Facile synthesis and characterization of star‐shaped polystyrene: self‐condensing atom transfer radical copolymerization of N‐[4‐(α‐bromoisobutyryloxy)phenyl]maleimide and styrene

BACKGROUND: Generation of stars around in situ formed cores provides a facile approach to star‐shaped polymers. Therefore the self‐condensing atom transfer radical copolymerization (SCATRCP) of N‐[4‐(α‐bromoisobutyryloxy)phenyl]maleimide (BiBPM) and a large excess of styrene (St) was investigated. RESULTS: BiBPM and St formed a charge transfer complex (CTC), which underwent the SCATRCP, leading to the branched core initiating the atom transfer radical polymerization of St, finally giving star‐shaped polystyrene (PS). Kinetic and structural study showed that a higher dosage of BiBPM resulted in an enhanced polymerization rate, a higher degree of branching and a larger number of short PS arms. Differential scanning calorimetry suggested that the glass transition temperature of the star‐shaped PS decreased with molecular weight. Melt rheometry showed that even a slightly branched architecture of the PS led to a significantly lower viscosity; both the melt flow index and the activation energy increased with the degree of branching. CONCLUSION: Due to the preferential consumption of BiBPM and formation of a CTC, even a very low dosage of BiBPM could lead to star‐shaped PS, which, in comparison with linear analogues, could possess much better melt fluidity. Copyright © 2008 Society of Chemical Industry     

Synthesis of polydimethylsiloxane‐containing block copolymers via reversible addition fragmentation chain transfer (RAFT) polymerization

Low polydispersity polydimethylsiloxane (PDMS) was end functionalized with a reversible addition fragmentation chain transfer (RAFT) agent by the esterification of hydroxyl terminated PDMS with a carboxylic acid functional RAFT agent. These PDMS‐RAFT agents were able to control the free radical polymerization of styrene and substituted styrene monomers to produce PDMS‐containing block copolymers with low polydispersities and targeted molecular weights. A thin film of polydimethylsiloxane‐block‐polystyrene was prepared by spin coating and exhibited a microphase separated morphology from scanning force microscopy measurements. Controlled swelling of these films in solvent vapor produced morphologies with significant long‐range order. This synthetic route will allow the straightforward production of PDMS‐containing block copolymer libraries that will be useful for investigating their thin film morphological behavior, which has applications in the templating of nanostructured materials.© 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Spontaneous copolymerization of N‐butyl maleimide and ethyl α‐phenyl acrylate with high alternating tendency

The copolymerization of N‐butyl maleimide (BMI) and ethyl α‐phenyl acrylate (EPA) was successfully carried out without an initiator. A high alternating tendency was observed. The Q, e values were derived by Alfrey–Price equations: Q = 0.09, e = 0.81 for BMI and Q = 0.21, e = ?0.5 for EPA, and the monomer reactivity ratios were r_BMI = 0.15 ± 0.01 and r_EPA = 0.18 ± 0.08, respectively. In this system BMI was donor and EPA was acceptor. The maximum copolymerization rate and molecular weight appeared at 70 mol % (BMI) in the feed ratio. The spontaneous alternating copolymerization was considered to be completed by a contact‐type charge‐transfer complex formed by the monomer pairs. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 355–360, 2004     

Reversible addition–fragmentation chain transfer polymerization of styrene with benzoimidazole dithiocarbamate as a reversible addition–fragmentation chain transfer agent

Two novel dithiocarbamates [2‐Y‐benzoimidazole‐1‐carbodithioic acid benzyl esters: Y = methyl (1b) or phenyl (1c)] were synthesized and successfully used in the reversible addition–fragmentation chain transfer (RAFT) polymerization of styrene in bulk with thermal initiation. The effects of the temperatures and concentration ratios of the styrene and RAFT agents on the polymerization were investigated. The results showed that the polymerization of styrene could be well controlled in the presence of 1b or 1c. The linear relationships between ln([M]₀/[M]) and the polymerization time (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) indicated that the polymerizations were first‐order reactions with respect to the monomer concentration. The molecular weights increased linearly with the monomer conversion and were close to the theoretical values. The molecular weight distributions [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] were very narrow from 5.3% conversion up to 94% conversion (M_w/M_n < 1.3). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 560–564, 2006     

Conventional and RAFT radical copolymerizations of β‐pinene with N‐substituted maleimides

The feasibility of the radical copolymerizations of β‐pinene with three N‐substituted maleimides, i.e. N‐phenylmaleimide (PhMI), N‐methylmaleimide (MeMI), and N‐ethylmaleimide (EtMI), was clarified for the first time. The copolymerization rates decreased in the order PhMI > MeMI > EtMI. A marked penultimate effect on the activity of the N‐substituted maleimide‐terminated radicals was found in these copolymerizations. The penultimate monomer reactivity ratios evaluated by the nonlinear method were r₁ = 0.10, r′₁ = 8.30, r₂ = r′₂ = 0 for PhMI–β‐pinene, r₁ = 0.20, r′₁ = 7.09, r₂ = r′₂ = 0 for MeMI–β‐pinene, and r₁ = 0.16, r′₁ = 6.50, r₂ = r′₂ = 0 for EtMI–β‐pinene. Furthermore, the possible controlled copolymerizations of β‐pinene and N‐substituted maleimides were then attempted via the reversible addition‐fragmentation chain transfer (RAFT) technique. In the presence of RAFT agent 1‐phenylethyl phenyldithioacetate, the copolymerization of β‐pinene with MeMI or EtMI was retarded severely. However, much smaller retardation was observed in the RAFT copolymerization of β‐pinene with PhMI, and, more importantly, the copolymerization exhibited typical features of a controlled system. The solvent effect on the RAFT copolymerization of β‐pinene and PhMI was also investigated using matrix‐assisted laser desorption ionization time‐of‐fight mass spectrometry (MALDI‐TOF‐MS) analysis. The results clearly indicated that copolymerization in tetrahydrofuran suffered from competitive transfer and termination side‐reactions arising from the solvent in spite of the presence of the RAFT agent. Copyright © 2007 Society of Chemical Industry     

Copolymerization of styrene with an α‐olefin via atom transfer radical polymerization

This investigation reports the preparation of styrene–α‐olefinic random copolymers, using 1‐octene as an α‐olefin, via atom transfer radical polymerization. Atom transfer radical copolymerization of styrene with 1‐octene was successfully carried out using phenylethyl bromide as initiator and CuBr as catalyst in combination with N, N, N′, N″, N″‐pentamethyldiethylenetriamine as ligand. The copolymers had controlled molecular weight, narrow dispersity and well‐defined end groups with significant 1‐octene incorporation in the polymer. Incorporation of 1‐octene in the copolymers was confirmed using ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectroscopy. An increase in 1‐octene content in the monomer feed led to an increase in the level of incorporation of the α‐olefin in the copolymer. An increase in the concentration of 1‐octene led to a decrease in the rate of polymerization and an increase in dispersity. The glass transition temperature of the copolymer gradually decreased as the incorporation of 1‐octene increased. Copyright © 2011 Society of Chemical Industry     

Atom‐transfer radical polymerization of methyl methacrylate with α,α′‐dichloroxylene/CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine initiation system under microwave irradiation

The atom‐transfer radical polymerization (ATRP) of methyl methacrylate (MMA), using α,α′‐dichloroxylene as initiator and CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst was successfully carried out under microwave irradiation (MI). The polymerization of MMA under MI showed linear first‐order rate plots, a linear increase of the number‐average molecular weight with conversion, and low polydispersities, which indicated that the ATRP of MMA was controlled. Using the same experimental conditions, the apparent rate constant (k) under MI (k = 7.6 × 10^?4 s^?1) was higher than that under conventional heating (k = 5.3 × 10^?5 s^?1). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2189–2195, 2004     

Glass transition temperature of methyl methacrylate–ethyl α‐benzoyloxymethylacrylate copolymers

Poly(ethyl α‐benzoyloxymethylacrylate) (EBMA) and copolymers of methyl methacrylate (MMA) with EBMA have been prepared by free radical polymerization. Monomer precursors of ethyl α‐benzoyloxymethylacrylate have likewise been polymerized. Glass transition temperatures (T_g) of homo and copolymers have been determined by differential scanning calorimetry. The Johnston equation, which considers the influence of monomeric unit distribution on the copolymer glass transition temperature, has been used to explain the T_g behaviour. T_g12 has been calculated by the application of the Johnston equation, which gave a value markedly lower than the average value expected from the additive contribution of the T_g of the corresponding homopolymers. © 2000 Society of Chemical Industry     

Reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene using novel heterocycle‐containing chain transfer agents

BACKGROUND: Controlled/‘living’ radical polymerization is a new and robust method to synthesize polymers with predetermined molecular weight, narrow polydispersity and tailored architecture. Several methods have been developed but reversible addition‐fragmentation chain transfer (RAFT) has several advantages over the other methods. It has been reported that the effectiveness of RAFT agents depends strongly on the nature of the Z and R groups. RESULTS: Three new dithiocarbamates, namely (2‐ethoxy carbonyl)‐prop‐2‐yl‐pyrrole‐1‐carbodithioate (CTA‐A), (1‐phenyl ethyl)‐pyrazole‐1‐carbodithioate (CTA‐B) and (2‐ethoxy carbonyl)‐prop‐2‐yl‐pyrazole‐1‐carbodithioate (CTA‐C), were synthesized for studying the effect of the Z and R group of a chain transfer agent on the RAFT polymerization of styrene, initiated by 2,2′‐azobisisobutyronitrile. Well‐controlled molecular weight with narrow polydispersity (1.10–1.46) was achieved. The increase in molecular weight with conversion is linear and follows first‐order kinetics. CONCLUSION: The detailed kinetic results show that the structure of the activating (Z) group of dithiocarbamates has significant effects on the reactivity of dithiocarbamates towards the polymerization of styrene. In the homopolymerization of styrene it was found that, from the polydispersity index of polystyrenes obtained and the kinetic results, the pyrazole‐based dithiocarbamates (CTA‐B and CTA‐C) are very effective compared to the pyrrole‐based dithiocarbamate (CTA‐A). All the polymerizations show controlled living characters. Copyright © 2007 Society of Chemical Industry     

Functionalization of poly(ester‐urethane) surface by radiation‐induced grafting of N‐isopropylacrylamide using conventional and reversible addition–fragmentation chain transfer‐mediated methods

The functionalization of poly(ester‐urethane) (PUR) surface was conducted using radiation‐induced grafting. A thermosensitive layer constructed from N‐isopropylacrylamide (NIPAAm) was introduced onto a polyurethane film and characterized using attenuated total reflection Fourier transform infrared and X‐ray photoelectron spectroscopies and contact angle measurements. Size exclusion chromatography was used to analyse the PUR‐graft‐PNIPAAm copolymers and homopolymers formed in solution. Additionally, reversible addition–fragmentation chain transfer (RAFT) polymerization was performed in order to obtain PNIPAAm‐grafted surfaces with well‐defined properties. Atomic force microscopy was used to evaluate the surfaces synthesized via conventional and RAFT‐mediated grafting methods. The results of various techniques confirmed the successful grafting of NIPAAm from PUR film. © 2015 Society of Chemical Industry     

Reversible addition fragmentation chain transfer copolymerization: influence of the RAFT process on the copolymer composition

Reversible addition fragmentation chain transfer (RAFT) mediated and conventional copolymerizations at low monomer conversions have been carried out for the systems methyl methacrylate (MMA)-styrene, methyl acrylate (MA)-styrene and methyl methacrylate-butyl acrylate (BA). The polymer samples have been analyzed via ¹H-NMR spectroscopy to obtain the copolymer composition and the terminal model reactivity ratios. In the RAFT mediated copolymerizations, the polymer mole fraction of the monomer with the larger reactivity ratio is increased compared to the conventional copolymerization. Simulations have been carried out using the program package PREDICI^® to examine possible explanations for the experimental findings. The simulations demonstrate that the RAFT process itself may alter the macroradical populations and the copolymer composition by offering additional reaction pathways. Further, the rate coefficients for the initiation reaction and the pre-equilibrium play an important role in determining the copolymer composition. The rate coefficients governing the main equilibrium of the RAFT process have only a minor impact on the copolymer composition.     

Cationic copolymers of α,β‐poly‐(N‐2‐hydroxyethyl)‐DL‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy): synthesis and characterization

In the present study the derivatization of two water‐soluble synthetic polymers, α,β‐poly(N‐2‐hydroxyethyl)‐DL ‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy), with glycidyltrimethylammonium chloride (GTA) is described. This reaction permits the introduction of positive charges in the macromolecular chains of PHEA and PAHy in order to make easier the electrostatic interaction with DNA. Different parameters affect the reaction of derivatization, such as GTA concentration and reaction time. PHEA reacts partially and slowly with GTA; on the contrary the reaction of PAHy with GTA is more rapid and extensive. The derivatization of PHEA and PAHy with GTA is a convenient method to introduce positive groups in their chains and it permits the preparation of interpolyelectrolyte complexes with DNA. © 2000 Society of Chemical Industry     

Synthesis and monomer reactivity ratios of ethyl α‐acetoxyacrylate and acrylic acid copolymers

The synthesis of ethyl α‐acetoxyacrylate (EAA) and the study of its radical polymerization is described. We report the monomer reactivity ratios for copolymers of EAA and acrylic acid (AA) using three different methods: the Jaacks, the Macret and the Fineman–Ross methods. Copolymers were obtained by free radical polymerization initiated by 2,2′‐azobisisobutyronitrile in acetonitrile solutions and were analyzed by NMR and HPLC. The HPLC analysis was used to determine the molar fractions of EAA and AA in the copolymers. The reactivity ratios were estimated to be close to 1 for each monomer. Thus, copolymers of poly(acrylic acid) bearing some biodegradable units of EAA in the chain were subsequently prepared. The study of the hydrolysis of these units shows that only basic conditions were efficient to lead to hydrolyzed monomer units. Copyright © 2005 Society of Chemical Industry     

Inhibition of the thermal degradation of rigid poly(vinyl chloride) using poly(N‐[4‐(N′‐phenyl amino carbonyl)phenyl]maleimide)

Poly(N‐[4‐(N′‐phenyl amino carbonyl)phenyl]maleimide), poly(PhPM), has been investigated for the inhibition of the thermal degradation of rigid poly(vinyl chloride) (PVC) in air, at 180°C. Its stabilizing efficiency was evaluated by measuring the length of the induction period, the period during which no detectable amounts of hydrogen chloride gas could be observed, and also from the rate of dehydrochlorination as measured by continuous potentiometric determination, and the extent of discoloration of the degraded polymer. The results have proved the greater stabilizing efficiency of poly(PhPM) relative to that of the DBLC commercial stabilizer. This is well demonstrated by the longer induction period values and by the lower rates both of dehydrochlorination and discoloration of the polymer during degradation relative to those of the DBLC reference stabilizer. The greater stabilizing efficiency of the poly(PhPM) is most probably attributed not only to its possession of various centers of reactivity that can act as traps for radical species resulting during the degradation process, and replacement of labile chlorine atoms on PVC chains by relatively more thermally stable poly(PhPM) moieties, but also due to the ability of its fragmentation products to react with the evolved hydrogen chloride gas. A radical mechanism is suggested to account for the stabilizing action of this polymeric stabilizer. A synergistic effect is achieved when the poly(PhPM) was blended in various weight ratios with DBLC. This synergism attains its maximum when poly(PhPM) and DBLC are taken at 3 : 1 weight ratio. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

N‐Heterocyclic Carbene‐Mediated Organocatalytic Transfer of Tin onto Aldehydes: New Access to α‐Silyloxyalkylstannanes and γ‐Silyloxyallylstannanes

A new, highly efficient and mild N‐heterocyclic carbene (NHC)‐mediated organocatalytic procedure for the transfer of tin from tributyl(trimethylsilyl)stannane (Bu₃SnSiMe₃) onto aldehydes for the preparation of α‐silyloxyalkylstannanes and γ‐silyloxyallylstannanes has been developed.     

Enantioselective N‐Heterocyclic Carbene‐Catalyzed [3+3] Annulation of α,β‐Unsaturated Esters with Methyl Ketoimine

Herein, we disclose the N‐heterocyclic carbene (NHC)‐catalyzed [3+3] annulation of challenging esters with methyl ketoimines for the highly enantioselective synthesis of intriguing δ‐lactams featuring various substituent patterns. The annulation occurs under mild conditions and offers good tolerance, good yields and excellent enantioselectivities. The six‐membered heterocyclic products are valuable for the synthesis of bioactive molecules.

     

Homogeneous graft copolymerization of chitosan with butyl acrylate by γ‐irradiation via a 6‐O‐maleoyl‐N‐phthaloyl‐chitosan intermediate

The graft copolymerization of butyl acrylate (BA) onto chitosan was tried via a new protection‐graft‐deprotection procedure. About 6‐O‐maleoyl‐N‐phthaloyl‐chitosan was synthesized and characterized by Fourier transform infrared spectra analysis (FT‐IR) and ¹H‐NMR. Because the intermediate 6‐O‐maleoyl‐N‐phthaloyl‐chitosan was soluble in organic solvents, the graft copolymerization was carried out in a homogeneous system. Grafting was initiated by γ‐irradiation. The graft extent was dependent on the irradiation dose and the concentration of BA monomer, and copolymers with grafting above 100% were readily prepared. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 489–493, 2006     

The preparation of α‐bis and α,ω‐tetrakis aromatic oxazolyl‐ and carboxyl‐functionalized polymers using 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene in atom transfer radical polymerization reactions

The preparation of new compounds, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethanol and a new symmetrically disubstituted 1,1‐diphenylethylene derivative, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene, is described. 1,1‐Bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene was utilized as a dioxazolyl initiator precursor for the polymerization of styrene by atom transfer radical polymerization (ATRP) methods to produce α‐bis(oxazolyl) polystyrene. The kinetic study of the polymerization process indicated that the free radical polymerization reaction for the preparation of α‐bis(oxazolyl) polystyrene follows first‐order rate kinetics with respect to monomer consumption. α,ω‐Tetrakis(oxazolyl) polystyrene was prepared by a new, in situ, controlled/living, post‐ATRP chain‐end‐functionalization reaction which involves the direct addition of 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene to the ω‐terminus of the α‐bis(oxazolyl) polystyrene derivative, without the isolation and purification of the polymeric precursor. α‐Bis(carboxyl) and α,ω‐tetrakis(carboxyl) polystyrene derivatives were obtained by the quantitative chemical transformation of the oxazoline groups of the respective aromatic oxazolyl chain‐end‐functionalized polystyrene derivatives to the aromatic carboxyl groups. The organic precursor compounds, the dioxazolyl‐functionalized 1,1‐diphenylethylene derivative and the functionalized polymers were characterized using ¹H NMR and ¹³C NMR spectrometry and Fourier transform infrared spectroscopy, size‐exclusion and thin‐layer chromatography and non‐aqueous titration measurements. © 2014 Society of Chemical Industry     

Highly Enantioselective Phase‐Transfer Catalytic α‐Alkylation of α‐tert‐Butoxycarbonyllactams: Construction of β‐Quaternary Chiral Pyrrolidine and Piperidine Systems

A new enantioselective α‐alkylation of α‐tert‐butoxycarbonyllactams for the construction of β‐quaternary chiral pyrrolidine and piperidine core systems is reported. α‐Alkylations of N‐methyl‐α‐tert‐butoxycarbonylbutyrolactam and N‐diphenylmethyl‐α‐tert‐butoxycarbonylvalerolactam under phase‐transfer catalytic conditions (solid potassium hydroxide, toluene, −40 °C) in the presence of (S,S)‐3,4,5‐trifluorophenyl‐3,3′,5,5′‐tetrahydro‐2,6‐bis(3,4,5‐trifluorophenyl)‐4,4′‐spirobi[4H‐dinaphth[2,1‐c:1′,2′‐e]azepinium] bromide [(S,S)‐NAS Br] (5 mol%) afforded the corresponding α‐alkyl‐α‐tert‐butoxycarbonyllactams in very high chemical (up to 99%) and optical yields (up to 98% ee). Our new catalytic systems provide attractive synthetic methods for pyrrolidine‐ and piperidine‐based alkaloids and chiral intermediates with β‐quaternary carbon centers.