Separation of the radioelements210Pb−210Bi−210Po by spontaneous deposition onto noble metals and verification by Cherenkov and liquid scintillation counting

A method for the separation of²¹⁰Pb,²¹⁰Bi and²¹⁰Po using spontaneous deposition has been developed. The²¹⁰Bi and²¹⁰Po are simultaneously removed by deposition onto nickel foil (copper and tin could also be used but less effectively) while the²¹⁰Po is separated from²¹⁰Bi, after dissolution of the nickel foil, by deposition onto silver foil. The effectiveness of each separation was evaluated by adding aliquot portions of each solution to a cocktail and counting with a liquid scintillation counter. Water was used as the medium to observe the Cherenkov count of the sample solution.     

A modified method for the sequential determination of 210Po and 210Pb in Ca-rich material using liquid scintillation counting

This research describes methods for the sequential determination of ²¹⁰Pb and ²¹⁰Po activity concentrations in Ca-rich ash samples collected from oil shale-fired power plants in Estonia. The procedure involves digestion of Ca-rich ash samples in a microwave digestion system, radiochemical separation of ²¹⁰Pb and ²¹⁰Po and their measurements. All samples, blanks and standards were measured by liquid scintillation counting (Quantulus 1220). The method was tested using IAEA (International Atomic Energy Agency) RGU-1 and IAEA-444 reference materials. Spectral calibration/peak identification which included the optimization of α/β discrimination system (pulse shape analyser), and recovery have been made by ²⁰⁹Po and ²¹⁰Pb standard solutions.

     

Simultaneous determination of alpha and beta-emitting nuclides by liquid scintillation counting

The determination of - and -emitting nuclides has been studied with a commercial liquid scintillation counter /Tri-Carb 2200CA/ equipped with Pulse Shape Analysis /PSA/. The results indicated that the efficiency for -emitters is virtually 100% and discrimination for -emitters is more than 99.9%. Liquid scintillation counting with PSA can be used for the determination of - and -emitting nuclides simultaneously.     

Simultaneous determination of 152Eu and 241Am in liquid solution by liquid scintillation counting

¹⁵²Eu and ²⁴¹Am are the most frequently used radiotracers in the separation studies on trivalent minor actinides and lanthanides. In almost all those studies, the determination of ¹⁵²Eu and ²⁴¹Am has been based on measuring their γ radiation by using a NaI(Tl) scintillation detector and/or a germanium detector. In this study, based on measuring the β particles and mono-energy electrons from ¹⁵²Eu and the α particles from ²⁴¹Am, we provide a new option to simultaneously determine the radioactivities of ¹⁵²Eu and ²⁴¹Am by liquid scintillation counting (LSC) with the aid of α/β discrimination. If the count rate ratio of ²⁴¹Am to ¹⁵²Eu is within the range of 100:1–1:100, the radioactivities of ¹⁵²Eu and ²⁴¹Am in mixed samples can be simultaneously determined by LSC with the errors less than 5 %. In addition, the interferences of ²⁴¹Am on Eu are divided into two parts: inside and outside the ²⁴¹Am region of interest. Only if the count rate ratio of ²⁴¹Am to Eu is more than 10:1, should the latter interference be in consideration.     

The role of Cherenkov and liquid scintilation counting in evaluating the anion-exchange separation of210Pb−210Bi−210Po

Using as eluent a sequence of 3M HCl, 12M HCl, and 8M HNO₃, a mixture of²¹⁰Pb,²¹⁰Bi, and²¹⁰Po may be clearly separated on a column of Dowex 1×2−100 anion exchange resin. A Cherenkov count in H₂O and the variation in count rate with time confirm that the nuclides emerge in the order²¹⁰Pb→²¹⁰Bi→²¹⁰Po. If 12M HCl is replaced by 1.5M H₂SO₄/2.3 M Na₂SO₄, a clean separation also results, but recovery of²¹⁰Po becomes considerably more difficult. All three nuclides are readily detectable by liquid scintillation counting, with the efficiency for²¹⁰Pb in the 60–70% range. The Cherenkov aqueous counting efficiency for²¹⁰Bi is ∼14–15%.     

Uranium determination in water samples by liquid scintillation counting after cloud point extraction

The aim of this study is the radiometric determination of uranium in waters by liquid scintillation counting (LSC) after pre-concentration of the element by cloud point extraction (CPE). For CPE, tributyl phosphate (TBP) is used as the complexing agent and (1,1,3,3-Tetramethylbutyl)phenyl-polyethylene glycol (Triton X-114) as the surfactant. The measurement is performed after phase separation by mixing of the surfactant phase with the liquid scintillation cocktail. The effect of experimental conditions such as pH, reactant ratio (e.g. m(TBP)/m(Triton), ionic strength (e.g. [NaCl]) and the presence of other chemical species (e.g. Ca²⁺ and Fe³⁺ ions as well as humic acid and silica colloids) on CPE has been investigated. According to the experimental results the total method efficiency is (13 ± 2)% and the chemical recovery (50 ± 10)% at pH 4 and reactant ratio (V(TBP)/V(Triton) = 0.1). Regarding the other parameters, generally Ca²⁺ and Fe³⁺ ions as well as the presence of colloidal species in solution (even at low concentrations) results in significant decrease of the chemical recovery of uranium. On the other hand increasing NaCl concentration leads to enhancement of chemical recovery. The detection limit under optimum experimental conditions has been found to be 0.5 Bq L^?1 indicating that the method could be applied only to waters samples with increased uranium concentration. Moreover, the negative effect of the chemical species found in natural waters limits the applicability of the method with the respect to environmental radioactivity measurements.     

Simultaneous determination of lead-210, gross beta and gross alpha activities of air filters by pulse shape discrimination liquid scintillation counting

A chemical procedure for transferring deposited solid matter from a cellulose filter into the liquid scintillation cocktail has been described. The influence of chemical and color quenching on alpha and beta detection efficiency, as well as on misclassification of beta and alpha pulses was corrected by an external standard method. Under the chosen pulse shape discrimination level (PSD), the alpha and beta detection efficiencies were above 85% and spillovers of alpha and beta pulses were below 10% and 2% respectively. Determination limits for samples containing up to 200 mg of mineral matter were 0.015 mBq m^–3 for alpha, 0.055 mBq.m^–3 for²¹⁰Pb and 0.055 mBq.m^–3 for beta activity (counting time 12000 s and volume of filtered air 1000 m³). The method has been applied for routine monitoring of²¹⁰Pb as well as for gross alpha and beta activities of longer-living radionuclides (T_1/2.>11 hrs) in suspended air matter.     

Simultaneous determination of35S and14C in double-labelled organic compounds by liquid scintillation counting

An isotope analytical method for the simultaneous determination of³⁵S and¹⁴C in double-labelled organic compounds by liquid scintillation counting is described. The sample is burned in a stream of oxygen. Sulfur oxides are converted to sulfuric acid and separated from other combustion products, including carbon-14 dioxide, on a heated quartz wool column previously wetted with hydrogen peroxide. Carbon dioxide is collected from the gas stream by an absorbent suitable for liquid scintillation counting. The residual sulfuric acid is rinsed off the column with water and the aqueous solution obtained is mixed with a liquid scintillation cocktail for radioactivity measurement. The final solutions ready for counting are obtained in less than fifteen minutes, quantitative collection recovery is achieved and no cross contamination occurs.     

Sequential analysis methodology for 210Po and uranium analysis by extractive liquid scintillation spectrometry

Journal of Radioanalytical and Nuclear Chemistry - A methodology for separation and purification of 210Po from uranium, thorium and daughters has been studied. Solvent extraction coupled with...     

Thorium determination in water samples by liquid scintillation counting after its separation by cloud point extraction

The aim of this study is the separation and pre-concentration of thorium from aqueous solutions by cloud point extraction (CPE) and its the radiometric determination by liquid scintillation counting (LSC). For CPE, tributyl phosphate (TBP) was used as the complexing agent and (1,1,3,3-Tetramethylbutyl)phenyl-polyethylene glycol (Triton X-114) as the surfactant. The radiometric measurements were performed after phase separation by mixing of the surfactant phase with the liquid scintillation cocktail. The effect of experimental conditions such as pH, ionic strength (e.g. [NaCl]) and the presence of other chemical species (e.g. Ca²⁺ and Fe³⁺ ions, and humic acid colloids) on the CPE separation recovery have been investigated at constant reactant ratio (m(TBP)/m(Triton) = 0.1). According to the experimental results the maximum chemical recovery is (60 ± 5)% at pH 3. Regarding the other parameters, generally Ca²⁺ and Fe³⁺ ions as well as the presence of colloidal species in solution (even at low concentrations) results in significant decrease of the chemical recovery of uranium. On the other hand increasing NaCl concentration leads to enhancement of chemical recovery. Generally, the method could be applied successfully for the radiometric determination of thorium in water solutions with relatively increased thorium content.     

Mutual separation of210Po,210Bi,and210Pb with solvent extraction using copper dithizonate −CCl4 and dithizone −CCl4 solutions

Displacement-extraction of tracer concentrations of²¹⁰Po in 1.0M (H, Na)NO₃ solutions has been studied by using copper dithizonate–CCl₄ solutions. Furthermore, based on the results of the displacement-extraction of polonium, a mixture of²¹⁰Po,²¹⁰Bi, and²¹⁰Pb of tracer concentrations in 1.0M (H, Na)NO₃ solutions could be satisfactorily separated with successive extractions by copper dithizonate–CCl₄ and dithizone–CCl₄ solutions in acidic conditions.     

Alpha-radiometry of seawater by liquid scintillation counting

Summary Liquid scintillation counting of the alpha-radionuclides after pre-concentration by cation-exchange represents a simple and robust method for the determination of total alpha-radioactivity in seawater. The total efficiency and the minimum detectable activity were calculated to be 95% and 30 mBq, respectively, for a liter sample and 1000-minute measuring time. The method has been applied successfully for the determination of alpha-radioactivity in seawater from five different coastal areas in Cyprus. The average alpha-radioactivity and uranium concentration were found to be 124±8 mBq ^. l^-1 and 3.2±0.2 mg ^. l^-1, respectively.     

Quantification of measurement uncertainty in the sequential determination of <Superscript>210</Superscript>Pb and <Superscript>210</Superscript>Po by liquid scintillation counting and alpha-particle spectrometry

Methodologies for the quantification of measurement uncertainties associated with the determination of ²¹⁰Pb- and ²¹⁰Po-specific activities by liquid scintillation counting (LSC) and alpha-particle spectrometry are presented, and are demonstrated using the soil reference material IAEA-326. Major contributors to the combined uncertainty associated with the measurement result of ²¹⁰Pb were the uncertainties of net count rates in the ²¹⁰Pb energy region of the sample spectrum and in the ²¹⁰Bi energy region of the blank spectrum. The predominant sources of uncertainty in the measurement of ²¹⁰Po were the uncertainties of net count rates in the regions of interest of ²⁰⁹Po and ²¹⁰Po. The relative standard uncertainty of ²¹⁰Po exponentially increases with the time interval between the sampling date and the separation date of Po, and this effect is strongly dependent on the ²¹⁰Po/²¹⁰Pb activity ratio. When the specific activity of ²¹⁰Pb is much higher than that of ²¹⁰Po in the sample, the relative standard uncertainty of the ²¹⁰Po determination increases significantly within a short time interval between the sampling date (or reference date) and the separation date of Po in samples.     

Simultaneous biphasic liquid scintillation determination of americium and plutonium

A procedure for the simultaneous determination of²⁴¹Am and²³⁹Pu or²³⁸Pu was carried out in samples such as air filters, sweep-tests, aqueous solutions and urine. The method described here includes a previous treatment of the samples in accordance with the type of matrix in which the actinides are included and a liquid scintillation counting using a two-phase cocktail. The upper detection limit was estimated to be 50 mBq for a 50-minute counting time.     

Simultaneous determination of vanadium and molybdenum as N-benzoyl-N-phenylhydroxamate complexes by combining solvent extraction and liquid chromatography

A normal-phase high-performance liquid chromatographic method for the selective simultaneous determination of vanadium and molybdenum with N-benzoyl-N-phenylhydroxylamine (BPHA) is described. The V(V)-BPHA and Mo(Vl)-BPHA complexes were preconcentrated by solvent extraction into chloroform and injected on to a nitrile-bonded column for chromatography. The mobile phase was a 5.9· 10⁻⁴ M solution of BPHA in chloroform (stabilized with amylene). The detection limits for vanadium and molybdenum were 2.1 and 3.3 ng ml⁻¹, respectively, for an aqueous to organic phase-volume ratio of 20:1. The procedure, applied to the analysis of a synthetic water, showed satisfactory accuracy and precision.     

Evaluation of measurement uncertainty in the determination of 210Pb and 210Po using beta counting and alpha spectrometry

 Measurement uncertainties in the determination of ²¹⁰Pb and ²¹⁰Po in Reference Material IAEA-300 (Baltic Sea Sediment) were evaluated. ²¹⁰Pb and ²¹⁰Po were separated from the matrix using an Sr resin column. The chemical yield of ²¹⁰Pb was determined gravimetrically in PbSO₄ form. Precipitation was followed by beta proportional counting after ²¹⁰Bi ingrowth. ²¹⁰Po was determined by alpha spectrometry after its spontaneous deposition on a Cu planchet. The major source of uncertainty was identified as the statistical counting uncertainty, which was also expected and is almost impossible to reduce without extension of the time required for an analysis. The expanded uncertainties were determined as 7.4% and 12.2% for ²¹⁰Pb and ²¹⁰Po, respectively. Received: 3 September 2002 Accepted: 3 December 2002 Acknowledgement This work was financially supported by Ministry of Education, Science and Sport, Republic of Slovenia (Project group PO-0106–0532). Presented at CERMM-3, Central European Reference Materials and Measurements Conference: The function of reference materials in the measurement process, May 30–June 1, 2002, Rogaška Slatina, Slovenia Correspondence to P. Vreˇcek     

Determination of 210Pb, 210Bi and 210Po in natural drinking water

A new method for the radioanalytical determination of the ²²²Rn progenies ²¹⁰Pb, ²¹⁰Bi and ²¹⁰Powill be presented, which has been improved for analyses of water samples fromdifferent regions in Austria. 1–2 liter samples were taken in polyethylenebottles prefilled with conc. HNO₃ to obtain 0.2M acidic solutions,thus avoiding adsorption effects. After adding 1.6 mg of inactive lead carrier,the water sample was evaporated to dryness, converted to the chloride formand dissolved in 1M HCl.     

Selective actinide solvent extraction used in conjunction with liquid scintillation

New commercial liquid scintillation counters allow rapid / measurements. Associated with liquid-liquid extraction techniques, rapid and selective actinide analyses are possible. Uranium, thorium and americium extractions with tri-n-octylphosphine oxide (TOPO) in toluene have been investigated. Detection limits of 40 mBq·l^–1 for -emitters are currently obtained with a Packard 2550 TR/AB^TM liquid scintillation analyzer.     

Radiochemical determination of210Po and210Pb in water

A method for²¹⁰Po and²¹⁰Pb determination in water samples is described. The nuclides are concentrated, in presence of added²⁰⁸Po and lead carrier, by evaporation. Then the polonium is plated electroless from the acidic solution on a copper planchet and measured by alpha spectrometry.²¹⁰Pb separation from the other isotopes is based on the solutility of PbSO₄ in citrate.²¹⁰Pb content is determined by measuring the activity of its daughter²¹⁰Bi. The critical steps in the isolation of lead have been examined and discussed.     

Radiometric determination of trace amounts of zinc using liquid scintillation counting

A sensitive and selective radiometric method of substoichiometric isotope dilution analysis for the determination of trace amounts of zinc is described. The activity of (65)Zn used as a tracer in this method was measured by liquid scintillation counting and its counting efficiency was found to be 76+/-2.7%. The method is based on the extraction of the ion-association complex of zinc from thiocyanate medium at pH 7.9 using substoichiometric amount of Aliquat-336 in toluene. The method is sensitive to 20 ng of Zn(II) in an aqueous phase volume of up to 15 ml and its reliability was tested by applying it to a certified reference material-magnesium alloy and pharmaceutical samples.