Resistance to hurricane disturbance of an epifaunal community on the continental shelf off North Carolina

Hurricane Diana was stalled over the continental shelf of central North Carolina on 11–13 September 1984 in the vicinity of a previously studied epifaunal community (30 m depth). Two research cruises following the hurricane used still camera and TV transects to obtain data which allowed an evaluation of stormrelated effects on taxa of algae, sponges, corals, echinoderms and fish. Analysis of 35-mm slides suggested no effects attributable to the hurricane except observations of damaged coral heads and dead mussels. Analysis of television transects indicated no storm related changes from the previous study in frequency of occurrence of large epibenthic taxa. Hurricane damage was much less than anticipated and it is hypothesized that these coral reef-type communities are adapted to or structured by strong bottom currents generated by the frequent passage of gales and that the passage of hurricanes causes little additional stress.     

A Wandering Population of the HexactinelIid Sponge Pheronema carpenteri on the Continental Slope off Morocco, Northwest Africa

Abstract. A photo transect along the continental slope off Morocco, Northwest Africa revealed an extensive population of the hexactinellid sponge Pheronema carpenteri ( thomson , 1869). The population forms a distinct band parallel to the depth contours between 740 and 820 m. Because of the long persistence of dead hexactinellid skeletons, living and dead individuals of P. carpenteri were recorded, together with the spicular remains of disintegrated individuals. Furthermore, the presence of small individuals and that of other epifaunal elements were recorded. The peaks of abundance of dead and living sponges, respectively. are not at the same depth, the maximum abundance of living individuals being above that of the dead ones; small, i.e ., probably young P. carpenteri individuals were observed only in the upper zone. This can be interpreted as a successional phenomenon, i.e ., the population of P. carpenteri has apparently 'moved' slowly up the slope. The fauna associated with the P. carpenteri population along the Moroccan coast seems to be much poorer than that associated with another band-shaped population in the Porcupine Seabight investigated by B ett & R ice (1992). indicating that the presence of dense hexactinellid populations does not invariably lead to conspicuous benthic faunal enrichment.     

Tectonics of a fast spreading center: A Deep-Tow and sea beam survey on the East Pacific rise at 19°30′ S

Sea Beam and Deep-Tow were used in a tectonic investigation of the fast-spreading (151 mm yr^-1) East Pacific Rise (EPR) at 19°30 S. Detailed surveys were conducted at the EPR axis and at the Brunhes/Matuyama magnetic reversal boundary, while four long traverses (the longest 96 km) surveyed the rise flanks. Faulting accounts for the vast majority of the relief. Both inward and outward facing fault scarps appear in almost equal numbers, and they form the horsts and grabens which compose the abyssal hills. This mechanism for abyssal hill formation differs from that observed at slow and intermediate spreading rates where abyssal hills are formed by back-tilted inward facing normal faults or by volcanic bow-forms. At 19°30 S, systematic back tilting of fault blocks is not observed, and volcanic constructional relief is a short wavelength signal (less than a few hundred meters) superimposed upon the dominant faulted structure (wavelength 2–8 km). Active faulting is confined to within approximately 5–8 km of the rise axis. In terms of frequency, more faulting occurs at fast spreading rates than at slow. The half extension rate due to faulting is 4.1 mm yr^-1 at 19°30 S versus 1.6 mm yr^-1 in the FAMOUS area on the Mid-Atlantic Ridge (MAR). Both spreading and horizontal extension are asymmetric at 19°30 S, and both are greater on the east flank of the rise axis. The fault density observed at 19°30 S is not constant, and zones with very high fault density follow zones with very little faulting. Three mechanisms are proposed which might account for these observations. In the first, faults are buried episodically by massive eruptions which flow more than 5–8 km from the spreading axis, beyond the outer boundary of the active fault zone. This is the least favored mechanism as there is no evidence that lavas which flow that far off axis are sufficiently thick to bury 50–150 m high fault scarps. In the second mechanism, the rate of faulting is reduced during major episodes of volcanism due to changes in the near axis thermal structure associated with swelling of the axial magma chamber. Thus the variation in fault spacing is caused by alternate episodes of faulting and volcanism. In the third mechanism, the rate of faulting may be constant (down to a time scale of decades), but the locus of faulting shifts relative to the axis. A master fault forms near the axis and takes up most of the strain release until the fault or fault set is transported into lithosphere which is sufficiently thick so that the faults become locked. At this point, the locus of faulting shifts to the thinnest, weakest lithosphere near the axis, and the cycle repeats.     

Input of Glaciomarine Sediments along the East Antarctic Continental Margin; Depositional Processes on the Cosmonaut Sea Continental Slope and Rise and a Regional Acoustic Stratigraphic Correlation from 40° W to 80° E

Multichannel seismic reflection data from the Cosmonaut Sea margin of East Antarctica have been interpreted in terms of depositional processes in the continental slope and rise area. A major sediment lens is present below the upper continental rise along the entire Cosmonaut Sea margin. The lens probably consists of sediments supplied from the shelf and slope, being constantly reworked by westward flowing bottom currents, which redeposited the sediments into a large scale drift deposit prior to the main glaciogenic input along the margin. High-relief semicircular or elongated depositional structures are also found on the upper continental rise stratigraphically above the regional sediment lens, and were deposited by the combined influence of downslope and alongslope sediment transport. On the lower continental rise, large-scale sediment bodies extend perpendicular to the continental margin and were deposited as a result of downslope turbidity transport and westward flowing bottom currents after initiation of glacigenic input to the slope and rise. We compare the seismostratigraphic signatures along the continental margin segments of the adjacent Riiser Larsen Sea, the Weddell Sea and the Prydz Bay/Cooperation Sea, focussing on indications that may be interpreted as a preglacial-glaciomarine transition in the depositional environment. We suggest that earliest glaciogenic input to the continental slope and rise occurred in the Prydz Bay and possibly in the Weddell Sea. At a later stage, an intensification of the oceanic circulation pattern occurred, resulting in the deposition of the regional plastered drift deposit along the Cosmonaut Sea margin, as well as the initiation of large drift deposits in the Cooperation Sea. At an even later stage, possibly in the middle Miocene, glacial advances across the continental shelf were initiated along the Cosmonaut Sea and the Riiser Larsen Sea continental margins.     

Impact of basin structure and evaporite distribution on salt tectonics in the Algarve Basin,Southwest Iberian margin

The SW Iberian margin developed as a passive margin during Mesozoic times and was later inverted during the mainly Cenozoic Alpine orogeny. The initial syn-rift deposits include a Lower Jurassic evaporite unit of variable thickness. In the onshore, this unit is observed to thicken basinward (i.e., southward), in fault-controlled depocenters, and salt-related structures are only present in areas of thick initial evaporites. In the offshore, multiple salt-structures cored by the Lower Jurassic evaporites are interpreted on seismic reflection data and from exploratory drilling. Offshore salt structures include the allochthonous Esperança Salt Nappe, which extends over an area roughly 40 × 60 km. The abundance of salt-related structures and their geometry is observed to be controlled by the distribution of evaporite facies, which is in turn controlled by the structure of rift-related faulting. This paper presents a comprehensive study of salt tectonics over the entire onshore and offshore SW Iberian passive margin (southern Portugal and Gulf of Cadiz), covering all aspects from initial evaporite composition and thickness to the evolution of salt-related structures through Mesozoic extension and Cenozoic basin inversion.     

Diagenetic alterations related to marine transgression and regression in fluvial and shallow marine sandstones of the Triassic Buntsandstein and Keuper sequence,the Paris Basin,France

The distribution of diagenetic alterations in Triassic fluvio-deltaic, quartzarenitic to sublitharenitic, lowstand systems tract (LST) sandstones of the Grès á Voltzia Formation, anastomosing fluvial, quartzarenitic transgressive systems tract (TST) sandstones of the Grès á Roseaux Formation, and shallow marine, quartzarenitic to sublitharenitic, TST sandstones of the Grès Coquiller Formation, the Paris Basin (France), can be linked to transgression and regression events, and thus to the sequence stratigraphic context. Near-surface eogenetic alterations, which display a fairly systematic link to the depositional facies and sequence stratigraphic framework, include: (i) cementation by meteoric water calcite (δ¹⁸O=−8.9‰ and δ¹³C=−9.1‰) in the fluvio-deltaic, LST sandstones, (ii) cementation by mixed marine–meteoric calcite (δ¹⁸O=−5.3‰ to −2.6‰ and δ¹³C=−3.9‰ to −1.3‰) and dolomite (δ¹⁸O=−4.6‰ to −2.6‰ and δ¹³C=−2.9‰ to −2.3‰) in the foreshore, TST sandstones and below parasequence boundaries (PB), and transgressive surface (TS), and in the shoreface, TST sandstones below maximum flooding surfaces (MFS), being facilitated by the presence of carbonate bioclasts, (iii) dissolution of detrital silicates and precipitation of K-feldspar overgrowths and kaolinite, particularly in the fluvio-deltaic, LST sandstones owing to effective meteoric water circulation, and (vi) formation of autochthonous glauconite, which is increases in abundance towards the top of the fluvio-deltaic, LST sandstones, and along TS, and in the shoreface, TST sandstones, by alteration of micas owing to the flux of seawaters into the sandstones during transgression, whereas parautochthonous glauconite is restricted to the TS sandstones owing to marine reworking. Mesogenetic alterations, which include cementation by quartz overgrowths and illite, display fairly systematic link to fluvio-deltaic, LST sandstones. This study has revealed that linking of diagenesis to transgression and regression events enables a better understanding of the parameters that control the spatial and temporal distribution of diagenetic alterations in sandstones and of their impact on reservoir quality evolution.     

The renavigation of Sea Beam bathymetric data between 9° N and 10° N on the East Pacific Rise

We present a gridded Sea Beam bathymetric map of a 5100 km² area between 9° and 10° N on the East Pacific Rise (included as a color separate accompanying this issue). The raw bathymetric data are renavigated using a technique for calculating smooth adjustments to navigation that incorporates absolute constraints from satellite fixes and acoustically-located explosive shots, and relative constraints from the misfit of bathymetric data at ship track crossovers. We describe a back-projection technique for gridding the bathymetric data that incorporates an approximation for the power distribution within a narrow-beam echo sounding system and accounts for the variable uncertainties associated with multi-beam data. The nodal separation of the resulting map is ~ 80 m in both latitude and longitude, and the sampling of grid points within a 60 × 85 km² region is in excess of 99%. A formal analysis of variance is applied to the gridded bathymetric data. For each grid point, the difference between the variance of data from within a track versus data from between tracks provides an upper bound on the magnitude of bathymetric misfits arising from navigational errors. The renavigation results in an 88% reduction in this quantity. We also examine the effects of renavigation on the misfit of magnetic and gravity data at crossovers and compare our results with other bathymetric surveys. A striking feature of the final bathymetric map is the sinuous regional shape of the rise axis. In plan view, the local trend of morphology sometimes varies by up to 15° and the distances separating changes in morphological trend are about 10–20 km. In cross section the slopes of the rise flanks are notably asymmetric and show some correlation with the offset of the axial magmatic system as detected by seismic methods.     

Temporal Variations of Benthic Bacterial Microflora on the Northwestern Mediterranean Continental Shelf and Slope

Abstract. Bacterial (direct and heterotrophic counts, heterotrophic potentials) and organic matter (org C, org N) parameters were studied over 2 years in the surface sediments of 3 stations located on the continental shelf (station A: 15m; station B: 35m) and slope (station C: 910m) in the northwestern Mediterranean Basin.
Although logistic constraints did not allow a satisfactory sampling periodicity in the offshore survey, some seasonal trends were still observable at the deepest station. Variations were quantitatively more important in the two shallow sediments (from 3×10² heterotrophic bacteria – ml^-1 in December 1984 to 10⁷ heterotrophic bacteria-ml^-1 in March 1986). Epifluorcsccncc direct counts were relatively constant (5×10⁸ cells-ml^-1), while heterotrophic potentials (with ¹⁴C labelled glucose and glutamic acid) showed a succession of very short pulses over the year. Different concentrations of organic matter (from 0.2% orgC at 15m to 0.8% orgC at 35m) appeared to sustain very similar bacterial numbers. Nevertheless, a certain relation between the seasonal evolution of bacterial and organic matter parameters was discernable. Although depth apparently had no measurable effect on maximal spring bacterial densities, it seemed to lessen the summer and winter decreases in the two shallow stations.     

Cold seeps at the salt front in the Lower Congo Basin II: The impact of spatial and temporal evolution of salt-tectonics on hydrocarbon seepage

This study investigates the distribution and evolution of seafloor seepage in the vicinity of the salt front, i.e., the seaward boundary of salt-induced deformation in the Lower Congo Basin (LCB). Seafloor topography, backscatter data and TV-sled observations indicate active fluid seepage from the seafloor directly at the salt front, whereas suspected seepage sites appear to be inactive at a distance of >10 km landward of the deformation front. High resolution multichannel seismic data give detailed information on the structural development of the area and its influence on the activity of individual seeps during the geologic evolution of the salt front region. The unimpeded migration of gas from fan deposits along sedimentary strata towards the base of the gas hydrate stability zone within topographic ridges associated with relatively young salt-tectonic deformation facilitates seafloor seepage at the salt front. Bright and flat spots within sedimentary successions suggest geological trapping of gas on the flanks of mature salt structures in the eastern part of the study area. Onlap structures associated with fan deposits which were formed after the onset of salt-tectonic deformation represent potential traps for gas, which may hinder gas migration towards seafloor seeps. Faults related to the thrusting of salt bodies seawards also disrupt along-strata gas migration pathways. Additionally, the development of an effective gas hydrate seal after the cessation of active salt-induced uplift and the near-surface location of salt bodies may hamper or prohibit seafloor seepage in areas of advanced salt-tectonic deformation. This process of seaward shifting active seafloor seepage may propagate as seaward migrating deformation affects Congo Fan deposits on the abyssal plain. These observations of the influence of the geologic evolution of the salt front area on seafloor seepage allows for a characterization of the large variety of hydrocarbon seepage activity throughout this compressional tectonic setting.     

东海陆坡不同类型海底峡谷的分布构造响应

利用1997-2001年在东海海域获得的多波束全覆盖测深数据和收集的部分高分辨率单道地震剖面,对东海陆坡海底峡谷的地形要素,如长度、弯曲度、平均坡度、剖面特征、头部和末端的水深等进行了详细的分析和统计.根据平面形态将海底峡谷划分为3种类型:直线型、蛇曲型和树枝型.海底峡谷主要分布于中段和南段的东海陆坡之上,平面形态特征总体上自北向南趋于复杂(直线型→蛇曲型→树枝型),规模逐渐增大,不同平面类型代表了峡谷不同的演化阶段.峡谷的分布格局和变化趋势主要受控于冲绳海槽扩张背景下的构造活动.     

末次盛冰期末期以来南海北部陆坡的陆源物质输入及其控制因素

通过对南海北部陆坡KNG5孔沉积物粒度、粘土矿物和14C年龄的综合分析, 探讨了南海北部陆坡的沉积物来源及其控制因素。物源分析表明, KNG5孔17.5-12.5ka BP的沉积物主要来源于珠江, 12.5ka BP 时粘土矿物组合突然发生改变, 并且自12.5ka BP以后, 高岭石含量总体稳定, 说明12.5ka BP时海平面已上升到相当的高度, 并且可能当时南海的现代环流系统已开始形成, 西行的广东沿岸流导致向外扩散的珠江物质减少, 由于受北太平洋深层水(NPDW)和黑潮(KC)南海分支的作用, 台湾成为此时沉积物的主要贡献者。KNG5孔17.5-11ka BP时期的粘土矿物和粒度变化主要受控于海平面和洋流系统的变化。全新世早期(11.0-8ka BP)平均粒径达到最细和1-2.2m 粒级含量达到最高值可能是强盛的夏季风作用的结果。全新世中晚期(8—0ka BP) 1-2.2?m组分含量的减少是8ka BP以来东亚夏季风减弱的具体体现, 1-2.2m 粒级含量指示的东亚夏季风变化能和北半球其它季风指标能很好地对应起来, 说明这次季风减弱是北半球各个季风系统的共同现象。     

Review of three-dimensional ecological modelling related to the North Sea shelf system: Part 1: models and their results

The state-of-the-art in modelling the marine ecosystem of the greater North Sea is reviewed, providing an overview especially about three-dimensional models that describe and predict how the marine ecosystem of the greater North Sea area functions and how concentrations and fluxes of biologically important elements vary in space and time, throughout the shelf and over years, in response to physical forcing. Articles with a strong concentration on modelling were selected from the available literature, and all articles around the existing “ecological modelling groups” dealing with the area of the North Sea were sorted in chronological order of their appearance in the literature. We found eleven of such groups and described their different modelling efforts. Selecting the seven three-dimensional models (NORWECOM, GHER, ECOHAM, ERSEM, ELISE, COHERENS and POL3dERSEM), we characterized the complexity of the models, by comparing the resolution in time and space, and the resolution of the trophic structure by discussing the number and kind of state variables and of the processes relating these state variables to each other.The review of biogeochemical/ecological modelling for the greater North Sea shows that important findings by model simulations have either confirmed existing knowledge derived from field work or have given new insight into the mechanisms of the functioning of the North Sea system: the temporal and spatial development and magnitude of primary production, its spreading from the coasts to the north-west over the open North Sea, its mechanisms of limitation, the functioning of the pelagic small food web and of the benthic web, the mechanisms of nutrient regeneration, the effects of riverine and atmospheric nutrient inputs causing eutrophication of coastal waters, the extent of eutrophication in the North Sea, and the budgets for nitrogen, phosphorus, and silicon. The three-dimensional ecological models of the greater North Sea have provided consistent distributions and dynamics of the lower trophic levels on their regional, annual and decadal scales which cannot be derived to this degree of coverage by observations.The state-of-the-art in validation for these models is presented in part 2     

Physical and Geotechnical Properties and Assessment of Sediment Stability on the Continental Slope and Basin of the Bransfield Basin (Antarctica Peninsula)

Our investigation is centred on the continental slope of the Antarctic Peninsula and adjacent basin. Type of sediments, sedimentary stratigraphy, and physical and geotechnical characterization of the sediments have been integrated. Four different types of sediments have been defined: diamictons, silty and muddy turbidites, muddy, silty and muddy matrix embedded clast contourites. There is a close correspondence between the physical properties (density, magnetic susceptibility and p-wave velocity) and the texture and/or fabric as laminations and stratification. From a quantitative point of view, only a few statistical correlations between textural and physical properties have been found. Within the geotechnical properties, only water content is most influenced by texture. This slope, with a maximum gradient observed (20°), is stable, according to the stability under gravitational loading concepts, and the maximum stable slope that would range from 22° to 29°. Nevertheless, different instability features have been observed. Volcanic activity, bottom currents, glacial loading-unloading or earthquakes can be considered as potential mechanisms to induce instability in this area.     

Physical and Geotechnical Properties and Assessment of Sediment Stability on the Continental Slope and Basin of the Bransfield Basin (Antarctica Peninsula)

Our investigation is centred on the continental slope of the Antarctic Peninsula and adjacent basin. Type of sediments, sedimentary stratigraphy, and physical and geotechnical characterization of the sediments have been integrated. Four different types of sediments have been defined: diamictons, silty and muddy turbidites, muddy, silty and muddy matrix embedded clast contourites. There is a close correspondence between the physical properties (density, magnetic susceptibility and p-wave velocity) and the texture and/or fabric as laminations and stratification. From a quantitative point of view, only a few statistical correlations between textural and physical properties have been found. Within the geotechnical properties, only water content is most influenced by texture. This slope, with a maximum gradient observed (20°), is stable, according to the stability under gravitational loading concepts, and the maximum stable slope that would range from 22° to 29°. Nevertheless, different instability features have been observed. Volcanic activity, bottom currents, glacial loading-unloading or earthquakes can be considered as potential mechanisms to induce instability in this area.     

Modes of development of slope canyons and their relation to channel and levee features on the Ebro sediment apron, off-shore northeastern Spain

Six submarine slope canyons in an area of the northwestern Mediterranean, offshore from the Ebro River and Delta, were surveyed with bathymetric swathmapping (SeaBeam) and mid-range side-looking sonar (SeaMARC I). All of the canyons have slightly winding paths with concave-upwards gradients that are relatively steep shallower than 1,200 m. Two major types of canyons are identified on the basis of their morphologic character at the base of the slope; Type-I canyons lead to an unchannelled base-of-slope deposit and Type-II canyons are continuous with channel-levee systems that cross the rise.Four Type-I canyons were surveyed in the area. Two of these are broad, U-shaped, steep (average gradients of 1:14), do not indent the shelf, and terminate downslope at debris-flow deposits. These two canyons, the most northern in the area, have rounded heads with extensive gullies separated by knife-edge ridges. Relief of the canyon walls is about equal on both sides of the canyons, although the right-hand walls (looking downslope) are generally steeper. The other two Type-I canyons in the area are similar in that they do not indent the shelf, but they are much smaller and shallower and coalesce before terminating in the base-of-slope region. The two Type-II canyons that feed leveed-channels are U-shaped with flatter floors, longer profiles and gentler gradients than Type-I canyons. They are closer to the Valencia Valley and have relatively small cross-sectional areas.We propose a four-stage evolutionary sequence to explain the development of the canyons observed in this section on the prograding Ebro margin. During the initial stage, slumping and erosion on the slope creates a network of small gullies. During the next stage, headward growth of one (or more) gully leads to a major indentation of the shelf. This is the critical factor for developing a channel that will incise the slope and provide a major conduit for moving sediment to the basin. Stage 3 is characterized by the development of a continuous channel accompanied by levee growth across the lobe. In the final stage, the channel-levee system becomes inactive either through destruction by mass wasting, infilling of the channel, or loss of the major sediment source.     

Detection of free gas and gas hydrate based on 3D seismic data and cone penetration testing: An example from the Nigerian Continental Slope

We present a new method to characterize free gas, gas hydrates and carbonate concretions occurrence which are considered as high-risk factors for sub-sea developments in the Niger delta. This method is based on the combination of 3D seismic data to the geotechnical site characterizations using piezocone CPTU tests (Cone Penetration Test with additional measurement of the pore water pressure). A special processing of the 3D seismic data has enabled the determination of the interval compressional velocity. Using the effective-medium theory, velocity anomalies (negative and positive) within the first 15 m were translated in gas hydrate and free gas distribution. The calibration of the P wave velocity anomalies was done thanks to in-situ geotechnical testing carried out during two oceanographic surveys (2003 and 2004). Comparison between in-situ testing, recovered cores and the prediction of the gas and the gas hydrate distribution based on the compressional wave velocity have shown that 3D seismic data is a valuable tool to identify heterogeneous areas but the use of the piezocone was essential to discriminate between gas hydrate occurrences and carbonate concretions' presence. Furthermore, in-situ compressional wave velocity (V_p) measurements have clearly demonstrated what it was suspected from the 3D seismic data, the co-existence in the study area between gas hydrate and free gas.     

Salt tectonics and tear faulting in the central part of the Zagros Fold-Thrust Belt,Iran

The central part of the Zagros Fold-Thrust Belt is characterized by a series of right-lateral and left-lateral transverse tear fault systems, some of them being ornamented by salt diapirs of the Late Precambrian–Early Cambrian Hormuz evaporitic series. Many deep-seated extensional faults, mainly along N–S and few along NW–SE and NE–SW, were formed or reactivated during the Late Precambrian–Early Cambrian and generated horsts and grabens. The extensional faults controlled deposition, distribution and thickness of the Hormuz series. Salt walls and diapirs initiated by the Early Paleozoic especially along the extensional faults. Long-term halokinesis gave rise to thin sedimentary cover above the salt diapirs and aggregated considerable volume of salt into the salt stocks. They created weak zones in the sedimentary cover, located approximately above the former and inactive deep-seated extensional faults. The N–S to NNE–SSW direction of tectonic shortening during the Neogene Zagros folding was sub-parallel with the strikes of the salt walls and rows of diapirs. Variations in thickness of the Hormuz series prepared differences in the basal friction on both sides of the Precambrian–Cambrian extensional faults, which facilitated the Zagros deformation front to advance faster wherever the salt layer was thicker. Consequently, a series of tear fault systems developed along the rows of salt diapirs approximately above the Precambrian–Cambrian extensional faults. Therefore, the present surface expressions of the tear fault systems developed within the sedimentary cover during the Zagros orogeny. Although the direction of the Zagros shortening could also potentially reactivate the basement faults as strike-slip structures, subsurface data and majority of the moderate-large earthquakes do not support basement involvement. This suggests that the tear fault systems are detached on top of the Hormuz series from the deep-seated Precambrian–Cambrian extensional faults in the basement.     

苏北废黄河三角洲侵蚀后退过程及其对潮流动力的影响研究

以苏北废黄河三角洲及其毗邻海域的南黄海旋转潮波为研究对象,在恢复黄河北归以来苏北废黄河三角洲海岸不同发育阶段岸线位置和水下地形的基础之上,通过所建立的潮波数学模型,研究了在苏北废黄河三角洲不同演变阶段南黄海潮波运动的特征及其变化。研究表明:在1855年黄河北归前,由于废黄河口岸线向外突出20余千米且有宏大的水下三角洲,由北向南传播的潮波受到阻挡,处在其南侧的辐射沙脊区水动力相对较弱;随着江苏海岸线后退,废黄河口水下三角洲夷平,由北向南传播的潮波变得更加顺畅,南黄海旋转潮波得到不断加强,辐射沙脊北部的西洋水道及中南部的烂沙洋水道、小庙洪水道深槽区水动力随着废黄河三角洲的侵蚀后退,平均流速和最大流速均表现为增大的趋势。     

Forces and moment on a horizontal plate due to regular and irregular waves in the presence of current

This work presents an experimental study of a submerged plate used as a breakwater for coastal areas protection. Questions addressed concern the influence of current on the reflective power of the plate, and its influence on the hydrodynamic loads exerted on it. Results concern both monochromatic and irregular waves. Generally speaking, an influence of the current is found, changing the reflecting power of the structure up to 50%. A homogenized behavior of the loads and moments is found in the presence of currents, meaning that the load values become less sensitive to the frequency. Furthermore, the influence of waves reflected by the wave absorber, representing partially reflective conditions at the shore, is found to be of same order in the absence of current. In any case, the linear behavior of the breakwater is emphasized through the irregular waves approach.