.5Ta_0.5)O₃ content, the dielectric constant, loss tangent, and tunability are decreased. 0.9Ba_0.6Sr_0.4TiO₃-0.1Sr(Ga_0.5Ta,sub>0.5)O₃ has a dielectric constant ϵ = 534 and a tunability of 16% at 100 kHz under 2.63 kV/mm. The dielectric characteristics of Ba_0.6Sr_0.4TiO₃-Sr(Ga_0.5Ta,sub>0.5)O₃ ceramics at microwave frequencies are also evaluated.     

Microwave dielectric properties and microstructures of MgTa2O6 ceramics with CuO addition

The effect of CuO addition on the microstructures and the microwave dielectric properties of MgTa₂O₆ ceramics has been investigated. It is found that low level-doping of CuO (up to 1 wt.%) can significantly improve the density of the specimens and their microwave dielectric properties. Tremendous sintering temperature reduction can be achieved due to the liquid phase effect of CuO addition observed by scanning electronic microscopy (SEM). The sintered samples exhibit excellent microwave dielectric properties, which depend upon the liquid phase and the sintering temperature. With 0.5 wt.% CuO addition, MgTa₂O₆ ceramic can be sintered at 1400 °C and possesses a dielectric constant (_r) of 28, a Q × f value of 58000 GHz and a temperature coefficient of resonant frequency (τ_f) of 18 ppm/°C.     

Structure and electrical properties of (100)-oriented Pb(Zn1/3Nb2/3)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 thin films on La0.7Sr0.3MnO3 electrode by chemical solution deposition

(100)-oriented 0.462Pb(Zn_1/3Nb_2/3)O₃–0.308Pb(Mg_1/3Nb_2/3)O₃–0.23PbTiO₃ (PZN-PMN-PT) perovskite ferroelectric thin films were prepared on La_0.7Sr_0.3MnO₃/LaAlO₃ (LSMO/LAO) substrate via a chemical solution deposition route. The perovskite LSMO electrode was found to effectively suppress the pyrochlore phase while promote the growth of the perovskite phase in the PZN-PMN-PT film. The film annealed at 700 °C exhibited a high dielectric constant of 2130 at 1 kHz, a remnant polarization, 2P_r, of 29.8 μC/cm², and a low leakage current density of 7.2 × 10^− 7 A/cm² at an applied field of 200 kV/cm. The ferroelectric polarization was fatigue-free at least up to 10¹⁰ cycles. Piezoelectric coefficient, d₃₃, of 48 pm/V was also demonstrated. The results showed that much superior properties could be achieved with the PZN-PMN-PT thin films on the solution derived LSMO electrode than on Pt electrode by sputtering.     

Microstructural and piezoelectric properties of low temperature sintering PMN-PZT ceramics with the amount of Li2CO3 addition

PMN-PZT ceramics doped with Li₂CO₃ and Bi₂O₃ as sintering aids were manufactured in order to develop the low temperature sintering ceramics for multilayer piezoelectric transformer, and their micro structural, dielectric and piezoelectric properties were investigated. The sintering aids were proved to lower the sintering temperature of doped PMN-PZT ceramics due to the effect of LiBiO₂ liquid phase. Optimal values for multilayer piezoelectric transformer application, such as electromechanical coupling factor (k_p) of 0.50, mechanical quality factor (Q_m) of 2264, and dielectric constant (K) of 1216, and curie temperature (T_c) of 317 °C were found at 0.1 wt.% Li₂CO₃ added ceramics sintered at 940 °C.     

Reaction between the tetragonal tungsten bronze niobate K2Sr4Nb10O30 and the perovskite Pb(Mg1/3Nb2/3)O3

The search for dielectric materials with a high dielectric constant and ′_r = ƒ(T) curves with a flat profile fitting the X7R specification is still ongoing. Promising results were obtained by mixing compounds with closely related structures, such as the tetragonal tungsten bronze (TTB) niobate K₂Sr₄Nb₁₀O₃₀ and the perovskite Pb(Mg_1/3Nb_2/3)O₃ (PMN). The present study, based on three methods of synthesis, explores the origin of the spreading out of the dielectric curves ′_r = ƒ(T). For the composition 10x K_0.2Sr_0.4NbO₃ (KSN) + (1 − x)Pb(Mg_1/3Nb_2/3)O₃ (PMN) with x = 0.3–0.6, the three synthesis methods provided similar characteristics and for the highest perovskite ratio (x = 0.3), the ′_r = ƒ(T) curve exhibits a flat profile. When lithium is used as a sintering agent, ′_r = ƒ(T) curves present a linear dependency with the temperature. These materials are also characterized by a structural and a microstructural inhomogeneity. Two phases TTB and perovskite type, different from KSN and PMN, are present after calcination and sintering, but not evenly distributed. The PbO loss during sintering also contributes to the evolution of the properties of the material.     

Synthesis, structure refinement and characterization of tetrahydrated acid gadolinium diphosphate HGdP2O7·4H2O

Synthesis and single crystal structure are reported for a new gadolinium acid diphosphate tetrahydrate HGdP₂O₇·4H₂O. This salt crystallizes in the monoclinic system, space group P2₁/n, with the following unit-cell parameters: a = 6.6137(2) Å, b = 11.4954(4) Å, c = 11.377(4) Å, β = 87.53(2)° and Z = 4. Its crystal structure was refined to R = 0.0333 using 1783 reflections. The corresponding atomic arrangement can be described as an alternation of corrugated layers of monohydrogendiphosphate groups and GdO₈ polyhedra parallel to the () plane. The cohesion between the different diphosphoric groups is provided by strong hydrogen bonding involving the W4 water molecule.

IR and Raman spectra of HGdP₂O₇·4H₂O confirm the existence of the characteristic bands of diphosphate group in 980–700 cm⁻¹ area. The IR spectrum reveals also the characteristic bands of water molecules vibration (3600–3230 cm⁻¹) and acidic hydrogen ones (2340 cm⁻¹). TG and DTA investigations show that the dehydration of this salt occurs between 79 and 900 °C. It decomposes after dehydration into an amorphous phase. Gadolinium diphosphate Gd₄(P₂O₇)₃ was obtained by heating HGdP₂O₇·4H₂O in a static air furnace at 850 °C for 48 h.     

Dielectric Properties of Ba0.6Sr0.4TiO3-La(B0.5Ti0.5)O3 (B=Mg, Zn) Ceramics

Ba_0.6Sr_0.4TiO₃-La(B_0.5Ti_0.5)O₃ (B = Mg, Zn) ceramics were prepared by a solid-state reaction method, and their microwave dielectric characteristics and tunability were investigated. The ferroelectric-dielectric solid solutions with cubic perovskite structures were obtained for compositions of 10 to 60 mol% La(Mg_0.5Ti_0.5)O₃ and 10 to 50 mol% La(Zn_0.5Ti_0.5)O₃. With the increase of linear oxide dielectric content, the dielectric constant and tunability were decreased and Qf was increased. Ba_0.6Sr_0.4TiO₃-La(Mg_0.5Ti_0.5)O₃ has better dielectric properties than Ba_0.6Sr_0.4TiO₃-La(Zn_0.5Ti_0.5)O₃. 0.9Ba_0.6Sr_0.4TiO₃-0.1La(Mg_0.5Ti_0.5)O₃ has a dielectric constant ε = 338.2, Qf = 979 GHz and a tunability of was 3.7% at 100 kHz under 1.67 kV/mm. The Qf value of 0.5Ba_0.6Sr_0.4TiO₃- 0.5La(Mg_0.5Ti_0.5)O₃ reached 9367 GHz, but the tunable properties were lost.     

Effect of La2O3 addition and O2 atmosphere on the electric properties of SnO2TiO2

The electric properties of (Sn, Ti)O₂ doped with 1.00 mol% CoO, 0.05 mol% Nb₂O₅ and x mol% La₂O₃ (0.25≤x≤1.00) have been studied. Sn_0.25Ti_0.75Co_0.01Nb_0.005 doped with 0.50 mol% La₂O₃ has a nonlinearity coefficient of 6. An increase in the concentration of La₂O₃ raised its resistivity, thereby altering the electric properties of the material. A thermal treatment in oxygen atmosphere increased the nonlinearity coefficient to a value of 9.     

Effect of SnO2 on the photocatalytical properties of TiO2 films

TiO₂/SnO₂ thin films with different tin atomic percentages were successfully prepared on glass substrates by the spray pyrolysis method from an alcoholic solution of TiO[C₅H₇O₂]₂ with different concentrations of SnCl₄. The TiO₂/SnO₂ thin films prepared at 450 °C presented the anatase phase in polycrystalline configuration from %Sn = 0 in the starting solution up to %Sn = 20, at higher tin content the films present an amorphous configuration. The resulting thin films have a homogeneous surface structure with some porosity. The photocatalytical properties of the films were evaluated with the degradation of methylene blue. The products of the degradation reaction were identified by ¹H nuclear magnetic resonance and the film properties were studied by atomic force microscopy, scanning electron microscopy, UV–Vis spectroscopy, and X-ray diffraction.     

微波可调BaSrZnSi2O7-Ba0.5Sr0.5TiO3复合陶瓷的结构与介电性能关系

采用传统电子陶瓷工艺制备出BaSrZnSi₂O₇-Ba_0.5Sr_0.5TiO₃复合陶瓷,系统研究了其相结构、微观结构和介电性能。研究表明：随着BaSrZnSi₂O₇的加入,样品的居里峰向低温方向移动;但BaSrZnSi₂O₇加入量达到一定程度后,居里峰在一定的温度下保持稳定。调制特性变化规律类似于居里峰的移动。品质因数（Q值）的变化主要取决于微波材料加入后的"掺杂"和"复合"效果。当BaSrZnSi₂O₇质量分数为60wt% 时,复合材料表现出良好的综合特性：介电可调率为 16%（10 kHz）,介电常数为152,Q值达到417（2.720 GHz）,表明BaSrZnSi₂O₇-Ba_0.5Sr_0.5TiO₃复合陶瓷是电可调微波器件很好的潜在应用材料。     

Improvements in mechanical properties of TiB2 ceramics tool materials by the dispersion of Al2O3 particles

TiB₂–Al₂O₃ composites with Ni–Mo as sintering aid have been fabricated by a hot-press technique at a lower temperature of 1530 °C for 1 h, and the mechanical properties and microstructure were investigated. The microstructure consists of dispersed Al₂O₃ particles in a fine-grained TiB₂ matrix. The addition of Al₂O₃ increases the fracture toughness up to 6.02 MPa m^1/2 at an amount of 40 vol.% Al₂O₃ and the flexural strength up to 913.86 MPa at an amount of 10 vol.% Al₂O₃. The improved flexural strength of the composites is a result of higher density than that of monolithic TiB₂. The increase of fracture toughness is a result of crack bridging by the metal grains on the boundaries, and crack deflection by weak grain boundaries due to the bad wetting characters between Ni–Mo and Al₂O₃.     

Fe2O3 films for Ξ optics: Raman and XAS characterization

Two different sol-gel syntheses, both starting from inorganic salts as precursors, Fe(NO₃)₃ · 9H₂O or FeCl₃ - 6H₂O, have been employed to prepare, by dip-coating, films of -Fe₂O₃, which are currently investigated for their high non-linear optical susceptibility Ξ⁽³⁾. Thermal treatments at 500°C lead to the -Fe₂O₃ hematite structure for both preparations as indicated by XRD and Raman. Information on the differences in the local order between the two preparations are obtained by X-ray absorption spectroscopy (XAS) measurements.     

Effects of milling method and calcination condition on phase and morphology characteristics of Mg4Nb2O9 powders

Magnesium niobate, Mg₄Nb₂O₉, powders has been synthesized by a solid-state reaction. Both conventional ball- and rapid vibro-milling have been investigated as milling methods, with the formation of the Mg₄Nb₂O₉ phase investigated as a function of calcination conditions by DTA and XRD. The particle size distribution of the calcined powders was determined by laser diffraction technique, while morphology, crystal structure and phase composition were determined via a combination of SEM, TEM and EDX techniques. The type of milling method together with the designed calcination condition was found to show a considerable effect on the phase and morphology evolution of the calcined Mg₄Nb₂O₉ powders. It is seen that optimization of calcination conditions can lead to a single-phase Mg₄Nb₂O₉ in both milling methods. However, the formation temperature and dwell time for single-phase Mg₄Nb₂O₉ powders were lower with the rapid vibro-milling technique.     

Influence of rare-earth oxides on structure and crystallization properties of Bi2O3–B2O3 glass

Bi₂O₃·B₂O₃ glasses doped with rare-earth oxides (RE₂O₃) (RE³⁺ = La³⁺, Pr³⁺, Sm³⁺, Gd³⁺, Er³⁺ and Yb³⁺) were prepared by the melting–quenching method. The relationships between composition and properties were demonstrated by IR, DSC, XRD and SEM analysis. The results show that the network structure resembles that of undoped Bi₂O₃·B₂O₃ glass, composing of [BO₃], [BO₄] and [BiO₆] units. RE₂O₃ stabilizes the glass structure as a modifier. Transition temperature (T_g) increases linearly with cationic field strength (CFS) of RE³⁺. La₂O₃, Pr₂O₃, Sm₂O₃ and Gd₂O₃ are benefit to promote the formation of BiBO₃ crystal. When Er₂O₃ and Yb₂O₃ are introduced, respectively, the main crystal phase changes to Bi₆B₁₀O₂₄. Transparent surface crystallized samples are obtained by reheating at 460–540 °C for 5 h. In this case, needle like BiBO₃ crystal or rare-earth-doped BiBO₃ crystal (Pr_xBi_1−xBO₃ and Gd_xBi_1−xBO₃) are observed, which is promising for non-linear optical application.