Polythiophene based fluorescent probe for copper ions with high sensitivity

Two new conjugated polymers poly{3‐({4‐[(2‐hydrazino‐2‐oxoethyl)(methyl)amino]cyclohexylidene}methyl)thiophene}( P1 ) and poly{3‐({4‐[(3‐hydrazino‐3‐oxopropyl)(methyl)amino]cyclohexylidene}methyl)thiophene}( P2 ) were synthesized, and their optical properties were investigated. P1 exhibited excellent selectivity toward Cu²⁺ ions in 50% water solution, the fluorescence color of P1 changed distinctly from greenyellow to colorless in the presence of Cu²⁺ under UV‐light, while introduction of other metal ions could not induce such significant variation. Moreover, highly sensitive detection of Cu²⁺ ions was demonstrated in 90% water solution. Its high metal‐chelating capability allowed Cu²⁺ recognition with a detection limit of 3.2 × 10^?10 M. These results indicated that this kind of nonionic polymer containing multidentate ligand could be used as a highly selective and sensitive chemosensor for Cu²⁺ detection. The proposed binding mode of P1 with Cu²⁺ was supported by DFT calculation using Gaussian 03. Unlike P1 , P2 showed no obvious fluorescent change in the presence of various metal ions due to its space steric hindrance resulted from N/O distribution on the side chain of P2 . © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42440.     

Smart films based on bacterial cellulose nanofibers modified by conductive polypyrrole and zinc oxide nanoparticles

In this study, we synthesized novel films based on bacterial cellulose (BC), BC modified by polypyrrole (PPy), and a PPy–zinc oxide nanocomposite (BC–PPy–ZnO). The soft polymerization method at room temperature was used to obtain the BC–PPy and BC–PPy–ZnO films. The Combined D‐Optimal design was used to study the effects of the pyrrole monomer concentration, ZnO concentration, and polymerization time on the morphological, physical, color, and electrical conductivity properties of the films. Fourier transform infrared results reflected that some new interactions occurred between BC and PPy and PPy–ZnO. The X‐ray diffraction analysis showed that the crystalline behavior of the BC fiber was hindered because of the complete coating with the amorphous PPy particles. Scanning electron microscopy results show that the ZnO, PPy, and PPy–ZnO nanoparticles were placed between the BC fibers. PPy decreased the water vapor permittivity and total soluble matter percentage. Electrical conductivity studies of the synthesized BC–PPy–ZnO film showed that the film's electrical resistance was changed in different oxidation–reduction or volatile compounds media, so the results suggest that the BC–PPy–ZnO films could be used in antioxidative food active packaging and smart packaging. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46617.     

Development of flexible sensors using knit fabrics with conductive polyaniline coating and graphite electrodes

The aim of this study was to develop flexible sensors with cotton and polyester knit fabrics as substrates coated with polyaniline (PAni) doped with hydrochloric acid or phosphoric acid. The deposition of PAni onto the knit, polymerization synthesis, and doping of the aniline monomer were performed via an in situ reaction. Graphite dispersion was used to obtain the electrodes of the sensors, which were prepared differently for each substrate. The main evaluation of the sensors was carried out in a humidity chamber under nitrogen (N₂) with the application of drying and wetting cycles. Significant differences were observed in the responses of the sensory devices to humidity, according to the dopant and substrate types. In all tests, the sensor response to variations in the ambient conditions was very good, with a rapid response to changes in the relative humidity, a good sensitivity (up to 34%), and a high reversibility (ca. 70–100%). © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44785.     

Impact damage sensing of multiscale composites through epoxy matrix containing carbon nanotubes

Carbon nanotubes are used to provide increased electrical conductivity for polymer matrix materials, thus offering a method to monitor the structure's health. This work investigates the effect of impact damage on the electrical properties of multiscale composite samples, prepared with woven fiberglass reinforcement and epoxy resin modified with as‐received multi‐walled carbon nanotubes (MWCNTs). Moreover, this study addresses potential bias from manufacturing, and investigates the effectiveness of resistance measurements using two‐ and four‐point probe methods. Transmission electron microscopy and static tensile tests results were used to evaluate, respectively, the dispersion of MWCNTs in the epoxy resin and the influence of the incorporation of these nanoparticles on the static tensile properties of the matrix, and interpret results from the resistance measurements on impacted specimens. In this study, the four‐point probe method is shown to be much more repeatable and reliable than the two‐point probe method. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Facile synthesis of graphene/polypyrrole 3D composite for a high‐sensitivity non‐enzymatic dopamine detection

One kind of nanocomposite consisting of graphene and polypyrrole was synthesized via a facile and mild way with the assistant of microwave irradiation. The synthesis route was embedding the polypyrrole into the graphene flakes to form a 3D structure, to achieve larger active surface and higher electro‐catalysis property. Structures and components of the composite were measured by X‐ray diffraction, field emission scanning electron microscopy, and Fourier transform infrared spectroscopy. A stronger electrochemical response of electrode with modified resultant was observed in the electrochemical test. Dopamine sensor based on the composite showed a sensitivity of 363 μA mM ^?1 cm^?2, a linear range of 1 × 10^?4 M to 1 × 10^?3 M , and a detection limit of 2.3 × 10^?6 M (S/N = 3). © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44840.     

Accurate self-damage detection by electrically conductive epoxy/graphene nanocomposite film

Detecting and locating accurately structure damages at an early stage is essential to minimization of catastrophic disasters, prevention of fatalities and provision of cost-effective maintenance. We herein report a facile approach to detect structure damages and to accurately identify their locations by using an electrically conductive epoxy/graphene nanocomposite film. A percolation threshold of electrical conductivity was observed at 0.58 vol% of graphene platelets (GnPs, ~3 nm in thickness and ~15 μm in length); electrical conductivity of 3.3 S/cm was obtained at 9.00 vol% of GnPs. The epoxy/GnP composite film containing 9.00 vol% of GnPs was employed as an array of electrically conductive paths in horizontal and vertical directions to detect and locate structure's damages. Thermal stability and temperature coefficient of the composite film were studied. Relative resistance change due to temperature effect was fitted into an exponential function, which showed strong correlation with the temperature change. This implies that an algorithm can be developed to compensate drift errors in resistance measurement due to temperature variation. With the help of Internet of Things, our self-sensing epoxy/graphene nanocomposite films have great potential for smart aerospace structural health monitoring.     

Disposable potentiometric citrate sensor based on polypyrrole‐doped films for indirect determination of sildenafil in pharmaceuticals formulations

A new sensitive and selective disposable potentiometric sensor based on polypyrrole (PPy) films for determination of sildenafil citrate (SC) was proposed. The pyrrole polymerization was performed in presence of citrate ions under galvanostatic conditions which resulted in a membrane of PPy doped with citrate anion at graphite pencil electrode surface. Experimental conditions (e.g., pH and conditioning time) and instrumental parameters (e.g., current density and electrical charge) were evaluated in order to reach the best potentiometric response for the proposed sensor. Under optimized conditions, the device presented a linear dynamic range (LDR) for citrate ions concentrations varying from 0.034 to 1.7 mmol L^?1 with a Nernstian slope of 57.2 mV dec^?1 and a limit of detection (LOD) of 30 µmol L^?1. The developed potentiometric sensor was applied for sildenafil citrate (SC) determination (pharmaceutical formulations) and results compared with an official spectrophotometric method indicating a good agreement for a confidence level of 95%. Effect of concomitants species on the potentiometric response of the proposed device and morphologic characterization using microscopy of atomic force (AFM) were realized. The surface roughness of PPy films (synthesized in citrate solution and chloride) showed poorly affected by changing the doping anion, probably because the polypyrrole nodules grow three‐dimensionally simultaneously. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43762.     

Temperature memory effect from below glass transition to up to melting range in an ethylene-vinyl acetate copolymer

In this paper, the temperature memory effect (TME) in a commercial ethylene-vinyl acetate copolymer (EVA) is characterized via differential scanning calorimetry (DSC) tests. Three temperatures, which are 35, 60, and 85°C representing temperatures below glass transition (T_g), within T_g and within melting (T_m), respectively, are included for the investigation. It is found that TME in polymers is not as reported to be limited at around either T_g or T_m only, the effective temperature range for TME could be actually much wider that covers from below T_g to up to T_m. In addition, it is concluded that higher heating stop temperature (T_s) erases the memory of previous lower ones in this EVA. Hysteresis (described by ΔT) between the temperature of turning points (T_ts) and their corresponding T_ss is always observable. However, the ΔT decreases at higher T_s.     

Two kinds of polyaniline fiber photo sensor with interdigital electrode and flexible hydrogel

In previous studies, polyaniline nanofiber sensor on interdigital electrode is sensitive to light. Herein, we prepared a flexible hydrogel sensor with polyaniline nanofiber as the active material and polyacrylamide hydrogel as the flexible substrate. Comparing the properties of above two different kinds of sensors with polyaniline nanofiber, the photocurrent generated by PANI-hydrogel sensor under external light stimulation is about 1 ~ 2 orders of magnitude higher than interdigital electrode sensor, indicating the PANI-hydrogel sensor is more sensitive. The two sensors can all respond to different wavelengths of monochromatic light, especially sensitive to light of smaller wavelengths such as ultraviolet light (380 nm) and blue light (475 nm). Moreover, the volt-ampere characteristic curve in response to external light stimulation can be clearly distinguished only when the appropriate concentration of proton acid is doped (3 g citric acid, 7 g acetic acid, and 3 ml HCl).     

Enhancement in ammonia sensitivity with fast response by doping Al2O3 in polyaniline

Al₂O₃ mixed polyaniline composite with different dopant concentrations have been synthesized successfully by chemical oxidation method. X‐ray diffraction, Fourier transform infrared spectroscopy, and UV–visible spectroscopy confirm the synthesis of the polyaniline and Al₂O₃ mixed polyaniline composite. Scanning electron microscopy shows the weak crystalline quality of the samples. The samples are found sensitive to ammonia gas. The sensing properties have been studied at different temperatures i.e. 25°C, 50°C, and 100°C by varying the ammonia concentration over a range of 100–1500 ppm. The sensitivity increases with increasing Al₂O₃ concentration, increasing ammonia concentration, and also with increasing the sensing temperature. Sensitivity of these samples to ammonia gas is good with fast response. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1941–1948, 2013     

Effect of electrical properties on gas sensitivity of polypyrrole/cds nanocomposites

In the present work, polypyrrole (PPy) nanocomposites were synthesized using ferric chloride (FeCl₃) as an oxidant by in situ polymerization at room temperature. Cadmium sulfide (CdS) nanoparticles were synthesized by ultrasonication technique with size ranging between 60 and 110 nm. The PPy/CdS nanocomposites were prepared by taking 1–3 wt % loading of CdS to measure the electrical conductivity. The PPy nanocomposites were characterized by using FTIR, X‐ray diffraction, UV, and SEM. Furthermore, these PPy/CdS nanocomposites were investigated to study their effect of electrical properties on gas sensitivity of ammonia and LPG. The nanocomposites showed improvement in conductivity and sensing response toward 250 ppm NH₃ was found to be maximum (4.2) compared with 100 and 500 ppm NH₃ gas, whereas in the case of LPG, it showed sensitive response. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42379.     

A versatile radiochromic dosimeter for low‐medium gamma radiation and its application to food irradiation

This article presents a novel radiochromic film for selective detection of low‐medium (0–10 kGy) gamma radiation (⁶⁰Co) doses. This dosimeter is based on a printed fluorescent multilayer structure comprising a paper substrate having layers of copper phthalocyanine (DY220) (a green emitter material) on the bottom, and layers of poly[2‐methoxy‐5(2′‐ethylhexyloxy)‐p‐phenylenevinylene] (MEH‐PPV) (a green‐light absorber, red emitter, and radiation sensitive polymer) on the top. The effect of gamma radiation on the optical properties of DY220/MEH‐PPV was described: it was observed as a strong correlation between radiation dose and fluorescent, color coordinates for CIE (1931) chromatic diagram, and Pantone color reference of the dosimeter. The rate of these changes can be altered by manipulation of top–bottom layers to represent easily the radiation dose to be determined in a wide range. This versatile dosimeter has many uses in the field of food radiation for monitoring, quality assurance, and control of the gamma radiation process. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45729.     

Economical conductive graphite-filled polymer composites via adjustable segregated structures: Construction,low percolation threshold,and positive temperature coefficient effect

The economical graphite-filled thermoplastic urethane/ultra-high molecular weight polyethylene (TPU/UHMWPE) composites with the segregated structure were constructed by the combination of mechanical crushing and melt blending method. The low percolation threshold of 1.89 wt% graphite in the adjustable segregated composites was obtained and high electrical conductivity was about 10⁻¹ S m⁻¹ at 10 wt% graphite loadings owing to the formation of three-dimensional conductive networks. Moreover, when the graphite loadings were over the percolation threshold, the remarkable positive temperature coefficient (PTC) effect of electrical resistivity for TPU/UHMWPE-Graphite composites were achieved, originating from the combined thermal motion of TPU and UHMWPE. Meanwhile, the outstanding repeatability of PTC effects was obtained after 5-time cycles. Therefore, economical conductive polymer composites were still the promising field in the practical application of PTC materials.     

Electrosynthesis,characterization, and application of poly(3,4‐ethylenedioxythiophene) derivative with a chloromethyl functionality

Poly(2‐chloromethyl‐2,3‐dihydrothieno[3,4‐b][1,4]dioxine), a chloromethyl functionalized poly(3,4‐ethylenedioxythiophene) derivative (PEDOT‐MeCl), was synthesized electrochemically via the potentiostatic polymerization of its monomer in dichloromethane solution containing suitable tetrabutylammonium tetrafluoroborate, then it was used for the characterization of film properties and the fabrication of electrochemical sensor. The properties of the resulting PEDOT‐MeCl film were characterized by different methods such as cyclic voltammetry, electrochemical impedance spectroscopy, Fourier transform infrared and ultraviolet–visible techniques, scanning electron microscope, and thermogravimetric analysis. The PEDOT‐MeCl film displayed a good reversible redox activity, remarkable capacitance properties, good thermal stability, rough, and porous structure, especially fluorescent spectra indicated that PEDOT‐MeCl was a blue‐emitter with maximum emission centered at 396 and 398 nm. Finally, the PEDOT‐MeCl film was employed for the fabrication of the sensing electrode, and dopamine was chosen as a model analyte for the application of the electrochemical sensor. Results indicated that the PEDOT‐MeCl film as sensing interface was feasible, and studies of these film properties were very beneficial for studying properties and applications of other poly(3,4‐ethylenedioxythiophene) derivative films. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2660–2670, 2013     

Ultrasonic characterization of conductive epoxy resin/polyaniline composites

This study presents the ultrasonic characterization of conductive epoxy resin (ER)/polyaniline (PANI) composites. The prepared PANI is mixed with ER matrix at weight percentages of 5%, 10%, and 15% for preparing the ER/PANI composites. The effects of PANI amount on the mechanical properties of ER/PANI composites are investigated by ultrasonic pulse‐echo‐overlap method. Also, electrical conductivity, ultrasonic wave velocity and ultrasonic micro‐hardness values of ER/PANI composites are correlated. Experimental results show that there is an excellent correlation between ultrasonic micro‐hardness and ultrasonic shear wave velocity. Also, the results of ultrasonic velocities and elastic constants values illustrate that the appropriate combination ratio is 95 : 5 for ER and PANI in ER/PANI composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42748.     

Electrochemical Biosensor Based on surfactant doped polypyrrole (PPy) matrix for lactose determination

Lactose biosensor based on surfactant doped polypyrrole (PPy) was developed. Galactose oxidase and β‐galactosidase was coimmobilized in PPy matrix during electropolymerization process with the presence of sodium dodecylbenzene sulphonic acid as surfactant. Bi‐enzyme entrapped PPy was characterized with Fourier transform infrared spectroscopy (FTIR), cyclic voltammetry (CV), and scanning electron microscopy (SEM). The response of the enzyme electrode was measured by CV in the range of ?0.1 to 1.0 V versus Ag/AgCl which was due to the electrooxidation of enzymatically produced H₂O₂. The effect of lactose concentration was investigated. Response time of biosensor was found to be 8–10 s (the time required to obtain the maximum peak current) and upper limit of the linear working portions was found to be 1.22 mM lactose concentration with a detection limit of (2.6 × 10^?6 M). The apparent Michaelis–Menten constant was found to be 0.117 mM lactose. The effects of interferents (ascorbic acid and uric acid) were determined. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40200.     

Preparation of conductive polyaniline fibers by a continuous forming‐drawn processing routine

Polyaniline fibers were prepared with a continuous forming‐drawn processing routine that better met practical production requirements. The continuous forming drawing of the fibers was conducted successfully with the following methods. A reducing agent was added to a polymer solution during the dissolution of a polyaniline emeraldine base in N‐methyl‐2‐pyrrolidinone (NMP). After the entire wet‐spinning process was finished, the fibers were reoxidized and doped to obtain electric conductivity. The as‐spun fibers were predrawn at a low drawing ratio in a warm water bath before a plasticization drawing process on a hot plate. After the fibers were predrawn, some solvent was still kept in the fibers and used as a plasticizer of the fibers so that the plasticization drawing process would be performed successfully. The spinning conditions that affected the mechanical properties and conductivity of the fibers were the content of NMP in the coagulation bath, the coagulation‐bath temperature, the warm‐water‐bath temperature, the predrawing ratio, the hot‐plate temperature, the plasticization drawing ratio, and the reoxidation and protonation treatment time. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 956–960, 2004     

MWCNTs reinforced conductive,self-healing polyvinyl alcohol/carboxymethyl chitosan/oxidized sodium alginate hydrogel as the strain sensor

The preparation and application of hydrogel has been a hot research field in recent years. Here in, a composite hydrogel based on poly(vinyl alcohol) (PVA), carboxymethyl chitosan (CMCS), oxidized sodium alginate (OSA), and oxidized multiwall carbon nanotubes (OMWCNTs) was successfully prepared. Hydrogen and imine bonds of the hydrogel endowed the composite hydrogel with self-healing property and pH sensitivity. The fracture strength of the hydrogel was enhanced to about 0.8 MPa with the help of OMWCNTs, which was about 2.5 times compared with the one without OMWCNTs. Meanwhile, a new conductive network inside the hydrogel was constructed by OMWCNTs, which improved the conductivity of the hydrogel from 1.75 × 10⁻⁴ to 7.02 × 10⁻⁴ S/cm. The sensing test of the hydrogel showed that it could produce profound feedback signals for the deformation caused by external force and response to human body movements, such as finger bending, swallowing, and speaking.     

Influence of monomeric concentration on mechanical and electrical properties of poly(styrene-co-acrylonitrile) and poly(styrene-co-acrylonitrile/acrylic acid) yarns electrospun

Two series of copolymers were synthesized by emulsion polymerization: poly(styrene-co-acrylonitrile) P(S:AN) and P(S:AN-acrylic acid) P(S:AN-AA). The monomeric concentrations in both series were: 0:100, 20:80, 40:60, 50:50 (wt%:wt%), and 1 wt% of AA. The copolymers were dissolved in N,N-dimethylformamide (4–10 wt%) and were electrospun. Polymeric yarns were collected using a blade collector. The synthesized and fabricated materials were characterized by known techniques. Mechanical and electrical properties of polymeric yarns indicated a dependence of monomeric concentration. Elastic modulus increases as acrylonitrile concentration increases (up to 30 MPa). Yarns were submitted to degradation process into saline solution, where the acrylic acid content kept a constant elastic modulus at long times. The electrical current into yarns was higher when the concentration is 50:50 wt%:wt% (1.2 mA). The cytotoxicity results showed a cell viability close to 100% for yarns without AA.