Source parameter and rupture process of the MW6.3 early strong aftershock immediately following the 2016 MW7.8 Kaikoura earthquake (New Zealand)

The 2016 M_W7.8 Kaikoura (New Zealand) earthquake was the most complex event ever instrumentally recorded and geologically investigated, as it ruptured on more than 12 fault segments of various geometries. To study the mainshock rupture characteristics, geodetic methods like InSAR and GPS play an essential role in providing satisfactory spatial resolution. However, early strong aftershocks may cause extra ground deformation which bias the mainshock rupture inversion result. In this paper, we will focus on studying the M_W 6.3 aftershock, which is the only M6+ thrust slip aftershock that occurred only 30 minutes after the Kaikoura mainshock. We will relocate the hypocenter of this event using the hypo2000 method, make the finite fault model (FFM) inversion for the detailed rupture processes and calculate the synthetic surface displacement to compare with the observed GPS data and figure out its influence on the mainshock study. Although we are not able to resolve the real ruptured fault of this event because of limited observation data, we infer that it is a west-ward dipping event of oblique slip mechanism, consistent with the subfault geometries of the Kaikoura mainshock. According to the inverted FFM, this event can generate 10–20 cm ground surface displacement and affect the ground displacement observation at nearby GPS stations.     

The 2010 M w 7.2 El Mayor-Cucapah Earthquake Sequence, Baja California, Mexico and Southernmost California, USA: Active Seismotectonics along the Mexican Pacific Margin

The El Mayor-Cucapah earthquake sequence started with a few foreshocks in March 2010, and a second sequence of 15 foreshocks of M?>?2 (up to M4.4) that occurred during the 24?h preceding the mainshock. The foreshocks occurred along a north?Csouth trend near the mainshock epicenter. The M _w 7.2 mainshock on April 4 exhibited complex faulting, possibly starting with a ~M6 normal faulting event, followed ~15?s later by the main event, which included simultaneous normal and right-lateral strike-slip faulting. The aftershock zone extends for 120?km from the south end of the Elsinore fault zone north of the US?CMexico border almost to the northern tip of the Gulf of California. The waveform-relocated aftershocks form two abutting clusters, each about 50?km long, as well as a 10?km north?Csouth aftershock zone just north of the epicenter of the mainshock. Even though the Baja California data are included, the magnitude of completeness and the hypocentral errors increase gradually with distance south of the international border. The spatial distribution of large aftershocks is asymmetric with five M5+ aftershocks located to the south of the mainshock, and only one M5.7 aftershock, but numerous smaller aftershocks to the north. Further, the northwest aftershock cluster exhibits complex faulting on both northwest and northeast planes. Thus, the aftershocks also express a complex pattern of stress release along strike. The overall rate of decay of the aftershocks is similar to the rate of decay of a generic California aftershock sequence. In addition, some triggered seismicity was recorded along the Elsinore and San Jacinto faults to the north, but significant northward migration of aftershocks has not occurred. The synthesis of the El Mayor-Cucapah sequence reveals transtensional regional tectonics, including the westward growth of the Mexicali Valley and the transfer of Pacific?CNorth America plate motion from the Gulf of California in the south into the southernmost San Andreas fault system to the north. We propose that the location of the 2010 El Mayor-Cucapah, as well as the 1992 Landers and 1999 Hector Mine earthquakes, may have been controlled by the bends in the plate boundary.     

广西北流与靖西地区地震的应力触发现象分析

2019年广西相继发生北流5．2级和靖西5．2级地震,两次地震间隔仅一个多月,为广西陆区有地震记载以来之少见现象.分别计算广西北流4．2级前震对其5．2级主震、靖西5．2级主震对其 4．3级最大余震,以及北流5．2级地震对靖西5．2级地震的库仑破裂应力变化作用大小.结果显示:北流4．2级前震对5．2级主震可能存在明显的动态与静态应力触发作用;靖西5．2级主震对4．3 级最大余震地震可能存在动态应力触发作用和静态库仑应力抑制作用,靖西4．3级余震的发生可能是构造应力场和其5．2级主震动态应力触发共同作用的结果.由于震级较小且距离较远,北流 5．2级地震对靖西5．2级地震的库仑应力触发作用不明显.     

Seismic relocation,focal mechanism and crustal seismic anisotropy associated with the 2010 Yushu MS7.1 earthquake and its aftershocks

The 2010 Yushu M_S7.1 earthquake occurred in Ganzi-Yushu fault, which is the south boundary of Bayan Har block. In this study, by using double difference algorithm, the locations of mainshock (33.13°N, 96.59°E, focal depth 10.22 km) and more than 600 aftershocks were obtained. The focal mechanisms of the mainshock and some aftershocks with M_S>3.5 were estimated by jointly using broadband velocity waveforms from Global Seismic Network (GSN) and Qinghai Seismic Network as well. The focal mechanisms and relocation show that the strike of the fault plane is about 125° (WNW-ESE), and the mainshock is left-laterally strikeslip. The parameters of shear-wave splitting were obtained at seismic stations of YUS and L6304 by systematic analysis method of shear-wave splitting (SAM) method. Based on the parameters of shear-wave splitting and focal mechanism, the characteristics of stress field in seismic source zone were analyzed. The directions of polarization at stations YUS and L6304 are different. It is concluded that after the mainshock and the M_S6.3 aftershock on April 14, the stress-field was changed.     

Comparative Study of Changes in Stress-drop of the Jinggu MS6.6 and Ludian MS6.5 Earthquake Sequences

The earthquake stress-drop values of two sequences were accurately calculated after taking away the effects due to regional earthquake anelastic attenuation and station site response, using waveform data and seismic phase data of sequences of the Jinggu M_S6.6, and Ludian M_S6.5 earthquakes in Yunnan. These results show that the stress drop with magnitude increases within the scope of this study of magnitude. After eliminating the influence of the magnitude, the average value of stress-drop in the Jinggu sequence is higher than that of the Ludian sequence at the same magnitude range. This may be related to the stress state in different regions. In terms of the changes of time and space of stress-drop, before M_S5.8 strong aftershock, the stress-drop is "slowing down-turning up-keeping a high value" after the mainshock, meanwhile, almost all of the abnormally high stress drop value is distributed around the M_S5.8 strong aftershock, showing that the stress environment in the region was increasing after the mainshock. And after the M_S5.9 strong aftershock, stress-drop rapidly declines to a relatively stable state, meanwhile, the high value of stress-drop is distributed around the strong aftershock, showing that the regional tectonic stress gets more fully release, its stress environment begins to rapidly decrease. For the Ludian sequence without a strong aftershock occurring, the average value of stress drop is lower than that of the Jinggu earthquake sequence at the same magnitude range, while at the same time, the stress-drop of the aftershock sequence almost hasn''t changed much. In the time after the mainshock, combined with the release characteristics of the main energy, the stress in the region is excessively released, the subsequent stress in the region gradually returns to normal. This may be the reason why the activity of Ludian aftershocks significantly was weaker and subsequently there were no strong aftershocks occurred.     

2022年门源MS6.9和2016年门源MS6.4地震序列比较分析

2022年1月8日青海省海北州门源县发生M_S6.9地震,震中距离2016年1月21日门源M_S6.4地震震中约33km,两次门源地震均发生在冷龙岭断裂附近,但在震源机制、主发震断层破裂过程及地震序列余震活动等方面显著不同。针对两次门源地震序列的比较分析,对研究冷龙岭断裂及其附近区域强震序列和余震衰减特征等具有重要研究意义。通过对比分析2022年门源M_S6.9地震和2016年门源M_S6.4地震余震的时空演化特征,发现二者在震源过程和断层破裂尺度上存在明显差异,前者发震断层破裂充分,震后能量释放充分,余震丰富且震级偏高;而后者发震断层未破裂至地表,余震震级水平偏低。综合分析两次门源地震序列表现出来的差异性,认为其可能与地震发震断层的破裂过程密切相关,且同时受到区域构造环境的影响。     

Preliminary report of the September 5, 2022 MS 6.8 Luding earthquake,Sichuan, China

The 2022 M_S 6.8 Luding earthquake is the strongest earthquake in Sichuan Province, Western China, since the 2017 M_S 7.0 Jiuzhaigou earthquake. It occurred on the Moxi fault in the southeastern segment of the Xianshuihe fault, a tectonically active and mountainous region with severe secondary earthquake disasters. To better understand the seismogenic mechanism and provide scientific support for future hazard mitigation, we summarize the preliminary results of the Luding earthquake, including seismotectonic background, seismicity and mainshock source characteristics and aftershock properties, and direct and secondary damage associated with the mainshock. The peak ground displacements in the NS and EW directions observed by the nearest GNSS station SCCM are ～35 mm and ～55 mm, respectively, resulting in the maximum coseismic dislocation of 20 mm along the NWW direction, which is consistent with the sinistral slip on the Xianshuihe fault. Back-projection of teleseismic P waves suggest that the mainshock rupture propagated toward south-southeast. The seismic intensity of the mainshock estimated from the back-projection results indicates a Mercalli scale of VIII or above near the ruptured area, consistent with the results from instrumental measurements and field surveys. Numerous aftershocks were reported, with the largest being M_S 4.5. Aftershock locations (up to September 18, 2022) exhibit 3 clusters spanning an area of 100 km long and 30 km wide. The magnitude and rate of aftershocks decreased as expected, and the depths became shallower with time. The mainshock and two aftershocks show left-lateral strike-slip focal mechanisms. For the aftershock sequence, the b-value from the Gutenberg-Richter frequency-magnitude relationship, h-value, and p-value for Omori’s law for aftershock decay are 0.81, 1.4, and 1.21, respectively, indicating that this is a typical mainshock-aftershock sequence. The low b-value implies high background stress in the hypocenter region. Analysis from remote sensing satellite images and UAV data shows that the distribution of earthquake-triggered landslides was consistent with the aftershock area. Numerous small-size landslides with limited volumes were revealed, which damaged or buried the roads and severely hindered the rescue process.     

基于Gutenberg-Richter定律快速估算最大余震震级:以2017年九寨沟MS7.0地震为例

针对九寨沟M_S7.0地震之后不同时间段的余震序列目录,利用推定最大余震震级,给出了实际最大余震震级的估计值。结果表明,推定最大余震震级随主震后时间尺度的延长而趋于稳定,且该值与实际发生的最大余震的震级一致。需要强调的是,就九寨沟地震序列而言,当余震数据较为完备时,采用主震后较短时间段内（1～2天）的余震目录就可以较准确地估算出主震区域内可能发生的最大余震震级。实际上,主震后12h（0.5天）的余震数据已完全可以给出最大余震震级的有效下限。此外,计算中我们采用了里氏震级M_L和面波震级M_S的余震目录,结果显示,2种震级类型目录的估算结果完全一致,表明利用推定最大余震震级估算实际最大余震震级的方法不受震级类型的影响。据此,该最大余震震级快速评估方法可进一步推广应用于我国大陆地区中强震后强余震灾害分析评估中。目前的拟合技术也显示出随着测震技术的不断进步以及余震识别能力的提高,快速评估方法可以在主震后短时间（<1天）内准确地预测可能发生的最大余震震级。     

基于CWI方法的门源MS6.9地震余震定位研究

门源发生M_S6.9地震后,余震目录中含有大量的单台事件,为了解决单台事件的定位不准确性,利用尾波干涉(CWI)的震源定位方法将门源台记录到震后8小时内的101次单台事件进行重定位,该方法主要通过计算事件对尾波部分的间距不确定性矩阵,从而估计聚类中具有相似震源机制的地震事件对之间的间距,通过优化这些事件对的间距来解决聚类中一组事件的相对位置。最后,对定位结果进行评估,得到相对可靠的定位结果。     

2017年精河6.6级地震余震序列重新定位和发震构造

采用双差定位方法,利用中国地震台网的数据对2017年8月9日精河6.6级地震的余震序列进行了重新定位。截至2017年8月14日16时,共获得209个余震的重新定位结果。结果显示,余震主要呈近EW向或NWW向分布,余震区长约50km,宽约17km。余震分布在主震的西侧,推断此次地震单侧破裂。余震震源深度为1～25km,其中,震级较大余震深度为8～17km。精河地震序列的余震活动随时间呈起伏状衰减,震后2天内比较活跃,此后出现较快衰减。随时间推移,余震区呈现中西部衰减慢、东部衰减快的特点。此次地震震中距2011年精河5.0级地震震中21km,相比2011年精河地震,其震源更深,震级更大,但震源机制解相近,均为逆冲型。结合区域构造背景分析认为,库松木契克山前断裂为此次地震发震构造的可能性较大。     

Segmented seismicity of the M w 6.2 Baladeh earthquake sequence (Alborz Mountains, Iran) revealed from regional moment tensors

The M _w 6.2 Baladeh earthquake occurred on 28 May 2004 in the Alborz Mountains, northern Iran. This earthquake was the first strong shock in this intracontinental orogen for which digital regional broadband data are available. The Baladeh event provides a rare opportunity to study fault geometry and ongoing deformation processes using modern seismological methods. A joint inversion for hypocentres and a velocity model plus a surface-wave group dispersion curve analysis were used to obtain an adapted velocity model, customised for mid- and long-period waveform modelling. Based on the new velocity model, regional waveform data of the mainshock and larger aftershocks (M _w ?≥3.3) were inverted for moment tensors. For the Baladeh mainshock, this included inversion for kinematic parameters. All analysed earthquakes show dominant thrust mechanisms at depths between 14 and 26 km, with NW–SE striking fault planes. The mainshock ruptured a 28° south-dipping area of 24 × 21 km along a north-easterly direction. The rupture plane of the mainshock does not coincide with the aftershock distribution, neither in map view nor with respect to depth. The considered aftershocks form two main clusters. The eastern cluster is associated with the mainshock. The western cluster does not appear to be connected with the rupture plane of the mainshock but, instead, indicates a second activated fault plane dipping at 85° towards the north.     

Precursory quiescence before the August 1982 Stone Canyon,San Andreas fault,earthquakes

The Stone Canyon earthquake sequence started during August 1982 and lasted for about four months. It contained four mainshocks withM _L 4, each with an aftershock zone about 4 km long. These mainshocks, progressing from southeast to northwest, ruptured a segment of the fault approximately 20 km long leaving two gaps, which were later filled by theM _L =4.6 mainshocks of January 14, and May 31, 1986. The equivalent magnitude of the sequence isM _L =5.0.Precursory seismic quiescence could be identified in: (1) the northernmost 10 km of the aftershock zone which contained three of the mainshocks; and (2) the southern gap in the aftershock zone. The fault segment containing the first mainshock and its aftershocks did not show quiescence. This pattern of precursory quiescence is very similar to two cases in Hawaii where the rupture initiation points of the mainshocks (M _S =7.2 and 6.6, respectively) were located in volumes of constant seismicity rate, surrounded by volumes with pronounced precursory quiescence.The precursory quiescence before the August 1982 Stone Canyon earthquakes lasted for 76 weeks, amounted to a reduction in rate of about 60%, and could be recognized without any false alarms. That is, the anomaly was unique within the 60 km study segment of the fault and in the years 1975 through August 1982. Eighteen foreshocks occurred between July 27 and August 7, 1982. We conclude that the August 1982 mainshocks could have been predicted, based on seismic quiescence and foreshocks.     

High-precision relocation of the aftershock sequence of the January 8, 2022, MS6.9 Menyuan earthquake

The 2022 Menyuan M_S6.9 earthquake, which occurred on January 8, is the most destructive earthquake to occur near the Lenglongling (LLL) fault since the 2016 Menyuan M_S6.4 earthquake. We relocated the mainshock and aftershocks with phase arrival time observations for three days after the mainshock from the Qinghai Seismic Network using the double-difference method. The total length and width of the aftershock sequence are approximately 32 km and 5 km, respectively, and the aftershocks are mainly concentrated at a depth of 7–12 km. The relocated sequence can be divided into 18 km west and 13 km east segments with a boundary approximately 5 km east of the mainshock, where aftershocks are sparse. The east and west fault structures revealed by aftershock locations differ significantly. The west fault strikes EW and inclines to the south at a 71º–90º angle, whereas the east fault strikes 133º and has a smaller dip angle. Elastic strain accumulates at conjunctions of faults with different slip rates where it is prone to large earthquakes. Based on surface traces of faults, the distribution of relocated earthquake sequence and surface ruptures, the mainshock was determined to have occurred at the conjunction of the Tuolaishan (TLS) fault and LLL fault, and the west and east segments of the aftershock sequence were on the TLS fault and LLL fault, respectively. Aftershocks migrate in the early and late stages of the earthquake sequence. In the first 1.5 h after the mainshock, aftershocks expand westward from the mainshock. In the late stage, seismicity on the northeast side of the east fault is higher than that in other regions. The migration rate of the west segment of the aftershock sequence is approximately 4.5 km/decade and the afterslip may exist in the source region.     

Relocation of the MS5.7 Earthquake Sequence in Songyuan, Jilin Province, 2018 and the Analysis of Its Seismogenic Structure

The 2018,Songyuan,Jilin M_S5. 7 earthquake occurred at the intersection of the FuyuZhaodong fault and the Second Songhua River fault. The moment magnitude of this earthquake is M_W5. 3,the centroid depth by the waveform fitting is 12 km,and it is a strike-slip type event. In this paper,with the seismic phase data provided by the China Earthquake Network, the double-difference location method is used to relocate the earthquake sequence,finally the relocation results of 60 earthquakes are obtained. The results show that the aftershock zone is about 4. 3km long and 3. 1km wide,which is distributed in the NE direction. The depth distribution of the seismic sequence is 9km-10 km. 1-2 days after the main shock,the aftershocks were scattered throughout the aftershock zone,and the largest aftershock occurred in the northeastern part of the aftershock zone. After 3-8 days,the aftershocks mainly occurred in the southwestern part of the aftershock zone. The profile distribution of the earthquake sequence shows that the fault plane dips to the southeast with the dip angle of about 75°. Combined with the regional tectonic setting,focal mechanism solution and intensity distribution,we conclude that the concealed fault of the Fuyu-Zhaodong fault is the seismogenic fault of the Songyuan M_S5. 7 earthquake. This paper also relocates the earthquake sequence of the previous magnitude 5. 0 earthquake in 2017. Combined with the results of the focal mechanism solution,we believe that the two earthquakes have the same seismogenic structure,and the earthquake sequence generally develops to the southwest. The historical seismic activity since 2009 shows that after the magnitude 5. 0 earthquake in 2017,the frequency and intensity of earthquakes in the earthquake zone are obviously enhanced,and attention should be paid to the development of seismic activity in the southwest direction of the earthquake zone.     

岷县漳县6.6级地震及余震强震动记录特征分析

对2013年7月22日甘肃岷县—漳县地震获取的273条主余震加速度记录进行格式转换、基线校正和滤波等常规处理,分析该地震主震(M_S6.6)和余震(M_S5.6)两次地震记录的幅值、持时以及反应谱特征,发现M_S6.6主震记录的PGA范围在0.728～177.5 gal间,M_S5.6余震记录的PGA范围在0.732～69.3 gal间;将观测数据与霍俊荣和第五代《中国地震动参数区划图》地震动衰减关系进行对比,发现霍俊荣衰减关系更吻合于此次地震的主余震加速度衰减;绘制主余震5%～95%重要持时分布图,并针对主震62MXT反应谱和本地设计谱以及近些年国内主要强震震中反应谱开展比较分析;最后研究土层台、基岩台、相同台站各个震级反应谱的特征。     

四川长宁MS6.0地震区域构造应力场特征分析

2019年6月17日在四川宜宾市长宁县（28.34°N,104.90°E）发生M_S6.0地震,余震发育。本文利用区域测震台网的地震观测数据基于CAP方法计算了28°~29°N,104°~105°E范围内的14个M_S>3.0以上地震的震源机制解,结合全球矩心矩张量目录和部分前人研究结果中该区域的共27个震源机制解数据,应用MSATSI软件反演了研究区域的应力场。将研究区域按0.1°×0.1°划分成25个应力网格,最终得到9个网格的应力分布结果,大多数应力场方向稳定,根据主震所在应力网格点得到主震的断层类型为主逆冲型。本文研究成果为四川长宁地区的孕震机理、活动构造以及地震趋势判定提供了可靠的参考依据。     

Analysis on the Characteristics of the Kalpin MS5.3 Earthquake Sequence of December 1, 2013 and Anomalies before the Earthquake

This paper introduces the basic parameters, focal mechanism solutions and earthquake sequence characteristics of the Kalpin M_S5.3 earthquake sequence of December 1, 2013, and analyzed seismic activity before the earthquake, the adjacent tectonic features and the precursory anomaly at fixed points within a range of 200km. Research indicates:(1) The earthquake occurred on Kalpin fault, the source rupture type is thrust faulting with sinistral strike-slip component. (2) The earthquake sequence is mainshock-aftershock type, with the aftershock distribution attenuating quickly and trending NE. (3) Abnormal seismic activity before the earthquake was characterized by seismically nesting quiescence of M_S2.0-4.0 earthquakes, seismic quiescence of M_S4.0 earthquakes and seismic belts of M_S3.0 earthquakes in the Kalpin block, abnormal enhancement zone of moderate earthquakes on Puchang fault and seismological parameters. (4) Anomalies of precursory observation data at fixed stations are mainly characterized by mutation. Apart from the borehole tiltmeter in Halajun, the spatial distribution of other abnormal precursors showed a phenomenon of migration from the near field to far field and from the epicenter to the peripheries.     

Changes in Earthquake Source Properties across a Shallow Subduction Zone: Kamchatka Peninsula

—This paper studies the source properties of earthquakes originating within the shallow subduction zone near Kamchatka Peninsula. We use the regional catalog of 1962–1993 Kamchatkan earthquakes completed by the Institute of Volcanology, Russia. Our previous investigations (Zobin, 1990, 1996a) and this study allow us to show a gradual change in source properties of earthquakes from trench to coast.¶It was demonstrated that the swarm sequences change to the mainshock–aftershock sequences from trench to coast. The source area of aftershock sequences is generally smaller than the swarm areas for the same magnitude M _s of the mainshock or clue event of the swarm. Study of the M _s –K _s relation, where K _s is the energy class for Kamchatka earthquakes, reveals that the events radiate relatively higher frequencies from trench to coast.     

Monitoring of fault healing after the 1999 Kocaeli, Turkey, earthquake

The North Anatolian fault zone that ruptured during the mainshock of theM 7.4 Kocaeli (Izmit) earthquake of 17 August 1999 has beenmonitored using S wave splitting, in order to test a hypothesisproposed by Tadokoro et al. (1999). This idea is based on the observationof the M 7.2 1995 Hyogo-ken Nanbu (Kobe) earthquake, Japan.After the Hyogo-ken Nanbu earthquake, a temporal change was detectedin the direction of faster shear wave polarization in 2–3 years after the mainshock (Tadokoro, 1999). Four seismic stations were installed within andnear the fault zone at Kizanlik where the fault offset was 1.5 m, about80 km to the east of the epicenter of the Kocaeli earthquake. Theobservation period was from August 30 to October 27, 1999. Preliminaryresult shows that the average directions of faster shear wave polarization attwo stations were roughly parallel to the fault strike. We expect that thedirection of faster shear wave polarization will change to the same directionas the regional tectonic stress reflecting fault healing process. We havealready carried out a repeated aftershock observation at the same site in2000 for monitoring the fault healing process.     

青海祁连MS5.2地震微震检测与目录完备性研究

利用模板匹配方法对2015年11月23日青海省祁连县M_S5.2地震进行遗漏地震检测研究,由于主震后短时间内目录中遗漏事件较多,故对主震后1天的连续波形进行检测。主震后1天内青海测震台网记录到的余震个数(包括单台)共62个,选取主震后M_L1.0以上余震30个作为模板事件,通过匹配滤波的方式扫描出遗漏地震31个,约为台网目录给出的0.5倍。基于包络差峰值振幅与震级的线性关系估测检测事件的震级参数,最后将检测后的余震目录与台网余震目录在主震后1天内的最小完备震级进行对比分析,结果发现检测后最小完备震级从M_L1.2降到了M_L0.7,得到青海测震台网在祁连地区最小完整性震级为M_L0.7。