Structural, electronic, elastic and thermal properties of Mg2Si

First-principles calculations of the lattice parameter, electron density maps, density of states and elastic constants of Mg₂Si are reported. The lattice parameter is found to differ by less than 0.8% from the experimental data. Calculations of density of states and electron density maps are also performed to describe the orbital mixing and the nature of chemical bonding. Our results indicate that the bonding interactions in the Mg₂Si crystal are more covalent than ionic. The quasi-harmonic Debye model, by means of total energy versus volume calculations obtained with the plane-wave pseudopotential method, is applied to study the elastic, thermal and vibrational effects. The variations of bulk modulus, Grüneisen parameter, Debye temperature, heat capacity C_v, C_p and entropy with pressure P up to 7 GPa in the temperature interval 0-1300 K have been systemically investigated. Significant differences in properties are observed at high pressure and high temperature. When T<1300 K, the calculated entropy and heat capacity agree reasonably with available experimental data. Therefore, the present results indicate that the combination of first-principles and quasi-harmonic Debye model is an efficient approach to simulate the behavior of Mg₂Si.     

Investigations of meta-stable and post-spinel silicon nitrides

Since the discovery of post-spinel Si₃N₄, its fundamental physical properties are highly required. In this paper, theoretical calculations are performed to investigate the structural and elastic properties of the β-, γ-, wII- and post-spinel Si₃N₄ polymorphs. The calculated ground-state properties compare well with available experiments. The phase transformations of the β-, γ-, wII- and post-spinel phases are investigated by the famous plane-wave pseudo-potential density functional theory. From the elastic constants obtained, we find that β-, γ- and wII-Si₃N₄ are stable at 0 GPa and the post-spinel phase is unstable/stable at 0 GPa/160 GPa. When the high-temperature β→γ transformation is bypassed due to kinetic reasons, β-Si₃N₄ is predicted to undergo a first-order phase transition to a new phase (wII-Si₃N₄). It is found that the transition pressures of β→wII and γ→post-spinel transitions are 20.8 GPa and 152.5 GPa, respectively. The phase boundary of the γ→post-spinel transition can be described as P=152.3631−6.39×10⁻³T+2.01062×10⁻⁵T²−1.93962×10⁻⁹T³. Through the quasi-harmonic approximation, the dependences of heat capacity, entropy, thermal expansion coefficient and the Debye temperature on temperature, are also successfully predicted.     

Thermodynamic properties of OsB under high temperature and high pressure

The energy-volume curves of OsB have been obtained using the first-principles plane-wave ultrasoft-pseudopotential density functional theory (DFT) within the generalized gradient approximation (GGA) and local density approximation (LDA). Using the quasi-harmonic Debye model we first analyze the specific heat, the coefficients of thermal expansion as well as the thermodynamic Grüneisen parameter of OsB in a wide temperature range at high pressure. At temperature 300 K, the coefficients of thermal expansion α_V by LDA and GGA calculations are 1.67×10⁻⁵ 1/K and 2.01×10⁻⁵ 1/K, respectively. The specific heat of OsB at constant pressure (volume) is also calculated. Meanwhile, we find that the Debye temperature of OsB increases monotonically with increasing pressure. The present study leads to a better understanding of how the OsB materials respond to pressure and temperature.     

Elastic constants and thermodynamic properties of Mg2SixSn1-x from first-principles calculations

<正>This paper stuides the elastic constants and some thermodynamic properties of Mg₂Si_xSn_n-1（x=0,0.25,0.5, 0.75,1） compounds by first-principles total energy calculations using the pseudo-potential plane-waves approach based on density functional theory,within the generalized gradient approximation for the exchange and correlation potential. The elastic constants of Mg₂Si_xSn_n-1 were calculated.It shows that,at 273 K,the elastic constants of Mg₂Si and Mg₂Sn are well consistent with previous experimental data.The isotropy decreases with increasing Sn content.The dependences of the elastic constants,the bulk modulus,the shear modulus and the Debye temperatures of Mg₂Si and Mg₂Si_0.5Sn_0.5 on pressure were discussed.Through the quasi-harmonic Debye model,in which phononic effects were considered,the specific heat capacities of Mg₂Si_xSn_1-x at constant volume and constant pressure were calculated.The calculated specific heat capacities are well consistent with the previous experimental data.     

Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.     

Phase stability,elastic, electronic,thermal and optical properties of Ti3Al1−xSixC2 (0≤x≤1): First principle study

The structural parameters with stability upon Si incorporation and elastic, electronic, thermodynamic and optical properties of Ti₃Al_1−xSi_xC₂ (0≤x≤1) are investigated systematically by the plane wave pseudopotential method based on the density functional theory (DFT). The increase of some elastic parameters with increasing Si-content renders the alloys to possess higher compressive and tensile strength. The Vickers hardness value obtained with the help of Mulliken population analysis increases as x is increased from 0 to 1. The solid solutions considered are all metallic with valence and conduction bands, which have a mainly Ti 3d character, crossing the Fermi level. The temperature and pressure dependences of bulk modulus, normalized volume, specific heats, thermal expansion coefficient, and Debye temperature are all obtained through the quasi-harmonic Debye model with phononic effects for T=0−1000 K and P=0−50 GPa. The obtained results are compared with other results available. Further an analysis of optical functions for two polarization vectors reveals that the reflectivity is high in the visible–ultraviolet region up to ∼10.5 eV region showing promise as a good coating material.     

Phase transition, structural and thermodynamic properties of Mg2Si polymorphs

The plane-wave pseudo-potential method within the framework of first principles is used to investigate the structural and elastic properties of Mg 2 Si in its intermediate pressure(Pnma) and high pressure phases(P 6 3 /mmc).The lattice constants,the band structures.The bulk moduli of the Mg 2 Si polymorphs are presented and discussed.The phase transition from anti-cotunnite to Ni 2 In-type Mg 2 Si is successfully reproduced using a vibrational Debye-like model.The phase boundary can be described as P = 24.02994 + 3.93 × 10 3 T 4.66816 × 10 5 T 2 2.2501 × 10 9 T 3 + 2.33786 × 10 11 T 4.To complete the fundamental characteristics of these polymorphs we have analysed thermodynamic properties,such as thermal expansion and heat capacity,in a pressure range of 0-40 GPa and a temperature range of 0-1300 K.The obtained results tend to support the available experimental data and other theoretical results.Therefore,the present results indicate that the combination of first principles and a vibrational Debye-like model is an efficient scheme to simulate the high temperature behaviours of Mg 2 Si.     

Elasticity and thermodynamic properties of RuB2 under pressure

First-principles calculations of the crystal structure and the elastic properties of RuB₂ have been carried out with the plane-wave pseudopotential density functional theory method. The calculated values are in very good agreement with experimental data as well as with some of the existing model calculations. The elastic constants c_ij, the aggregate elastic moduli (B, G, E), Poisson's ratio, and the elastic anisotropy with pressure have been investigated. Through the quasi-harmonic Debye model considering the phonon effects, the isothermal bulk modulus, the thermal expansions, Grüneisen parameters, and Debye temperatures depending on the temperature and pressure are obtained in the whole pressure range from 0 to 60 GPa and temperature range from 0 to 1100 K as well as compared to available data.     

Phase transition, elastic, thermodynamic properties of zinc-blend BeSe from first-principles

The structural phase transition, elastic, thermodynamics properties of BeSe in zinc-blende were investigated by performing first-principles calculations within generalized gradient approximation. The phase transition pressure P_t between the B3 phase and the B8 phase of BeSe was determined. The pressure dependencies of elastic constants, shear modulus, Young's modulus, and Poisson's ratio of BeSe are calculated. The thermodynamic properties of the zinc-blende structure BeSe are calculated by using the quasi-harmonic Debye model. The pressure and temperature dependencies of the heat capacity and the thermal expansion coefficient, as well as the Grüneisen parameter are investigated systematically in the ranges of 0–50 GPa and 0–1200 K.     

First-principles investigations on elastic, phonon and thermodynamic properties of SrB6 under pressure

The elastic, phonon and thermodynamic properties of the divalent alkaline-earth hexaboride SrB₆ are investigated by using plane-wave pseudopotential density functional theory method. The calculated structure parameters and bulk modulus are well consistent with the available experiment and theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B₀, shear modulus G, Young's modulus E and Poisson's ratio σ are also presented. With these elastic parameters, we investigate the mechanical stability and compressibility of SrB₆. For the thermodynamic properties, both phonon and quasi-harmonic Debye model methods are adopted. Through the comparison with experimental and other theoretical results, we found the method of quasi-harmonic Debye model is a little better. Moreover, the phonon dispersion relations are also obtained. It is found that there are two LO/TO splitting around 5 THz and 26 THz, respectively.     

Electronic and thermodynamic properties of B2-FeSi from first principles

The electronic and thermodynamic properties of B2-FeSi have been investigated using the first-principles method based on the plane-wave basis set. The calculated equilibrium lattice constant is in good agreement with available experimental and theoretical data. Our results have shown that B2-FeSi was a narrow gap semiconductor of above 0.055 eV and exhibited metallic characteristics. The density of states (DOS) can also describe orbital mixing. Using the quasi-harmonic Debye model, the thermodynamic properties of B2-FeSi have been analyzed. Variations of the Debye temperature Θ_D, thermal expansion α, heat capacity C_v, entropy S and the Grüneisen parameter γ on temperature T and pressure P were obtained successfully in the ranges of 0-2400 K and 0-140 GPa.     

Characterization of cubic phase MgZnO/Si(1 0 0) interfaces

The microstructural properties of the Mg_xZn_1−xO/Si(1 0 0) interface were investigated using transmission electron microscopy (TEM) and chemical states of the heterostructure were studied by high resolution X-ray photoelectron spectroscopy (XPS). By analyzing the valence band spectra of thin Mg_xZn_1−xO/Si(1 0 0) heterostructures, the valence band offset between such Mg_0.55Zn_0.45O and Si(1 0 0) was obtained to be 2.3 eV. Using the cubic ternary thin films as insulators, metal-insulator-semiconductor (MIS) capacitors have been fabricated. Leakage current density lower than 3 × 10⁻⁷ A/cm² is obtained under the electrical field of 600 kV/cm by current-voltage (I-V) measurement. Frenkel-Poole conduction mechanism is the main cause of current leakage under high electrical field.     

Ab initio chemical kinetics for the reactions of HNCN with O(P) and O2

The kinetics and mechanisms of the reactions of cyanomidyl radical (HNCN) with oxygen atoms and molecules have been investigated by ab initio calculations with rate constant prediction. The doublet and quartet state potential energy surfaces (PESs) of the two reactions have been calculated by single-point calculations at the CCSD(T)/6-311+G(3df, 2p) level based on geometries optimized at the CCSD/6-311++G(d, p) level. The rate constants for various product channels of the two reactions in the temperature range of 300-3000 K are predicted by variational transition state and RRKM theories. The predicted total rate constants of the O(³P) + HNCN reaction at 760 Torr Ar pressure can be represented by the expressions k_total (O + HNCN) = 3.12 × 10⁻¹⁰ × T^−0.05 exp (−37/T) cm³ molecule⁻¹ s⁻¹ at T = 300-3000 K. The branching ratios of primary channels of the O(³P) + HNCN are predicted: k₁ for producing the NO + CNH accounts for 0.72-0.64, k₂ + k₉ for producing the ³NH + NCO accounts for 0.27-0.32, and k₆ for producing the CN + HNO accounts for 0.01-0.07 in the temperature range studied. Meanwhile, the predicted total rate constants of the O₂ + HNCN reaction at 760 Torr Ar pressure can be represented by the expression, k_total(O₂ + HNCN) = 2.10 × 10⁻¹⁶ × T^1.28exp (−12200/T) cm³ molecule⁻¹ s⁻¹ at T = 300-3000 K. The predicted branching ratio for k₁₁ + k₁₃ producing HO₂ + ³NCN as the primary products accounts for 0.98-1.00 in the temperature range studied.     

The pressure influence on the incommensurate-commensurate ferroelectric phase transition in [4-NH2C5H4NH][SbCl4]

The dielectric properties of the [4-NH₂C₅H₄NH] SbCl₄ (abbreviated as 4-APCA) crystal were investigated under hydrostatic pressure up to 300 Mpa. The pressure-temperature phase diagram was given. The paraelectric-ferroelectric phase transition (II→III) temperature (T_c) increases linearly with increasing pressure with a slope dT_c/dp=21×10⁻² K/MPa. The pressure dependence of Curie-Weiss constants has been evaluated also. In the paraelectric phase (II) the Curie constant (C₊) was pressure dependent whereas the C₋ constant over the ferroelectric phase (III) was almost constant. The results are interpreted in terms of improper and displacive type phase transition model with a soft phonon at a zone boundary.     

Structural and thermodynamic properties of the cubic perovskite BiAlO3

The structural and elastic properties of the cubic perovskite-type BiAlO₃ are studied using the pseudopotential plane wave method within the local density approximation. The calculated structural parameters are in good agreement with previous calculations. The elastic constants are calculated using the static finite strain technique. Thermal effects on some macroscopic properties of BiAlO₃ are predicted using the quasi-harmonic Debye model, in which the lattice vibrations are taken in account. We have obtained successfully the variations of the lattice constant, volume expansion coefficient, heat capacities and Debye temperature with pressure and temperature in the ranges of 0-30 GPa and 0-1000 K.     

On the mechanism of decomposition of the benzyl radical

The C₇H₇ potential energy surface was studied from first principles to determine the benzyl radical decomposition mechanism. The investigated high temperature reaction pathway involves 15 accessible energy wells connected by 25 transition states. The analysis of the potential energy surface, performed determining kinetic constants of each elementary reaction using conventional transition state theory, evidenced that the reaction mechanism has as rate determining step the isomerization of the 1,3-cyclopentadiene, 5-vinyl radical to the 2-cyclopentene,5-ethenylidene radical and that the fastest reaction channel is dissociation to fulvenallene and hydrogen. This is in agreement with the literature evidences reporting that benzyl decomposes to hydrogen and a C₇H₆ species. The benzyl high-pressure decomposition rate constant estimated assuming equilibrium between the rate determining step transition state and benzyl is k₁(T) = 1.44 × 10¹³T^0.453exp(−38400/T) s⁻¹, in good agreement with the literature data. As fulvenallene reactivity is mostly unknown, we investigated its reaction with hydrogen, which has been proposed in the literature as a possible decomposition route. The reaction proceeds fast both backward to form again benzyl and, if hydrogen adds to allene, forward toward the decomposition into the cyclopentadienyl radical and acetylene with high-pressure kinetic constants k₂(T) = 8.82 × 10⁸T^1.20exp(1016/T) and k₃(T) = 1.06 × 10⁸T^1.35exp(1716/T) cm³/mol/s, respectively. The computed rate constants were then inserted in a detailed kinetic mechanism and used to simulate shock tube literature experiments.     

Insight into structural,mechanical, electronic and thermodynamic properties of intermetallic phases in Zr–Sn system from first-principles calculations

The structural, phase stabilities, mechanical, electronic and thermodynamic properties of intermetallic phases in Zr–Sn system are investigated by using first-principles method. The equilibrium lattice constants, enthalpy of formation (ΔH^form) and elastic constants are obtained and compared with available experimental and theoretical data. The configuration of Zr₄Sn is measured with reasonable precision. The ΔH^form of five hypothetical structures are obtained in order to find possible metastable phase for Zr–Sn system. The mechanical properties, including bulk modulus, shear modulus, Young's modulus and Poisson's ratio, are calculated by Voigt–Reuss–Hill approximation and the Zr₅Sn₄ and Zr₅Sn₃ show excellent mechanical properties. The electronic density of states for Zr₅Sn₄, Zr₅Sn₃ and cP8-Zr₃Sn are calculated to further investigate the stability of intermetallic compounds. Through the quasi-harmonic Debye model, the Debye temperature, heat capacity and thermal expansion coefficient under temperature of 0–300 K and pressure of 0–50 GPa for Zr₅Sn₃ and Zr₅Sn₄ are deeply investigated.     

高压下TiC的弹性、电子结构及热力学性质的第一性原理计算

利用基于密度泛函理论的第一性原理平面波赝势方法 并结合准谐徳拜模型研究了NaCl结构的TiC在高压下的弹性性质、电子结构和热力学性质. 计算所得零温零压下的晶格常数、体弹模量及弹性常数与实验值符合得很好. 零温下弹性常数和弹性模量随压强增大而增大. 通过态密度和电荷密度的分析, Ti-C键随压强增大而增强. 运用准谐德拜模型, 成功计算了TiC在高温高压下的体弹模量、熵、热膨胀系数、徳拜温度、 Grüneisen参数和比热容. 结果表明压强对体弹模量、热膨胀系数和徳拜温度的影响大于温度对其的影响. 热容随着压强升高而减小, 在高温高压下, 热容接近Dulong-Petit极限.     

High-temperature electrical properties of magnesiowustite Mg1 − xFexO and spinel Fe3 − x − yMgxCryO4 ceramics

Phase relationships, thermal expansion and electrical properties of Mg_1 − xFe_xO (x = 0.1-0.45) cubic solid solutions and Fe_{3 − x − y}Mg_xCr_yO_4 ± δ (x = 0.7-0.95; y = 0 or 0.5) spinels were studied at 300-1770 K in the oxygen partial pressure range from 10 Pa to 21 kPa. Increasing iron content enlarges the spinel phase stability domain at reduced oxygen pressures and elevated temperatures. The total conductivity of the spinel ceramics is predominantly n-type electronic and is essentially p(O₂)-independent within the stability domain. The computer simulations using molecular dynamics technique confirmed that overall level of ion diffusion remains low even at high temperatures close to the melting point. Temperature dependencies of the total conductivity in air exhibit a complex behavior associated with changing the dominant defect-chemistry mechanism from prevailing formation of the interstitial cations above 1370-1470 K to the generation of cation vacancies at lower temperatures, and with kinetically frozen cation redistribution in spinel lattice below 700-800 K. The average thermal expansion coefficients of the spinel ceramics calculated from dilatometric data in air vary in the range (9.6-10.0) × 10^− 6 K^− 1 at 300-500 K and (13.2-16.1) × 10^− 6 K^− 1 at 1050-1370 K. Mg_1 − xFe_xO solid solutions undergo partial decomposition on heating under oxidizing and mildly reducing conditions, resulting in the segregation of spinel phase and conductivity decrease.     

Theoretical study of the structural, elastic, electronic and thermal properties of the MAX phase Nb2SiC

Structural, elastic, electronic and thermal properties of the MAX phase Nb₂SiC are studied by means of a pseudo-potential plane-wave method based on the density functional theory. The optimized zero pressure geometrical parameters are in good agreement with the available theoretical data. The effect of high pressure, up to 40 GPa, on the lattice constants shows that the contractions along the c-axis were higher than those along the a-axis. The elastic constants C_ij and elastic wave velocities are calculated for monocrystal Nb₂SiC. Numerical estimations of the bulk modulus, shear modulus, Young’s modulus, Poisson’s ratio, average sound velocity and Debye temperature for ideal polycrystalline Nb₂SiC aggregates are performed in the framework of the Voigt-Reuss-Hill approximation. The band structure shows that Nb₂SiC is an electrical conductor. The analysis of the atomic site projected densities and the charge density distribution shows that the bonding is of covalent-ionic nature with the presence of metallic character. The density of states at Fermi level is dictated by the niobium d states; Si element has a little effect. Thermal effects on some macroscopic properties of Nb₂SiC are predicted using the quasi-harmonic Debye model, in which the lattice vibrations are taken into account. The variations of the primitive cell volume, volume expansion coefficient, bulk modulus, heat capacity and Debye temperature with pressure and temperature in the ranges of 0-40 GPa and 0-2000 K are obtained successfully.