轮式移动机器人固定时间轨迹跟踪控制

针对存在外部干扰的轮式移动机器人轨迹跟踪控制问题,提出一种固定时间轨迹跟踪控制方案.首先,对于轮式移动机器人的运动学误差模型,基于一种新颖的积分滑模面设计固定时间运动学速度控制器,使跟踪误差在固定时间收敛到原点所在的邻域内;其次,对于轮式移动机器人的动力学模型,设计固定时间干扰观测器对外部干扰信息进行估计,提出一种固定时间轨迹跟踪控制器,以确保动力学系统的固定时间稳定性,实现轮式移动机器人的高精度轨迹跟踪控制;最后,通过仿真结果验证所设计的轨迹跟踪控制方案的有效性.     

基于引导角的轮式移动机器人轨迹跟踪控制

首先,基于拉格朗日方程建立移动机器人模型;然后,根据侧向误差和角度误差的关系设计引导角,将该引导角作为虚拟输入,结合Backstepping方法设计基于移动机器人运动学模型的轨迹跟踪控制律,并给出参数选取条件;最后,以驱动轮力矩作为控制输入,并考虑到机器人受到的外部扰动,将运动学控制律扩展得到基于动力学模型的控制律.仿真结果表明了所设计控制律的有效性.     

基于线性二次型算法的轮式移动机器人轨迹跟踪控制

文章在控制输入饱和约束条件下,以非完整移动机器人的运动学模型为对象,研究了移动机器人的轨迹跟踪问题.首先在参考轨迹处对运动学模型进行线性化得到移动机器人线性时变系统,证明了其能观性和能控性,在此基础上设计了饱和约束条件的分段线性二次型控制器(Piecewise Linear QuadraticRegulator,PLQR),并基于Lyapunov方法证明了其稳定性.在MATLAB软件平台下的仿真和实验结果表明,基于PLQR的轮式移动机器人对不同初始位姿及不同的参考轨迹都有较好的跟踪效果,且能够避免控制律跳变现象,满足饱和约束条件.     

基于Haar小波分解的轮式移动机器人轨迹跟踪控制

利用Haar小波在满足机器人动力学约束的前提下 ,对期望轨迹进行曲线分解 ,得到所需的一系列参考点 ,并由这些参考点构造出虚拟小车的运动轨迹 .基于控制Lyapunov函数设计了速度跟踪控制律 ,驱动机器人跟随虚拟小车实现对期望轨迹的跟踪 .该方法的突出特点是可实现对任意复杂轨迹的跟踪控制 ,且不存在速度跳跃点 .仿真实验结果表明它的有效性 .     

轮式移动机器人的数据驱动轨迹跟踪滑模约束控制

针对有输入饱和约束的轮式移动机器人(WMR)的轨迹跟踪问题,提出一种抗饱和无模型自适应积分终端滑模控制方案.该方案基于紧格式动态线性化技术,构建WMR系统的在线数据驱动模型.在积分终端滑模控制器设计过程中,引入动态抗饱和补偿器,以解决WMR系统轨迹跟踪过程中执行器饱和问题.控制器设计仅利用控制系统的输入输出数据,与WMR系统模型信息无关.因此,针对不同类型的WMR系统,该方案均可实现.最后,通过仿真实验将所提出的方法与PID方法的控制效果进行对比,仿真结果表明,所提出的控制算法的跟踪误差更小且响应速度更快.     

基于全局视觉的轮式移动机器人轨迹跟踪控制

将视觉伺服控制思想引入到全局视觉条件下的轮式移动机器人轨迹跟踪控制中,提出一种基于消除图像特征误差的控制方法.讨论并推导了包含电机模型的非完整移动机器人动力学方程,设计了鲁棒速度跟踪控制器.实验结果证明了文中方法的有效性.􀁱     

轮式移动机器人轨迹跟踪控制研究

针对轮式移动机器人参数摄动和内外部扰动等问题,提出一种新型的基于自适应扩张状态观测器的滑模控制算法。采用自适应虚拟速度控制器估计系统未知参数,滑模控制器抑制参数摄动和内外部扰动,非线性扩张状态观测器观测系统扰动并减小控制输入的抖振,实现了轨迹跟踪误差的快速收敛。利用Lyapunov稳定性理论证明了控制算法的稳定收敛性。将所提算法与传统自适应反演滑模算法进行对比,对比结果表明了所提算法的有效性和鲁棒性。     

基于RBF神经网络的轮式移动机器人轨迹跟踪控制

针对一类非完整移动机器人的轨迹跟踪控制系统,提出一种基于RBF神经网络的滑模控制与转矩控制相结合的智能控制方法。该方法同时考虑机器人运动学和动力学模型,通过RBF神经网络进行移动机器人运动过程学习,与速度误差结合构成力矩控制器,可保证闭环误差系统一致最终渐进稳定。采用基于李亚普诺夫(Lyapunov)稳定性理论的判稳方法,证明整个闭环控制系统的稳定性。仿真结果表明,该控制方案具有较强的鲁棒性。     

轮式移动机器人的位置量测输出反馈轨迹跟踪控制

针对机器人的姿态角难以精确测量的困难,本文研究基于位置测量的轮式移动机器人的轨迹跟踪问题.首先提出一种利用机器人的位置信息估计其姿态角的降维状态观测器,当机器人的线速度严格大于零时,可保证姿态角观测误差的指数收敛.然后给出一种新的状态反馈轨迹跟踪控制律,当参考轨迹满足一定的激励条件时,可以保证机器人的线速度严格大于零且跟踪误差全局渐近收敛.进一步结合姿态角观测器和状态反馈控制律,得到一种输出反馈轨迹跟踪控制算法.理论分析表明,当参考轨迹满足一定的激励条件时,所提出的输出反馈控制算法可以保证跟踪误差的全局渐近收敛.最后对所提出的姿态角观测器、状态反馈和输出反馈轨迹跟踪控制算法进行了仿真验证,证实了算法的有效性,并且当存在位置测量误差时,所提出的输出反馈轨迹跟踪控制算法仍可以保证机器人对参考轨迹的实际跟踪.     

非平衡负载下轮式移动机器人的抗扰PID控制

在非平衡负载条件下,轮式移动机器人(WMR)的前进、转向速度耦合,影响着轨迹跟踪和避障等运动控制性能.为此,本文提出了一种基于抗扰PID(DR–PID)控制器的WMR速度调节主动抗扰(ADR)控制策略.首先,建立WMR的速度耦合模型,引入解耦矩阵减小静态耦合作用;然后,基于一类改进干扰观测器(DOB)控制方法,设计一种...     

A robust adaptive fuzzy variable structure tracking control for the wheeled mobile robot: Simulation and experimental results

In this paper an adaptive fuzzy variable structure control (kinematic control) integrated with a proportional plus derivative control (dynamic control) is proposed as a robust solution to the trajectory tracking control problem for a differential wheeled mobile robot. The variable structure controller, based on the sliding mode theory, is a well known, proven control method, fit to deal with uncertainties and disturbances (e.g., structural and parameter uncertainties, external disturbances and operating limitations). To minimize the problems found in practical implementations of the classical variable structure controllers, an adaptive fuzzy logic controller replaces the discontinuous portion of the control signals (avoiding the chattering), causing the loss of invariance, but still ensuring the robustness to uncertainties and disturbances without having any a priori knowledge of their boundaries. Moreover, the adaptive fuzzy logic controller is a feasible tool to approximate any real continuous nonlinear system to arbitrary accuracy, and has a simple structure by using triangular membership functions, a low number of rules that must be evaluated, resulting in a lower computational load for execution, making it feasible for real time implementation. Stability analysis and the convergence of tracking errors as well as the adaptation laws are guaranteed with basis on the Lyapunov theory. Simulation and experimental results are explored to show the verification and validation of the proposed control strategy.     

A new adaptive tracking control scheme of wheeled mobile robot without longitudinal velocity measurement

This paper proposes a new adaptive trajectory tracking control scheme of the wheeled mobile robot without longitudinal velocity measurement. First, based on a kinematic controller, we obtain a new tracking error equation, which is suitable to develop an adaptive controller. Then, we develop a new adaptive trajectory tracking controller, which does not need any accurate values of the wheeled mobile robot parameters, including the driving motor parameters. Moreover, as the longitudinal velocity measurement is still difficult, this controller is developed without longitudinal velocity measurement. In addition, this new adaptive controller introduces a method to improve the control performance. The stability of the closed‐loop system is presented using the direct Lyapunov method. Finally, numerous simulations verify the effectiveness of the new controller.     

基于自适应和神经动力学的轮式移动机器人路径跟踪控制(英文)

本文提出一种自适应和神经动力学相结合的轮式移动机器人路径跟踪控制方法.首先,设计运动学控制器用来获得机器人期望速度;其次,考虑机器人动力学模型参数的不确定性,利用模型参考自适应方法来设计动力学控制规律,使得机器人实际速度渐近逼近期望值;再次,为克服速度和力矩的跳变,加入神经动力学模型对控制器进行优化,并且通过Lypunov理论来证明整个控制系统的稳定性;最后仿真结果表明该控制方法的有效性.     

Dual closed‐loop tracking control for wheeled mobile robots via active disturbance rejection control and model predictive control

A dual closed‐loop tracking control is proposed for a wheeled mobile robot based on active disturbance rejection control (ADRC) and model predictive control (MPC). In the inner loop system, the ADRC scheme with an extended state observer (ESO) is proposed to estimate and compensate external disturbances. In the outer loop system, the MPC strategy is developed to generate a desired velocity for the inner loop dynamic system subject to a diamond‐shaped input constraint. Both effectiveness and stability analysis are given for the ESO and the dual closed‐loop system, respectively. Simulation results demonstrate the performances of the proposed control scheme.     

Robust neural network–based tracking control and stabilization of a wheeled mobile robot with input saturation

This paper presents a robust neural network–based control scheme to deal with the problem of tracking and stabilization simultaneously for a wheeled mobile robot subject to parametric uncertainties, external disturbances, and input saturation. At first, a new error‐state transformation scheme is designed by introducing some auxiliary variables as an additional virtual control signals to reduce the adverse effect caused by the underactuation. These variables can change their structures for different desired trajectories to be tracked. Then, a robust control law is proposed combining with a kinematic controller and a dynamic controller, while a three‐layer neural network system is applied to approximate model uncertainties. Stability analysis via the Lyapunov theory shows that the proposed controller can make tracking errors converge to bounded neighborhoods of the origin. Finally, some simulation results are illustrated to verify the effectiveness of the proposed control strategy.     

双闭环策略下非完整轮式机器人鲁棒自适应运动/力协调控制

非完整轮式移动机器人的路径跟踪,需要在保证机器人姿态跟踪精度的同时,增强其地面适应性能.为实现这种运动/力的协调控制目标,本文提出双闭环的控制系统结构:外环能够增加运动精度,内环则可以增强机器人对地面动态摩阻的适应性.同时,考虑到地面摩阻的慢时变性,本文通过构造观测器对其进行估计.在具体算法实现方面,采用反步法在外环构建运动控制器:而在内环,则是应用积分型的滑模技术设计力控制器与观测器.最后,对控制系统进行仿真,仿真结果证明所提出控制方法的有效性.     

具有参数不确定性的轮式移动机器人自适应backstepping控制

针对参数不确定的轮式移动机器人的轨迹跟踪问题,设计自适应跟踪控制器.基于移动机器人的动力学模型,采用backstepping积分方法,通过逐步递推选择适当的Lyapunov函数,设计基于状态反馈的自适应控制器,并进行了相应的稳定性分析.与传统PID控制进行仿真对比,结果表明提出的自适应控制策略能较好地补偿系统参数摄动的影响,提高了移动机器人的轨迹跟踪性能和鲁棒性.     

含有驱动器模型的移动机器人自适应跟踪控制

本文针对包含驱动器模型的移动机器人, 考虑到其在粗糙表面上运动过程中所受的摩擦力以及不可建模的动态的影响, 使用反步设计法(Backstepping)给出了一种自适应跟踪控制策略.其中对于不可建模的动态, 本文使用一种非线性函数对其影响进行抵消,使得机器人的路径跟踪对不确定具有鲁棒性; 对于摩擦力项, 使用径向基神经网络(RBFNN)对其进行逼近, 在控制器中能够根据逼近值给予相应的摩擦力补偿量, 从而使移动机器人比较适合在粗糙度大的路面(如沙地)上进行路径跟踪. 仿真结果验证了该控制方法的有效性.     

An uncertainty compensator for robust control of wheeled mobile robots

This paper proposes an uncertainty compensator to design a novel robust control for mobile robots with dynamic and kinematic uncertainties. A novel gradient-based adaptive fuzzy estimator is developed to compensate uncertainties with minimum required feedback signals. As a novelty, the proposed approach uses the tracking error and its first time derivative to form the estimation error of uncertainty, and guarantees that both the estimation error and tracking error converge asymmetrically to ignorable value. Advantages of the proposed robust control are simplicity in design, robustness against uncertainties, guaranteed stability, and good control performance. The control approach is verified by stability analysis. Simulation results and experimental results illustrate the effectiveness of the proposed control. Experimental evaluation of the proposed controller is expressed for two different low-cost nonholonomic wheeled mobile robots. The proposed control design is compared with an adaptive control approach to confirm the superiority of the proposed approach in terms of precision, simplicity of design, and computations.