Micro-treatment options for components of organic fraction of MSW in residential areas

There is a growing interest in management of MSW through micro-treatment of organic fraction of municipal solid wastes (OFMSW) in many cities of India. The OFMSW fraction is high (>80%) in many pockets within South Indian cities like Bangalore, Chikkamagalur, etc. and is largely represented by vegetable, fruit, packing and garden wastes. Among these, the last three have shown problems for easy decomposition. Fruit wastes are characterized by a large pectin supported fraction that decomposes quickly to organic acids (becomes pulpy) that eventually slow down anaerobic and aerobic decomposition processes. Paper fraction (newsprint and photocopying paper) as well as paddy straw (packing), bagasse (from cane juice stalls) and tree leaf litter (typical garden waste and street sweepings) are found in reasonably large proportions in MSW. These decompose slowly due to poor nutrients or physical state. We have examined the suitability of these substrates for micro-composting in plastic bins by tracking decomposition pattern and physical changes. It was found that fruit wastes decompose rapidly to produce organic acids and large leachate fraction such that it may need to be mixed with leachate absorbing materials (dry wastes) for good composting. Leaf litter, paddy straw and bagasse decompose to the tune of 90, 68 and 60% VS and are suitable for composting micro-treatment. Paper fractions even when augmented with 10% leaf compost failed to show appreciable decomposition in 50 days. All these feedstocks were found to have good biological methane potential (BMP) and showed promise for conversion to biogas under a mixed feed operation. Suitability of this approach was verified by operating a plug-flow type anaerobic digester where only leaf litter gathered nearby (as street sweepings) was used as feedstock. Here only a third of the BMP was realized at this scale (0.18 m³ biogas/kg VS 0.55 m³/kg in BMP). We conclude that anaerobic digestion in plug-flow like digesters appear a more suitable micro-treatment option (2–10 kg VS/day) because in addition to compost it also produces biogas for domestic use nearby.     

Performance of bioreactor landfill with waste mined from a dumpsite

Emissions from landfills via leachate and gas are influenced by state and stability of the organic matter in the solid waste and the environmental conditions within the landfill. This paper describes a modified, ecologically sound waste treatment technique, where municipal solid waste is anaerobically treated in a lysimeter-scale landfill bioreactor with leachate recirculation to enhance organic degradation. The results demonstrate a substantial decrease in organic matter (BOD 99%, COD 88% and TOC 81%) and a clear decrease in nutrient concentrations especially ammonia (85%) over a period of 1 year with leachate recirculation.     

Assessment of the efficiency and economic viability of various methods of treatment of sanitary landfill leachate

This study assesses the efficiency of various physico-chemical, biological and other tertiary methods for treating leachate. An evaluation study on the treatability of the leachate from methane phase bed (MPB) reactor indicated that at an optimum hydraulic retention time of 6 days, the efficiency of the reactor in terms of biological oxygen demand (BOD) and chemical oxygen demand (COD) removal was 91.29 and 82.69%, respectively. Recycling of the treated leachate through the municipal solid waste layers in the leachate recycling unit (LRU) resulted in a significant increase in the biodegradation of organics present in the leachate. Optimum BOD and COD removal efficiencies were achieved at the third recycle; additional recycling of the leachate did not produce any significant improvement. Physico-chemical treatment of the leachate demonstrated that alum and lime (Option 2) were more economical than coagulants lime and MgCO₃. A cost analysis of the economics of the various treatments revealed that the alternative treatment consisting of a MPB bed followed by a LRU and aerated lagoon is the most cost-effective treatment. However, the alternative consisting of a MPB followed by the LRU and a soil column, which is slightly more costly, would be the most appropriate treatment when adequate land is readily available.     

COD and TOC analysis of leachate from a solidified organic waste

Several combinations of binders and absorbent additives were utilized to solidify a typical organic waste, API Separator sludge. The effectiveness of the materials was based on the waste leachability from the solidified samples. COD and TOC analyses were used to determine the organic content of the leachate samples.The ability of the COD and TOC analyses to assess waste leachability was limited. The inability of the COD and TOC tests to differentiate between organic compounds made the results difficult to interpret. This was due to organic contaminants from the solidification materials contributing to the COD and TOC contents of the leachates. Also, the COD test may have be influenced by reduced inorganic compounds contained in the flyash binder and the sludge. Representative samples for the TOC analysis were difficult to obtain for the leachates containing oils or suspended particles. It is recommended that the COD and TOC tests only be used as a screening method for determining solidified organic waste leachability and other methods need to be employed to obtain more accurate results.     

Monitoring of Ganga Water and Sediments Vis-à-Vis Tannery Pollution at Kanpur (India): A Case Study

The leather industry, besides being a major contributorto the Indian national economy, is unfortunately alsoone of the major polluters. The present articlediscusses the influence of the wastes on thephysicochemical characteristics of the Ganga water andsediments. Two sampling sites have been chosen atKanpur, the first before and the second after thepoint where tanneries are located. The samephysicochemical parameters which have been determinedin the wastes have been monitored at these two sitesfor two seasons. The results reveal that mostparameters increase as the river traverses betweenthese two points. The increase in values of parameterssuch as BOD, COD, Cl^-, and total solids could bedue to the domestic wastes just as much as to thetannery wastes. Phenols and sulfides, can also comefrom other sources, but their probability of comingfrom tanneries is higher. However, chromium is oneparameter which can primarily be identified tooriginate from the tanneries. The speciation of thesediments for chromium reveals that the leakage ofchromium into the Ganga is taking place at the secondsite. There is almost a ten fold increase in chromiumat the second site as compared to the first. At thefirst site the surface chromium is primarily in theresidual fraction while at the second site it is inthe Fe–Mn oxide fractions.     

Seasonal analysis of the generation and composition of solid waste: potential use—a case study

Ensenada health officials lack pertinent information on the sustainable management of solid waste, as do health officials from other developing countries. The aims of this research are: (a) to quantify and analyze the household solid wastes generated in the city of Ensenada, Mexico, and (b) to project biogas production and estimate generation of electrical energy. The characterization study was conducted by socioeconomic stratification in two seasonal periods, and the biogas and electrical energy projections were performed using the version 2.0 Mexico Biogas Model. Per capita solid waste generation was 0.779?±?0.019 kg per person per day within a 98 % confidence interval. Waste composition is composed mainly of food scraps at 36.25 %, followed by paper and cardboard at 21.85 %, plastic at 12.30 %, disposable diapers at 6.26 %, and textiles at 6.28 %. The maximum capacity for power generation is projected to be 1.90 MW in 2019. Waste generated could be used as an intermediate in different processes such as recycling (41.04 %) and energy recovery (46.63 %). The electrical energy that could be obtained using the biogas generated at the Ensenada sanitary landfill would provide roughly 60 % of the energy needed for street lighting.     

The potential of biogas production from municipal solid waste in a tropical climate

The objective of this study was to estimate the potential of organic municipal solid waste generated in an urban setting in a tropical climate to produce biogas. Five different categories of wastes were considered: fruit waste, food waste, yard waste, paper waste, and mixed waste. These fractions were assessed for their efficiency for biogas production in a laboratory-scale batch digester for a total period of 8 weeks at a temperature of 15–30 °C. During this period, fruit waste, food waste, yard waste, paper waste, and mixed waste were observed to produce 0.15, 0.17, 0.10, 0.08, and 0.15 m³ of biogas per kilogram of volatile solids, respectively. The biogas produced and caloric value of each feedstock was in the range of 1.25?×?10^?3 m³ (17 kWh)/cap/day (paper waste) to 15?×?10^?3 m³ (170 kWh)/cap/day (mixed waste). Paper waste produced the least (<1×10^?3(<17.8 kWh)/cap/day), and mixed waste produced the highest methane yield (10?×?10^?3 m³ (178 kWh)/cap/day). Thus, mixed waste was found to be more efficient than other feedstocks for biogas and methane production; this was mainly related to the better C/N ratio in mixed waste. Taking the total waste production in Jimma into account, the total mixed organic solid waste could produce 865?×?10³ m³ (5.4 m³/capita) of biogas or 537?×?10³ m³ (3.4 m³/capita) of methane per year. The total caloric value of methane production potential from mixed organic municipal solid waste was many times higher than the total energy requirement of the area.     

Solid waste characteristics and their relationship to gas production in tropical landfill

Solid waste characteristics and landfill gas emission rate in tropical landfill was investigated in this study. The experiment was conducted at a pilot landfill cell in Thailand where fresh and two-year-old wastes in the cell were characterized at various depths of 1.5, 3, 4.5 and 6 m. Incoming solid wastes to the landfill were mainly composed of plastic and foam (24.05%). Other major components were food wastes (16.8%) and paper (13.3%). The determination of material components in disposed wastes has shown that the major identifiable components in the wastes were plastic and foam which are resistant to biodegradation. The density of solid waste increased along the depth of the landfill from 240 kg m⁻³ at the top to 1,260 kg m⁻³ at the bottom. Reduction of volatile solids content in waste samples along the depth of landfill suggests that biodegradation of solid waste has taken place to a greater extent at the bottom of the landfill. Gas production rates obtained from anaerobic batch experiment were in agreement with field measurements showing that the rates increased along the depth of the landfill cell. They were found in range between 0.05 and 0.89 l kg⁻¹ volatile solids day⁻¹. Average emission rate of methane through the final cover soil layer was estimated as 23.95 g⁻²day⁻¹ and 1.17 g⁻²day⁻¹ during the dry and rainy seasons, respectively.     

Delineation of soil and groundwater contamination using geophysical methods at a waste disposal site in Çanakkale, Turkey

Direct current (DC) resistivity, self potential (SP) and very low frequency electromagnetic (VLF-EM) measurements are carried out to detect the spread of groundwater contamination and to locate possible pathways of leachate plumes, that resulted from an open waste disposal site of Canakkale municipality. There is no proper management of the waste disposal site in which industrial and domestic wastes were improperly dumped. Furthermore, because of the dumpsite is being located at the catchment area borders of a small creek and is being topographically at a high elevation relative to the urban area, the groundwater is expected to be hazardously contaminated. Interpretations of DC resistivity geoelectrical data showed a low resistivity zone (<5 ohm-m), which appears to be a zone, that is fully saturated with leachate from an open dumpsite. The VLF-EM and SP method, support the results of geoelectrical method relating a contaminated zone in the survey area. There is a good correlation between the geophysical investigations and the results of previously collected geochemical and hydrochemical measurements.     

Mesophilic biomethanation and treatment of poultry waste-water using pilot scale UASB reactor

The feasibility of applying the up-flow anaerobicsludge blanket (UASB) treatment for poultry waste (faeces)water was examined. A continuous-flow UASB pilot scalereactor of 3.50 L capacity using mixed culture was operatedfor 95 days to assess the treatability of poultry waste-water and its methane production. The maximum chemicaloxygen demand (COD) removed was found to be 78% whenorganic loading rate (OLR) was 2.9 kg COD m^-3 day^-1 athydraulic retention times (HRT) of 13.2 hr. The averagebiogas recovery was 0.26 m³ CH₄ kg COD with an averagemethane content of 57% at mean temperature of 30 °C.Data indicate more rapid methanogenesis with higher loadingrates and shorter hydraulic retention times. At feedconcentration of 4.8 kg COD m^-3 day^-1, anaerobic digestionwas severely retarded at all hydraulic retention timetested. This complication in the reactor operations may belinked to build-up of colloidal solids often associated withpoultry waste water and ammonia toxicity. Isolates fromgranular sludge and effluent were found to be facultativeanaerobes most of which were Pseudomonas genera.     

Resource recovery potential from secondary components of segregated municipal solid wastes

Fermentable components of municipal solid wastes (MSW) such as fruit and vegetable wastes (FVW), leaf litter, paddy straw, cane bagasse, cane trash and paper are generated in large quantities at various pockets of the city. These form potential feedstocks for decentralized biogas plants to be operated in the vicinity. We characterized the fermentation potential of six of the above MSW fractions for their suitability to be converted to biogas and anaerobic compost using the solid-state stratified bed (SSB) process in a laboratory study. FVW and leaf litter (paper mulberry leaves) decomposed almost completely while paddy straw, sugarcane trash, sugarcane bagasse and photocopying paper decomposed to a lower extent. In the SSB process between 50–60% of the biological methane potential (BMP) could be realized. Observations revealed that the SSB process needs to be adapted differently for each of the feedstocks to obtain a higher gas recovery. Bagasse produced the largest fraction of anaerobic compost (fermentation residue) and has the potential for reuse in many ways.     

基于产生来源的固体废物鉴别研究

通过对美国、欧盟和日本的固体废物定义和范围,以及已完成的固体废物鉴别实例的研究,指出固体废物鉴别的关键点在于产生来源分析。提出依据产生来源,固体废物可以分为丧失原有使用价值的物质、生产过程中产生的副产物类物质、环境治理和污染控制过程中产生的物质、其他类物质4大类。如果待鉴别物质的产生来源属于该4大产生来源中的任何一类,则其属于固体废物。     

Characterization and pollution potential assessment of Tunceli, Turkey municipal solid waste open dumping site leachates

Environmental monitoring of leachate quality from an open municipal solid waste dumping site in Tunceli, Turkey was studied in this research. The most commonly examined pollution parameters were determined on a seasonal basis. The annual average 5-day biological oxygen demand (BOD₅) and chemical oxygen demand (COD) values of station points were measured as 70 and 425 mg/L, respectively, and also the average BOD₅/COD ratio (a measure of biodegradability) was calculated as 0.20. The low ratio of biodegradability and slightly alkaline pH values in the leachate samples indicated that the site was characterized by methanogenic conditions. The mean ammonium-nitrogen (NH₄ ⁺-N) and corresponding phosphate (orthophosphate) values were assayed as 70 and 11 mg/L, respectively. The average solids content in the leachates was measured as 4,681 mg/L (total solids) and 144 mg/L (suspended solids). Very low concentrations of iron, manganese, copper, and zinc in the leachate samples were found and the concentration of cadmium was measured below detection limits. Excessive amount of nutrients and high organic and inorganic pollutant content in the leachates pose serious pollution potential to the environment. Since no drainage system or bio treatment exists in this open dumping site, high permeability of natural soil at the site and in the surrounding area and very fractured and crackled rocks under natural soil are indicators of high groundwater pollution potential in this site.     

Leachate Characterization and Assessment of Groundwater Pollution Near Municipal Solid Waste Landfill Site

Leachate and groundwater samples were collected from Gazipur landfill-site and its adjacent area to study the possible impact of leachate percolation on groundwater quality. Concentration of various physico-chemical parameters including heavy metal (Cd, Cr, Cu, Fe, Ni, Pb and Zn) and microbiological parameters (total coliform (TC) and faecal coliform (FC)) were determined in groundwater and leachate samples. The moderately high concentrations of Cl⁻, NO⁻ ₃, SO²⁻ ₄, NH⁺ ₄, Phenol, Fe, Zn and COD in groundwater, likely indicate that groundwater quality is being significantly affected by leachate percolation. Further they proved to be as tracers for groundwater contamination. The effect of depth and distance of the well from the pollution source was also investigated. The presence of TC and FC in groundwater warns for the groundwater quality and thus renders the associated aquifer unreliable for domestic water supply and other uses. Although some remedial measures are suggested to reduce further groundwater contamination via leachate percolation, the present study demand for the proper management of waste in Delhi.     

Artemia salina as test organism for assessment of acute toxicity of leachate water from landfills

Artemia salina has, for the first time, been used as test organism for acute toxicity of leachate water from three landfills (the municipal landfills at Kristianstad, Sweden and Siauliai, Lithuania, and an industrial landfill at Stena fragmenting AB, Halmstad, as well as for leachate from Kristianstad treated in different ways in a pilot plan). Artemia can tolerate the high concentrations of chloride ions found in such waters. Large differences in toxicities were found, the leachate from Siauliai being the most toxic one. To increase the selectivity in the measurements, a fractionation was done by using ion exchange to separate ammonium/ammonia and metal ions from the leachate, and activated carbon adsorbents for organic pollutants. The influence of some metals and phenol compounds on the toxicity was investigated separately. It was found that most of the toxicity emanated from the ammonium/ammonia components in the leachate. However, there was also a significant contribution from organic pollutants, other than phenol compounds, since separate experiments had in this latter case indicated negligible impact. The concentrations of metals were at a level, shown by separate experiments, where only small contribution to the toxicity could be expected.     

Assessment of water pollution in different bleaching based paper manufacturing and textile dyeing industries in India

Paper industries using different raw materials such as hard wood, bamboo, baggase, rice-straw and waste papers and bleaching chemicals like chlorine, hypochlorite, chlorine dioxide, hydrogen peroxide, sulphite and oxygen were studied to estimate organic pollution load and Adsorbable Organic Halides (AOX) per ton of production. The hard wood based paper industries generate higher Chemical Oxygen Demand (COD) loads (105–182 kg t⁻¹) and Biochemical Oxygen Demand (BOD) loads (32.0–72 kg t⁻¹) compared to the agro and waste paper based industrial effluents. The bleaching sequences such as C–EP–H–H, C–E–H–H, C–E–Do–D1 and O–Do–EOP–D1 are adopted in the paper industries and the molecular elemental chlorine free bleaching sequence discharges low AOX in the effluent. The range of AOX concentration in the final effluent from the paper industries was 0.08–0.99 kg t⁻¹ of production. Water consumption was in the range of 100–130 m³ t⁻¹ of paper production for wood based industries and 30–50 m³ for the waste paper based industries. Paper machine effluents are partially recycled after treatment and pulp mill black liquor are subject to chemical recovery after evaporation to reduce the water consumption and the total pollution loads. Hypochlorite bleaching units of textile bleaching processes generate more AOX (17.2–18.3 mg l⁻¹) and are consuming more water (45–80 l kg⁻¹) whereas alkali peroxide bleaching hardly generates the AOX in the effluents and water consumption was also comparatively less (40 l kg⁻¹ of yarn/cloth).     

Deterioration of water quality of Surma river

Surma River is polluted day by day by human activities, poor structured sewerage and drainage system, discharging industrial and household wastes. The charas (natural channels) are responsible for surface runoff conveyance from its urban catchments to the receiving Surma River. Water samples have been collected from a part of Surma River along different points and analyzed for various water quality parameters during dry and monsoon periods. Effects of industrial wastes, municipal sewage, and agricultural runoff on river water quality have been investigated. The study was conducted within the Chattak to Sunamganj portion of Surma River, which is significant due to the presence of two major industries – a paper mill and a cement factory. The other significant feature is the conveyors that travel from India to Chattak. The river was found to be highly turbid in the monsoon season. But BOD and fecal coliform concentration was found higher in the dry season. The water was found slightly acidic. The mean values of parameters were Conductivity 84–805 μs; DO: dry-5.52 mg/l, monsoon-5.72 mg/l; BOD: dry-1mg/l, monsoon-0.878 mg/l; Total Solid: dry-149.4 mg/l, monsoon-145.7 mg/l. In this study, an effort has been taken to investigate the status of concentration of phosphate (PO⁻⁴) and ammonia–nitrogen (NH₄–N) at four entrance points of Malnichara to the city, Guali chara, Gaviar khal and Bolramer khal. Data has been collected from March–April and September–October of 2004. Concentrations have been measured using UV Spectrophotometer. Although the phosphate concentration has been found within the limit set by DOE for fishing, irrigation and recreational purposes, however ammonia–nitrogen has been found to exceed the limit.     

Accounting embodied economic potential of healthcare waste recycling—a case study from Pakistan

Proper management of healthcare wastes is a key concern across resource-constrained countries in South Asia. Existing scientific research on this topic usually involves epidemiological and behavioral studies. Similarly, environmental impact assessment of healthcare wastes is mainly conducted from an end-user or anthropocentric point of view. In this study, we took a novel approach by analyzing healthcare wastes using an ecocentric position. Here, we utilize a case study of a general public hospital in a major city of Pakistan to analyze the embodied energy of its waste fractions by category. We used Emergy analysis to assess the true economic potential of recycling these waste items. While doing so, we compared the economic potential of current waste recycling practices with the scenario of 100% recycling of useful waste fractions. We discovered that the latent embodied energy of different recyclable waste fractions made them far more valuable than their existing market prices indicate. This value increased further if the useful waste fractions were completely recycled. In conclusion, this study used empirical evidence to argue in favor of source-segregation and recycling of healthcare wastes so that the higher costs associated with natural resource extraction and processing can be avoided. Future studies considering hazardous healthcare wastes can use the approach taken in this paper to analyze the impact of other practical waste treatment procedures.     

Effect of Hydrogen Peroxide on Industrial Waste Water Effluents: A Case Study of Warri Refining and Petrochemical Industry

This paper assessed the composition of waste water effluent generated by a Petrochemical industry and a treatment system developed to improve the quality of the discharge water. Parameters as pH, COD, TSS chloride and lead ions were analysed and treated comparatively using hydrogen peroxide. At pH 8.0 post treatment analysis showed a COD – 96 mg/l TSS – 48 mg/l Cl – 798.75 mg/l and Pb²⁺ – 2 mg/l for treatment D where 40 g/l of alum was used on 30% solution of H₂O₂ compared to systems A-C. Process treatment included activated clay with sodium ion resin which at pH 6.8 had COD – 52 mg/l, TSS – 10 mg/l, Cl – 510 mg/l and Pb²⁺ – 0.070 mg/l. This system has an overall efficiency of 79.0% TSS, 45.83% COD, 97.5% Pb²⁺ and 36.1% Cl reduction. Characteristics obtained for the study has a higher efficiency compared with FEPA and WHO standard for similar industrial water treatment.     

Hair from different ethnic groups vary in elemental composition and nitrogen and phosphorus mineralisation in soil

Disposal of hair wastes at landfills causes nitrate leaching to ground water, and use of the waste as fertiliser could be a viable option. This study was to determine elemental composition of major hair types in South Africa and their nitrogen (N) and phosphorus (P) release in soil. Wastes of African, White and Indian hair were obtained from local salons and analysed for carbon (C), N and sulphur (S) with the Leco CNS analyzer, and P, bases, aluminium (Al) and micronutrients, with the ICP. We also conducted an incubation study to determine changes in mineral N and P in soil. Hair wastes were added to soil at increasing rates based on N, incubated at 25 °C with destructive sampling after 0, 28, 56 and 84 days and pH, ammonium-N, nitrate-N and extractable P measured. All data were subjected to analysis of variance. Indian and White hair had higher N than African. White hair had higher C and lower potassium (K) than those of other types. The Fe levels in hair were in the order White > African > Indian, whilst those of Al were African > Indian > White. African hair had higher calcium (Ca), manganese (Mn), zinc (Zn) and cobalt (Co) than the other types. Ammonium-N and nitrate-N releases were in the order: Indian > African > White, especially at higher rates. Ammonium-N increased in the first 28 days and declined thereafter, when nitrate-N increased and pH decreased. The findings implied that hair types differ in elemental composition and nitrogen release in soil, with implications on pollution and soil fertility.