Photoluminescence and thermoluminescence characterization of Eu- and Dy -activated Ca3(PO4)2 phosphor

Rare-earth-doped polycrystalline Ca₃(PO₄)₂:Eu, Ca₃(PO₄)₂:Dy and Ca₃(PO₄)₂:Eu,Dy phosphors prepared by a modified solid-state synthesis has been studied for its X-ray diffraction, thermoluminescence (TL) and photoluminescence (PL) characteristics. The PL emission spectra of the phosphor suggest the presence of Eu³⁺ ion in Ca₃(PO₄)₂:Eu and Dy³⁺ ion in Ca₃(PO₄)₂:Dy lattice sites. The TL glow curve of the Ca₃(PO₄)₂:Eu compounds has a simple structure with a prominent peak at 228 °C, while Ca₃(PO₄)₂:Dy peaking at 146 and 230 °C. TL sensitivity of phosphors are compared with CaSO₄: Dy and found 1.52 and 1.20 times less in Ca₃(PO₄)₂:Eu and Ca₃(PO₄)₂:Dy phosphors, respectively. The Ca₃(PO₄)₂:Eu,Dy phosphors shows switching behavior under two different excitation wavelengths and enhancement in PL intensity of Dy³⁺ ions were reported. The paper discusses the photoluminescence and thermoluminescence behavior of Eu³⁺ and Dy³⁺ ion in Ca₃(PO₄)₂ hosts, it may be applicable to solid-state lighting as well as thermoluminescence dosimetry applications.     

A novel Dy3+-doped Gd(PO3)3 white-light phosphors under VUV excitation for Hg-free lamps application

Novel Dy³⁺-doped Gd(PO₃)₃ white light phosphors each with an orthorhombic system are successfully synthesized by solid-state reaction. The luminescence properties of white-light Gd_1-x(PO₃)₃:xDy³⁺ (0<x≤ 0.25) under vacuum ultraviolet (VUV) excitation are investigated. The strong absorption at around 147 nm in excitation spectrum energy can be transferred to the energy levels of Dy³⁺ ion from the host absorption. Additionally, the white light phosphor is activated by a single Dy³⁺ ion. Therefore, the luminescence of Gd_1-x(PO₃)₃:xDy (0<x≤ 0.25) under VUV excitation is effective, and it has the promise of being applied to mercury-free lamp.     

Synthesis and photoluminescence properties of MZr2(PO4)3:Eu3+; Bi3+ (M=Na; K) phosphors

A series of new red phosphors, MZr₂(PO₄)₃:Eu³⁺; Bi³⁺ (M=Na; K), were synthesized using the solidstate reaction method, and their photoluminescence spectra were measured. The MZr₂(PO₄)₃:Eu³⁺; Bi³⁺ (M=Na; K) phosphors were efficiently excited by an ultraviolet (UV; 395 nm) source, and showed intense orange-red emission at 595 nm. Further investigation of the concentration-dependent emission spectra indicated that the MZr₂(PO₄)₃:Eu³⁺; Bi³⁺ (M=Na; K) phosphors exhibit the strongest luminescence intensity when y = 0.01 in NaZr_2(0:95−y)(PO₄)₃:Eu_0.10³⁺, Bi_2y ³⁺ and y = 0.09 in NaZr_2(0.95−y)(PO₄)₃:Eu_0.10³⁺, Bi_2y ³⁺, whereas the relative PL intensity decreases with increasing Bi³⁺ concentration due to concentration quenching. The addition of Bi³⁺ widens the excitation band of NaZr_2(0.95−y)(PO₄)₃:Eu_0.10³⁺, Bi_2y ³⁺ around 320 nm, which provides the useful idea of broadening the excitation band around 300–350 nm to fit the ultraviolet chip.     

Synthesis and luminescence properties of Eu, Ce and Tb-activated Sr3La2(BO3)4 under UV excitation

The spectroscopic properties in UV-excitable range for the phosphors of Sr₃La₂(BO₃)₄:RE³⁺ (RE³⁺=Eu³⁺, Ce³⁺, Tb³⁺) were investigated. The phosphors were synthesized by conventional solid-state reactions. The photoluminescence (PL) spectra and commission international de I'Eclairage (CIE) coordinates of Sr₃La₂(BO₃)₄:RE³⁺ were investigated. The f-d transitions of Eu³⁺, Ce³⁺ and Tb³⁺ in the host lattices are assumed and corroborated. The PL and PL excitation (PLE) spectra indicate that the main emission wavelength of Sr₃La₂(BO₃)₄:Eu³⁺ is 611 nm, and Sr₃La₂(BO₃)₄:Ce³⁺ shows dominating emission peak at 425 nm, while Sr₃La₂(BO₃)₄:Tb³⁺ displays green emission at 487, 542, 582 and 620 nm. These phosphors were prepared by simple solid-state reaction at 1000 °C. There are lower reactive temperature and more convenient than commercial phosphors. The Sr₃La₂(BO₃)₄:Tb³⁺ applied to cold cathode fluorescent lamp was found to emit green light and have a major peak wavelength at around 542 nm. These phosphors may provide a new kind of luminescent materials under ultraviolet excitation.     

Luminescent properties of Dy doped SrMoO4 phosphor

Trivalent dysprosium ions (Dy³⁺) doped strontium molybdate (SrMoO₄) phosphors were synthesized by solid-state reaction and their photoluminescence (PL) properties were investigated. X-ray powder diffraction (XRD) analysis confirmed the formation of SrMoO₄:Dy³⁺. PL measurements indicated that the phosphor exhibited intense emission at 482, 490 (⁴F_9/2→⁶H_15/2) and 575 nm (⁴F_9/2→⁶H_13/2) under UV excitation. The effect of the doping concentration of Dy³⁺in SrMoO₄:Dy³⁺ on the PL was investigated in detail. Na⁺ ion was a good charge compensator for SrMoO₄:Dy³⁺.     

Luminescence investigations on sulfate apatite Na6(SO4)2FCl:RE (RE=Dy, Ce or Eu) phosphors

A new phosphor in the Cl-F system doped with Dy, Ce and Eu has been reported. Characterization of this phosphor using XRD, PL and TL techniques is described. Polycrystalline Na₆(SO₄)₂FCl:Dy; Na₆(SO₄)₂FCl:Ce and Na₆(SO₄)₂FCl:Eu phosphors prepared by a solid state diffusion method have been studied for their X-ray diffraction, photoluminescence (PL) and thermoluminescence (TL)characteristics. The PL excitation and emission spectra of phosphors were obtained. Dy³⁺ emission in the host at 475 and 570 nm is observed due to ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 transition, respectively, whereas the PL emission spectra of Na₆(SO₄)₂FCl:Ce phosphor shows the Ce³⁺ emission at 322 nm due to 5d→4f transition of Ce³⁺ ion. In Na₆(SO₄)₂FCl:Eu lattice, Eu²⁺ as well as Eu³⁺ emissions are observed. The emission of europium ion in this compound exhibits the blue as well as red emission. The TL glow curves of the same compounds have the simple structure with a prominent peak at 150, 175 and 200 °C. TL response, fading, reusability and trapping parameters of the phosphors are also studied. The TL glow curves of γ-irradiated Na₆(SO₄)₂FCl sample show one glow peak indicating that only one set of traps is being activated within the particular temperature range each with its own value of activation energy (E) and frequency factor (s). The trapping parameters associated with the prominent glow peak are calculated using Chen’s half width method. The release of hole/electron from defect centers at the characteristic trap site initiates the luminescence process in these materials. The intensity of the TL glow peaks increases with increase of the added γ-ray dose to the samples.     

Violet-blue-shift of emission and enhanced luminescent properties of Ca3(PO4)2:Ce3+ phosphor induced by substitution of Gd3+ ions

Ca₃(PO₄)₂:1mol%Ce³⁺/xGd³⁺ (where x = 0.5, 1.0, 3.0 and 5.0 mol%) phosphors were synthesized by the conventional combustion synthesis method. The X-ray diffraction patterns showed their rhombohedral structure with space group of R3c. The optical properties including reflectance, excitation and emission were investigated. The band gaps of the phosphors were calculated from diffuse reflectance spectra data using the Kubelka–Munk function. The photoluminescence (PL) excitation spectra exhibited the broadband 4f–5d transition of Ce³⁺ ions centered at ~265 nm. The PL emission properties of the Ca₃(PO₄)₂:Ce³⁺/Gd³⁺ phosphors were studied as a function of the Gd³⁺ ion concentration. The Ca₃(PO₄)₂:Ce³⁺/Gd³⁺ phosphor had a wide emission band ranging from 320 to 400 nm, and peaking at 365 nm. This emission is ascribed to the transition from the higher 5d band to ²F_7/2, ²F_5/2 states of the Ce³⁺ ion. The 365 nm peak shifted to longer wavelengths with increasing concentration of the Gd³⁺ ion. The CIE chromaticity diagram of Ca₃(PO₄)₂:Ce³⁺/Gd³⁺ phosphor showed tunable emission colour from violet to violet-blue, suggesting that this phosphor can act as a source of violet-blue colour for application in information displays, phototherapy and photoluminescent liquid crystal displays.     

Intense green-emitting Sr2LiSiO4F:Eu2+ phosphor for n-UV white LEDs

Eu²⁺-activated Sr₂LiSiO₄F phosphors were synthesized at 900°C by solid-state reaction in reducing atmosphere, and their photoluminescence (PL) properties were systematically investigated by diffuse reflection spectra, PL excitation and emission spectra, and by the fluorescence decay curve. Sr₂LiSiO₄F:Eu²⁺ emits intense green light at 520 nm originating from the 5d¹4f⁶−4f⁷ transition of Eu²⁺ under 365 nm n-UV excitation. The PL excitation spectrum matches the emission from n-UV chips. These materials could be promising green phosphors for use in generating white light in phosphor-converted white light-emitting-diodes (LEDs).     

Rare earth doped lithium titanate (Li2TiO3) for potential phosphor applications

Lithium titanate ceramics doped with three rare earth (RE) ions namely Eu³⁺, Dy³⁺ and Tb³⁺ were synthesized and their photoluminescence (PL) properties were investigated. PL spectra of Eu doped sample showed peaks corresponding to the ⁵D₀→⁷F_j (j=0, 1, 2, 3 and 4) transitions under 230 nm excitation. Strong red emission coming from the hypersensitive ⁵D₀→⁷F₂ transition of Eu³⁺ ion suggested the presence of the dopant ion in a highly asymmetric environment. Dy doped samples showed the Dy³⁺ emission characteristic due to ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 transitions. Their relative intensity ratios also suggested the presence of asymmetric environment around the metal ion. In case of the Tb³⁺ doped sample blue-green emission corresponding to the ⁵D₄→⁷F_j (j=6, 5 and 4) transitions was seen. The fluorescence lifetimes of Eu³⁺, Dy³⁺ and Tb³⁺ ions were found to be 645, 900 and 740 μs, respectively. PL intensity of the individual rare earth doped samples was compared with commercial red and green phosphors. It was found that the emission from Eu doped titanate sample was 46% of the commercial red phosphor and in case of the Tb samples it was 30% when excited at 230 nm. However, the synthesized Eu doped titanate sample showed better color purity as compared to the commercial phosphor. The titanate host was doped with all the three rare earths to get white light emission from the system. The individual rare earth ion content was optimized so as to get a near white light emission. The color coordinates of the triple doped systems were evaluated and plotted on the CIE x–y diagram. Our results suggest that lithium titanate has enough potential to be a phosphor material.     

Sol-gel synthesis, structural and optical properties of rare earth ions (Sm or Dy) activated Ca3Ga2Si3O12 powder phosphors

Structural, morphological and optical properties of rare earth ions (RE³⁺=Sm³⁺ or Dy³⁺) activated Ca₃Ga₂Si₃O₁₂ (CaGaSi) phosphors synthesized by the sol-gel method are reported. XRD results confirmed the cubic phase structure of RE³⁺:CaGaSi phosphors. From the SEM images of RE³⁺:CaGaSi phosphors, it is observed that the particles are agglomerated. Photoluminescence spectra of Sm³⁺:CaGaSi phosphors have shown bright orange red emission at 598 nm (⁴G_5/2→⁶H_7/2) with an excitation wavelength of λ_exci=401 nm. In the case of Dy³⁺:CaGaSi phosphors bright yellow emission has been observed at 574 nm (⁴F_9/2→ ⁶H_13/2) with λ_exci=451 nm. From the PL spectral results, the rare earth ion concentration of CaGaSi phosphors is optimized.     

Enhanced luminescence of Ca3B2O6:Dy phosphors by Na-codoping for LED applications

The Ca_2.95−yDy_0.05B₂O₆:yNa⁺ (0≤y≤0.20) phosphors were synthesized at 1100 °C in air by the solid-state reaction route. The as-synthesized phosphors were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), photoluminescence excitation (PLE), photoluminescence (PL) spectra and thermoluminescence (TL) spectra. The PLE spectra show the excitation peaks from 300 to 400 nm due to the 4f-4f transitions of Dy³⁺. This mercury-free excitation is useful for solid-state lighting and light-emitting diodes (LEDs). The emission of Dy³⁺ ions on 350 nm excitation was observed at 480 nm (blue) due to the ⁴F_9/2→⁶H_15/2 transitions, 575 nm (yellow) due to ⁴F_9/2→⁶H_13/2 transitions and 660 nm (red) due to weak ⁴F_9/2→⁶H_11/2 emissions. The PL results from the investigated Ca_2.95−yDy_0.05B₂O₆:yNa⁺ phosphors show that Dy³⁺ emissions increase with the increase of the Na⁺ codoping ions. The integral intensity of yellow to blue (Y/B) can be tuned by controlling Na⁺ content. By the simulation of white light, the optimal CIE value (0.328, 0.334) can be achieved when the content of Na⁺-codoping ions is y=0.2. The results imply that the Ca_2.95−yDy_0.05B₂O₆:yNa⁺ phosphors could be potentially used as white LEDs.     

Luminescence in trivalent rare earth activated Sr4Al2O7 phosphor

In this paper we report the combustion synthesis of trivalent rare-earth (RE³⁺ = Dy, Eu and Ce) activated Sr₄Al₂O₇ phosphor. The prepared phosphors were characterized by the X-ray powder diffraction (XRD) and photoluminescence (PL) techniques. Photoluminescence emission peaks of Sr₄Al₂O₇:Dy³⁺ phosphor at 474 nm and 578 nm in the blue and yellow region of the spectrum. The prepared Eu³⁺ doped phosphors were excited by 395 nm then we found that the characteristics emission of europium ions at 615 nm (⁵D₀?⁷F₂) and 592 nm (⁵D₀?⁷F₁). Photoluminescence (PL) peaks situated at wavelengths of 363 and 378 nm in the UV region under excitation at around 326 nm in the Sr₄Al₂O₇:Ce³⁺ phosphor.     

Dy含量对红色长余辉发光材料Sr3Al2Ｏ6:Eu2＋,Dy3＋性能的影响

采用溶胶凝胶法制备了Sr₃Al₂Ｏ₆:Eu^2＋,Dy^3＋红色长余辉发光材料,利用X射线衍射仪对材料的物相进行了分析,结果表明,1200℃下制备的样品的物相为Sr₃Al₂Ｏ₆,少量的Eu和Dy掺杂没有影响样品的相组成.采用荧光分光光度计、照度计测定了样品的发光特性.结果表明Sr₃Al₂Ｏ关键词： 红色长余辉 3Al₂Ｏ₆')" href="#">Sr₃Al₂Ｏ₆ 溶胶凝胶法     

Intense blue-emitting Ca5Al8O14: Eu phosphor for mercury free lamp

The calcium aluminates doped with Eu ions, Ca₅Al₈O₁₄: Eu, phosphors are prepared by the combustion method. The formation of crystalline aluminates was confirmed by X-ray diffraction pattern. The prepared phosphors were characterized by SEM, TGA, DTA, particle size analyzer and Photoluminescence (PL) techniques. From the UV-excited luminescence spectra it was found that the Eu ions acts as a luminescent centre with luminescence at the blue (λ _max = 470 nm) region due to 4f ⁶5d ¹ → 4f ⁷ transition. The excitation spectra show the broad band at 355 nm wavelength (λ _em = 470 nm). The excitation 355 nm is a mercury free excitation and therefore Ca₅Al₈O₁₄: Eu may be useful for the solid state lighting phosphor in lamp industry.      

Photoluminescence spectra of thenardite Na2SO4 activated with rare-earth ions, Ce, Sm, Tb, Dy and Tm

Five Na₂SO₄:RE³⁺ phosphors activated with rare-earth (RE) ions (RE³⁺=Ce³⁺, Sm³⁺, Tb³⁺, Dy³⁺ and Tm³⁺) were synthesized by heating natural thenardite Na₂SO₄ from Ai-Ding Salt Lake, Xinjiang, China with small amounts of rare-earth fluorides, CeF₃, SmF₃, TbF₃, DyF₃ and TmF₃, at 920 °C in air. The photoluminescence (PL) and optical excitation spectra of the obtained phosphors were measured at 300 and 10 K. In the PL spectrum of Na₂SO₄:Ce³⁺ at 300 K, two overlapping bands with peaks at 335 and 356 nm due to Ce³⁺ were first observed. Narrow bands observed in PL and excitation spectra of Na₂SO₄:RE³⁺ (RE³⁺=Sm³⁺, Tb³⁺, Dy³⁺ and Tm³⁺) phosphors were well identified with the electronic transitions within the 4fⁿ (n=5, 8, 9 and 12) configurations of RE³⁺. The existence of excitation bands with high luminescence efficiency at wavelengths shorter than 230 nm is characteristic of Na₂SO₄:RE³⁺ (RE³⁺=Sm³⁺, Tb³⁺, Dy³⁺ and Tm³⁺) phosphors. The obtained results suggest that these phosphors are unfavorable as the phosphor for usual fluorescence tubes, i.e., mercury discharge tubes, but may be favorable as the phosphor for UV-LED fluorescent tubes and as cathodoluminescence, X-ray luminescence and thermoluminescence phosphors.     

Luminescence properties of novel NaBa4(BO3)3:Ce, Eu phosphors

Novel Eu³⁺, Ce³⁺ activated NaBa₄(BO₃)₃ phosphors were synthesized by solid-state reactions. The excitation spectrum of NaBa₄(BO₃)₃:Ce³⁺ consists of an intense band peaking at 350 nm and a weak band in the higher energy side, and the emission spectrum exhibits a blue band with a maximum at about 420 nm. The Eu³⁺ emission in NaBa₄(BO₃)₃ consists of the transitions from ⁵D₀ to ⁷F_J, and the excitation spectrum consists of broad excitation band peaking at 270 nm and some intense narrow lines. The optimum doped concentration, the critical distance of the concentration quenching, and the fluorescence lifetime have also been investigated.     

Preparation and luminescent properties of phosphor MGd2(MoO4)4: Eu (M=Ca, Sr and Ba)

Intense red emitting phosphors MGd₂(MoO₄)₄: Eu³⁺ (M=Ca, Sr and Ba) have been synthesized by the simple sol-gel technique. The formation processes and the phase impurity of phosphors are characterized by thermogravimetry-differential thermal analysis (TG-DTA) and power X-ray diffraction (XRD). The narrower size distribution and the regular shape of the phosphor particles are also measured by Field emission scanning electronic microscopy (FE-SEM). Photo-luminescent properties of the phosphors are performed at room temperature. Their excitation spectra present strong absorption at 395 nm near-UV light and 465 nm blue light, which match well with commercial LED chips. The phosphors exhibit satisfactory and excellent red light dominated by 616 nm and their photoluminescence intensity is about 3-4 times stronger than that of phosphor YAG under the 465 nm excitation. In addition, the optimal concentrations of Eu³⁺ for phosphors MGd₂(MoO₄)₄ (M=Ca, Sr and Ba) have also been determined.     

VUV sensitisation of Eu emission by Tb in Ba3Tb(PO4)3-Eu

The luminescence properties of Ba₃Tb_0.9Eu_0.1(PO₄)₃ and Ba₃Gd_0.9Eu_0.1(PO₄)₃ phosphors were studied for excitation over the 120-300 nm wavelength range. It is found that Tb³⁺, which exhibits a strong vacuum-ultraviolet (VUV) absorption band, provides sensitisation of Eu³⁺ emission in this host. This effect can be used to develop phosphors with enhanced conversion efficiency of the VUV radiation into visible light.     

Synthesis, luminescence and crystallographic structure of Eu-doped garnet-type yafsoanite Ca3Te2(ZnO4)3

A red-emitting phosphor of Eu³⁺-doped calcium–tellurium–zinc oxide, Ca₃Te₂(ZnO₄)₃, with a garnet-type structure was synthesized by high temperature solid-state reactions. This phosphor exhibited a strong red emission. The photoluminescence excitation spectrum showed that Ca₃Te₂(ZnO₄)₃:Eu³⁺ can be effectively excited by UV–visible light. The property of long-wavelength excitation for this material has a benefit as a red phosphor in application of white light-emitting diodes. The colour coordinates were calculated. The excitation and emission spectra and luminescence decay curves were obtained using a pulsed, tunable, narrowband dye laser. Crystallographic sites and charge compensation mechanism of Eu³⁺ ions were discussed. The emission line from Eu³⁺ in intrinsic crystallographic site in the lattice was located at 579.56 nm. The emission line from Eu³⁺ in another disturbed site, which is created by the defects created by the charge-compensation, was located at 580.88 nm. The disordered crystallographic sites of Eu³⁺ are benefit for their strong red luminescence corresponding to the ⁵D₀→⁷F₂ transition.     

White-light emission from Li<Subscript>2</Subscript>Sr<Subscript>1−3<Emphasis Type="Italic">x</Emphasis>/2</Subscript>Dy<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>SiO<Subscript>4</Subscript> phosphors

Li₂Sr_1−3x/2Dy _x SiO₄ phosphors were synthesized at 900°C in the normal atmosphere by a solid-state method. The synthesized phosphors were characterized by X-ray powder diffraction (XRD) and photoluminescence (PL) spectra. The photoluminescence excitation (PLE) spectra show excitation peaks ranging from 300 to 400 nm due to the 4f-4f transitions of Dy³⁺. This mercury-free excitation is useful for solid-state lighting and light-emitting diodes (LEDs). The predominant emission of Dy³⁺ ions under 349 nm excitation is observed at 479 nm (blue) due to the ⁴F_9/2→⁶H_15/2 transitions and 572 nm (yellow) due to ⁴F_9/2→⁶H_13/2 transitions, respectively. The PL results reveal that the optimal concentration of the Dy³⁺ ions in Li₂Sr_1−3x/2Dy _x SiO₄ phosphors is x=0.03 mol. The nature of the resonance energy transfer for the Dy³⁺ ions is confirmed by Huang’s rule. Simulation of the white light excited by 349 nm near-ultraviolet (n-UV) light is also performed for its potential for white LEDs.