The complex impact structure Serra da Cangalha,Tocantins State,Brazil

Abstract– Serra da Cangalha is a complex impact structure with a crater diameter of 13,700 m and a central uplift diameter of 5800 m. New findings of shatter cones, planar fractures, feather features, and possible planar deformation features are presented. Several ring‐like features that are visible on remote sensing imagery are caused by selective erosion of tilted strata. The target at Serra da Cangalha is composed of Devonian to Permian sedimentary rocks, mainly sandstones that are interlayered with siltstone and claystones. NNE–SSW and WNW–ESE‐striking joint sets were present prior to the impact and also overprinted the structure after its formation. As preferred zones of weakness, these joint sets partly controlled the shape of the outer perimeter of the structure and, in particular, affected the deformation within the central uplift. Joints in radial orientation to the impact center did not undergo a change in orientation during tilting of strata when the central uplift was formed. These planes were used as major displacement zones. The asymmetry of the central uplift, with preferred overturning of strata in the northern to western sector, may suggest a moderately oblique impact from a southerly direction. Buckle folding of tilted strata, as well as strata overturning, indicates that the central uplift became gravitationally unstable at the end of crater formation.     

Density and magnetic susceptibility of rocks from the Lockne and Tvären marine impact structures

Abstract— The Lockne and Tvären impact craters in Sweden formed in a marine environment during the Ordovician The contrast in density between the impact breccias and the surrounding target rock of these two craters is significantly lower than what has been found in craters formed in crystalline targets on land. Another marine‐target structure, the Estonian Kärdla structure, demonstrates intermediate contrast in impact breccia and target rock, which we attribute to the interpreted shallowness of the sea at the Kärdla impact site. We conclude that the main cause for these low‐density contrasts is pore and fracture filling of calcite with subordinate quartz and fluorite. Calcite is the most abundant cement, and its density differs most from that of fractured and brecciated bedrock with a low degree of cementation. Furthermore, from the studied cases, it is concluded that the target rock to impact rock contrast is generally the highest in craters formed on land in crystalline targets and the lowest in craters formed at sea, while craters formed on land in sedimentary targets are intermediate. The low density contrasts should decrease the negative gravity anomalies of marine craters.     

The Bow City structure,southern Alberta,Canada: The deep roots of a complex impact structure?

Geological and geophysical evidence is presented for a newly discovered, probable remnant complex impact structure. The structure, located near Bow City, southern Alberta, has no obvious morphological expression at surface. The geometry of the structure in the shallow subsurface, mapped using downhole geophysical well logs, is a semicircular structural depression approximately 8 km in diameter with a semicircular uplifted central region. Detailed subsurface mapping revealed evidence of localized duplication of stratigraphic section in the central uplift area and omission of strata within the surrounding annular region. Field mapping of outcrop confirmed an inlier of older rocks present within the center of the structure. Evidence of deformation along the eastern margin of the central uplift includes thrust faulting, folding, and steeply dipping bedding. Normal faults were mapped along the northern margin of the annular region. Isopach maps reveal that structural thickening and thinning were accommodated primarily within the Belly River Group. Evidence from legacy 2‐D seismic data is consistent with the subsurface mapping and reveals additional insight into the geometry of the structure, including a series of listric normal faults in the annular region and complex faulting within the central uplift. The absence of any ejecta blanket, breccia, suevite, or melt sheet (based on available data) is consistent with the Bow City structure being the remnant of a deeply eroded, complex impact structure. Accordingly, the Bow City structure may provide rare access and insight into zones of deformation remaining beneath an excavated transient crater in stratified siliciclastic target rocks.     

The Foelsche structure,Northern Territory,Australia: An impact crater of probable Neoproterozoic age

Abstract— The Foelsche structure is situated in the McArthur Basin of northern Australia (16°40′ S, 136°47′ E). It comprises a roughly circular outcrop of flat‐lying Neoproterozoic Bukalara Sandstone, overlying and partly rimmed by tangentially striking, discontinuous outcrops of dipping, fractured and brecciated Mesoproterozoic Limmen Sandstone. The outcrop expression coincides with a prominent circular aeromagnetic anomaly, which can be explained in terms of the local disruption and removal or displacement of a regional mafic igneous layer within a circular area at depth. Samples of red, lithic, pebbly sandstone from the stratigraphically lowest exposed levels of the Bukalara Sandstone within the Foelsche structure contain detrital quartz grains displaying mosaicism, planar fractures (PFs) and planar deformation features (PDFs). PFs and PDFs occur in multiple intersecting sets with orientations consistent with a shock metamorphic origin. The abundance and angular nature of the shocked grains indicates a nearby provenance. Surface expression and geophysical data are consistent with a partly buried complex impact crater of ?6 km in diameter with an obscured central uplift ?2 km in diameter. The deformed outcrops of Limmen Sandstone are interpreted as relics of the original crater rim, but the central region of the crater, from which the shocked grains were likely derived, remains buried. From the best available age constraints the Foelsche structure is most likely of Neoproterozoic age.     

The Haughton Impact Structure: Summary and Synthesis of the Results of the HISS Project*

Abstract— Surface and subsurface structural studies undertaken under the Haughton impact structure study (HISS) project indicate that the 23 Ma-old Haughton impact structure, (Devon Island, Canadian Arctic) consists of a central basin of uplifted strata, an inner zone of uplifted megablocks at 3.5–5.5 km radius, a complex, faulted annulus of megablocks at 5.5–7.0 km radius and an outer zone of downfaulted blocks. No evidence of a previously suggested structural multi-ring form was found. The geophysical studies suggest an original diameter of 24 km, slightly larger than previous estimates and the seismic data indicate considerably more faulting in the western portion than has been mapped from surface exposures. Detailed studies of the allochthonous breccia deposits found no major radial variations in lithology and shock levels. The only anomaly is the concentration of highly shocked, cobble-sized clasts in the central area coincident with the maximum gravity and magnetic anomalies. It is suggested that this local component is related to the highly shocked rocks of the central uplift and may have been shed from the uplift during late stage adjustments. There is no visible central topographic peak of uplifted bedrock at Haughton but studies of the post-impact Haughton Formation suggest that the center of the structure subsided 300–350 m soon after formation. Breccia studies also indicate the occurrence of shock-melted sediments, including shales, but no evidence of shock melted carbonates, the most common target lithology. This may be ascribed to the ease with which carbonates are volatilized by relatively moderate shock levels. The large amount of volatiles released on impact helped disperse the highly shocked products leading to the formation of a relatively cool clastic and polymict breccia deposit in the interior, as opposed to a coherent melt sheet. In this regard, the breccia deposit is somewhat analogous to the suevite deposits within the Ries crater. Sedimentological studies indicate that the Cretaceous-age Eureka Sound Formation was present at the time of impact and that the Haughton area has undergone as much as 200 m of erosion since the time of impact.     

Geophysical signature of the Tunnunik impact structure,Northwest Territories,Canada

In 2011, the discovery of shatter cones confirmed the 28 km diameter Tunnunik complex impact structure, Northwest Territories, Canada. This study presents the first results of ground‐based electromagnetic, gravimetric, and magnetic surveys over this impact structure. Its central area is characterized by a ~10 km wide negative gravity anomaly of about 3 mGal amplitude, roughly corresponding to the area of shatter cones, and associated with a positive magnetic field anomaly of ~120 nT amplitude and 3 km wavelength. The latter correlates well with the location of the deepest uplifted strata, an impact‐tilted Proterozoic dolomite layer of the Shaler Supergroup exposed near the center of the structure and intruded by dolerite dykes. Locally, electromagnetic field data unveil a conductive superficial formation which corresponds to an 80–100 m thick sand layer covering the impact structure. Based on the measurements of magnetic properties of rock samples, we model the source of the magnetic anomaly as the magnetic sediments of the Shaler Supergroup combined with a core of uplifted crystalline basement with enhanced magnetization. More classically, the low gravity signature is attributed to a reduction in density measured on the brecciated target rocks and to the isolated sand formations. However, the present‐day fractured zone does not extend deeper than ~1 km in our model, indicating a possible 1.5 km of erosion since the time of impact, about 430 Ma ago.     

Geology and impact features of Vargeão Dome,southern Brazil

Abstract– Vargeão Dome (southern Brazil) is a circular feature formed in lava flows of the Lower Cretaceous Serra Geral Formation and in sandstones of the Paraná Basin. Even though its impact origin was already proposed in the 1980s, little information about its geological and impact features is available in the literature. The structure has a rim‐rim diameter of approximately 12 km and comprises several ring‐like concentric features with multiple concentric lineaments. The presence of a central uplift is suggested by the occurrence of deformed sandstone strata of the Botucatu and Pirambóia formations. We present the morphological/structural characteristics of Vargeão Dome, characterize the different rock types that occur in its interior, mainly brecciated volcanic rocks (BVR) of the Serra Geral Formation, and discuss the deformation and shock features in the volcanic rocks and in sandstones. These features comprise shatter cones in sandstone and basalt, as well as planar microstructures in quartz. A geochemical comparison of the target rock equivalents from outside the structure with the shocked rocks from its interior shows that both the BVRs and the brecciated sandstone have a composition largely similar to that of the corresponding unshocked lithologies. No traces of meteoritic material have been found so far. The results confirm the impact origin of Vargeão Dome, making it one of the largest among the rare impact craters in basaltic targets known on Earth.     

The first large meteorite impact structure discovered in the Middle East: Jebel Waqf as Suwwan,Jordan

Abstract— Triggered by re‐evaluation of a 1960s report on the regional geology of the northeastern border region of Jordan and following Landsat satellite image investigation, a 5.5 km diameter, complex, circular structure was discovered in the central eastern region of the Kingdom of Jordan. Initial ground truthing revealed complex geological structures involving Upper Cretaceous and Paleogene strata, and including a prominent outer rim rising up to 60 m above the surrounding plain, an intermediate ring of up to 20 m elevation within a ring syncline, and a central zone of stratigraphically uplifted sedimentary strata characterized by intense macroscopic (folding and faulting, widespread cataclasis) and locally mesoscopic (cataclasis) deformation. Ten sites with shatter cone development in fine‐grained sandstone or limestone have been mapped to date, mostly in the outer parts of the central uplifted area. This finding confirms that the Jebel Waqf as Suwwan structure was formed as the result of the impact of an extraterrestrial projectile. Search for impact‐diagnostic micro‐deformation has been rather unsuccessful: only 1 quartz grain with both planar deformation features and planar fractures has been detected in a sandstone sample to date. The overall majority of the approximately 70 samples investigated by micropetrographic analysis consist of extremely fine‐grained chert, siltstone, or marly limestone. Cataclasis is widespread in chert and limestone, also on the micro‐scale. Considering the severely limited amount of characteristic impact microdeformation, and the stratigraphic situation within the central uplift, it is likely that a relatively deep level of the central uplift is currently exposed. The extensive drainage demonstrated for this region supports the conclusion that this impact structure could be quite deeply eroded‐especially as its geology involves some relatively soft lithologies (marls, limestones). The age of this impact event is at present poorly constrained at post‐Middle to Lower Eocene.     

Structural evolution of the 40 km wide Araguainha impact structure,central Brazil

Abstract— The 40 km wide Araguainha structure in central Brazil is a shallowly eroded impact crater that presents unique insights into the final stages of complex crater formation. The dominant structural features preserved at Araguainha relate directly to the centripetal movement of the target rocks during the collapse of the transient cavity. Slumping of the transient cavity walls resulted in inward‐verging inclined folds and a km‐scale anticline in the outer ring of the structure. The folding stage was followed by radial and concentric faulting, with downward displacement of kilometer‐scale blocks around the crater rim. The central uplift records evidence for km‐scale upward movement of crystalline basement rocks from the transient cavity floor, and lateral moment of sedimentary target rocks detached from the cavity walls. Much of the structural grain in the central uplift relates to structural stacking of km‐scale thrust sheets of sedimentary strata onto the core of crystalline basement rocks. Outward‐plunging radial folds indicate tangential oblate shortening of the strata during the imbrication of the thrust sheets. Each individual sheet records an early stage of folding and thickening due to non‐coaxial strains, shortly before sheet imbrication. We attribute this folding and thickening phase to the kilometer‐scale inward movement of the target strata from the transient cavity walls to the central uplift. The outer parts of the central uplift record additional outward movement of the target rocks, possibly related to the collapse of the central uplift. An inner ring structure at 10–12 km from the crater center marks the extent of the deformation related to the outward movement of the target rocks.     

A case study of impact‐induced hydrothermal activity: The Haughton impact structure,Devon Island,Canadian High Arctic

Abstract— The well‐preserved state and excellent exposure at the 39 Ma Haughton impact structure, 23 km in diameter, allows a clearer picture to be made of the nature and distribution of hydrothermal deposits within mid‐size complex impact craters. A moderate‐ to low‐temperature hydrothermal system was generated at Haughton by the interaction of groundwaters with the hot impact melt breccias that filled the interior of the crater. Four distinct settings and styles of hydrothermal mineralization are recognized at Haughton: a) vugs and veins within the impact melt breccias, with an increase in intensity of alteration towards the base; b) cementation of brecciated lithologies in the interior of the central uplift; c) intense veining around the heavily faulted and fractured outer margin of the central uplift; and d) hydrothermal pipe structures or gossans and mineralization along fault surfaces around the faulted crater rim. Each setting is associated with a different suite of hydrothermal minerals that were deposited at different stages in the development of the hydrothermal system. Minor, early quartz precipitation in the impact melt breccias was followed by the deposition of calcite and marcasite within cavities and fractures, plus minor celestite, barite, and fluorite. This occurred at temperatures of at least 200 °C and down to ?100–120 °C. Hydrothermal circulation through the faulted crater rim with the deposition of calcite, quartz, marcasite, and pyrite, occurred at similar temperatures. Quartz mineralization within breccias of the interior of the central uplift occurred in two distinct episodes (?250 down to ?90 °C, and <60 °C). With continued cooling (<90 °C), calcite and quartz were precipitated in vugs and veins within the impact melt breccias. Calcite veining around the outer margin of the central uplift occurred at temperatures of ?150 °C down to <60 °C. Mobilization of hydrocarbons from the country rocks occurred during formation of the higher temperature calcite veins (>80 °C). Appreciation of the structural features of impact craters has proven to be key to understanding the distribution of hydrothermal deposits at Haughton.     

Tectonics of complex crater formation as revealed by the Haughton impact structure,Devon Island,Canadian High Arctic

Abstract— The results of a systematic field mapping campaign at the Haughton impact structure have revealed new information about the tectonic evolution of mid‐size complex impact structures. These studies reveal that several structures are generated during the initial compressive outward‐directed growth of the transient cavity during the excavation stage of crater formation: (1) sub‐vertical radial faults and fractures; (2) sub‐horizontal bedding parallel detachment faults; and (3) minor concentric faults and fractures. Uplift of the transient cavity floor toward the end of the excavation stage produces a central uplift. Compressional inward‐directed deformation results in the duplication of strata along thrust faults and folds. It is notable that Haughton lacks a central topographic peak or peak ring. The gravitational collapse of transient cavity walls involves the complex interaction of a series of interconnected radial and concentric faults. While the outermost concentric faults dip in toward the crater center, the majority of the innermost faults at Haughton dip away from the center. Complex interactions between an outward‐directed collapsing central uplift and inward collapsing crater walls during the final stages of crater modification resulted in a structural ring of uplifted, intensely faulted (sub‐) vertical and/or overturned strata at a radial distance from the crater center of ?5.0–6.5 km. Converging flow during the collapse of transient cavity walls was accommodated by the formation of several structures: (1) sub‐vertical radial faults and folds; (2) positive flower structures and chaotically brecciated ridges; (3) rollover anticlines in the hanging‐walls of major listric faults; and (4) antithetic faults and crestal collapse grabens. Oblique strike‐slip (i.e., centripetal) movement along concentric faults also accommodated strain during the final stages of readjustment during the crater modification stage. It is clear that deformation during collapse of the transient cavity walls at Haughton was brittle and localized along discrete fault planes separating kilometer‐size blocks.     

Post‐impact structural crater modification due to sediment loading: An overlooked process

Abstract— Post‐impact crater morphology and structure modifications due to sediment loading are analyzed in detail and exemplified in five well‐preserved impact craters: Mjølnir, Chesapeake Bay, Chicxulub, Montagnais, and Bosumtwi. The analysis demonstrates that the geometry and the structural and stratigraphic relations of post‐impact strata provide information about the amplitude, the spatial distribution, and the mode of post‐impact deformation. Reconstruction of the original morphology and structure for the Mjølnir, Chicxulub, and Bosumtwi craters demonstrates the long‐term subsidence and differential compaction that takes place between the crater and the outside platform region, and laterally within the crater structure. At Mjølnir, the central high developed as a prominent feature during post‐impact burial, the height of the peak ring was enhanced, and the cumulative throw on the rim faults was increased. The original Chicxulub crater exhibited considerably less prominent peak‐ring and inner‐ring/crater‐rim features than the present crater. The original relief of the peak ring was on the order of 420–570 m (currently 535–575 m); the relief on the inner ring/crater rim was 300–450 m (currently ?700 m). The original Bosumtwi crater exhibited a central uplift/high whose structural relief increased during burial (current height 101–110 m, in contrast to the original height of 85–110 m), whereas the surrounding western part of the annular trough was subdued more that the eastern part, exhibiting original depths of 43–68 m (currently 46 m) and 49–55 m (currently 50 m), respectively. Furthermore, a quantitative model for the porosity change caused by the Chesapeake Bay impact was developed utilizing the modeled density distribution. The model shows that, compared with the surrounding platform, the porosity increased immediately after impact up to 8.5% in the collapsed and brecciated crater center (currently +6% due to post‐impact compaction). In contrast, porosity decreased by 2–3% (currently ?3 to ?4.5% due to post‐impact compaction) in the peak‐ring region. The lateral variations in porosity at Chesapeake Bay crater are compatible with similar porosity variations at Mjølnir crater, and are considered to be responsible for the moderate Chesapeake Bay gravity signature (annular low of ?8 mGal instead of ?15 mGal). The analysis shows that the reconstructions and the long‐term alterations due to post‐impact burial are closely related to the impact‐disturbed target‐rock volume and a brecciated region of laterally varying thickness and depth‐varying physical properties. The study further shows that several crater morphological and structural parameters are prone to post‐impact burial modification and are either exaggerated or subdued during post‐impact burial. Preliminary correction factors are established based on the integrated reconstruction and post‐impact deformation analysis. The crater morphological and structural parameters, corrected from post‐impact loading and modification effects, can be used to better constrain cratering scaling law estimates and impact‐related consequences.     

Impact into unconsolidated,water-rich sediments at the Marquez Dome,Texas

Abstract— The Marquez Dome, Leon County, Texas represents a 13 km diameter Paleocene/Eocene impact structure formed in largely unconsolidated sediments in a near-shore environment. The present study is an analysis of samples from cores taken from boreholes drilled separately on the edge of the central uplift and in the surrounding annular basin. The borehole drilled in the annular basin of the structure penetrated a sequence of interbedded sands, silts, and shales that is typical of the stratigraphy of the surrounding area. In contrast, the borehole drilled on the edge of the central uplift penetrated material that is relatively homogeneous in chemical composition and texture and may represent a mixture of sand, silt, clay, and minor carbonate derived from deeper levels in the preimpact stratigraphy. Veins containing pseudotachylitic breccias are not found and are not expected in this environment because low-strength target materials are not conducive to frictional melting. Similarly, the low strength and unconsolidated nature of these target materials are not conducive to the formation of other types of typical impact breccias (e.g., melt rocks or suevites). The absence of such lithologies results either from explosive ejection of these materials caused by the water-rich character of the target sediments or, more probably, from removal of these materials by deeper postimpact erosion than has been suggested previously. Planar deformation features (PDFs) were not found in quartz grains from any of these samples. The scarcity of quartz grains with PDFs, which have only been reported in rare impact breccias from the central uplift, and the large amount of vertical displacement indicated for the central uplift of this structure may also be a consequence of the low strength of target materials.     

Geophysical research on the Kärdla impact structure,Hiiumaa Island,Estonia

Abstract— The 4 km wide and 500 m deep circular Kärdla impact structure in Hiiumaa Island, Estonia, of middle Ordovician age (～455 Ma), is buried under Upper Ordovician and Quaternary sediments. To constrain the geophysical models of the structure, petrophysical properties such as magnetic susceptibility, natural remanent magnetization (NRM), density, electrical conductivity, porosity and P-wave velocity were measured on samples of crystalline and sedimentary rocks collected from drill cores in different parts of the structure and the surrounding area. The results were used to interpret the central gravity anomaly of ?3 mGal and the magnetic anomaly of ?100 nT and also the surrounding weak positive anomalies revealed by high precision survey data. The unshocked granitic rocks outside the structure have a mean density of ～2630 kgm^?3. Their shocked counterparts have densities of ～2400 kgm^?3 at a depth of ～500 m, increasing up to 2550 kgm^?3 at a depth of 850 m. Porosity and electrical conductivity decrease, but P-wave velocity increases as density increases away from the impact point. Thus, the gradual changes in the physical properties of the rocks as a function of radial distance from the crater centre are consistent with an impact origin for Kärdla. As in many other impact structures, the magnetization of the shocked rocks are also clearly lower than those of unshocked target rocks. A new geophysical and geological model of the Kärdla structure is presented based on geophysical field measurements and data on gradual changes in petrophysical parameters of the shocked target and overlying rocks, together with structural data from numerous boreholes. An important feature of this model is the lack of an observable geophysical signature of the central uplift observed in drillcores.     

Impact tectonics in the core of the Vredefort dome,South Africa: Implications for central uplift formation in very large impact structures

Abstract— The 80 km wide Vredefort dome presents a unique opportunity to investigate the deep levels of the central uplift of a very large impact structure. Exposure of progressively older strata in the collar of the dome and of progressively higher‐grade metamorphic rocks toward its center is consistent with differential uplift; however, the deepest levels exposed correspond to pre‐impact midcrust, rather than lower crust, as has been suggested previously. Pre‐impact Archean gneissic fabrics in the core of the dome are differentially rotated, with the angle of rotation increasing sharply at a distance of ?16–19 km from the center. The present asymmetric dips of the collar strata, with layering dipping outward at moderate angles in the southeastern sector but being overturned and dipping inward in the northwestern sector, and the eccentric distribution of the pre‐impact metamorphic isograds around the core of the dome can be reconciled with symmetric rotation of an initially obliquely NW‐dipping target sequence during central uplift formation. The rocks in the core of the dome lack distinctive megablocks or large‐slip‐magnitude faults such as have been described in other central uplifts. We suggest that the large‐scale coherent response of these rocks to the central uplift formation could have been accommodated by small‐scale shear and/or rotation along pervasive pseudotachylitic breccia vein‐fractures.     

Shatter cones and planar deformation features confirm Santa Marta in Piauí State,Brazil, as an impact structure

A total of 184 confirmed impact structures are known on Earth to date, as registered by the Earth Impact Database . The discovery of new impact structures has progressed in recent years at a rather low rate of about two structures per year. Here, we introduce the discovery of the approximately 10 km diameter Santa Marta impact structure in Piauí State in northeastern Brazil. Santa Marta is a moderately sized complex crater structure, with a raised rim and an off‐center, approximately 3.2 km wide central elevated area interpreted to coincide with the central uplift of the impact structure. The Santa Marta structure was first recognized in remote sensing imagery and, later, by distinct gravity and magnetic anomalies. Here, we provide results obtained during the first detailed ground survey. The Bouguer anomaly map shows a transition from a positive to a negative anomaly within the structure along a NE–SW trend, which may be associated with the basement signature and in parts with the signature developed after the crater was formed. Macroscopic evidence for impact in the form of shatter cones has been found in situ at the base around the central elevated plateau, and also in the interior of fractured conglomerate boulders occurring on the floor of the surrounding annular basin. Planar deformation features (PDFs) are abundant in sandstones of the central elevated plateau and at scattered locations in the inner part of the ring syncline. Together, shatter cones and PDFs provide definitive shock evidence that confirms the impact origin of Santa Marta. Crystallographic orientations of PDFs occurring in multiple sets in quartz grains are indicative of peak shock pressures of 20–25 GPa in the rocks exposed at present in the interior of the crater. In contrast to recent studies that have used additional, and sometimes highly controversial, alleged shock recognition features, Santa Marta was identified based on well‐understood, traditional shock evidence.     

Newly identified “Tunnunik” impact structure,Prince Albert Peninsula,northwestern Victoria Island,Arctic Canada

Regional geological mapping of the glaciated surface of northwestern Victoria Island in the western Canadian Arctic revealed an anomalous structure in otherwise flat‐lying Neoproterozoic and lower Paleozoic carbonate rocks, located south of Richard Collinson Inlet. The feature is roughly circular in plan view, approximately 25 km in diameter, and characterized by quaquaversal dips of approximately 45°, decreasing laterally. The core of the feature also exhibits local vertical dips, low‐angle reverse faults, and drag folds. Although brecciation was not observed, shatter cones are pervasive in all lithologies in the central area, including 723 Ma old dikes that penetrate Neoproterozoic limestones. Their abundance decreases distally, and none was observed in surrounding, horizontally bedded strata. This circular structure is interpreted as a deeply eroded meteorite impact crater of the complex type, and the dipping strata as the remnants of the central uplift. The variation in orientation and shape of shatter cones point to variably oriented stresses with the passage of the shock wave, possibly related to the presence of pore water in the target strata as well as rock type and lithological heterogeneities, especially bed thickness. Timing of impact is poorly constrained. The youngest rocks affected are Late Ordovician (approximately 450 Ma) and the impact structure is mantled by undisturbed postglacial sediments. Regional, hydrothermal dolomitization of the Ordovician limestones, possibly in the Late Devonian (approximately 360 Ma), took place before the impact, and widespread WSW–ENE‐trending normal faults of probable Early Cretaceous age (approximately 130 Ma) apparently cross‐cut the impact structure.     

Hornblende alteration and fluid inclusions in Kärdla impact crater,Estonia: Evidence for impact‐induced hydrothermal activity

Abstract— The well‐preserved Kärdla impact crater, on Hiiumaa Island, Estonia, is a 4 km diameter structure formed in a shallow Ordovician sea ?455 Ma ago into a target composed of thin (?150 m) unconsolidated sedimentary layer above a crystalline basement composed of migmatite granites, amphibolites and gneisses. The fractured and crushed amphibolites in the crater area are strongly altered and replaced with secondary chloritic minerals. The most intensive chloritization is found in permeable breccias and heavily shattered basement around and above the central uplift. Alteration is believed to have resulted from convective flow of hydrothermal fluids through the central areas of the crater. Chloritic mineral associations suggest formation temperatures of 100–300 °C, in agreement with the most frequent quartz fluid inclusion homogenization temperatures of 150–300 °C in allochthonous breccia. The rather low salinity of fluids in Kärdla crater (<13 wt% NaCl_eq) suggests that the hydrothermal system was recharged either by infiltration of meteoric waters from the crater rim walls raised above sea level after the impact, or by invasion of sea water through the disturbed sedimentary cover and fractured crystalline basement. The well‐developed hydrothermal system in Kärdla crater shows that the thermal history of the shock‐heated and uplifted rocks in the central crater area, rather than cooling of impact melt or suevite sheets, controlled the distribution and intensity of the impact‐induced hydrothermal processes.     

Ash Shutbah: A possible impact structure in Saudi Arabia

We have investigated the Ash Shutbah circular structure in central Saudi Arabia (21°37′N 45°39′E) using satellite imagery, field mapping, thin‐section petrography, and X‐ray diffraction of collected samples. The approximately 2.1 km sized structure located in flat‐lying Jurassic Tuwaiq Mountain Limestone has been nearly peneplained by erosional processes. Satellite and structural data show a central area consisting of Dhruma Formation sandstones with steep bedding and tight folds plunging radially outward. Open folding occurs in displaced, younger Tuwaiq Mountain Limestone Formation blocks surrounding the central area, but is absent outside the circular structure. An approximately 60 cm thick, unique folded and disrupted orthoquartzitic sandstone marker bed occurring in the central area of the structure is found 140 m deeper in undisturbed escarpment outcrops located a few hundred meters west of the structure. With exception of a possible concave shatter cone found in the orthoquartzite of the central area, other diagnostic shock features are lacking. Some quartz‐rich sandstones from the central area show pervasive fracturing of quartz grains with common concussion fractures. This deformation was followed by an event of quartz dissolution and calcite precipitation consistent with local sea‐ or groundwater heating. The combination of central stratigraphic uplift of 140 m, concussion features in discolored sandstone, outward‐dipping concentric folds in the central area, deformation restricted to the rocks of the ring structure, a complex circular structure of 2.1 km diameter that appears broadly consistent with what one would expect from an impact structure in sedimentary targets, and a possible shatter cone all point to an impact origin of the Ash Shutbah structure. In fact, the Ash Shutbah structure appears to be a textbook example of an eroded, complex impact crater located in flat‐lying sedimentary rocks, where the undisturbed stratigraphic section can be studied in escarpment outcrops in the vicinity of the structure.     

Petrography,geochemistry, and argon‐40/argon‐39 ages of impact‐melt rocks and breccias from the Ames impact structure,Oklahoma: The Nicor Chestnut 18‐4 drill core

Abstract— The 15 km diameter Ames structure in northwestern Oklahoma is located 2.75 km below surface in Cambro‐Ordovician Arbuckle dolomite, which is overlain by Middle Ordovician Oil Creek Formation shale. The feature is marked by two concentric ring structures, with the inner ring of about 5 km diameter probably representing the collapsed remnant of a structural uplift composed of brecciated Precambrian granite and Arbuckle dolomite. Wells from both the crater rim and the central uplift are oil‐ and gas‐producing, making Ames one of the economically important impact structures. Petrographic, geochemical, and age data were obtained on samples from the Nicor Chestnut 18‐4 drill core, off the northwest flank of the central uplift. These samples represent the largest and best examples of impact‐melt breccia obtained so far from the Ames structure. They contain carbonate rocks, which are derived from the target sequence. The chemical composition of the impact‐melt breccias is similar to that of target granite, with variable carbonate admixture. Some impact‐melt rocks are enriched in siderophile elements indicating the possible presence of a meteoritic component. Based on stratigraphic arguments, the age of the crater was estimated at 470 Ma. Previous ⁴⁰Ar‐³⁹Ar dating attempts of impact‐melt breccias from the Dorothy 1–19 core yielded plateau ages of about 285 Ma, which is in conflict with the stratigraphic age. The new ⁴⁰Ar‐³⁹Ar age data obtained on the melt breccias from the Nicor Chestnut core by ultraviolet (UV) laser spot analysis resulted in a range of ages with maxima around 300 Ma. These data could reflect processes related either the regional Nemaha Uplift or resetting due to hot brines active on a midcontinent‐wide scale, perhaps related to the Alleghenian and Ouachita orogenies. The age data indicate an extended burial phase associated with thermal overprint during Late Pennsylvanian‐Permian.