Latex‐state NMR spectroscopy for quantitative analysis of epoxidized deproteinized natural rubber

Method of quantitative analysis through latex‐state ¹³C NMR spectroscopy was established for in situ determination of epoxy group content of epoxidized natural rubber in latex stage. The epoxidized natural rubber latex was prepared by epoxidation of deproteinized natural rubber with freshly prepared peracetic acid in latex stage. The resulting epoxidized deproteinized natural rubber (EDPNR) latex was characterized through latex‐state ¹³C NMR spectroscopy. Chemical shift values of signals of latex‐state ¹³C NMR spectrum for EDPNR were similar to those of solution‐state ¹³C NMR spectrum for EDPNR. Resolution of latex‐state ¹³C NMR spectrum was gradually improved as temperature for the nuclear magnetic resonance (NMR) measurement increased to 70°C. Signal‐to‐noise ratio of latex‐state ¹³C NMR measurement was similar to that of solution‐state ¹³C NMR measurement at temperature above 50°C. The epoxy group content determined through latex‐state NMR spectroscopy was proved to be the same as that determined through solution‐state NMR spectroscopy. Copyright © 2017 John Wiley & Sons, Ltd.     

Structural and dynamic study of chemically modified polyHIPE by solid‐state 13C NMR spectroscopy

The structure of laboratory‐made polyHIPEs was successfully characterized by cross‐polarity/magic‐angle spinning, solid‐state ¹³C NMR experiments. The signals of vinyl groups appeared in the spectrum of the polyHIPE precursor PH? CH?CH₂, which was prepared by the polymerization of the divinylbenzene continuous phase from a highly concentrated reverse emulsion. This material was chemically modified by the regioselective free‐radical addition of thiols to the pendant vinyl groups. Spectra of materials modified by the grafting of C₈ and C₁₂ alkyl chains, PH? SC₈ and PH? SC₁₂, respectively, were produced. The signals of the vinyl groups disappeared in favor of methylene groups. This experiment clearly established that the alkyl chains were covalently bound to the polymer. To elucidate the dynamic aspect of long chains in polyHIPE, we measured the ¹³C spin–lattice relaxation times (T₁) of PH? SC₁₂ from 25 to 100 °C with variable‐temperature, solid‐state, high‐resolution ¹³C NMR spectroscopy, revealing a strong variation in T₁ along the alkyl side chain. Furthermore, the crystallinity of a wide range of chemically modified polyHIPEs, including PH? SC₁₂, was studied with pulse ¹H NMR. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 956–963, 2001     

Structural characterization of monomeric and oligomeric arylamides by solution and solid‐state NMR spectroscopy

An extensive study of both liquid‐ and solid‐state NMR spectroscopy was undertaken in order to elucidate the structural features of a phenyleneterephthalamide oligomer (OPTA) and of some related diarylamides. 1D‐ and 2D‐COSY measurements allowed us to assign completely the proton signals of the title compounds in solution, while 1D‐, 2D‐HETCOR and 2D‐COLOC measurements were used to assign ¹³C resonances. Solid‐state ¹³C NMR experiments, by conventional cross‐polarization (CP) at different contact times and with the dipolar dephased CP technique, were used to characterize these molecules in the solid state. Such techniques allowed us to differentiate among different carbon atoms; in the resulting spectra it was then possible to observe the selective appearance of signals from protonated and quaternary carbon atoms. It was also ascertained that the limited structural mobility of the insoluble OPTA, existing as a single monophasic species, can be explained in terms of hydrogen‐type bonds present in the solid state. Copyright © 2002 John Wiley & Sons, Ltd.     

Critical comments on accuracy of quantitative determination of natural humic matter by solid state (13)C NMR spectroscopy

Structural information of natural organic matter (NOM) at the molecular level is very essential in understanding their nature and reactivity. Nuclear magnetic resonance (NMR) is an excellent tool for estimating the gross chemical composition of the very complex humic matter (HM). A well-known fact is that the solid state ¹³C NMR spectral analysis is very parameter-sensitive especially in the study of the heterogenous HM (e.g. baseline corrections, different pulse techniques and spinning rates of the rotor vs. different disruptive sidebands in the spectra). This being the case, it has been emphasized the importance of qualitative and quantitative analyses for generating as real spectra as possible by means of different pulse and polarization techniques, sampling spinning rates as well as certain correction factors. In the present study a practical accuracy for quantitative determination of NOM type material by solid state ¹³C NMR spectroscopy was assessed using a known HM sample. Different magnetic-field strengths, sampling spinning rates, single and ramped amplitude cross polarization techniques and TOSS pulse sequence were applied for obtaining a more reliable insight into the disruptive effect of the chemical shift anisotropy (CSA), especially the most disturbing first order spinning side bands (SSB). The results demonstrated that the SSB problem is not so significant as sometimes stated, at least in the context of HM samples and in the light of the overall reproducibility and uncertainty connected with the sample itself.     

三取代环丙烷的^1^3C核磁共振谱研究

前文曾报道三取代环丙烷的质子核磁共振谱及其解析结果,讨论了取代基对化学位移和偶合常数的影响.环丙烷的~(13)C核磁共振谱研究报道极少。Monti等人研究了甲基、溴代和乙炔基环丙烷的~(13)C核磁共振谱,发现在多取代的环丙烷中,取代基相互之间的影响是很显著的.Clague等人亦报道了一系列环丙烷的~(13)C核磁共振谱,但未有详细的分析.本文报道10种尚未见载于文献的三取代环丙烷的~(13)C核磁共振谱,数据见表1. 在1,2,3-三取代环丙烷中,由于取代基的相互作用,影响环上碳的化学位移的因素是比较复杂的.从我们测定化合物的数据来看,取代基为CH_3的环上碳的平均化学位移为29.24     

Low temperature degradation and characterization of natural rubber

Low temperature degradation of natural rubber was performed with potassium persulfate (K₂S₂O₈, KPS) in the latex stage at 30 °C to accomplish a good processability of the rubber. Various grades of natural rubbers were used as a source rubber. Gel content, molecular weight and chemical structure of the rubbers were characterized by swelling method, size exclusion chromatography and ¹H NMR spectroscopy, respectively. The well characterized natural rubber was subjected to oxidative degradation with KPS at 30 °C. Mooney viscosity decreased when the latex was degraded with 1.0 phr of KPS and it was dependent upon the amount of KPS. Molecular weight and gel content of the degraded natural rubber were about one-half as low as those of the source rubber. Chemical structure of the rubber was analyzed through Fourier transform infrared and ¹H NMR spectroscopic methods. The degraded natural rubber was found to contain carbonyl and formyl groups as an evidence of the oxidative degradation. Tensile strength of a vulcanizate prepared from the degraded natural rubber was the same as that prepared from the source rubber, even though the gel content and the molecular weight of the degraded rubber were distinguished from those of the source rubber.     

13C shielding scale for MAS NMR spectroscopy

We have performed the direct measurements of ¹³C magnetic shielding for pure liquid TMS, solution of 1% TMS in CDCl₃ and solid fullerene. The measurements were carried out in spherical ampoules exploring the relation between the resonance frequencies, shielding constants and magnetic moments of ¹³C and ³He nuclei. Next the ¹³C shielding constants of glycine, hexamethylbenzene and adamantane were established on the basis of appropriate chemical shifts measured in the solid state. All the new results are free from susceptibility effects and can be recommended as the reference standards of ¹³C shielding scale in the magic angle spinning NMR experiments. Copyright © 2011 John Wiley & Sons, Ltd.     

热塑性酚醛树脂的13C NMR表征

采用一种新型环保工艺合成了热塑性酚醛(phenol novolac,PN)树脂,并采用13C NMR方法对其分子结构进行了分析,由谱图中各峰积分值定量计算出了o-o、o-p、p-p结构、支化结构、游离苯酚和醚键等其它结构所占比例分别约为19.42%、46.21%、22.32%、3.13%、4.24%和4.69%。与常规工艺生产的PN相比并无大的变化,但新型工艺从根本上解决了常规工艺带来的高浓度含苯酚废水污染的问题。研究发现催化剂浓度的提高可以减少支化结构的产生,反应温度的提高有利于o-o结构的生成,随着反应时间的延长,o-o、o-p、p-p3种结构增多。     

Structural characterization of polypyrrole in the solid state by high resolution 15N NMR spectroscopy [II]

The solid-state ¹⁵N CP/MAS NMR spectra and ¹⁵N spin-lattice relaxation times (T₁) of doped and dedoped ¹⁵N-labeled polypyrroles prepared by electrochemical polymerization, have been measured by means of high-resolution solid-state ¹⁵N NMR. The ¹⁵N signal of polypyrrole consists of four peaks decomposed by line shape analysis. The four peaks obtained have been assigned to the various structures of polypyrrole. Further, the half-width of the ¹⁵N NMR spectra of polypyrroles is discussed as related to the electrical conductivity. © 1995 John Wiley & Sons, Inc.     

Solid state13C NMR spectra of metal carbonyl clusters

The solid state¹³C NMR spectra of four¹³CO enriched carbonyl clusters having a tri-iron metallic core have been analyzed to provide structural and dynamic information. In Fe₃(CO)₁₂ (1), the high temperature spectra suggest the occurrence of large amplitude motions of the CO groups around their position at the vertexes of the coordination polyhedron in addition to the motion involving the Fe₃-triangle previously detected in the VT-¹³C MAS spectra.¹³C and³¹P NMR data of Fe₃(CO)₁₁PPh₃ (2) indicates the presence of one molecule in the asymmetric unit in apparent disagreement with the previously reported X-ray data. Furthermore, we show that structural information can be obtained from the chemical shift tensor components readily available from the analysis of the spinning sideband manifold.     

Characterization of amorphous carbon films by 13C CP MAS NMR spectroscopy

¹³C CP MAS NMR spectroscopy was used to characterize α-C:H materials generated from methane and hydrogen mixtures using a microwave plasma. Dipolar dephasing experiments indicate a range of T_dd making quantification of quaternary “diamond”-like carbons difficult. Unconstrained lineshape analysis is not suitable for the deconvolution of the NMR spectra, but linewidth constrained analyses gave reasonable results. © 1993 John Wiley & Sons, Inc.     

Structural determination of 3beta-stearyloxy-urs-12-ene from Maytenus salicifolia by 1D and 2D NMR and quantitative 13C NMR spectroscopy

Six pentacyclic triterpenoids, 3beta-stearyloxy-urs-12-ene (1), friedelin (2), 3beta-friedelinol (3), alpha-amyrin (4), beta-amyrin (5), and lupeol (6), have been isolated from the hexane extract of Maytenus salicifolia Reissek (Celastraceae) leaves. The molecular and structural formula as well as the stereochemistry of a new pentacyclic triterpene (1) were determined using data obtained from 1H and 13C NMR spectra, DEPT135 and by 2D HSQC, HMBC, COSY and NOESY experiments. The molecular formula C48H84O2 was established using quantitative 13C NMR, and the molecular weight (692 Da) was confirmed by elemental analysis and mass spectrometry (GC-MS).     

Structural Revision and Elucidation of the Biosynthesis of Hypodoratoxide by 13C,13C COSY NMR Spectroscopy

Feeding of (2,3,4,5,6‐¹³C₅)mevalonolactone to the fungus Hypomyces odoratus resulted in a completely labeled sesquiterpene ether. The connectivity of the carbon atoms was easily deduced from a ¹³C,¹³C COSY spectrum, revealing a structure that was different from the previously reported structure of hypodoratoxide, even though the reported ¹³C NMR data matched. A structural revision of hypodoratoxide is thus presented. Its absolute configuration was tentatively assigned from its co‐metabolite cis‐dihydroagarofuran. Its biosynthesis was investigated by feeding of (3‐¹³C)‐ and (4,6‐¹³C₂)mevalonolactone, which gave insights into the complex rearrangement of the carbon skeleton during terpene cyclization by analysis of the ¹³C,¹³C couplings.     

1H and 13C NMR spectral assignments of some natural abietane diterpenoids

An NMR study of 11 naturally occurring abietane diterpenoids is described. In addition to one‐dimensional NMR methods, including DPFGSE 1D‐NOE spectra, two‐dimensional shift‐correlated experiments [¹H,¹H COSY, ¹H,¹³C‐gHSQC ¹J(C,H) and ¹H,¹³C‐gHMBC ⁿJ(C,H) (n = 2 and 3)] were used for the complete and unambiguous ¹H and ¹³C chemical shift assignments of these substances. Copyright © 2003 John Wiley & Sons, Ltd.     

Ribbon-like microfiber of vulcanized and non-vulcanized natural rubber obtained by the solution blow spinning

Natural rubber (NR) microfibers were obtained from NR/chloroform solutions with or without vulcanization agents, by a solution blow spinning (SBS) technique. The microfibers showed a ribbon-like morphology with average widths ranging from 15 to 45 μm, depending on the processing conditions. Concentrations of 3%, 4%, and 5% (wt/vol) of NR/chloroform were compared; at 4% wt/vol the spinning process was most stable, and fiber width was the most homogeneous. Microfibrous NR membranes incorporating vulcanizing agents were treated at temperatures of 70, 80, and 90°C for 1, 2, 3, and 4 h. Membrane tensile strength and elongation at break varied with temperature and treatment time. The best result was found with the sample treated at 90°C for 3 h. In this case, the tensile strength and elongation at break was (4.9 ± 0.8) MPa and (867 ± 18) % which is about 310% and 330% higher than the values found for the same sample without the incorporation of vulcanizing agents. This expressive increase was attributed to the vulcanization of the rubber, which also provided a shift to a higher value of the glass transition temperature. Overall properties of the blow-spun films, especially the high elasticity-contraction, suggest they are attractive candidates for use in robotics, and biobased electronics including wearable sensors.     

Prevulcanized natural rubber latex/clay aerogel nanocomposites

Natural rubber latex (NR)/clay aerogel nanocomposites were produced via freeze-drying technique. The pristine clay (sodium montmorillonite) was introduced in 1-3 parts per hundred rubber (phr) in order to study the effect of clay in the NR matrix. The dispersion of the layered clay and the morphology of the nanocomposites were determined by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. Cure characteristics, thermal stability, and the crosslink density of thermal and microwave-cured NR and its composites were investigated. XRD patterns indicated that both intercalated and exfoliated structures were observed at loadings of 1-3 phr clay. SEM studies revealed that the clay aerogel structure was formed at 3 phr clay loading. The increment in Shore A hardness of nanocomposites compared with pure NR signified excellent polymer/filler interaction and the reinforcing effect of the clay to rubber matrix. This was supported by an increase in maximum rheometric torque and crosslink density. The crosslink density of clay-filled NR vulcanizate was found to increase with the pristine clay content in both thermal and microwave curing methods. However, microwave-cured 2 and 3 phr-filled NR vulcanizates exhibited higher crosslink density than those which were thermal-cured under the same curing temperature. In addition, thermal stability studies showed that pristine clay accelerated the decomposition of NR by showing a slight decrease in onset and peak decomposition temperatures along with clay content.     

Novel methods of automated structure elucidation based on 13C NMR spectroscopy

Three new approaches for automated structure elucidations of organic molecules using NMR spectroscopic data were introduced recently. These approaches apply a neural network 13C NMR chemical shift prediction method to rank the results of structure generators by their agreement of the predicted and experimental chemical shifts. These three existing implementations are compared using realistic example molecules. The applicability and reliability of such approaches is addressed.