Preparation and study of two polysiloxanes with pendant hand-basket type calixarene stationary phases for capillary gas chromatography

In this study two novel pendant hand-basket type calixarene gas chromatography stationary phases were prepared by hydrosilylation of ω-undecenyloxymethyl dimethyl calix[4]-15C5 and ω-undecenyloxymethyl dimethyl calix[4]-18C6 with dichloromethane followed by condensation reaction with silanol-terminated polydimethylsiloxane. Important stationary phase properties of these two novel stationary phases such as column efficiency, polarity, and selectivity were examined and compared with those of ω-undecyloxymethyl-18-crown-6, 2,3-benzo-9-propyloxymethyl-15-crown-5 and 2,3-benzo-11-propyloxymethyl-18-crown-6. Excellent thermostability from 60 to 330°C with onset bleeding temperatures at 308°C have been found. The mechanism of specific selectivity for position isomers based on the calix[4]crown ether ring, the molecular size of the solute and its shape are discussed.     

Preparation of weak cation exchange packings based on monodisperse poly(chloromethylstyrene‐co‐divinylbenzene) particles and its chromatographic properties

Monodisperse poly (chloromethylstyrene‐co‐divinylbenzene) particles were firstly prepared by a two‐step swelling method. Based on this media, one kind of weak cation ion exchange packings was prepared. It was demonstrated that the prepared packings have comparative advantages for biopolymer separation with high column efficiency, low interstitial volume and low column backpressure, and have good resolution to proteins. The effects of salt concentration and pH of mobile phase on protein retentions were investigated. The properties of the weak cation ion exchange packings were evaluated by the unified retention model for mixed‐mode interaction mechanism in ion exchange and hydrophobic interaction chromatography.     

Novel ultra stable silica-based stationary phases for reversed phase liquid chromatography--study of a hydrophobically assisted weak acid cation exchange phase

A mixed-mode reversed-phase/weak cation exchange (RP/WCX) phase has been developed by introducing a small amount of carboxylate functionality into a hydrophobic hyper-crosslinked (HC) platform. This silica-based HC platform was designed to form an extensive polystyrene network completely confined to the particle's surface. The fully connected polymer network prevents the loss of bonded phase, which leads to superior hydrolytic stability of the new phase when compared to conventional silica-based phases. Compared to previously introduced HC phases the added carboxylic groups impart a new weak cation exchange selectivity to the base hydrophobic HC platform. The phase thus prepared shows a mixed-mode retention mechanism, allowing for both neutral organic compounds and bases of a wide polarity range to be simultaneously separated on the same phase under the same conditions. In addition, the new phase offers the flexibility that gradients in organic modifier, pH or ionic competitors can be used to affect the separation of a wide range of solutes. Moreover, the inherent weak acid cation exchange groups allow formic and acetic acid buffers to be used as eluents thereby avoiding the mass spectrometric ionization suppression problems concomitant to the use of non-volatile additives such as strong amine modifiers (e.g. triethylamine) or salts (e.g. NaCl) to elute basic solutes from the strong cation exchange phase which was previously developed in this lab. The use of the new phase for achieving strong retention of rather hydrophilic neurotransmitters and drugs of abuse without the need for ion pairing agents is demonstrated.     

Adjusting the chromatographic properties of poly(ionic liquid)‐modified stationary phases by substitution on the imidazolium cation

Poly(ionic liquid)‐modified stationary phases can have multiple interactions with solutes. However, in most stationary phases, separation selectivity is adjusted by changing the poly(ionic liquid) anions. In this work, two poly(ionic liquid)‐modified silica stationary phases were prepared by introducing the cyano or tetrazolyl group on the pendant imidazolium cation on the polymer chains. Various analytes were selected to investigate their mechanism of retention in the stationary phases using different mobile phases. Two poly(ionic liquid)‐modified stationary phases can provide various interactions toward solutes. Compared to the cyano‐functionalized poly(ionic liquid) stationary phase, the tetrazolyl‐functionalized poly(ionic liquid) stationary phase provides additional cation‐exchange and π‐π interactions, resulting in different separation selectivity toward analytes. Finally, applicability of the developed stationary phases was demonstrated by the efficient separation of nonsteroidal anti‐inflammatory drugs.     

Surface modification of porous graphite for ion exchange chromatography

Summary Three distinct types of weak anion exchanger have been prepared by adsorption of polyethyleneimine (PEI) on to porous graphite (PGC): PGC coated dynamically with PEI, PGC coated with. an insoluble monolayer of PEI, and PGC coated with a cross-linked polymeric PEI. Using model solutes iodate, bromide, nitrate and nitrite, dissolved in aqueous buffers, the modified PGC's show typical ion exchange behaviour, and give chromatographic performance similar to that of bonded ion-exchange silica gels. Retention is reduced by increasing the ionic strength of the buffer, and by increasing the pH. A mechanism to explain the observed trends is presented.     

Modifications of poly(methyl-3-propylthiol)siloxane to give stationary phases for open tubular supercritical fluid chromatography

Summary Poly(methyl-3-propylthiol)siloxane has been evaluated for use as stationary phase in open tubular columns for gas and supercritical fluid chromatography. Immobilization of the stationary phase was achieved by crosslinking with 2,4,6-trichloro-1,3,5-triazine. The poly(methyl-3-propylthiol)siloxane stationary phase film was in situ oxidized to the disulphide and sulphonic acid forms and both have been evaluated for use in supercritical fluid chromatography. Good selectivity towards polar polycyclic aromatic compounds has been shown. All the modified forms of the stationary phase were loaded with silver ions and were evaluated with regard to ligand exchange chromatography using supercritical fluid carbon dioxide as a mobile phase. The utility of the stationary phase, having sulphonic acid groups loaded with silver ions, has been demonstrated by separation of fatty acid methyl esters according to their unsaturation.Dedicated to Professor Leslie S. Ettre on the occasion of his 70th birthday.     

Glass bead grafting with poly(carboxylic acid) polymers and maleic anhydride copolymers

Glass beads were etched with acids and bases to increase the surface porosity and the number of silanol groups that could be used for grafting materials to the surfaces. The pretreated glass beads were functionalized using 3‐aminopropyltriethoxysilane (APS) coupling agent and then further chemically modified by reacting the carboxyl groups of carboxylic acid polymers with the amino groups of the pregrafted APS. Several carboxylic acid polymers and poly(maleic anhydride) copolymers, such as poly(acrylic acid) (PAA), poly(methacrylic acid) (PMA), poly(styrene‐alt‐maleic anhydride) (PSMA), and poly(ethylene‐alt‐maleic anhydride) (PEMA) were grafted onto the bead surface. The chemical modifications were investigated and characterized by FT‐IR spectroscopy, particle size analysis, and tensiometry for contact angle and porosity changes. The amount of APS and the different polymer grafted on the surface was determined from thermal gravimetric analysis and elemental analysis data. Spectroscopic studies and elemental analysis data showed that carboxylic acid polymers and maleic anhydride copolymers were chemically attached to the glass bead surface. The improved surface properties of surface modified glass beads were determined by measuring water and hexane penetration rates and contact angle. Contact angles increased and porosity decreased as the molecular weights of the polymer increased. The contact angles increased with the hydrophobicity of the attached polymer. The surface morphology was examined by scanning electron microscopy (SEM) and showed an increase in roughness for etched glass beads. Copyright © 2007 John Wiley & Sons, Ltd.     

Cyclam complexes of Cu(II) and Co(II) as stationary phases for gas chromatography

New macrocyclic stationary chemically bonded phases were synthesized and tested in gas chromatography conditions. The complexes of 1,4,8,11-tetraazacyclotetradecane with Cu(II) and Co(II) were bonded to the silica support through the (3-chloropropyl)triethoxysilane reactant. The packings obtained were analyzed by diffuse-reflectance ultraviolet–visible spectroscopy (DRUV–Vis), differential thermal gravimetry (DTG), porosimetry, and elementary analysis. Preliminary study of the novel silica gas chromatography (GC) stationary phases containing cyclam complexes was carried out using packed 1/8 in. i.d. columns. The study was conducted on: cyclic, linear and branched olefins, aromatic hydrocarbons and ethers. Characterization of interactions between the compounds mentioned and new stationary phases was based upon analysis of Kováts retention indices (I), difference between retention indices for two phases (ΔI), and molecular retention indices (ΔM_e). Results have shown that the new stationary phases interact sufficiently strongly with molecules of high electron density and can be applied in capillary gas chromatography for the analysis of light hydrocarbons.     

Preparation of a weak anion exchange/hydrophobic interaction dual‐function mixed‐mode chromatography stationary phase for protein separation using click chemistry

In this study, 3‐diethylamino‐1‐propyne was covalently bonded to the azide‐silica by a click reaction to obtain a novel dual‐function mixed‐mode chromatography stationary phase for protein separation with a ligand containing tertiary amine and two ethyl groups capable of electrostatic and hydrophobic interaction functionalities, which can display hydrophobic interaction chromatography character in a high‐salt‐concentration mobile phase and weak anion exchange character in a low‐salt‐concentration mobile phase employed for protein separation. As a result, it can be employed to separate proteins with weak anion exchange and hydrophobic interaction modes, respectively. The resolution and selectivity of the stationary phase were evaluated in both hydrophobic interaction and ion exchange modes with standard proteins, respectively, which can be comparable to that of conventional weak anion exchange and hydrophobic interaction chromatography columns. Therefore, the synthesized weak anion exchange/hydrophobic interaction dual‐function mixed‐mode chromatography column can be used to replace two corresponding conventional weak anion exchange and hydrophobic interaction chromatography columns to separate proteins. Based on this mixed‐mode chromatography stationary phase, a new off‐line two‐dimensional liquid chromatography technology using only a single dual‐function mixed‐mode chromatography column was developed. Nine kinds of tested proteins can be separated completely using the developed method within 2.0 h.     

Liquid chromatographic resolution of proline and pipecolic acid derivatives on chiral stationary phases based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid

Two liquid chromatographic chiral stationary phases based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid were applied to the resolution of the amide derivatives of cyclic α‐amino acids including proline and pipecolic acid. Among the five amide derivatives of proline, aniline amide was resolved best on the first chiral stationary phase, which contains two N–H tethering amide groups, with the separation factor of 1.31 and the resolution of 2.60, and on the second chiral stationary phase, which contains two N–CH₃ tethering amide groups, with the separation factor of 1.57 and the resolution of 5.50. Among the five amide derivatives of pipecolic acid, 2‐naphthyl amide was resolved best on the first chiral stationary phase with the separation factor of 1.30 and the resolution of 1.75, but 1‐naphthylmethyl amide was resolved best on the second chiral stationary phase with the separation factor of 1.30 and the resolution of 2.26. In general, the second chiral stationary phase was found to be better than the first chiral stationary phase in the resolution of the amide derivatives of cyclic α‐amino acids. In this study, the second chiral stationary phase was first demonstrated to be useful for the resolution of secondary amino compounds.     

Hydrophobic and cation exchange mechanisms in the retention of basic compounds in a polymeric column

A cation exchange retention mechanism concomitant with the well-known hydrophobic partition mechanism in a polymeric column has been observed and investigated. This exchange process is attributed to ionization of some acidic sites present in the polymer column at basic mobile phase pH values. Several drugs of different basicity have been chromatographed on a polymeric PLRP-S column with methanol-water and acetonitrile-water mobile phases. The cation exchange between the protonated basic drug and the buffer cations (Na+, K+ and BuNH4+) is observed at the pH range where the protonated drug and the ionized sites of the column coexist. This process produces a shift of the retention versus pH plot of the base to pH values lower than those expected from the pKa of the base as well as a maximum in the plot at basic pH values. These effects are more pronounced for acetonitrile-water mobile phases.     

Synthesis and characterization of poly(styrene‐maleic anhydride)‐montmorillonite nanocomposite

Poly(styrene‐maleic anhydride)‐montmorillonite nanocomposites were prepared by intercalation of layered montmorillonite with the polymer ions. Synthetic approaches including polymerization and phosphonium salt formation have been used for polymer intercalation and dispersion of the host layers in the polymer matrix. The ratio of the mineral in the composites ranged 30–50%. Wide‐angle X‐ray diffraction (WAXD) disclosed that the d₍₀₀₁₎ spacing between the internal lamellar surface were only expanding to about 13 and 15 Å according to the type of phosphonium salt suggesting packing of polymer molecules between the layers. Examination of these materials by scanning and transmission electron microscopy showed spherical nano size particles of average diameter, 350 nm. Copyright © 2002 John Wiley & Sons, Ltd.     

Preparation of poly(vinylphenylboronic acid) chain grafted poly(glycidylmethacrylate‐co‐ethylenedimethacrylate) beads for the selective enrichment of glycoprotein

Surface‐initiated atom transfer radical polymerization was successfully used to prepare 4‐vinylphenylboronic acid functionalized poly(glycidylmethacrylate‐co‐ethylenedimethacrylate) beads for the selective enrichment of glycoprotein from complex biological samples in this study. The modified bead surfaces were characterized using Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. The sorption behaviors, including adsorption isotherms, incubation time, and pH effect, were investigated. The results demonstrated that the boronated beads have a high affinity for glycoprotein, which is due to the well‐defined boronic acid brushes on the beads surfaces. Furthermore, the polyvinylphenylboronic acid grafted poly(glycidylmethacrylate‐co‐ethylenedimethacrylate) beads were used to efficiently enrich and purify glycoprotein from real egg white samples and α‐fetoprotein from human serum samples. The mass spectrometry results demonstrated that the polyvinylphenylboronic acid grafted poly(glycidylmethacrylate‐co‐ethylenedimethacrylate) beads are a suitable material for the enrichment of glycosylated protein from complex biological samples.     

A new synthetic route of 4,4′-hexafluoroisopropylidene-2,2-bis-(phthalic acid anhydride) and characterization of 4,4′-hexafluoroisopropylidene-2,2-bis-(phthalic acid anhydride)-containing polyimides

The title product 4,4′-hexafluoroisopropylidene-2,2-bis-(phthalic acid anhydride) was prepared from hexafluoroacetone and o-xylene as the starting materials by condensation, oxidation and dehydration three-step reaction sequence. It reacted with diamines in DMF or xylene to give polyimides by condensation polymerization. Thermal and viscosity analyses show that these polyimides have lower molecular weight but excellent thermal stability.     

Last ten years (2008–2018) of chiral ligand‐exchange chromatography in HPLC: An updated review

Chiral ligand‐exchange chromatography is one of the elective strategies for the direct enantioresolution of small chelating compounds: amino acids, diamines, amino alcohols, diols, small peptides, etc. Unlike other methods, the interaction between chiral selector and analyte enantiomers is mediated by a cation, thus producing diastereomeric ternary complexes. Two main approaches are conventionally applied in chiral ligand‐exchange chromatography. The first relies upon chiral stationary phases where the chiral selector is either covalently immobilized or physically adsorbed onto suitable packing materials (coated phases). In the second approach, chiral molecules are added to the eluent, thus generating chiral eluent systems. Among the advantages of chiral ligand‐exchange chromatography, the generation of UV/vis‐active metal complexes, and the use of commercially available or easy‐to‐synthesize chiral selectors, in combination to rather inexpensive achiral columns for coated phases and chiral eluents, are noteworthy. Besides amino acids and amino alcohols, other species have proven suitable for chiral ligand‐exchange chromatography applications. Recently, the use of either chiral ionic liquids or micellar liquid chromatography systems as well as the successful off‐column formation of diastereomeric complexes have expanded the selectivity profiles and application fields. All of these issues are touched in the review, shedding light to the contributions appeared in the last decade.     

Preparation and enantiomer separation behavior of selectively methylated β-cyclodextrin-bonded stationary phases for high performance chromatography

Native and three selectively methylated β-cyclodextrin (β-CD)-bonded stationary phases without an unreacted spacer arm for liquid chromatography were prepared, where heptakis(2-O-methyl)-β-CD, heptakis(3-O-methyl)-β-CD and heptakis(2,3-di-O-methyl)-β-CD were used as the methylated β-CDs. The enantiomer separation abilities of the resulting β-CD stationary phases for 12 pairs of dansylamino acid enantiomers and six pairs of N-3,5-dinitrobenzoyl amino acid methyl esters as model solutes were investigated. The effects of pH and methanol content of the mobile phase on the retention and resolution were examined to optimize the mobile phase conditions. The optimum resolution for the dansylamino acids was achieved using a mobile phase consisting of 1.0% triethylammonium acetate buffer (pH 5.0)–methanol (v/v 4/6) on the β-CD stationary phase. Heptakis(3-O-methyl)- and heptakis(2,3-di-O-methyl)-β-CD-bonded stationary phases showed little enantiomer separation abilities for the dansylamino acids. The heptakis(2-O-methyl)-β-CD-bonded stationary phase exhibited no enantioselectivities for those solutes.

For the N-3,5-dinitrobenzoyl amino acid methyl esters, the optimum resolution was achieved using a mobile phase consisting of 1.0% triethylammonium acetate buffer (pH 5.0)–methanol (v/v 9/1) on a heptakis(2-O-methyl)-β-CD stationary phase. The heptakis(2,3-di-O-methyl)-β-CD-bonded stationary phases exhibited no enantioselectivities for the N-3,5-dinitrobenzoyl amino acid methyl esters. β-CD and heptakis(3-O-methyl)-β-CD-bonded stationary phases had no enantiomer separation abilities for those solutes except for the N-3,5-dinitrobenzoyl phenylalanine methyl ester.     

Thermodynamic enantioseparation behavior of phenylthiohydantoin‐amino acid derivatives in supercritical fluid chromatography on polysaccharide chiral stationary phases

Thirteen pairs of enantiomers belonging to the same structural family (phenylthiohydantoin‐amino acids) were analyzed on two polysaccharide chiral stationary phases, namely, tris‐(3,5‐dimethylphenylcarbamate) of amylose (Chiralpak AD‐H) or cellulose (Chiralcel OD‐H) in supercritical fluid chromatography with a carbon dioxide/methanol mobile phase (90:10 v/v). Five different temperatures (5, 10, 20, 30, 40°C) were applied to evaluate the thermodynamic behavior of these enantioseparations. On the cellulose stationary phase, the retention, and separation trends were most similar among the set of probe analytes, suggesting that the chiral cavities in this stationary phase have little diversity, or that all analytes accessed the same cavities. Conversely, the retention and separation trends on the amylose phase were much more diverse, and could be related to structural differences among the set of probe analytes (carbon chain length in the amino acid residue, secondary amine in proline, existence of covalent rings, or formation of pseudo‐rings via intramolecular hydrogen bonds). The large variability of behaviors on the amylose phase suggests that the chiral‐binding sites in this chiral stationary phase have more variety than on the cellulose phase, and that the analytes did access different cavities.     

Preparative chromatography behavior of palmitoleic acid on octadecyl stationary phases with different densities

The availability of various high-purity unsaturated fatty acids has a wide range of needs due to their different activities. The nonlinear preparative chromatography behavior and principle for purification of palmitoleic acid with octadecyl bonded stationary phases were studied. The peak broadening and the concentration distribution of the target compounds were used to compare different C18 stationary phases. In preparative liquid chromatography, the C18 stationary phases with low, medium, and high bonding density showed different peak broadening and concentration distribution results. Medium bonding density C18 was suitable for the purification of ethyl palmitoleic acid. The forward broadening was much greater than the backward broadening on medium bonding density C18 column. And the highest concentration distribution of impurities and the main peak was not crossed in this column. Due to the low content of crude ethyl palmitoleic acid sample, a two-step purified method yields an oily product with purity of 96.57% in the GC method. This method would be universal and extensible for constructing purification method for other unsaturated fatty acids.     

Two zinc(II) complexes based on indole-3-acetic acid: crystal structures,fluorescence sensors,and ion exchange with mercury(II)

Two new coordination complexes, [Zn(IA)₂(phen)] (1) and [Zn(IA)₂(4,4′-bipy)] _n ?·?C₂H₅OH (2) (IAH?=?indole-3-acetic acid, phen?=?1,10-phenanthroline, 4,4′-bipy?=?4,4′-bipyridine), have been prepared and characterized by single-crystal X-ray diffraction. Complex 1 is mononuclear and 2 presents a 1-D zigzag chain, in which 4,4′-bipy connects the Zn(II) ions. Both complexes show fluorescence emissions and exhibit fluorescence quenching when Hg²⁺ ions are present. ICP, EDS, and SEM experiments reveal that zinc in both complexes can be exchanged by toxic mercury ions.     

Preparation and chromatographic characteristics of calix[4]arene polysiloxane as stationary phases for capillary gas chromatography

Summary Two new kinds of calix[4]arene derivatives, 5, 11, 17, 23-tetra-tert-butyl-25,27-bis(isopropylcarbamoyl-methoxy)-26,28-diundecenyloxy calix[4]arene (C[4]A) and 25,27-dibutoxy-5, 11, 17, 23-tetra-tert-butyl-26,28-diundecenyloxy calix[4]arene (C[4]B0, are prepared and then are polymized by two different processes. Three calix[4]arene polysiloxane stationary phases for capillary gas chromatography are obtained. Their chromatographic characteristics, including column efficiency, polarity, selectivity, glass-transition temperature and thermal stability are studied. Retention mechanisms are also discussed.