High optical transparency and low dielectric constant of novel soluble polyimides containing fluorine and trifluoromethyl groups

A novel aromatic diamine containing fluorine and trifluoromethyl groups, α-bis(4-amino-3,5-difluorophenyl)-4-(trifluoromethyl)phenylmethane (1), was synthesized. Based on diamine 1 and four aromatic dianhydrides, a series of polyimides (PI) with high fluorine content were prepared via a one-step high-temperature polycondensation procedure. These obtained PIs were readily soluble in a variety of organic solvents, and they could afford flexible and strong films with low dielectric constants (2.57–2.84 at 1 MHz) and low moisture absorptions (0.23–0.45%). Thin films of these PIs exhibited high optical transparency and light color, with the cutoff wavelength at 311–354 nm and transmittance higher than 83% at 450 nm. Moreover, these PIs possessed eminent thermal stability and good mechanical properties.     

Synthesis and characterization of novel fluorinated polyimides derived from 1,3-bis(4-amino-2-trifluoromethylphenoxy)naphthalene and aromatic dianhydrides

A new structurally asymmetric diamine monomer containing flexible ether linkages and bulky trifluoromethyl substituents, namely 1,3-bis(4-amino-2-trifluoromethylphenoxy)naphthalene, was prepared from 1,3-dihydroxynaphthalene and 2-chloro-5-nitrobenzotrifluoride. New series of fluorinated polyimides were synthesized from the diamine with six commercially available aromatic tetracarboxylic dianhydrides using a conventional two-stage process with thermal or chemical imidization. The resulting polyimides were highly soluble in a variety of organic solvents and could afford transparent and tough films via solution casting. These polyimides exhibited moderately high glass-transition temperatures (by DSC) of 236-268 °C and softening temperatures (by thermomechanical analysis) of 231-250 °C, and they did not show significant decomposition before 500 °C under either nitrogen or air atmosphere. Also, they revealed low moisture absorptions (0.32-0.78%), low dielectric constants (2.81-3.24 at 10 kHz), and high optical transparency (ultraviolet-visible absorption cutoff wavelengths of 377-426 nm).     

Synthesis and characterization of soluble polyimides derived from a novel unsymmetrical diamine monomer: 1,4-(2′,4″-diaminodiphenoxy)benzene

A new aromatic unsymmetrical diamine monomer, 1,4-(2′,4″-diaminodiphenoxy)benzene (OAPB), was successfully synthesized in three steps using hydroquinone as starting material and polymerized with various aromatic tetracarboxylic acid dianhydrides, including 4,4′-oxydiphthalic anhydride (ODPA), 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA), 2,2′-bis(3,4-dicarboxyphenyl)-hexafluoropropane dianhydride (6FDA) and pyromellitic dianhydride (PMDA) via the conventional two-step thermal or chemical imidization method to produce a series of the unsymmetrical aromatic polyimides. The polyimides were characterized by solubility tests, viscosity measurements, IR, ¹H NMR, and ¹³C NMR spectroscopy, X-ray diffraction studies, and thermogravimetric analysis. The polyimides obtained had inherent viscosities ranged of 0.38-0.58 dL/g, and were easily dissolved in common organic solvents. The resulting strong and flexible PI films exhibited excellent thermal stability with the decomposition temperature (at 5% weight loss) of above 505 °C and the glass transition temperature in the range of 230-299 °C. Moreover, the polymer films showed outstanding mechanical properties with the tensile strengths of 41.4-108.5 MPa, elongation at breaks of 5-9% and initial moduli of 1.15-1.68 GPa.     

Synthesis and properties of new pyridine-bridged poly(ether-imide)s based on 4-(4-trifluoromethylphenyl)-2,6-bis[4-(4-aminophenoxy)phenyl]pyridine

A novel pyridine-containing aromatic diamine monomer, 4-(4-trifluoromethylphenyl)-2,6-bis[4-(4-aminophenoxy)phenyl]pyridine (FAPP), was synthesized via the modified Chichibabin pyridine synthesis of 4-(4-nitrophenoxy)-acetophenone with 4-trifluoromethyl-benzaldehyde, followed by a catalytic reduction. A series of fluorinated pyridine-bridged aromatic poly(ether-imide)s were prepared from the resulting diamine monomer with various aromatic dianhydrides via a conventional two-step process. The resulting polyimides exhibited good solubility in aprotic amide solvents and m-cresol, such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, and m-cresol, etc., which possessed the inherent viscosities of 0.76-0.91 dL/g. Strong and flexible poly(ether-imide) films were obtained, which showed excellent thermal properties with the glass transition temperatures of 268-353 °C, the temperature at 5% weight loss of 547-595 °C, and the residue at 700 °C of 65-74% in nitrogen, good mechanical properties with the tensile strengths of 87.6-104.2 MPa and elongations at breakage of 8.9-12.6%, and good optical transparency with the cut-off wavelengths of 357-380 nm, as well as low dielectric constants in the range of 2.49-3.04 at 1 MHz and low water uptake 0.43-0.69%. Furthermore, the resulted polyimides derived from FAPP were compared with non-fluorinated analogous polyimides and fluorinated analogous polyimides with trifluoromethyl groups in different positions, and the effects of substituents were also investigated and discussed.     

Synthesis and properties of novel organosoluble polyimides derived from bis[3-(4-amino-2-trifluoromethylphenoxy) phenyl] ether

A new aromatic ether diamine, bis[3-(4-amino-2-trifluoromethylphenoxy) phenyl] ether, was successfully synthesized via nucleophilic substitution reaction of 3,3′-oxydiphenol and 2-chloro-5-nitrotrifluoromethylbenzene, followed by a catalytic reduction. A series of new polyimides were synthesized from the diamine with various commercially available aromatic dianhydrides via a conventional two-stage process, i.e. ring-opening polyaddition forming the poly(amic acid)s and further thermal or chemical imidization forming polyimides. The resulting polyimides exhibited good solubility in polar solvents, such as N,N-dimethylacetamide, N,N-dimethylformamide, N-methyl-2-pyrrolidinone and common solvents such as chloroform, tetrahydrofuran upon heating and possessed the inherent viscosities of 0.51-0.68 dL/g. The resulting strong and flexible films exhibited excellent thermal stability with the temperature at 10% weight loss is above 502 °C and the glass transition temperature in the range of 191-232 °C. The polyimides also were found to possess high optical transparency.     

New Soluble Polyimides with High Optical Transparency and Light Color Containing Pendant Trifluoromethyl and Methyl Groups

A new aromatic diamine containing trifluoromethyl and methyl groups, namely α,α‐bis(4‐amino‐3‐methylphenyl)‐4‐(trifluoromethyl)phenylmethane ( 1 ), was synthesized from 2‐methylaniline and 4‐(trifluoromethyl)benzaldehyde. A series of fluorinated polyimides (PIs) were prepared from the diamine with four commercially available aromatic tetracarboxylic dianhydrides using a one‐step high‐temperature polycondensation procedure. These obtained PIs showed excellent solubility, with the dissolvability at a concentration of 10 wt% in most solvents, and they could afford flexible and strong films. Thin films of these PIs exhibited high optical transparency and light color, with the cutoff wavelength at 324–357 nm and transmittance higher than 74% at 450 nm. Moreover, these PIs possessed eminent thermal stability and good mechanical properties.     

Synthesis and characterization of soluble polyimides based on a new fluorinated diamine: 4-Phenyl-2,6-bis[3-(4′-amino-2′-trifluoromethyl-phenoxy) phenyl] pyridine

A new kind of pyridine-containing aromatic diamine monomer, 4-phenyl-2,6-bis[3-(4′-amino-2′-trifluoromethyl-phenoxy) phenyl] pyridine (m-PAFP), was successfully synthesized by a modified Chichibabin reaction of 3-(4′-nitro-2′-trifluoro-methyl-phenoxy)-acetophenone with benzaldehyde, followed by a catalytic reduction. A series of fluorinated pyridine-bridged aromatic poly(ether-imide)s were prepared from the resulting diamine monomer with various aromatic dianhydrides via a conventional two-step thermal or chemical imidization method. The inherent viscosities values of these polyimides were in the range of 0.56-1.02 dL/g, and they could be cast and thermally converted into transparent, flexible, and tough polyimide films. The polyimides displayed higher solubility in polar solvents such as NMP, DMSO and m-cresol. The polyimides had good thermal stability, with the glass transition temperatures (T_g) of 187-211 °C, the temperatures at 5% weight loss of 511-532 °C, and the residue at 800 °C in air was higher than 50%. These films also had dielectric constants of 2.64-2.74 at 10 MHz and low water uptake 0.53-0.66%. Wide-angle X-ray diffraction measurements revealed that these polyimides were predominantly amorphous. Moreover, the polymer films of these novel polyimides showed outstanding mechanical properties with the tensile strengths of 90.1-96.6 MPa, elongations at breakage of 8.9-10.7% and tensile modulus of 1.65-1.98 GPa.     

Synthesis and characterization of novel fluorinated polyimides derived from 1,1′-bis(4-aminophenyl)-1-(3-trifluoromethylphenyl)-2,2,2-trifluoroethane and aromatic dianhydrides

A novel fluorinated aromatic diamine 1,1′-bis(4-aminophenyl)-1-(3-trifluoromethylphenyl)-2,2,2-trifluoroethane (6FDAM) was synthesized in a simple procedure, which was then employed to prepare a series of fluorinated polyimides with commercial aromatic dianhydrides, such as pyromellitic dianhydride (PMDA), 2,2-bis(3,4-dicarboxyphenyl)hexafluoropropane (6FDA), 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) and 4,4′-oxydiphthalic anhydride (ODPA). The polyimides exhibited good solubility in strong dipolar solvents such as NMP, DMAc, DMF and m-cresol as well as some of low boiling point organic solvents of THF and CHCl₃, etc. Experimental results indicated the polyimides possessed low moisture adsorptions of 0.42-0.95%, low dielectric constant of 2.71-2.95 at 1 MHz, high dielectric strength of 92.0-122.6 kV/mm and good optical transparency with cutoff wavelengths of UV-vis at 330-375 nm. The polyimides also exhibited good mechanical properties as well as excellent thermal and thermo-oxidative stability. The fluorinated polyimides possessed better solubility, lower dielectric constant and water adsorption as well as higher optical transparency than the representative non-fluorinated polyimide derived from PMDA and 4,4′-oxydianiline (ODA).     

Preparation and properties of thermally stable polyimides derived from asymmetric trifluoromethylated aromatic diamines and various dianhydrides

A novel method for the preparation of an asymmetric fluorinated aromatic diamine, 3,4′-bis(4-amino-2-trifluoromethylphenoxy)-benzophenone was investigated. This new diamine containing trifluoromethyl side group was synthesized from the nucleophilic substitution reaction of 2-chloro-5-nitrobenzotrifluoride and 3,4′-dihydroxybenzo phenone in the presence of potassium carbonate, followed by catalytic reduction with SnCl₂·6H₂O and concentrated hydrochloric acid. This novel diamine was used to react with different commercially available aromatic tetracarboxylic dianhydrides to prepare polyimides via thermal or chemical imidization. The polyimide properties such as inherent viscosity, solubility, thermal and surface properties were investigated to illustrate the contribution of the trifluoromethyl group and the asymmetry structure of the polyimide. The polyimides obtained had good thermal stability and the glass transition temperature values ranged from 225 to 267 °C. All of these novel polyimides held 10% weight loss at the temperature above 543 °C in air and left more than 47% residue even at 800 °C in nitrogen. The inherent viscosities of the obtained polyimides were above 0.73 dL/g and were easily dissolved in both polar, aprotic solvents and some low-boiling-point solvents. Moreover, these PI films had dielectric constants of 2.94-3.53 (1 kHz), with moisture absorption in the range of 0.07-0.34 wt%. In comparison of the PIs (5) series with the analogous symmetric PIs (6) series based on 4,4′-bis(4-amino-2-trifluoromethylphenoxy)-benzophenone, the (5) series revealed better solubility, low dielectric constant and moisture absorption.     

Electroactive aromatic polyamides and polyimides with adamantylphenoxy-substituted triphenylamine units

A new triphenylamine-containing aromatic diamine monomer, 4-[4-(1-adamantyl)phenoxy]-4′,4″-diaminotriphenylamine, was synthesized from cesium fluoride-mediated N,N-diarylation of 4-(1-adamantyl)-4′-aminodiphenyl ether with 4-fluoronitrobenzene and subsequent reduction of the resultant dinitro compound. Novel electroactive aromatic polyamides and polyimides with adamantylphenoxy-substituted triphenylamine moieties were prepared from the newly synthesized diamine monomer with aromatic dicarboxylic acids and tetracarboxylic dianhydrides, respectively. All the resulting polymers were amorphous and most of them were readily soluble in polar solvents such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc) and could be solution-cast into transparent and strong films with good mechanical properties. These polymers exhibited glass-transition temperatures between 254 and 310 °C, and they were fairly stable up to a temperature above 450 °C for the polyamides and above 500 °C for the polyimides. These polymers exhibited strong UV-vis absorption maxima at 293-346 nm in solution, and the photoluminescence spectra of polyamides showed maximum bands around 408-452 nm in the blue region. Cyclic voltammograms of the polyamide and polyimide films on an indium-tin oxide (ITO)-coated glass substrate exhibited one pair of reversible redox couples at half-wave oxidation potentials (E_1/2) around 0.83-0.86 V and 1.12-1.13 V, respectively, versus Ag/AgCl in an acetonitrile solution. All the polymer films revealed good electrochemical and electrochromic stability by repeatedly switching electrode voltages between 0.0 V and 1.1-1.4 V, with coloration change from the pale yellowish neutral state to the green or blue oxidized state.     

Synthesis and characterization of novel fluorinated polyimides derived from 4-phenyl-2,6-bis[4-(4′-amino-2′-trifluoromethyl-phenoxy)phenyl]pyridine and dianhydrides

A series of organo-soluble polyimides were prepared from a novel fluorinated diamine monomer, 4-phenyl-2,6-bis[4-(4′-amino-2′-trifluoromethylphenoxy)phenyl]pyridine and various commercial aromatic dianhydrides. These polyimides had good solubility in common organic solvents. The obtained strong and flexible PI films exhibited excellent thermal stability with the decomposition temperature (at 5% weight loss) of above 561 °C and the glass transition temperature in the range of 258-312 °C. Moreover, the polymer films showed good electrical insulating property, low dielectric constant and low water uptake due to the introduction of fluorinated substitutes in the polymer backbone. The remarkable combined features ensure these polymers to be ideal candidate materials for advanced microelectronic industry and other related applications.     

Synthesis and gas transport property of polyimide from 2,2′-disubstituted biphenyltetracarboxylic dianhydrides (BPDA)

A series of dianhydride monomers, 2,2′-disubstituted-4,4′,5,5′-biphenyltetracarboxylic dianhydride (substituents = phenoxy, p-methylphenoxy, p-tert-butylphenoxy, nitro, and methoxy) were synthesized by the nitration of an N-methyl protected 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) and subsequent aromatic nucleophilic substitutions with aroxides (NaOAr) or methoxide. These dianhydrides were polymerized with various aromatic diamines in refluxing m-cresol containing isoquinoline to afford a series of aromatic polyimides. The effects of varying 2,2′-substituents of the dianhydride (BPDA) moiety on the properties of polyimides were investigated. It was found that polyimides from the dianhydrides containing phenoxy, p-methylphenoxy, and p-tert-butylphenoxy side groups possessed excellent solubility and film forming capability whereas polyimides from 2,2′-dinitro-BPDA and 2,2′-dimethoxy-BPDA were less soluble in organic solvent. The soluble polymers formed flexible, tough and transparent films. The films had a tensile strength, elongation at break, and Young’s modulus in the ranges 102-168 MPa, 8-21%, 2.02-2.38 GPa, respectively. The polymer gas permeability coefficients (P) and ideal selectivities for N₂, O₂, CO₂ and CH₄ were determined for the -OAr substituted polyimides. The oxygen permeability coefficient (P_O2) and permselectivity of oxygen to nitrogen (P_O2/N2) of the films were in the ranges 3.4-11.3 barrer and 3.8-4.6, respectively. The gas permeability typically increased with increasing free volume in the order of tert-butylphenoxy substituted PI > methylphenoxy substituted PI > phenoxy substituted PI.     

Novel polyfluorinated polyimides derived from α,α-bis(4-amino-3,5-difluorophenyl)phenylmethane and aromatic dianhydrides: Synthesis and characterization

A novel aromatic diamine containing bulky lateral phenyl unit and fluorine groups ortho-substituted to the amino groups in the structure, α,α-bis(4-amino-3,5-difluorophenyl)phenylmethane (4FMA) was synthesized and characterized. 4FMA was polymerized with four aromatic dianhydrides to afford a series of polyimides (PIs) via a one-step high-temperature polycondensation procedure. All the PIs were amorphous and showed good solubility not only in polar aprotic solvents, but in many common solvents, such as cyclopentanone and tetrahydrofuran. The soluble polymers formed flexible, tough and transparent films. The films had a tensile strength, elongation at break, and tensile modulus in the ranges 85-107 MPa, 4-7%, 1.7-2.8 GPa, respectively. The polyimides also exhibited high-T_g (292-338 °C), good thermal stability, good dielectric strength, low dielectric constants, and low water uptakes due to the introduction of the polyfluorinated substituents in the polymer backbone. As expected, the PI films showed good transparency in the UV-Vis light region with cutoff wavelength as low as 318 nm and transmittance higher than 60% at 450 nm. PI-4 derived from 4FMA and fluorinated dianhydride 6FDA exhibited low light-absorption in the near-infrared region, especially at the optocommunication wavelength of 1310 nm and 1550 nm. The remarkable combined properties indicate their potential applications in microelectronic and optoelectronic fabrications.     

Synthesis and properties of polyimides derived from 1,7-bis(4-aminophenoxy)naphthalene and aromatic tetracarboxylic dianhydrides

The novel diamine, 1,7-bis(4-aminophenoxy)naphthalene (1,7-BAPON), was synthesized and used to prepared polyimides. 1,7-BAPON was synthesized through the nucleophilic displacement of 1,7-dihydroxynaphthalene with p-fluoronitrobenzene in the presence of K₂CO₃ followed by catalytic-reduction. Polyimides were prepared from 1,7-BAPON and various aromatic tetracarboxylic dianhydrides by the usual two-step procedure that included ring-opening polyaddition to give poly(amic acid)s, followed by cyclodehydration to polyimides. The poly(amic acid)s had inherent viscosities of 0.74-2.48 dL/g. Most of the polyimides formed tough, creasible films. These polyimides had glass transition temperatures between 247–278°C and their 10% weight loss temperatures were recorded in the range of 515–575°C in nitrogen atmosphere. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of new polyimides containing pendent pentadecyl chains

A new unsymmetrical aromatic diamine, viz., 4-pentadecylbenzene-1,3-diamine was synthesized through a series of reaction steps starting from 3-pentadecylphenol. 4-Pentadecylbenzene-1,3-diamine was employed to synthesize a series of new polyimides by one-step polycondensation in m-cresol with four commercially available aromatic dianhydrides, viz., 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA), 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA), 4,4′-oxydiphthalic anhydride (ODPA) and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6-FDA). Inherent viscosities of resulting polyimides were in the range 0.33-0.67 dL/g and number average molecular weights were in the range 14,700-52,200 (GPC, polystyrene standard). Polyimides containing pendent pentadecyl chains were soluble in organic solvents such as chloroform, m-cresol, N,N-dimethylacetamide (DMAc), 1-methyl-2-pyrrolidinone (NMP), pyridine and nitrobenzene. Strong and flexible films of polyimides could be cast from their chloroform solutions. Polyimides exhibited glass transition temperature in the range 158-206 °C. The temperature at 10% wt. loss (T₁₀), determined by TGA in nitrogen atmosphere, of polyimides was in the range 470-480 °C indicating good thermal stability.     

Syntheses and properties of aromatic polyamides and polyimides derived from 9,9-bis[4-(p-aminophenoxy)phenyl]fluorene

9,9-Bis[4-(p-aminophenoxy)phenyl]fluorene ( II ) was used as a monomer with various aromatic dicarboxylic acids and tetracarboxylic dianhydrides to synthesize polyamides and polyimides, respectively. The diamine II was derived by a nucleophilic substitution of 9,9-bis(4-hydroxyphenyl)fluorene with p-chloronitrobenzene in the presence of K₂CO₃ and then hydro-reduced. Polyamides IV _a-g having inherent viscosities of 0.73–1.39 dL/g were prepared by the direct polycondensation of the diamine II with various aromatic diacids using triphenyl phosphite and pyridine as condensing agents. All the aromatic polyamides were amorphous and readily soluble in various polar solvents such as N,N-dimethylacetamide, N,N-dimethylformamide, dimethylsulfoxide, and N-methyl-2-pyrrolidone. Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polyamides had glass transition temperatures in the range of 283–309°C and 10% weight loss occurred up to 460°C. The polyimides were synthesized from diamine II and various aromatic dianhydrides via the two-stage procedure that included ring-opening poly-addition in DMAc to give poly(amic acid)s, followed by thermal or chemical conversion to polyimides. The poly(amic acid)s had inherent viscosities of 0.62–1.78 dL/g, depending on the dianhydrides. Most of the aromatic polyimides obtained by chemical cyclization were found to be soluble in NMP. These polyimides showed almost no weight loss up to 500°C in air or nitrogen atmosphere. © 1993 John Wiley & Sons, Inc.     

Synthesis and properties of novel aromatic poly(ester-imide)s bearing 1,5-bis(benzoyloxy)naphthalene units

Two series of new aromatic poly(ester-imide)s were prepared from 1,5-bis(4-aminobenzoyloxy)naphthalene (p-1) and 1,5-bis(3-aminobenzoyloxy)naphthalene (m-1), respectively, with six commercially available aromatic tetracarboxylic dianhydrides via a conventional two-stage synthesis that included ring-opening polyaddition to give poly(amic acid)s followed by chemical imidization to polyimides. The intermediate poly(amic acid)s obtained in the first stage had inherent viscosities of 0.41-0.84 and 0.66-1.37 dl/g, respectively. All the para-series and most of the meta-series poly(ester-imide)s were semicrystalline and showed less solubility. Two of the meta-series poly(ester-imide)s derived from less rigid dianhydrides were amorphous and readily soluble in polar aprotic solvents, and they could be solution-cast into transparent and tough films with good mechanical properties. The meta-series polymers derived from rigid dianhydrides were generally semicrystalline and showed less solubility. Except for one example, the meta-series poly(ester-imide)s displayed discernible T_gs in the range 239-273 °C by DSC. All of these two series poly(ester-imide)s did not show significant decomposition below 450 °C in nitrogen or in air.     

Design,synthesis, and gas permeation properties of polyimides containing pendent imidazolium groups

Film‐forming polymers containing ionic groups have attracted considerable attention as emerging materials for gas separation applications. The aim of this article was to synthesize new film‐forming polyimides containing imidazolium groups (PI‐IMs) and establish their structure–performance relationship. In this context, a new aromatic diamine, namely, N¹‐(4‐aminophenyl)‐N¹‐(4‐(2‐phenyl‐1H‐imidazol‐1‐yl)phenyl)benzene‐1,4‐diamine (ImTPADA), was synthesized and polycondensed with three aromatic dianhydrides, namely, 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4‐(4,4‐isopropylidenediphenoxy) bis(phthalic anhydride), and 4,4′‐oxydiphthalic anhydride to form the corresponding polyimides containing pendent 2‐phenylimidazole groups (PI‐IEs). Next, PI‐IMs were prepared by N‐quaternization of pendent 2‐phenylimidazole groups present in PI‐6FDA using methyl iodide followed by anion exchange with bis(trifluoromethane)sulfonimide lithium salt (LiTf₂N). PI‐IEs and PI‐IMs exhibited reasonably high molecular weights, amorphous nature, good solubility, and could be cast into self‐standing films from their DMAc solutions. Thermogravimetric analysis showed that 10% weight loss temperature of PI‐IEs and PI‐IMs were in the range 545–475 °C and 303–306 °C, respectively. Gas permeability analysis of films of PI‐IEs and PI‐IMs was investigated by variable‐volume method and it was observed that incorporation of ionic groups into PI‐6FDA resulted in increased permeability while maintaining selectivity. In particular, polymer bearing Tf₂N⁻ anion exhibited high CO₂ permeability (33.3 Barr) and high selectivity for CO₂/CH₄ (41.1) and CO₂/N₂ (35.4). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1721–1729     

Synthesis of soluble and thermally stable polyimide from new diamine bearing N-[4-(9H-carbazol-9-yl)phenyl] formamide pendent group

A new aromatic diamine monomer, N-(4-(9H-carbazol-9-yl)phenyl)-3,5-diaminobenzamide, was successfully prepared in four steps using carbazole as starting material and polymerized with three aromatic tetracaboxylic acid dianhydrides via the conventional two-stage synthesis including the polyaddition and chemical cyclodehydration to produce a series of the aromatic polyimides. The polyimides were characterized by FT-IR, ¹H NMR, and ¹³C NMR spectroscopy, differential scanning calorimetric (DSC) and thermo gravimetric analysis (TGA) analysis. The polyimides with inherent viscosities in the range of 0.38–0.46 dL/g showed excellent solubility in various solvents such as N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), pyridine and dioxane. DSC showed the glass transition temperatures (T_g) in the range of 277–288 °C. TGA showed that all polymers were stable, with 10% weights loss recorded above 524 °C in air atmosphere. Preliminary tests on films of the polyimides indicate that the materials are brittle.     

Synthesis and properties of organosoluble polyimides based on novel perfluorinated monomer hexafluoro-2,4-toluenediamine

New highly fluorinated aromatic polyimides based on hexafluoro-2,4-toluenediamine and commercially available dianhydrides (6FDA and ODPA) were synthesized by one-pot high temperature polycondensation in benzoic acid melt. Owing to the CF₃ group and fluorine atoms in the meta-linked phenylenediamine fragment, these polyimides combine good solubility in organic solvents including such a low boiling point solvent as chloroform with high glass transition temperatures (330-345 °C), thermal and thermooxidative stability (T₅ is >500 °C). The highly fluorinated polyimide films (hydrogen content is ≤1%) exhibit good dielectric properties and low water absorption as well as excellent optical transparency in the UV-vis region (cut-off wavelength is 311 nm for 6FDA-based and 357 nm for ODPA-based polyimides), which is very important for optoelectronic materials.