基于SOM算法和免疫神经网络的飞机燃油系统故障诊断

针对传统的飞机燃油系统故障诊断方法如硬件冗余方法和系统模型检测方法存在的飞机重量限制和难以建立精确数学模型的问题,设计了一种基于SOM算法和BP神经网络的故障诊断模型;首先,建立了系统故障诊断模型并对诊断原理进行了描述,然后,对故障征兆数据进行预处理,即先采用SOM算法进行连续属性离散化处理,再通过粗糙集互信息方法进行属性降维,以减少数据量和提高诊断效率;最后,建立了基于BP神经网络的故障诊断模型,为了进一步提高故障诊断精度,在采用免疫优化算法对BP神经网络故障诊断模型中的各参数即权值和阈值等进行优化的基础上,进一步采用BP反向传播算法进行参数调整,从而得到最终的故障诊断模型。通过飞机燃油系统故障诊断实例仿真实验证明了文中方法能较为精确地实现故障诊断,且与其它方法相比,具有较高的诊断精度和诊断效率,具有较大的优越性。     

基于多区域代理的分布式故障诊断方法

军用大型复杂装备组成涉及多个子系统或多个装备,故障诊断涉及上百个分散测试点数据采集和分离模块的诊断推理。传统装备采用集中测试和诊断方法,配套测试系统结构设计复杂、系统故障诊断算法效率低。本文基于D-矩阵故障诊断原理,提出基于多区域Agent的分布式故障诊断结构模型和区域Agent数据协同、区域Agent测试结果仲裁等问题的解决办法,并以某型舰船装备为例,验证了基于多区域代理的分布式故障诊断技术的有效性。     

基于改进的自适应回归时序模型故障诊断

汽车变速箱的故障诊断工作比较复杂,由于传统的诊断方法已不能满足复杂的故障现象, 文中提出了一种基于改进的自适应回归时序模型故障诊断方法;方法采用了基于时间序列故障诊断技术,首先测取工作环境下的振动信号,然后建立被诊断对象的时间序列数学模型,最后用信息距离判别法诊断出故障类型,提高了诊断效率;最后在变速箱进行了实验研究;选用型号为621B40型ICP加速度传感器测取变速箱的振动信号,通过设置模型参数(n,m)来模拟故障检测,实验分析表明,提出的算法可以有效地识别变速箱系统中不同严重程度的故障,且与传统的故障诊断算法相比,提出的算法对提高识别率和降低计算复杂度都有着明显的优势。     

基于多信号流模型的电子设备故障诊断方法

为了提高产品的可靠性,并且在电子设备发生故障时迅速地确定故障源,保障设备的正常运行,基于多信号流模型的诊断建模方法,在多信号流基础上引入了以故障重要先验知识为主的多信号流故障诊断策略,通过引入故障模式的故障概率改进了多信号流诊断技术。该方法已应用于BEPCⅡ磁铁电源接口控制设备故障诊断系统,使用TEAMS测试工具箱建模实现了快速准确的故障诊断和定位,提高了磁铁电源控制设备的故障诊断检测率和隔离率,并且可以方便地扩展到其他设备和系统上。     

基于并行禁忌神经网络和DS证据的飞机燃油系统故障诊断

飞机燃油系统是一个由许多相互联系的子系统构成的复杂总体,因而易于发生各类故障,当故障发生时会造成严重影响,为此,设计了一种基于禁忌神经网络和DS证据的飞机燃油系统故障诊断方法;首先,建立了飞机燃油系统的故障诊断模型,然后,建立了3层的BP神经网络故障诊断模型,并采用禁忌优化算法对BP神经网络进行参数优化,得到多个并行诊断的禁忌神经网络,输入样本数据对其训练并利用BP反向传播算法再次调优;最后将测试样本数据输入各禁忌神经网络,并将诊断结果作为证据采用DS证据理论进行融合,得到最终的故障诊断结果;实验结果表明:引入DS证据理论的故障诊断方法能有效克服单一故障诊断方法无法精确诊断故障的不足,诊断精度高,具有较大的优越性。     

基于小波包分解和EMD-SVM的轴承故障诊断方法

针对轴承振动信号具有的非平稳和故障诊断样本数据难以按需获取的问题,设计了一种基于小波包分解和EMD-SVM的故障诊断方法。首先,采用Mallat塔式算法对信号进行降噪,实现信号的小波分解,获得重构后的故障诊断子频带信号。然后,在经典的EMD算法的基础上定义了改进的EMD算法,采用改进的EMD算法对经过小波包降噪的故障诊断子频带信号进行特征提取,从而获得故障诊断特征向量。最后,采用适合小样本分类的SVM进行故障诊断,将经过小波包降噪和EMD特征提取的样本数据用于训练SVM,得到用于故障诊断的多个二分类SVM故障诊断模型,通过投票机制来确定样本数据最终对应的故障诊断类别。在Matlab环境下对轴承故障诊断进行实验,实验结果证明了文中基于小波包和EMD-SVM的方法一种适用于小样本的故障诊断方法,且与其它方法相比,具有诊断效率高和精度高的优点。     

复杂机载电子系统故障综合诊断技术研究

故障综合诊断技术一直是复杂机载电子系统研发过程中的关键部分,当前的故障诊断技术同时需要机内测试（BIT）和场外自动化测试设备（ATE）的测试结果才能得出诊断结果,诊断效率低,时间长并且不能在线诊断。针对新一代战斗机将更加依赖航空电子系统的趋势,迫切需要一种诊断时间短,且能够实现在线诊断的故障诊断技术。因此,一种基于模型的故障诊断方法被提出。该方法通过融合多信号模型和整数编码故障字典模型,模块间采用多信号模型,单个模块中采用整数编码故障字典模型,克服了多信号模型对测试信息的浪费和整数编码故障字典模型建模困难的缺点,并提出一种多目标测试优选方法,通过优化检测方案,充分发挥BIT的检测性能。该方法通过充分使用BIT的测试信息,摆脱了对场外ATE的依赖,实现了在线快速定位故障并识别故障模式。     

基于多信号流模型的诊断策略动态生成

针对静态故障树诊断序列长、人工可干预度差和不支持多现象并行推理问题,提出了基于D-矩阵和Rollout信息启发搜索算法的故障诊断策略动态生成方法,介绍了基于TEAMS多信号流模型的D-矩阵数据获取方法和Rollout信息启发搜索算法的DLL独立封装技术、输入输出数据规范和动态交互控制方法;基于此开发的交互式智能诊断系统(IIDS)软件平台经实际现场测试诊断验证,对诊断现场出现的多种客观条件,如系统工作模式或测试资源变化、用户干预和多故障现象并发推理等具有很好的适应性,故障覆盖率和隔离率指标高,对提高装备故障诊断的效率、准确性和灵活性具有显著作用。     

基于深度卷积网络的多传感器信号故障诊断方法研究

针对传统故障诊断方法中多传感器数据融合技术难度大、特征提取困难等问题,提出了一种基于深度卷积网络的多传感器信号故障诊断方法,通过构建测量数据帧进行卷积计算实现多通道数据的自然融合,利用深度网络结构实现高层特征的自动提取和分类,从而高效地实现了故障分类诊断;经分别采用小规模数据集REF和大规模故障数据集BI02进行实验验证,均取得了较高的故障识别准确率,具有很强的工程应用价值。     

基于多信号温度模型的机载电子板卡故障检测研究

在利用红外热像仪进行机载电子板卡故障检测中,针对电子板卡结构复杂,解析建模困难的特点,提出了一种基于多信号温度模型的分析诊断方法。通过将机载电子板卡正常工作时的红外温度图像与故障时的进行对比,建立了系统的多信号温度模型,针对多信号温度模型的缺点,提出一种基于贝叶斯网络的测试性建模方法,并给出贝叶斯网络模型的测试性分析方法与指标计算方法,得到模型相关矩阵并进一步进行故障诊断分析,为检测电子元器件故障及老化程度提供了一种有效途径。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.