Vanadium(V) adsorption onto goethite (α-FeOOH) at pH 1.5 to 12: a surface complexation model based on ab initio molecular geometries and EXAFS spectroscopy

We measured the adsorption of V(V) onto goethite (α-FeOOH) under oxic (P_O2 = 0.2 bar) atmospheric conditions. EXAFS spectra show that V(V) adsorbs by forming inner-sphere complexes as VO₂(OH)₂ and VO₃(OH). We predicted the relative energies and geometries of VO₂(O, OH)₂-FeOOH surface complexes using ab initio calculations of the geometries and energetics of analogue Fe₂(OH)₂(H₂O)₆O₂VO₂(O, OH)₂ clusters. The bidentate corner-sharing complex is predicted to be substantially (57 kJ/mol) favoured energetically over the hypothetical edge-sharing bidentate complex. Fitting the EXAFS spectra using multiple scattering shows that only the bidentate corner-sharing complex is present with Fe-V and V-O distances in good agreement with those predicted. We find it important to include multiple scattering in the fits of our EXAFS data otherwise spurious V-Fe distances near 2.8 Å result which may be incorrectly attributed to edge-sharing complexes. We find no evidence for monodentate complexes; this agrees with predicted high energies of such complexes. Having identified the Fe₂O₂V(OH)₂⁺ and Fe₂O₂VO(OH)⁰ surface complexes, we are able to fit the experimental vanadium(V) adsorption data to the reactions

     

On the protonation of oxo- and hydroxo-groups of the goethite (α-FeOOH) surface: A FTIR spectroscopic investigation of surface O-H stretching vibrations

The O-H stretching region of goethite particles evaporated at different levels of acidity was investigated by Attenuated Total Reflectance (ATR)-Fourier Transform InfraRed (FTIR) spectroscopy. Two-dimensional IR Correlation Spectroscopy was used to identify correlations between different sets of discrete surface OH stretches and a Multivariate Curve Resolution analysis was used to resolve the predominant spectral components. Two dominant groups of hydroxyls were identified on the basis of their differences in proton affinity. Group I hydroxyls appear as two 3698/3541 and 3660/3490 cm⁻¹ band pairs. Group II hydroxyls are manifested through the 3648 and 3578 cm⁻¹ bands at greater levels of surface proton loading. There is consequently no correlation between O-H stretching frequencies and proton affinity. Groups I and II were assigned to mostly singly- (-OH) and doubly- (μ-OH) coordinated hydroxyls, respectively. Stretches arising from triply-coordinated (μ₃-OH) are proposed to be embedded within the dominant O-H band of bulk goethite. The possibility that these sites contribute to Group I and II hydroxyls should, however, not be entirely dismissed without further investigations.A reexamination of Temperature Programmed Desorption (TPD)-FTIR data of one goethite sample evaporated from alkaline conditions [Boily J.-F., Szanyi J., Felmy A. R. (2006) A combined FTIR and TPD study on the bulk and surface dehydroxylation and decarbonation of synthetic goethite. Geochim. Cosmochim. Acta70, 3613-3624] provided further constraints to this band assignment by providing clues to the network of surface hydrogen bonds. Important cooperative effects between hydrogen-bonded surface hydroxyls are suggested to play a crucial role on the variations of the position and intensity of discrete O-H stretching bands as a function of protonation level and temperature.     

Surface complexation of Cu on birnessite (δ-MnO2): Controls on Cu in the deep ocean

Hexagonal birnessite (δ-MnO₂) is a close analogue to the dominant phase in hydrogenetic marine ferromanganese crusts and nodules. These deposits contain ∼0.25 wt.% Cu which is believed to be scavenged from the overlying water column where Cu concentrations are near 0.1 μg/L. Here, we measured the sorption of Cu on δ-MnO₂ as a function of pH and surface loading. We characterized the nature of the Cu sorption complex at pH 4 and 8 using EXAFS spectroscopy and find that, at pH 4, Cu sorbs to birnessite by inner-sphere complexation on the {0 0 1} surface at sites above Mn vacancies to give a three to fourfold coordinated complex with 6 Mn neighbors at ∼3.4 Å. At pH 8, however, we find that some Cu has become structurally incorporated into the MnO₂ layer by occupying the vacancy sites to give 6 Mn neighbors at ∼2.91 Å. Density functional calculations on and clusters predict a threefold coordinated surface complex and show that the change from surface complexation to structural incorporation is a response to protonation of oxygens surrounding the vacancy site. Consequently, we propose that the transformation between sorption via surface complex and vacancy site occupancy should be reversible. By fitting the Cu sorption as a function of surface loading and pH to the formation of the observed and predicted surface complex, we developed a surface complexation model (in the basic Stern approximation) for the sorption of Cu onto birnessite. Using this model, we demonstrate that the concentration of inorganic Cu in the deep ocean should be several orders of magnitude lower than the observed total dissolved Cu. We propose that the observed total dissolved Cu concentration in the oceans reflects solubilization of Cu by microbially generated ligands.     

Hydrated goethite (α-FeOOH) (1 0 0) interface structure: Ordered water and surface functional groups

Goethite(α-FeOOH), an abundant and highly reactive iron oxyhydroxide mineral, has been the subject of numerous studies of environmental interface reactivity. However, such studies have been hampered by the lack of experimental constraints on aqueous interface structure, and especially of the surface water molecular arrangements. Structural information of this type is crucial because reactivity is dictated by the nature of the surface functional groups and the structure or distribution of water and electrolyte at the solid-solution interface. In this study we have investigated the goethite (1 0 0) surface using surface diffraction techniques, and have determined the relaxed surface structure, the surface functional groups, and the three dimensional nature of two distinct sorbed water layers. The crystal truncation rod (CTR) results show that the interface structure consists of a double hydroxyl, double water terminated interface with significant atom relaxations. Further, the double hydroxyl terminated surface dominates with an 89% contribution having a chiral subdomain structure on the (1 0 0) cleavage faces. The proposed interface stoichiometry is ((H₂O)(H₂O)OH₂OHFeOOFeR) with two types of terminal hydroxyls; a bidentate (B-type) hydroxo group and a monodentate (A-type) aquo group. Using the bond-valence approach the protonation states of the terminal hydroxyls are predicted to be OH type (bidentate hydroxyl with oxygen coupled to two Fe³⁺ ions) and OH₂ type (monodentate hydroxyl with oxygen tied to only one Fe³⁺). A double layer three dimensional ordered water structure at the interface was determined from refinement of fits to the experimental data. Application of bond-valence constraints to the terminal hydroxyls with appropriate rotation of the water dipole moments allowed a plausible dipole orientation model as predicted. The structural results are discussed in terms of protonation and H-bonding at the interface, and the results provide an ideal basis for testing theoretical predictions of characteristic surface properties such as pK_a , sorption equilibria, and surface water permittivity.     

Influence of microbial hydroxamate siderophores on Pb(II) desorption from α-FeOOH

Siderophores are low-molecular weight organic molecules secreted by plants and micro-organisms in response to Fe stress. With stability constants commonly exceeding 10³⁰, siderophores are considered to have higher affinities for Fe(III) than for any other major or trace element dissolved in soil solution. However, several siderophores have affinities for trace metals that approach those for Fe(III), and certain actinides form siderophore complexes of surprisingly high stability. The purpose of this study was to examine the role of hydroxamate siderophores in controlling Pb sorption to an Fe(III) oxide adsorbent. Goethite [α-FeOOH], prepared by standard methods and identified by X-ray diffraction, gave a specific surface of 36 m² g⁻¹ as determined by N₂ multipoint BET analysis. Adsorption experiments were performed aseptically using a batch method with a goethite concentration of 1.0 g l⁻¹ and an ionic strength of 0.01 M NaClO₄. Soluble Pb and Fe were measured between pH 3 and 8 by first adding Pb (10 μM) and then siderophore (10, 20, or 40 μM) to the goethite suspension. Three hydroxamate siderophores were employed: desferrioxamine B (DFB), ferrichrome (FC), and rhodotorulic acid (RA). Following 20 h reaction, Pb and Fe in solution were measured by ICP–MS and ICP–AES, respectively. The efficacy of siderophore-mediated Pb desorption varied with siderophore type and generally increased with pH and siderophore/Pb molar ratio. Desferrioxamine B, at pH 6.5 and a DFB/Pb molar ratio of 4, solubilised nearly 25% of the total sorbed Pb. In the presence of 10 μM FC, Pb adsorption largely mimicked that for the siderophore-free system, whereas significant amounts of Pb were desorbed with 20 μM FC at pH >5.5. The dihydroxamate siderophore, RA, was the least effective Pb chelator, requiring 20 μM to desorb detectable amounts of Pb.     

Adsorption of Cr(VI) on γ-alumina in the presence and absence of CO2: Comparison of three surface complexation models

Adsorption of Cr(VI) on γ-alumina was investigated as a function of ionic strength (0.001, 0.01 and 0.1 M NaNO₃), pH (4-10), Cr(VI) concentration (10⁻⁴ or 10⁻⁵ M with 5 g/L solid) and pCO₂ (0, atmospheric, 2.5%). Cr(VI) sorption is significant at low pH and decreases with increasing pH, with 50% of the Cr(VI) adsorbed between pH ∼6.5 and 8. Adsorption varies little with ionic strength or pCO₂ under most of the studied conditions. However, at low pH under high ionic strength and especially at high ionic strength and high pCO₂, Cr(VI) sorption on γ-alumina is suppressed. The adsorption edge data were used to parameterize constant capacitance (CCM), diffuse double layer (DLM) and triple layer (TLM) surface complexation models. None of the models entirely captures the full range of observed adsorption dependence on ionic strength and sorbate/sorbent ratio. The best fits to the full dataset are produced by the CCM, mostly because it has ionic-strength dependent stability constants. The more sophisticated TLM, which requires the most fitting parameters, does not produce better fits than the simpler CCM or DLM approaches for the conditions tested in this study.     

A combined IR and XRD study of natural well crystalline goethites (α-FeOOH)

Acta Geochimica - Goethite (α-FeOOH) is one of the most abundant minerals on the Earth surface, occurring in temperate, tropical and equatorial climates. Fe in goethite can be substituted by...     

Photodissolution of lepidocrocite (γ-FeOOH) in the presence of desferrioxamine B and aerobactin

Batch adsorption and dissolution experiments with lepidocrocite (γ-FeOOH) and two siderophores, desferrioxamine B (DFOB) and aerobactin, were performed between pH 3 and 8 in the dark and under irradiation with UV-visible light. The increase in surface concentrations of adsorbed DFOB with increasing pH was explained in terms of electrostatic interactions between the protonated and charged terminal amine group of DFOB surface complexes and the charged lepidocrocite surface. The adsorption of aerobactin was consistent with the typical anion-like adsorption behavior of low molecular weight organic acids and indicated that the adsorption properties are strongly determined by the carboxylic acid groups. The adsorption experiments revealed furthermore that the Fe(III)-DFOB solution complex has a very low affinity for the surface, in contrast to Fe(III)-aerobactin solution complexes. In accordance with a surface-controlled mechanism of ligand-promoted dissolution, we found a linear correlation between dissolution rates of lepidocrocite and the surface concentrations of adsorbed DFOB. In the dark, 6- to 8-fold lower dissolution rate coefficients were determined for aerobactin in comparison to DFOB. These results suggested that aerobactin forms surface complexes that are less dissolution-active, characterized by a higher degree of multinuclear surface complexation and/or by less dissolution-active coordination modes of the involved iron-binding groups. For both DFOB and aerobactin, dissolution rate coefficients increased significantly under irradiation with UV-visible light. This increase was interpreted in terms of light-induced reduction of surface Fe(III), primarily by intrinsic photochemical processes of the lepidocrocite bulk phase, based on the observed photoreductive dissolution in the absence of organic ligands between pH 3 and 6. We hypothesize that the α-hydroxycarboxylate group of aerobactin may form a surface complex that additionally promotes photoreductive dissolution by a ligand-to-metal charge-transfer (LMCT) reaction, similar to citrate. However, LMCT reactions involving the α-hydroxycarboxylate group of aerobactin are rather ineffective, based on the comparison of light-induced dissolution rate coefficients determined in the presence of aerobactin and citrate.     

Geochemical controls on the formation of unconformity-type Au–U deposits (Northern Transbaikalia)

This study provides geochemical, mineralogical, and isotope data for rocks and ores from Lower Proterozoic black shale formations of the Kodar–Udokan structural and formational zone, which host the Khadatkanda gold—uranium deposit. The results indicate that the uranium and gold mineralizations were formed at different times in relation to different geodynamic settings. The gold mineralization is associated with the inception of the Syulban fault and has a juvenile source. The later Th–U mineralization originated during tectonic rejuvenation of the Syulban fault zone, while the sources of radioactive elements were presumably the underlying sediments of the Kodar Group, which are widespread throughout the area of the Baikal mountain region (BMR). Based on the above results, the Au–U mineralization in the study area can be recognized as unconformity-type deposits, analogous to the well-known deposits of Australia and Canada. In this connection, the Baikal mountain region has a good potential for the discovery of Au—U deposits.     

Aqueous–solid solution thermodynamic model of U(VI) uptake in C–S–H phases

Reliable thermodynamic models assessing the interaction of radionuclides with cementitious materials are important in connection with long-term predictions of the safe disposal of radioactive waste in cement-based repositories. In this study, a geochemical model of U(VI) interaction with calcium silicate hydrates (C–S–H phases), the main component of hardened cement paste (HCP), has been developed. Uranium(VI) sorption isotherms on C–S–H phases of different Ca:Si ratios (C:S) and structural data from spectroscopic studies provided the indispensable set of experimental data required for the model development. This information suggested that U(VI) is neither adsorbed nor incorporated in the Ca–O octahedral layers of the C–S–H structure, but rather is located in the interlayer, similar to Ca²⁺ and other cations. With a view to the high recrystallisation rates and the cryptocrystalline ‘gel-like’ structure of the C–S–H phases, these observations indicated a U(VI) uptake driven by the formation of a solid solution.     

零价铁吸附-还原溶液中U(VI)的实验研究

研究零价铁(Zero-valent iron,ZVI)去除溶液中的U(VI),分析了pH值、反应时间、ZVI投加量、铀溶液初始浓度、其它离子(Mg2+、Mn2+、Cl-、NO-3、CO2-3和Cu2+)等条件因素对U(VI)去除效果的影响,并讨论其去除机理。结果表明:ZVI对溶液中U(VI)有较好的去除作用,在pH=4,振荡时间为120min,ZVI投加量为1.6g/L,铀溶液初始浓度为10mg/L,铀去除量为4mg/g时,U(VI)的去除率可达到63.7%。其它离子实验结果表明:Mg2+、Mn2+、Cl-、NO-3对ZVI去除U(VI)影响不超过3%,CO2-3和Cu2+影响相对较大。ZVI去除溶液中U(VI)以还原沉淀和吸附作用为主,吸附-还原反应遵循一级化学反应动力学方程。     

Surface changes on a landslide affected high bluff in Dunaszekcső (Hungary)

This article presents results from the survey conducted on Dunaszekcs? loess bluff after the last major rotational sliding event in 2008. The study area is a region of 25×30 m located on loess bluff close to the recent scarp. The relative elevation change of the surface was surveyed in 2.5×5 m grid network in relation to a marked base point. The survey was conducted using simple equipment such as analogue theodolite and leveller with regular time interval during a year and control measurements were taken after six months. It was assumed that measurements to the nearest cm are sufficient to recognize vertical displacements of the surface. The study focused on identifying the pattern of general vertical movements for the study area by the relative movements of individual points. Our results show significant cm scale vertical displacements. Most of the grid points have a slow decreasing tendency, but close to the scarp a more significant displacement was found. The main character of the spatial pattern is subsidence, which is more definitive on southern part of the study area than the northern part. Our observations correlate with the broader geomorphological characteristics of loess bluffs along the Danube.     

Interaction of U(VI) with Äspö diorite: A batch and in situ ATR FT-IR sorption study

Pristine diorite drill cores, obtained from the Äspö Hard Rock Laboratory (HRL, Sweden), were used to study the retention properties of fresh, anoxic crystalline rock material towards the redox-sensitive uranium. Batch sorption experiments and spectroscopic methods were applied for this study. The impact of various parameters, such as solid-to-liquid ratio (2–200 g/L), grain size (0.063–0.2 mm, 0.5–1 mm, 1–2 mm), temperature (room temperature and 10 °C), contact time (5–108 days), initial U(VI) concentration (3 × 10⁻⁹ to 6 × 10⁻⁵ M), and background electrolyte (synthetic Äspö groundwater and 0.1 M NaClO₄) on the U(VI) sorption onto anoxic diorite was studied under anoxic conditions (N₂). Comparatively, U(VI) sorption onto oxidized diorite material was studied under ambient atmosphere (pCO₂ = 10^−3.5 atm). Conventional distribution coefficients, K_d, and surface area normalized distribution coefficients, K_a, were determined. The K_d value for the U(VI) sorption onto anoxic diorite in synthetic Äspö groundwater under anoxic conditions by investigating the sorption isotherm amounts to 3.8 ± 0.6 L/kg which corresponds to K_a = 0.0030 ± 0.0005 cm (grain size 1–2 mm). This indicates a weak U sorption onto diorite which can be attributed to the occurrence of the neutral complex Ca₂UO₂(CO₃)₃(aq) in solution. This complex was verified as predominating U species in synthetic Äspö groundwater by time-resolved laser-induced fluorescence spectroscopy (TRLFS). Compared to U sorption at room temperature under anoxic conditions, U sorption is further reduced at decreased temperature (10 °C) and under ambient atmosphere. The U species in aqueous solution as well as sorbed on diorite were studied by in situ time-resolved attenuated total reflection Fourier-transform infrared (ATR FT-IR) spectroscopy. A predominant sorbing species containing a UO₂(CO₃)₃⁴⁻ moiety was identified. The extent of U sorption onto diorite was found to depend more on the low sorption affinity of the Ca₂UO₂(CO₃)₃(aq) complex than on reduction processes of uranium.     

ATR-FTIR spectroscopic study of the adsorption of desferrioxamine B and aerobactin to the surface of lepidocrocite (γ-FeOOH)

The adsorption of two model siderophores, desferrioxamine B (DFOB) and aerobactin, to lepidocrocite (γ-FeOOH) was investigated by attenuated total reflection infrared spectroscopy (ATR-FTIR). The adsorption of DFOB was investigated between pH 4.0 and 10.6. The spectra of adsorbed DFOB indicated that two to three hydroxamic acid groups of adsorbed DFOB were deprotonated in the pH range 4.0-8.2. Deprotonation of hydroxamic acid groups of adsorbed DFOB at pH values well below the first acid dissociation constant of solution DFOB species (pK_a = 8.3) and well below the point of zero charge of lepidocrocite (pH_PZC = 7.4) suggested that the surface speciation at the lower end of this pH range (pH 4) is dominated by a surface DFOB species with inner-sphere coordination of two to three hydroxamic acids groups to the surface. Maximum adsorption of DFOB occurred at approximately pH 8.6, close to the first pK_a value of the hydroxamic acid groups, and decreased at lower and higher pH values.The spectra of adsorbed aerobactin in the pH range 3-9 indicated at least three different surface species. Due to the small spectral contributions of the hydroxamic acid groups of aerobactin, the interactions of these functional groups with the surface could not be resolved. At high pH, the spectral similarity of adsorbed aerobactin with free aerobactin deprotonated at the carboxylic acid groups indicated outer-sphere complexation of the carboxylate groups. With decreasing pH, a significant peak shift of the asymmetric carboxylate stretch vibration was observed. This finding suggested that the (lateral) carboxylic acid groups are coordinated to the surface either as inner-sphere complexes or as outer-sphere complexes that are strongly stabilized at the surface by hydrogen bonding at low pH.     

Sorption of uranium(VI) at the clay mineral–water interface

Batch experiments were conducted to study the sorption of uranium on selected clay minerals (KGa-1b and KGa-2 reference kaolinite, SWy-2 and STx-1b reference montmorillonite, and IBECO natural bentonite) as a function of pH (4–9) and 0.001, 0.01, and 0.025 M NaCl in equilibrium with the CO₂ partial pressure of the atmosphere. Uranium concentrations were kept below 100 μg L⁻¹ to avoid precipitation of amorphous Uranium-hydroxides. Solely PTFE containers and materials were used, because experiments showed significant sorption at higher pH on glass ware. All batch experiments were performed over a period of 24 h, since kinetic experiments proved that the common 10 or 15 min are in many cases by far not sufficient to reach equilibrium. Kaolinite showed much greater uranium sorption than the other clay minerals due to the more aluminol sites available. Sorption on the poorly crystallized KGa-2 was higher than on the well-crystallized KGa-1b. Uranium sorption on STx-1b and IBECO exhibited parabolic behavior with a sorption maximum around pH 6.5. Sorption of uranium on montmorillonites showed a distinct dependency on sodium concentrations because of the effective competition between uranyl and sodium ions, whereas less significant differences in sorption were found for kaolinite. The presence of anatase as impurity in kaolinite enhanced the binding of uranyl-carbonate complexes with surface sites. The kinetic of uranium sorption behavior was primarily dependent on the clay minerals and pH. A multisite surface complexation model without assuming exchange is based on the binding of the most dominant uranium species to aluminol and silanol edge sites of montmorillonite, respectively to aluminol and titanol surface sites of kaolinite. For eight surface species, the log_k was determined from the experimental data using the parameter estimation code PEST together with PHREEQC.     

The Formation Age of Pegmatites of the Mama Mica Belt: New U–Pb (ID-TIMS) Data on Zircons

Doklady Earth Sciences - New geochronological (U–Pb ID-TIMS) data on zircons from pegmatites of the Mama mica belt in the Baikal Highlands are presented. The ages obtained for the plagioclase...     

New Data on the Early Riphean Age (U–Pb,Shrimp-II) of Acid and Basic Effusives of the Gulf of Finland (Sommers Island,Russia)

Doklady Earth Sciences - This work presents data on the age of the volcanites of Sommers Island located to the south of the submarine extension of the Vyborg massif, as potential comagmates of...     

The first data on U–Pb (SHRIMP) dating of zircon from metamorphic rocks of the crystalline base of the Taigonos-Paren Uplift (southern margins of the Omolon Massif)

U–Pb SHRIMP dating of zircons from metamorphic rocks of the crystalline basement of the Omolon-Taigonos area (northeastern margins of Asia) has been used to determine the periods of early endogenic activity of the crust. These periods correlate to the time of formation of the magmatic rock protolith (3.2–3.3 Ga), the stage of regional metamorphism (2.6–2.8 Ga), and the superimposed granitization. The resulting data can be used to reconstruct the history of development of the crust in the Precambrian.