不确定非线性系统的鲁棒H∞控制分析与综合

讨论一类仿射非线性系统的鲁棒H_∞ 控制问题. 针对自由系统, 外部干扰输入矩阵和控制输入矩阵都具有加法不确定性的系统, 将鲁棒性能的分析和综合归结为求解一组Hamilton_Jacobi不等式, 给出了确保非线性控制系统满足鲁棒干扰抑制性能的充分条件, 获得了非线性鲁棒控制器的一种形式. 一个仿真例子验证了所得结论的正确性.     

直线伺服系统非线性自适应鲁棒控制器的优化设计

对永磁直线电动机伺服系统提出了非线性自适应鲁棒控制器的优化设计方法.在系统非线性数学模型的基础上,建立了误差系统的动态模型.将跟踪和干扰抑制归结为非线性自适应鲁棒控制器的设计问题,通过构造存储函数得到自适应鲁棒控制器的定理,以及电阻和电感的辨识算法.证明了定理给出的控制器能满足干扰抑制和系统渐近稳定,并用遗传算法对控制器的参数进行优化.仿真结果验证了该方法是有效的.     

直线伺服系统非线性自适应鲁棒控制器优化设计的研究

对永磁直线电动机伺服系统提出非线性自适应鲁棒控制器的优化设计方法。在永磁直线伺服系统非线性数学模型的基础上,为实现对速度和电流的准确跟踪,建立了误差系统的动态模型。将跟踪和干扰抑制归结为非线性自适应鲁棒控制器设计问题,通过构造存储函数得到自适应鲁棒控制器的定理,以及电阻和电感的辨识算法。证明定理给出的控制器能满足干扰抑制和系统的渐近稳定。最后,用遗传算法对控制器的参数进行优化。仿真结果表明,用该方法设计的系统能很好的抑制扰动和跟踪给定,满足对高性能数控机床永磁直线伺服系统控制的要求.     

基于RBF神经网络的一类不确定非线性系统自适应H控制

基于RBF神经网络提出了一种H_∞ 自适应控制方法.控制器由等效控制器和H_∞ 控制器两部分组成.用RBF神经网络逼近非线性函数,并把逼近误差引入到网络权值的自适应律中用以改善系统的动态性能.H_∞ 控制器用于减弱外部干扰及神经网络的逼近误差对跟踪的影响.所设计的控制器不仅保证了闭环系统的稳定性,而且使外部干扰及神经网络的逼近误差对跟踪的影响减小到给定的性能指标.最后给出的算例验证了该方法的有效性.     

基于不确定逼近的机械手间接自适应鲁棒预测控制

为了使机械手系统在含有模型不确定项时具有良好的跟踪性能和较强的抗干扰能力,提出了一种间接自适应鲁棒预测控制。首先,针对机械手模型设计出非线性鲁棒预测控制器;然后,基于三次样条函数逼近控制律中因模型不确定性产生的未知项,并在控制律中引入一个D-控制项抑制外部干扰。理论证明了所设计的控制器能够使跟踪误差收敛到原点。仿真验证了所提方法的有效性。     

不确定非线性系统的鲁棒H∞控制分析与综合

讨论一类仿射非线性系统的鲁棒H∞控制问题.针对自由系统,外部干扰输入矩阵和控制输入矩阵都具有加法不确定性的系统,将鲁棒性能的分析和综合归结为求解一组Hamilton-Jacobi不等式,给出了确保非线性控制系统满足鲁棒干扰抑制性能的充分条件,获得了非线性鲁棒控制器的一种形式.一个仿真例子验证了所得结论的正确性.     

模糊输出反馈实现动态不确定非线性系统的几乎干扰解耦

研究一类单输入单输出动态不确定非线性系统的几乎干扰解耦问题. 首先设计一类新型的模糊高增益观测器估计非线性系统的未知状态; 然后结合自适应模糊backstepping 控制、小增益定理和改变供能函数方法, 给出鲁棒自适应模糊控制器的设计. 所设计的控制器不仅可以保证整个闭环系统在输入到状态实际稳定意义下稳定, 同时抑制了干扰对输出的影响. 仿真结果表明了所提出控制方法的有效性.

     

一种可保证瞬态特性的改进的鲁棒模型参考自适应控制

针对典型的鲁棒模型参考自适应控制中瞬态性能无法得到保障的问题, 提出一种改进的鲁棒模型参考自适应控制器. 该控制器在标准的鲁棒自适应控制中加入??_∞ 补偿器, 以抑制闭环自适应系统中参数估计误差和不确定扰动对系统输出跟踪性能造成的不利影响. 理论分析和仿真验证表明, 所提出的控制器不但保留了典型鲁棒模型参考自适应控制的理想特性, 并且通过设计适当的??∞ 补偿器使得闭环系统的瞬态性得到了较大的改善, 其改善的程度依赖于??∞ 补偿器性能指标的大小.

     

汽轮发电机主汽门开度非线性鲁棒控制

由于外界干扰以及各种故障的影响, 电力系统的结构并不是不变的, 因此其中的一些重要参数, 如输电线路电抗等, 总是包含某种不确定性. 针对含有参数不确定性的汽轮机调速系统, 使用自适应逆推方法及Lyapunov方法设计了非线性鲁棒汽门控制器, 基于该方法的设计, 设计过程系统、简明, 且不必对原系统进行线性化, 通过对单机无穷大系统的仿真表明了该控制器的有效性.     

一种新的鲁棒自适应控制器

本文通过引入估计误差符号信息的反馈来建立一种新的鲁棒自适应控制器，能确保存在有界外部干扰时Ｌｙａｐｕｎｏｖ函数对时间的导数的半负定性，从而确保了系统的稳定性，使系统具有较强的鲁棒性，理论分析与仿真结果表明，该鲁棒自适应控制器对有界外部干扰有较强的抑制能力，并且可以加快自适应初始阶段的收敛速度。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

How do children do mathematics with LOGO?

Abstract  This paper considers some results of a study designed to investigate the kinds of mathematical activity undertaken by children (aged between 8 and 11) as they learned to program in LOGO. A model of learning modes is proposed, which attempts to describe the ways in which children used and acquired understanding of the programming/mathematical concepts involved. The remainder of the paper is concerned with discussing the validity and limitations of the model, and its implications for further research and curriculum development.