湿度对聚苯胺氨气传感器性能影响的研究

研究了相对湿度对聚苯胺氨气传感器性能的影响,发现相对湿度(RH)在10%~80%,氨气浓度在10~2500μL/L范围内时,聚苯胺膜对氨气的相对灵敏度随氨气浓度的增加而增加,在相同氨气浓度下响应时间随湿度的增加而变短,当氨气浓度小于400μL/L时,相对湿度则对相对灵敏度影响不大.但当氨气浓度大于500μL/L,相对湿度大于40%时,在相同氨气浓度下,随着相对湿度的增大,响应时间变短,但相对灵敏度降低.因为水分子加入后,NH3和H2O形成了大量更易于使聚苯胺去质子化的NH4OH分子,从而加快了反应速度,缩短了响应时间,而大量水分子(RH≥40%)的质子化作用降低了相对灵敏度.因此相对湿度是聚苯胺氨气传感器必须考虑的重要因素之一.     

大范围高灵敏度纳米尺度氨气传感器的制备

介绍了基于碳纳米管与聚苯胺纳米纤维的两种氨气传感器的制备与测试,综合运用两种传感器,兼顾了高灵敏度和大范围测量两项互相制约的要求.使用近场电纺技术制备单根聚苯胺纳米纤维传感器,对1×10-6氨气灵敏度达到2.7％,比较了聚苯胺纳米纤维结构和薄膜结构的响应特性.纳米纤维的立体结构可提升传感器性能.使用双向电泳技术制备碳纳米管传感器,对浓度大于20× 10-6 (V/V)的氨气有良好的线性响应.分析了主要功能材料的微结构,阐述了制备技术,比较了响应特性,分析了纤维中气体三维扩散模型,通过计算和测试值,表明响应时间与纤维直径存在反相关性.     

酞菁,酞菁铁及酞菁镍电子性质的理论研究

以双片层分子为晶体单胞模型，用量子化学具有晶体轨道的ＥＨＭＯ方法研究了酞菁、酞菁铁及酞菁镍的导电性能，讨论了碘掺杂对它的影响。计算结果表明：由于碘掺杂后，系体构型发生了较大的变化，层间作用加强，从而前述几种晶体的能隙均显著降低，电导率大幅度提高。     

酞菁镍-表面活性剂薄膜修饰电极及其催化性能的研究

将酞菁镍(NiPc)掺入阳离子表面活性剂双十二烷基二甲基溴化铵(DDAB)的氯仿溶液中,并涂布于热解石墨电极表面,待氯仿挥发后制得NiPc-DDAB薄膜电极。循环伏安实验表明,在KBr溶液中,该薄膜电极有两对良好且稳定的还原氧化峰,第一对峰的E_pc1=-0.64V,E_pa1=-0.60V(vs.SCE);第二对峰的E_pc2=-0.84V,E_pa2=-0.80V,本文着重探讨了第二对峰的电化学行为,估计了该体系的电化学参数如电子扩散系数De和非均相电极反应速率常数k^0'.该薄膜电极可用于催化各种卤代乙酸的电化学还原,用多种表面分析技术对该薄膜进行了表征。     

聚苯胺修饰的石英晶体微天平气体传感器

应用电化学方法在石英晶体微天平的金电极上修饰聚苯胺膜，用作一个气体传感器。该传感器对乙醇，苯和 氨等被测气体的频率响应表明，在含高氯酸钠的体型酸－醋酸钠缓冲中制得的聚苯胺膜，其结构有利于被测气体的响应。     

聚苯胺薄膜的溶液表面制备及室温氨气气敏性能

提出了一种基于溶液表面的聚苯胺(PANI)薄膜及气敏器件的室温制备方法,以苯胺单体、盐酸和过硫酸铵为原料通过氧化聚合在其水溶液表面直接获得质子化聚苯胺(PANI)薄膜,并利用薄膜的可转移特性构筑气敏器件.研究发现溶液的pH对PANI致密薄膜的形成至关重要,从而提出了质子化苯胺单体优先在溶液表面聚集和聚合的PANI薄膜形成机制.该薄膜气敏器件能够对NH₃进行有效的室温检测,且性能随薄膜聚合温度和聚合时间的变化呈规律性变化,优选制备条件下(pH=0.6,室温18℃,聚合60 min)的薄膜其检测下限为10^-6,响应与NH₃浓度呈良好的线性关系,并具有良好的重复性、选择性、快速响应和有竞争力的响应值.该薄膜制备工艺体现了“绿色”制备思想,且薄膜能够大面积制备并具有优异的气敏性能,有望为PANI-基薄膜的制备与室温气体传感器的研究与应用提供一种新的思路.     

酞菁镍—表面活性剂薄膜修饰电极及其催化性能的研究

将酞菁镍（ＮｉＰｃ）掺入阳离子表面活性剂双十二烷基二甲基溴化铵（ＤＤＡＢ）的氯仿溶液中，并涂布于热解石墨电极表面，待氯仿挥发后制得ＮｉＰｃ－ＤＤＡＢ薄膜电极。循环伏安实验表明，在ＫＢｒ溶液中，该薄膜电极有两对良好且稳定的还原氧化峰，第一对峰的Ｅｐｃ１＝－０．６４Ｖ，Ｅｐａｌ＝－０．６０Ｖ（ｖｓ．ＳＣＥ）；第二对峰的Ｅｐｃ２＝－０．８４Ｖ，Ｅｐａ２＝－０．８０Ｖ。本文着重探讨了第二对峰的电化学行为，     

侧链含酞菁铜功能基的聚苯胺的制备与性能研究

以酞菁铜、氯磺酸和氯化亚砜为原料合成酞菁铜磺酰氯,并将其与本征态聚苯胺进行反应,合成了侧链悬挂酞菁铜功能基的聚苯胺(PAnCuPc).用元素分析、红外光谱和紫外-可见吸收光谱对产物和反应中间体进行了结构表征.PAnCuPc可溶于强极性非质子溶剂.如NMP,DMF,DMSO和DMAc,甚至在常用的低沸点溶剂如THF和三氯甲烷中也有一定的溶解性.红外光谱研究表明,与本征态聚苯胺相比,侧链含酞菁铜功能基的聚苯胺的吸收峰向低频方向移动.紫外-可见吸收光谱表明,侧链悬挂酞菁铜功能基的聚苯胺在可见光区和近红外区都具有较强的吸收.透射电镜和X射线衍射研究表明,该产物具有较强的结晶性能.     

基于中性载体的光导纤维氨气敏传感器

用大环冠醚作为铵离子中性载体，耐尔蓝衍生物作生色质子中性载体，结合于增塑的ＰＶＣ膜中，氨气浓度变化直接引起膜的吸光值变化。基于该原理研制成功不需内电解质的光导纤维氨气敏传感器，并用于废水中氨含量测定获满意结果。     

四磺酸酞菁镍-表面活性剂薄膜电极催化性能研究

四磺酸酞菁镍阴离子(NiPcTS^-^4)在水溶液中可借助离子交换进入阳离子表面活性剂双十二烷基二甲基溴化铵(DDAB)薄膜电极, 从而形成NiPcTS^-^4-DDAB薄膜电极。循环伏安实验表明, 在KBr溶液中, 该薄膜电极有一对良好的还原氧化峰, 阴阳极峰电位分别为-0.83V和-0.74V(vs.SCE)。本文探讨了该薄膜电极的电化学行为, 测定了该体系的电化学参数如电荷传递扩散系数Dct和非均相电极反应速率常数k°'等。可将NiPcTS^-^4-DDAB薄膜电极应用于催化各种卤代乙酸的电还原, 估计并比较了它们的表观催化反应速率常数。     

Development of a Chitosan/Nickel Phthalocyanine Composite Based Conductometric Micro-sensor for Methanol Detection

Thin-film composite of chitosan/nickel phthalocyanine (NiPc) was electrochemically deposited on the fingers of interdigitated gold electrodes, applying chronoamperometric polymerization technique. The presence of crystallized NiPc in the chitosan was confirmed by EDX and FTIR analysis. Acetone, ethanol, and methanol gas-sensing properties of the films prepared at optimum conditions were studied at atmospheric temperature, through differential measurements at an optimized frequency of 10 kHz, using a lock-in amplifier. The conductometric sensor presents the highest sensitivity of 60.2 μS.cm⁻¹(v/v) for methanol and 700 ppm as the limit of detection. For validation, the methanol content of a commercial rubbing alcohol was determined.     

Electrospun Polyaniline/Poly(ethylene oxide) Composite Nanofibers Based Gas Sensor

Camphor‐10‐sulfonic acid (HCSA) doped polyaniline (PANI)/poly(ethylene oxide) (PEO) composite nanofibers with different compositions (12 to 52 wt.% of PANI) were synthesized by an electrospinning method and their properties including optical, electrical and sensing were systematically investigated. FT‐IR shows that an increase of IR absorbance ratios of aromatic C? C stretching vibration of benzenoid rings of PANI to C? O? C symmetric vibrational modes of PEO confirmed that the PANI content in nanofiber mats increased proportionally with increase in PANI content in electrospinning solution. The band gap of PANI was determined to be 2.5 eV using UV‐Vis spectroscopy. The electrical conductivities of the nanofibers increased with an increase in the PANI content in the nanofibers. Additionally, the sensitivity toward NH₃ increased as the PANI content increased, but branched nanofibers reduced sensing response. The humidity sensitivity changed from positive to negative as the PANI content increased. The electron transport mechanism was studied by measuring the temperature dependence electrical resistivity. The negative temperature coefficient of resistance revealed a semiconducting behavior for the PANI/PEO nanofibers. The activation energy, calculated by Arrhenius plot, increased as the PANI content decreased. The power law indicated that electrons were being transported in a three dimensional matrix, and the longer hopping distance required more hopping energy for electron transport.     

A Novel Electrochemical Sensor Based on Silsesquioxane/Nickel (II) Phthalocyanine for the Determination of Sulfanilamide in Clinical and Drug Samples

This paper describes the immobilization of nickel (II) phthalocyanine‐tetrasulfonic acid tetrasodium salt (NiTsPc) in 3‐n‐propyl(3‐methylpyridinium) silsesquioxane chloride (Si3Pic⁺Cl^?). This hybrid material was synthetized and characterized by ²⁹Si NMR CP‐MAS, FTIR and DRS. The modified material, designated as Si3Pic⁺Cl^?/NiTsPc, was used to build carbon paste electrodes to determine sulfanilamide (SFL) by differential pulse voltammetry. The modified electrode showed a higher current response when compared to the bare carbon paste electrode. The evaluation of SFL was possible in the presence of salicylic acid, commonly used in solid ointment compositions in a high concentration. Theoretical calculations using density functional theory were done aiming to shed light at dimerization process at SFL. The oxidation peak increased with increasing concentrations of SFL in the range of 35–301 μmol L^?1. The LOD and LOQ values obtained were 12 and 35 μmol L^?1 of SFL, respectively. The novel electrochemical sensor was successfully applied for the determination of SFL in pet drug samples, urine and serum through the standard addition method. Validation was performed through a comparison with values obtained by the molecular absorption spectrometry method and there were no significant differences in the results, as confirmed by the statistical paired t‐test. This demonstrates the promise of a new approach for analytical application in clinical and drug samples of sulfonamide compounds.     

Polyaniline Film Based Amperometric pH Sensor Using A Novel Electrochemical Measurement System

A polyaniline based amperometric pH sensor has been developed using a novel electrochemical measurement system. A polyaniline film (PANI) coated pencil graphite electrode (PGE) is connected in series between the working and counter electrodes of a potentiostat, and immersed in the solution together with a reference electrode. When an external potential is applied, the resulting current varies with the solution pH, which provides the basis for the amperoemtric pH sensor. Equations describing the measurement principle are presented. Based on pH dependent emeraldine salt–emeraldine base transition of PANI film, the pH sensor exhibits high stability, accuracy, selectivity, sensitivity and a short time.     

乙醇对双核酞菁钴掺杂聚苯胺膜修饰电极特性的影响

研究了乙醇对双核酞菁钴(b i-CoPc)掺杂聚苯胺(PAn)膜修饰电极特性的影响。用循环伏安法(CV)考察了乙醇浓度不同时,玻碳电极(GC)上双核酞菁钴掺杂聚苯胺的电聚合过程,用紫外-可见吸收光谱(UV-V is)、红外光谱(FTIR)和扫描电子显微镜(SEM)表征了在氧化铟锡玻璃(ITO)电极上b i-CoPc掺杂的PAn膜,研究了乙醇对膜以及该膜修饰电极对溶液中分子氧电催化性能的影响。结果表明,乙醇对苯胺的电聚合有促进作用,有助于增加b i-CoPc掺杂量,膜的光谱特性发生变化,表面形貌更加均匀。乙醇存在下制备的修饰电极对溶液中分子氧的电催化活性明显提高。当乙醇含量为10%时,制备的电极催化能力最强。     

Amplified Electrochemical DNA Sensor Based on Polyaniline Film and Gold Nanoparticles

In this work, an electrochemical DNA biosensor, based on a dual signal amplified strategy by employing a polyaniline film and gold nanoparticles as a sensor platform and enzyme‐linked as a label, for sensitive detection is presented. Firstly, polyaniline film and gold nanoparticles were progressively grown on graphite screen‐printed electrode surface via electropolymerization and electrochemical deposition, respectively. The sensor was characterized by scanning electron microscopy (SEM), cyclic voltammetry and impedance measurements. The polyaniline‐gold nanocomposite modified electrodes were firstly modified with a mixed monolayer of a 17‐mer thiol‐tethered DNA probe and a spacer thiol, 6‐mercapto‐1‐hexanol (MCH). An enzyme‐amplified detection scheme, based on the coupling of a streptavidin‐alkaline phosphatase conjugate and biotinylated target sequences was then applied. The enzyme catalyzed the hydrolysis of the electroinactive α‐naphthyl phosphate to α‐naphthol; this product is electroactive and has been detected by means of differential pulse voltammetry. In this way, the sensor coupled the unique electrical properties of polyaniline and gold nanoparticles (high surface area, fast heterogeneous electron transfer, chemical stability, and ease of miniaturisation) and enzymatic amplification. A linear response was obtained over a concentration range (0.2–10 nM). A detection limit of 0.1 nM was achieved.     

超微镍粒子/聚苯胺纳米复合材料制备及其表征

反相微乳液法（inverse microemulsion systems, W/O型）是制备纳米复合材料有效而简单的液相化学制备方法[1,2].     

铁酞菁/氮掺杂石墨烯复合物的电化学传感研究

本文用快速简便的方法制备了铁酞菁/氮掺杂石墨烯（FePc/N-G）修饰电极,用于定量检测半胱氨酸. 采用电化学方法对修饰电极的性能进行了表征,结果表明氮掺杂石墨烯负载铁酞菁修饰电极对半胱氨酸具有更宽的线性响应范围和较高的灵敏度.     

Application of Polyaniline Film as a Sensor for Stimulant Nerve Agents

Abstract

Methyl phosphonic dichloride (MPDC) and dimethyl methyl phosphonate (DMMP) are two important organophosphorus compounds used in the preparation of many toxic organophosphorus compounds such as nerve agents. This paper deals with the application of polyaniline coated on a glass slide surface as a sensor for the detection of some of the stimulant nerve agents such as MPDC and DMMP. The sensing behavior of polyaniline films toward MPDC and DMMP vapors via electrical conductivity changes of the polymer film using the standard four-point probe technique was investigated. The effects of the chemical concentration and the polymer thickness on the conductivity and conductivity stability of the polymer were also studied. The vapors of nerve agent stimulants affect the PANi film by the p-doping mechanism and lead to an increase in the conductivity of the polymer. The response times of the PANi film to MPDC and DMMP vapors are very fast, and the conductivity of the polymer increases with the increase in the concentration of the samples.