共查询到20条相似文献,搜索用时 78 毫秒
1.
在航空发动机叶片振动特性分析的过程中,分析模型边界约束条件的选取对计算结果真实与否至关重要。提出用弹性边界约束条件模型来模拟航空发动机叶片复杂的边界约束状态,给出了固定边界、弹性支撑边界约束条件下叶片振动分析方法。分别用两种不同类型的叶片模型进行了仿真计算,得到了两种边界约束条件下的计算结果。并对不同的计算模型下所得到的计算结果进行了分析比较,得到了一些有参考价值的结论。 相似文献
2.
《中国工程机械学报》2018,(6)
为了降低车辆行驶的燃油消耗量,采用动态规划算法对液压混合动力车辆控制进行优化,并对发动机燃油消耗量进行仿真验证.建立了液压混合动力车辆简图模型,推导出车辆发动机功率方程式.创建发动机能源消耗目标函数,添加约束条件,引用动态规划算法优化目标函数,得出液压混合动力发动机能源消耗的最优参数.设计车辆控制流程图,利用Matlab软件对优化结果进行仿真,并与优化前仿真结果形成比较.仿真结果表明:在无起停的情况下,优化后的液压混合动力车辆燃油消耗量降低了11.71%;在有起停的情况下,优化后的液压混合动力车辆燃油消耗量降低了19.01%.采用动态规划算法优化液压混合动力车辆参数,车辆制动释放的能量被回收,从而节约车辆行驶所消耗的燃油. 相似文献
3.
基于遗传算法的多级盘转子平衡方案优化设计 总被引:3,自引:2,他引:1
航空发动机多级盘转子平衡精度不高是造成发动机整机振动过大的主要原因之一,针对这一情况,提出了两种具有代表性的转子平衡工艺设计方案.通过采用遗传算法优化各级盘的角向安装位置,以降低当发动机高速旋转时由不平衡量引起的作用于轴承上的力和力矩.结果表明,方案二优于方案一,且与文献[3]的优化结果相比,作用于轴承上的力和力矩分别降低到0.83%和0.96%,大大地减少了不平衡量对航空发动机整机振动的影响. 相似文献
4.
5.
鱼雷摆盘发动机基本结构参数优化数学模型的研究 总被引:2,自引:0,他引:2
通过分析鱼雷摆盘发动机基本结构参数对发动机性能的影响 ,提出了摆盘发动机基本结构参数优化的一种数学模型 ,并用来进行某一型号摆盘发动机的基本结构参数设计 相似文献
6.
7.
8.
为实现机器人在多约束条件下的尺寸优化,提出一种基于多约束条件下的机器人尺寸优化方法.首先建立6足机器人的简化数学模型,并给出该机器人需要综合优化的设计尺寸;然后分析了该机器人存在的多种约束条件,并进行约束条件的综合.通过对该机器人的运动学求解和力雅克比矩阵的推导,得到机器人的关节转矩表达式;以关节转矩为目标函数,多约束... 相似文献
9.
10.
基于ANSYS的航空发动机压气机盘模态分析 总被引:1,自引:0,他引:1
何勇 《机械制造与自动化》2012,41(1):111-113
运用ANSYS软件对某航空涡轮发动机压气机盘进行了模态分析,得到了压气机盘的前10阶固有频率和振型,确定了压气机盘的振动特性,为压气机盘的结构优化和动力修改提供了参考依据. 相似文献
11.
以曲柄固定式斜盘发动机为研究对象,对其惯性力和惯性力矩进行了分析,得出结论:该型发动机完全可以实现自平衡,有利于提高发动机的运转平稳性、动力性和经济性. 相似文献
12.
平面机构综合优化目标函数加权系数的确定 总被引:2,自引:0,他引:2
本文将平面机构作用的机座系统抽象为三自由度强迫振动系统,研究振动力X、Y分量,振动力矩与系统响应之间关系。发现进行综合优化平衡时,加权系数大小与系统的固有属性(质量、刚度)有关。从而解决了综合优化目标函数加权系数数值的确定问题。与传统方法相比,文中所述目标函数构造方法可有效减小系统的振动响应。 相似文献
13.
电液伺服振动试验系统低速和换向时的非线性摩擦力测量和补偿是提高运输环境试验和地震模拟试验等控制精度的重要途径。为了定量获取液压振动台的非线性摩擦力,基于Stribeck效应建立了改进的电液伺服振动试验系统非线性摩擦力理论模型,并结合液压振动台的力平衡方程建立了非线性摩擦力待辨识参数的目标函数。提出一种基于位移闭环控制的简便方法对不同速度下的液压振动台油缸压力差进行测量,得到振动台液压缸与活塞杆之间的摩擦力随速度变化的数值规律。采用基于拟随机序列的混合遗传算法对非线性摩擦力理论模型的4个参数进行了辨识。试验结果证明了本研究方法的可行性,为液压振动试验系统加速度波形失真补偿提供了一定参考。 相似文献
14.
航空发动机动力涡轮单元体高速动平衡试验研究 总被引:2,自引:0,他引:2
针对涡轴发动机动力涡轮转子在高速动平衡后必须经过分解和重新装配才能装在发动机中使用而带来的不足,提出直接对动力涡轮单元体进行高速动平衡试验.完成单元体的动力特性计算,通过分析单元体在发动机中的安装情况,设计并实施单元体的平衡方案,在此基础上完成动力涡轮单元体的高速动平衡试验,效果良好,平衡后的单元体没有经过分解和重新装配直接装机使用,并在发动机整机台架试车中表现出良好的振动特性,单元体的高速动平衡完全有希望取代动力涡轮转子的高速动平衡,而发展成为一项生产平衡技术,有很高的工程应用价值. 相似文献
15.
缸盖螺栓工作的可靠性将严重影响柴油机运动件的整体动平衡、功率及油耗状况。将模糊设计与优化设计理论相结合,并引入熵理论,整理并推导出柴油机缸盖螺栓可靠性优化设计数学模型,通过Matlab编程实现数值解的计算及图形输出。该方法在DF8B型货运内燃机车装用的16V280ZJA型柴油机上进行了实例设计,结果表明,该方法设计的螺栓比原设计方案的质量减小了55.56%,优化效果十分明显。 相似文献
16.
This paper addresses the optimum dynamic balancing of planar parallel manipulators exemplified with a 2 DOF parallel manipulator articulated with revolute joints. The dynamic balancing is formulated as an optimisation problem such that while the shaking force balancing is accomplished through analytically obtained balancing constraints, an objective function based on the sensitivity analysis of shaking moment with respect to the position, velocity and acceleration of the links is used to minimise the shaking moment. Sets of optimisation results corresponding to various combinations of the elements of the objective function are evaluated in order to quantify their influence on the resulting shaking moment, ground forces and the driving torques. The results prove that the proposed optimisation approach can be used to completely eliminate the shaking force and to minimise the shaking moment transmitted to the frame of the parallel mechanism. For parallel manipulators or mechanisms with higher degrees of freedom, for which it is virtually impossible to obtain shaking force balancing conditions analytically, we propose an alternative constrained optimisation procedure. This procedure is based on the fact that while the magnitude of either the shaking force or the shaking moment can be bounded through including a set of constraints in the optimisation algorithm, the sensitivities of the other, either those of the shaking force or the shaking moment, can be minimised. 相似文献
17.
空间机构振动力与振动力矩平衡的研究 总被引:1,自引:0,他引:1
在空间机构动力平衡中应用质量动替代法,以空间球面四杆机构为例,提出空间机构中满足质量动替代条件的构件,应满足的质量分布矩阵,然后对些空间球面四杆机构的振动力与振动力矩进行了平衡。 相似文献
18.
19.
20.
A. A. Nuraini A. K. A. Mohd Ihsan M. J. M. Nor N. Jamaluddin 《Journal of Mechanical Science and Technology》2012,26(8):2405-2411
This paper presents the results of vibro-acoustic modeling and simulation using the finite element and the boundary element methods for the free piston engine structure. A model of the engine was constructed through the use of finite element software to perform a normal mode analysis of the engine structure. The objective was to determine the mode shapes and the natural frequency that contribute to engine structure vibration. Theoretical development of the engine balance motion and frequency response was also conducted. From the simulation and finite element analysis, the force response pattern of the engine vibration was determined and then compared with its natural frequency. The vibration data were used as the input data for noise analysis using the boundary element method. The integration of the finite element and the boundary element determined the noise-frequency data of the engine structure toward the occurrence of engine noise. The information can be used by designers to analyze engine specifications and structure, especially at the preliminary design stage. 相似文献