Detection of Tumor Necrosis Factor Gene by Piezoelectric Nucleic Acid Sensor

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｇｅｎｅｄｉａｇｎｏｓｉｓｔｅｃｈｎｏｌｏｇｙ ,ａｌｓｏｃａｌｌｅｄｎｕｃｌｅｉｃａｃｉｄｐｒｏｂｅｔｅｃｈｎｏｌｏｇｙ ,ｈａｓｂｅｃｏｍｅａｎａｔｔｒａｃｔｉｖｅｍｅｔｈｏｄｉｎｔｈｅｆｉｅｌｄｓｏｆｂｉｏｃｈｅｍｉｓｔｒｙａｎｄｃｌｉｎｉｃａｌｍｅｄｉｃｉｎｅ .Ｉｔｉｓｐｒｏｖｅｄｔｏｂｅｃｏｎｖｅｎｉｅｎｔａｎｄｓａｆｅｕｓｉｎｇｎｏｎ ｒａｄｉｏａｃｔｉｖｅｒｅａｇｅｎｔｓｗｉｔｈｅｌｅｃｔｒｏｃｈｅｍｉｃａｌａｎｄｏｐｔｉｃａｌｄｅｔｅｃｔｏｒ.Ｅｓｐｅ ｃ…     

压电式脱氧核糖核酸传感器的研究进展

评述了压电式脱氧核糖核酸（ＤＮＡ）传感器的构成、工作原理、敏感膜的制备方法、研究进展、优缺点和发展趋势。     

MVF Sensor Enables Analysis of Nucleic Acids with Stable Secondary Structures

One major challenge in nucleic acids analysis by hybridization probes is a compromise between the probe's tight binding and sequence‐selective recognition of nucleic acid targets folded into stable secondary structures. We have been developing a four‐way junction (4WJ)‐based sensor that consists of a universal stem‐loop (USL) probe immobilized on an electrode surface and two adaptor strands (M and F). The sensor was shown to be highly selective towards single base mismatches at room temperature, able to detect multiple targets using the same USL probe, and have improved ability to detect folded nucleic acids. However, some nucleic acid targets, including natural RNA, are folded into very stable secondary and tertiary structures, which may represent a challenge even for the 4WJ sensors. This work describes a new sensor, named MVF since it uses three probe stands M, V and F, which further improves the performance of 4WJ sensors with folded targets. The MVF sensor interrogating a 16S rRNA NASBA amplicon with calculated folding energy of ?32.82 kcal/mol has demonstrated 2.5‐fold improvement in a signal‐to‐background ratio in comparison with a 4WJ sensor lacking strand V. The proposed design can be used as a general strategy in the analysis of folded nucleic acids including natural RNA.     

Microfluidic bead-based multienzyme-nanoparticle amplification for detection of circulating tumor cells in the blood using quantum dots labels

This study reports the development of a microfluidic bead-based nucleic acid sensor for sensitive detection of circulating tumor cells in blood samples using multienzyme-nanoparticle amplification and quantum dot labels. In this method, the microbeads functionalized with the capture probes and modified electron rich proteins were arrayed within a microfluidic channel as sensing elements, and the gold nanoparticles (AuNPs) functionalized with the horseradish peroxidases (HRP) and DNA probes were used as labels. Hence, two signal amplification approaches are integrated for enhancing the detection sensitivity of circulating tumor cells. First, the large surface area of Au nanoparticle carrier allows several binding events of HRP on each nanosphere. Second, enhanced mass transport capability inherent from microfluidics leads to higher capture efficiency of targets because continuous flow within micro-channel delivers fresh analyte solution to the reaction site which maintains a high concentration gradient differential to enhance mass transport. Based on the dual signal amplification strategy, the developed microfluidic bead-based nucleic acid sensor could discriminate as low as 5 fM (signal-to-noise (S/N) 3) of synthesized carcinoembryonic antigen (CEA) gene fragments and showed a 1000-fold increase in detection limit compared to the off-chip test. In addition, using spiked colorectal cancer cell lines (HT29) in the blood as a model system, the detection limit of this chip-based approach was found to be as low as 1 HT29 in 1 mL blood sample. This microfluidic bead-based nucleic acid sensor is a promising platform for disease-related nucleic acid molecules at the lowest level at their earliest incidence.     

新型超支状液晶核酸传感器用于p53突变基因的检测

基于核酸杂交链式反应影响液晶取向的原理, 构建了一种新型的超支状液晶核酸传感器用于检测p53突变基因. 本文突破传统构建超支状分子的方式, 采用杂交链式反应方法, 以目标序列p53突变基因作为引发剂, 3种不同的发卡探针Hairpin A, Hairpin B和Hairpin C为单体, 在温和的条件下, 通过改变单体的浓度和反应时间自发杂交组装形成尺寸和分子量可控的超支状DNA(branched-like DNA, bDNA). 借助捕获探针将该超支状DNA连接到液晶传感基底表面, 观察液晶分子取向改变前后的光学信号, 实现了p53基因含249密码子突变序列的快速检测. 本方法有望为核酸诊断的发展提供一种新的方法和思路.     

A Sequence‐Selective Electrochemical DNA Biosensor Based on HRP‐Labeled Probe for Colorectal Cancer DNA Detection

Abstract

A highly‐sensitive sequence‐selective DNA sensor based on HRP‐labeled probe to detect specific K‐ras gene which is highly associated with colorectal cancer has been reported. Capture probe modified with–SH was first chemically adsorbed on the gold electrode through self‐assembly. Then, the hybridization of a complementary nucleic acid (target DNA:K‐ras gene) and HRP labeled oligonucleotide detection probe occurred in a sandwich way. Finally, H₂O₂ electroreduction current catalyzed by HRP was measured amperometrically in the presence of hydroquinon as mediator. The sequence selectivity is double guaranteed by the complementary hybridization of target DNA with capture and detection probes. The experimental conditions were optimized. The linear range is 1.17×10^?11～1.17×10^?7 mol l^?1 with a detection limit of 5.85×10^?12 mol l^?1. The electrode with capture probe can be reused after regeneration in boiling water.     

Multi‐Channel Piezoelectric Quartz Crystal Sensor with Principal Component Analysis and Back‐Propagation Neural Network for Organic Pollutants from Petrochemical Plants

A multi‐channel piezoelectric quartz crystal gas sensor comprising arrays coated with various organic materials and a home‐made computer interface for data processing were prepared and employed to detect six kinds of common organic pollutants from petrochemical plants including benzene, styrene, chloroform, octane, hexene and hexyne. The principal component analysis (PCA) method was employed to select six kinds of appropriate coating materials for these organic pollutants from 22 adsorbents onto piezoelectric crystals. After performing a PCA assay, six representative coating materials, namely Polyisobutylene, Poly(dimethylsiloxane) (SE30), 4‐tert‐Butylcalix[6]arene, Cholesteryl chloroformate, C60‐Polyphenyl acetylene (C60‐PPA) and Ag(I)/cryptand‐2,2/Ethylene diamine/NH₃/Polyvinyl chloride were selected. Moreover, effects of coating load of adsorbents and concentration of pollutants were also investigated. Three kinds of recognition techniques including 2D PCA score map, radar plot and back‐propagation neural network (BPN) were employed for qualitative analysis of these organic pollutants, and a quantitative analysis method could be established by creating calibration curves for each organic pollutant. This homemade multi‐channel piezoelectric quartz crystal gas sensor showed a good detection limit of 0.068‐1.127 mg/L for these organic pollutants. The multi‐channel piezoelectric gas sensor exhibited good reproducibility with a relative standard deviation (RSD) of 1.1‐9.6%. Furthermore, this multi‐channel piezoelectric crystal detection system with BPN recognition technique was also utilized to successfully distinguish and identify each component of the mixture of organic gas samples. Multivariate linear regression (MLR) analysis was employed to quantitatively compute the concentration of species in the organic mixtures.     

Electrochemical Determination of the p53 Tumor Suppressor Gene Using a Gold Nanoparticle-Graphene Nanocomposite Modified Glassy Carbon Electrode

A novel sensitive and simple electrochemical DNA sensor is reported for the determination of p53 tumor suppressor gene. A gold nanoparticle/graphene nanocomposite-modified glassy carbon electrode was prepared and methylene blue was used as the hybridization redox indicator. Scanning electron microscopic and electrochemical characterization demonstrated that the gold nanoparticles and graphene were present on the electrode. The resulting sensor provided suitable electrochemical response to the p53 tumor suppressor gene with a linear dynamic range from 0.1 to 1000?nM. The limit of detection was 0.012?nM. The sensor was able to differentiate a complete complementary DNA sequence, single-base mismatched DNA sequence, and a three-base mismatched DNA sequence. The precision of the device was satisfactory, with a relative standard deviation of 4.1% for 11 measurements. The combination of gold nanoparticles and a graphene nanocomposite provided enhanced capabilities for the determination of DNA for clinical applications.     

Fullerene‐Crown Ether Coated Piezoelectric Crystal Liquid Chromatographic Detector for Metal Ions and Polar/Nonpolar Organic Molecules

Fullerene(C60)‐dibenzo‐16‐crown‐5‐oxyacetic acid (DBI6C5‐OCH₂‐COOC₆₀) was prepared and applied as the coating material on piezoelectric quartz crystals for detection of various metal ions and polar/nonpolar organic molecules. The C60‐crown ether‐coated piezoelectric crystal sensor with a home‐made computer interface for signal acquisition and data processing was applied as an ion chromatographic (IC) detector for various metal ions, e.g., alkali metal, alkaline earth metal and transition‐metal ions. The piezoelectric detector exhibited quite good sensitivity of 10⁴ ～ 10⁶ Hz/M and good detection limit of 10^?3 ～ 10^?4 M for these metal ions. The C60‐crown ether piezoelectric detector compared well with the commercial conductivity detector conventionally used for metal ions. The ionic size and ionic charge seemed to have significant effect on the frequency response of the piezoelectric detector. The C60‐crown ether coated piezoelectric crystal sensor was also employed as a high performance liquid chromatographic (HPLC) detector for various polar organic molecules with frequency responses in the order: amines > carboxylic acids > alcohols > ketones. Furthermore, nonpolar organic molecules, e.g., n‐hexane, 1‐hexene and 1‐hexyne, were also detected with this piezoelectric crystal detector. The frequency responses of the piezoelectric crystal detector for these nonpolar organic molecules were in the following order: alkynes > alkenes > alkanes. The effects of solvents and flow rate on the frequency responses of the piezoelectric crystal detector were investigated. The C60‐crown ether coated piezoelectric crystal detector also showed short response time (< 1 min.) and good reproducibility.     

Determination of bioelectrochemical parameters of red cell using a piezoelectric crystal sensor

Based on the impedance behavior of red cell at high frequency, the frequency response of series piezoelectric crystal sensor in the red cell suspension was derived and verified experimentally. A method of using piezoelectric crystal sensor to determine the conductivity of the interior of the cell was proposed. The experimental results show that the mean conductivity of rabbit red cell cytoplasm was 0.269 S/m and the mean shape factor of red cell was 2.05.     

Biocompatible Infinite‐Coordination‐Polymer Nanoparticle–Nucleic‐Acid Conjugates for Antisense Gene Regulation

Herein, we report the synthesis of DNA‐functionalized infinite‐coordination‐polymer (ICP) nanoparticles as biocompatible gene‐regulation agents. ICP nanoparticles were synthesized from ferric nitrate and a ditopic 3‐hydroxy‐4‐pyridinone (HOPO) ligand bearing a pendant azide. Addition of Fe^III to a solution of the ligand produced nanoparticles, which were colloidally unstable in the presence of salts. Conjugation of DNA to the Fe^III–HOPO ICP particles by copper‐free click chemistry afforded colloidally stable nucleic‐acid nanoconstructs. The DNA–ICP particles, when cross‐linked through sequence‐specific hybridization, exhibited narrow, highly cooperative melting transitions consistent with dense DNA surface loading. The ability of the DNA–ICP particles to enter cells and alter protein expression was also evaluated. Our results indicate that these novel particles carry nucleic acids into mammalian cells without the need for transfection agents and are capable of efficient gene knockdown.     

A Photoreactive G‐Quadruplex Ligand Triggered by Green Light

A photoreactive molecular dye targeting the G‐quadruplex nucleic acid (G4) of the human telomeric sequence Tel22, and several mutated analogues, was activated by green light (λ=532 nm). Highly selective covalent modification of G4 versus single‐stranded and double‐stranded DNA was achieved with efficiency up to 64 %. The phenoxyl radical was generated and detected by laser‐flash photolysis as a reactive intermediate that targeted loop thymine residues. These insights may suggest a non‐invasive tool for selective nucleic acid tagging and “pull‐down” cellular applications.     

Test method for detecting adulterated apple juice using piezoelectric resonators

The adsorption of a mixture of volatile components comprising the aroma of apple juice was studied using piezoelectric quartz microweighing. Conventional gas-chromatographic adsorbents and specific films of different natures were used to modify the electrodes of a piezoelectric sensor. The conditions of the juice analysis were optimized using a piezoelectric sensor array in the batch mode. Different samples of apple juice and nectar were analyzed under the same conditions using the piezoelectric sensor array. The quality of the samples was estimated by comparing kinetic mass aromagrams. A method was developed for the rapid estimation and assortment identification or the detection of the adulteration of natural and reconstituted apple juice.     

Determining the folding and unfolding rate constants of nucleic acids by biosensor. Application to telomere G-quadruplex

Nucleic acid molecules may fold into secondary structures, and the formation of such structures is involved in many biological processes and technical applications. The folding and unfolding rate constants define the kinetics of conformation interconversion and the stability of these structures and is important in realizing their functions. We developed a method to determine these kinetic parameters using an optical biosensor based on surface plasmon resonance. The folding and unfolding of a nucleic acid is coupled with a hybridization reaction by immobilization of the target nucleic acid on a sensor chip surface and injection of a complementary probe nucleic acid over the sensor chip surface. By monitoring the time course of duplex formation, both the folding and unfolding rate constants for the target nucleic acid and the association and dissociation rate constants for the target-probe duplex can all be derived from the same measurement. We applied this method to determine the folding and unfolding rate constants of the G-quadruplex of human telomere sequence (TTAGGG)(4) and its association and dissociation rate constants with the complementary strand (CCCTAA)(4). The results show that both the folding and unfolding occur on the time scale of minutes at physiological concentration of K(+). We speculate that this property might be important for telomere elongation. A complete set of the kinetic parameters for both of the structures allows us to study the competition between the formation of the quadruplex and the duplex. Calculations indicate that the formation of both the quadruplex and the duplex is strand concentration-dependent, and the quadruplex can be efficiently formed at low strand concentration. This property may provide the basis for the formation of the quadruplex in vivo in the presence of a complementary strand.     

Voltammetric detection of uridin diphosphate glucuronosyl transferase 1A9 (UGT1A9) gene corresponding oligonucleotide covering promoter region from −268 to −280 including (A/T) polymorphism at position −275 and optimization of the detection factors

In this study, we developed a new peptide nucleic acid (PNA) biosensor for detection of a single nucleotide polymorphism (SNP) in the UGT1A9 gene promoter region via electrochemical assay. The sensor relies on the immobilization of a 13-mer single stranded PNA probe related to the UGT1A9 gene on the Au electrode (AuE). The hybridization between the probe and its complementary sequence (DcUG275) as the target was studied by differential pulse voltammetry (DPV) of methylene blue (MB) signal. In this approach the extent of hybridization is evaluated on the basis of the difference between DPV signals of MB accumulated on the probe-AuE and MB accumulated on the probe-target-AuE. Some experimental variables affecting the performance of the biosensor including oxygen interference during the assay, probe immobilization time, probe concentration and MB accumulation time were investigated. The PNA probe modified AuE in its optimum condition was shown to be an effective sensor for the detection of hybridization and point mutations. The obtained detection limit of the utilized biosensor has been calculated as 22 nm.     

DNA Switches: From Principles to Applications

The base sequence of nucleic acid encodes structural and functional properties into the biopolymer. Structural information includes the formation of duplexes, G‐quadruplexes, i‐motif, and cooperatively stabilized assemblies. Functional information encoded in the base sequence involves the strand‐displacement process, the recognition properties by aptamers, and the catalytic functions of DNAzymes. This Review addresses the implementation of the information encoded in nucleic acids to develop DNA switches. A DNA switch is a supramolecular nucleic acid assembly that undergoes cyclic, switchable, transitions between two distinct states in the presence of appropriate triggers and counter triggers, such as pH value, metal ions/ligands, photonic and electrical stimuli. Applications of switchable DNA systems to tailor switchable DNA hydrogels, for the controlled drug‐release and for the activation of switchable enzyme cascades, are described, and future perspectives of the systems are addressed.     

DNA芯片技术与脱氧核糖核酸序列分析

人类基因组计划的实施,有力地促进了ＤＮＡ序列分析技术的发展。ＤＮＡ芯片综合运用了固相合成化学、照相平版印制技术以及激光共聚焦扫描等技术,能够同时扫描分析多基因乃至基因组,可广泛应用于基因的多态性分析、基因定位、表达水平的监测以及遗传病的诊断等领域,是对传统的ＤＮＡ分析技术的一次重大突破。本文介绍了ＤＮＡ芯片技术的基本原理并对其应用作一简要综述。     

An Electrochemical DNA Biosensor for the Detection of the Apa I Polymorphism in the Vitamin D Receptor Gene Using Meldola's Blue as a Hybridization Indicator

Electrochemical detection of nucleic acid base mismatches related to Apa I single nucleotide polymorphism (SNP) in the vitamin D receptor gene was performed successfully using 7‐dimethyl‐amino‐1,2‐benzophenoxazinium salt (Meldola's blue, MDB) with 10.9 pmol/100 μL of detection limit. MDB reduction signals obtained from probe, mismatch(probe‐SNP containing target) and hybrid(probe‐target) modified pencil graphite electrode(PGE) increased respectively. The sensor was able to clearly distinguish perfect match from mismatch DNA in a 30 min. detection time. Several factors affecting on the hybridization and indicator response are studied to maximize sensitivity and selectivity. The advantages of the biosensor are discussed in comparison with previous electrochemical assays for DNA hybridization.     

A designed locked nucleic acid-based nanopore for discriminating ctDNA and its coexisting analogue ncDNA

Circulating tumor DNA(ctDNA),carrying tumor-specific sequence mutations,is a promising biomarker for classification,diagnosis and prognosis of cancers.However,there is still a great challenge in discriminating single-base difference between ctDNA and its coexisting analogue(normal circulating DNA,ncDNA)at a serum sample.A locked nucleic acid(LNA)probe combined with a-HL nanopore sensor was designed,which achieved a high signal-to-background ratio(SBR)of^8.34 × 10^3,as well as a significant discrimination capability(~12.3 times)of single-base diffe rence.The accurate discrimination strategy is label-free,convenient,selective and sensitive,which has great potential in the early diagnosis of diseases and biomedical research fields.     

Fluorescence-based nucleic acid detection and microarrays

Recent analytical innovations for nucleic acid detection have revolutionized the biological sciences. Single nucleic acid sequence detection methods have been expanded to incorporate multiplexed detection strategies. A variety of nucleic acid detection formats are now available that can address high throughput genomic interrogation. Many of these parallel detection platforms or arrays, employ fluorescence as the signaling method. Fluorescence-based assays offer many advantages, including increased sensitivity, safety and multiplexing capabilities, as well as the ability to measure multiple fluorescence properties. Multiplexed microarray platforms provide parallel detection capabilities capable of measuring thousands of simultaneous responses. This review will discuss both single target detection and microarray applications with a focus on gene expression and pathogenic microorganism (PM) detection.