共查询到19条相似文献,搜索用时 671 毫秒
1.
2.
3.
“北斗”导航卫星星座现已进入了卫星发射布网的高峰期。按计划,到2020年,“北斗”将与美国“全球定位系统”(GPS)一样,成为一个向全球提供服务的卫星导航系统。数十年来,我国一直致力于研制自主的卫星导航系统。 相似文献
4.
随着北斗卫星导航系统(BDS)的发展与完善,基于BDS的时间传递应用需求越来越迫切。简要介绍了为开展北斗时间传递研究自研的多通道多频GPS/BDS时间传递接收机BM1308-52。接收机可同时接收GPS、BDS的码信息和载波相位信息,输出GPS、BDS的CGGTTS标准共视文件和Rinex观测文件,观测时间、处理方法及数据输出格式符合国际规范。最后,利用实测数据测试了BM1308-52的性能,测试结果表明,GPS单向时间比对和零基线共视比对不确定度优于2ns,BD单向时间比对不确定度优于3ns,与国际水平相当。BM1308-52的系统稳定可靠,观测精度高,可以更好地为时间频率传递服务。 相似文献
5.
《宇航计测技术》2016,(3)
随着北斗卫星导航系统(BDS)的发展与完善,基于BDS的时间传递应用需求越来越迫切。简要介绍了为开展北斗时间传递研究自研的多通道多频GPS/BDS时间传递接收机BM1308-52。接收机可同时接收GPS、BDS的码信息和载波相位信息,输出GPS、BDS的CGGTTS标准共视文件和Rinex观测文件,观测时间、处理方法及数据输出格式符合国际规范。最后,利用实测数据测试了BM1308-52的性能,测试结果表明,GPS单向时间比对和零基线共视比对不确定度优于2ns,BD单向时间比对不确定度优于3ns,与国际水平相当。BM1308-52的系统稳定可靠,观测精度高,可以更好地为时间频率传递服务。 相似文献
6.
为提高GPS共视时间比对的性能,本文介绍了利用中科院国家授时中心(NTSC)和德国物理技术研究院(PTB)两个守时实验室的多台接收机,基于多接收机组合技术原理,构建了NTSC和PTB各自的多接收机组合系统,采用数据融合技术,计算得出两个多接收机系统的观测数据并进行了时间比对试验及性能分析。结果表明,多接收机组合不仅提高了GPS共视的可靠性和稳定性,且提高了时间比对链路的精度。多接收机链路共视时间比对结果的标准偏差STDEV为1.36ns,比单接收机链路时间比对结果的STDEV值平均提高了19.4%,日稳可达3.2×10-14。 相似文献
7.
8.
基于三频数据的北斗卫星导航系统DCB参数精度评估方法 总被引:2,自引:0,他引:2
差分码偏差(Differential Code Biases,DCB)参数作为导航电文中重要的一项,是影响用户PNT服务的主要误差源之一。北斗卫星导航系统(后文简称“北斗系统”)发射三个频点的导航信号,在导航电文中需要发播卫星的2个TGD(Timing Group Delay)参数。文章首先介绍了北斗系统卫星DCB参数最小二乘解算与形式误差评估;其次根据北斗系统三频特点,提出了不同频点组合计算垂直方向电离层电子总含量(VTEC)互差的DCB精度定量评估方法,并与IGS(International GNSS Service)提供的GPS卫星DCB精度进行比较;最后,详细分析了DCB参数精度对用户等效距离误差(UERE)计算和定位计算的影响,分别采用卫星出场标定DCB参数和经过解算DCB参数进行评估。实测数据分析结果表明,北斗系统卫星DCB参数解算形式误差与IGS解算GPS卫星DCB参数形式误差相当,但受卫星类型和解算测站的几何分布限制,北斗系统卫星DCB参数解算不确定度相比IGS略差,估计精度优于0.5ns,不同频率组合计算VTEC互差绝对值均值优于0.6TECU。相比采用卫星出场标定值,采用系统解算DCB参数后,双频用户三维位置误差改善13.80%~47.42%。 相似文献
9.
10.
11.
《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2023,71(5):2206-2224
The BeiDou navigation satellite system (BDS) comprises geostationary earth orbit (GEO) satellites as well as inclined geosynchronous orbit (IGSO) and medium earth orbit (MEO) satellites. Owing to their special orbital characteristics, GEO satellites require frequent orbital maneuvers to ensure that they operate in a specific orbital window. The availability of the entire system is affected during the maneuver period because service cannot be provided before the ephemeris is restored. In this study, based on the conventional dynamic orbit determination method for navigation satellites, multiple sets of instantaneous velocity pulses parameters which belong to one of pseudo-stochastic parameters were used to simulate the orbital maneuver process in the orbital maneuver arc and establish the observed and predicted orbits of the maneuvered and non-maneuvered satellites of BeiDou regional navigation satellite system (BDS-2) and BeiDou global navigation satellite system (BDS-3). Finally, the single point positioning (SPP) technology was used to verify the accuracy of the observed and predicted orbits. The orbit determination accuracy of maneuvered satellites can be greatly improved by using the orbit determination method proposed in this paper. The overlapping orbit determination accuracy of maneuvered GEO satellites of BDS-2 and BDS-3 can improve 2–3 orders of magnitude. Among them, the radial orbit determination accuracy of each maneuvered satellite is basically better than 1 m. simultaneously, the combined orbit determination of the maneuvered and non-maneuvered satellites does not have a great impact on the orbit determination accuracy of the non-maneuvered satellites. Compared with the multi GNSS products (indicated by GBM) from the German Research Centre for Geosciences (GFZ), the impact of adding the maneuvered satellites on the orbit determination accuracy of BDS-2 satellites is less than 9 %. Furthermore, the orbital recovery time and the service availability period are significantly improved. When the node of the predicted orbit is traversed approximately 3 h after the maneuver, the accuracy of the predicted orbit of the maneuvered satellite can reach that of the observed orbit. The SPP results for the BDS reached a normal level when the node of the predicted orbit was 2 h after the maneuver. 相似文献
12.
《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2023,71(3):1657-1669
The Global Navigation Satellite System (GNSS) receivers equipped on the Haiyang-2D (HY-2D) satellite is capable of tracking the signals of both the third generation of BeiDou satellite navigation System (BDS-3) and the Global Positioning System (GPS), which make it feasible to assess the performance of real-time orbit determination (RTOD) for the HY-2D using onboard GNSS observations. In this study, the achievable accuracy and convergence time of RTOD for the HY-2D using onboard BDS-3 and GPS observations are analyzed. Benefiting from the binary-offset-carrier (BOC) modulation, the BDS-3 C1X signal includes less noise than the GPS C1C signal, which has the same signal frequency and chipping rate. The root mean squares (RMS) of the noises of C1X and C1C code measurements are 0.579 m and 1.636 m, respectively. Thanks to a ten-times higher chipping rate, the code measurements of BDS-3 C5P, GPS C1W and C2W are less noisy. The RMS of code noises of BDS-3 C5P, GPS C1W, and C2W are 0.044 m, 0.386 m, and 0.272 m, respectively. For the HY-2D orbit, the three-dimensional (3D) and radial accuracies can reach 31.8 cm and 7.5 cm with only BDS-3 observations, around 50 % better than the corresponding accuracies with GPS. Better performance of the BDS-3 in RTOD for the HY-2D is attributed to the high quality of its broadcast ephemeris. When random parameters are used to absorb ephemeris errors, substantial improvement is seen in the accuracy of HY-2D orbit with either BDS-3 or GPS. The 3D RMS of HY-2D orbit errors with BDS-3 and GPS are enhanced to 23.1 cm and 33.6 cm, and the RMS of the radial components are improved to 6.1 cm and 13.3 cm, respectively. The convergence time is 41.6 and 75.5 min for the RTOD with BDS-3 and GPS, while it is reduced to 39.2 and 27.4 min after the broadcast ephemeris errors are absorbed by random parameters. Overall, the achievable accuracy of RTOD with BDS-3 reaches decimeter level, which is even better than that with GPS, making real-time navigation using onboard BDS-3 observations a feasible choice for future remote sensing missions. 相似文献
13.
Xinyun Cao Fei Shen Shoujian Zhang Jiancheng Li 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2021,67(4):1303-1316
To realize the smooth transition from regional BeiDou Navigation Satellite System (BDS-2) to the global one (BDS-3), the integration of BDS-2 and BDS-3 is important for providing continuous, stable and reliable positioning, navigation and timing (PNT) services for global users. This work used 154 globally distributed multi-GNSS (Global Navigation Satellite System) experiment stations spanning 30 days to analyze the satellite availability and positioning performance of uncombined precise point positioning (UC-PPP) under current BDS-2 and BDS-3 constellations. We focused on three issues: the influence of BDS-3 receiver tracking abilities, the positioning performance among different areas, and the benefit of multi-frequency observations. The results show that the elliptical zone caused by poor BDS-2 satellite visibility is disappeared when the evenly distributed BDS-3 medium earth orbit satellites are introduced. When BDS-3 are integrated with BDS-2, the area with the Position Dilution of Precision (PDOP) less than 2 can be expanded to 75° S-75° N and 30° E-150° W. The positioning performance of BDS-3 and BDS-2/BDS-3 UC-PPP are seriously affected by the receiver tracking abilities of BDS-3 signals. When the maximum pseudo-random noise sequences (PRNs) of BDS-3 satellites tracked by stations are within 30 or 37, the positioning accuracy of static UC-PPP can be improved by 22.94% or 8.27% due to the integration of BDS-2 and BDS-3. Besides, the most improvement of BDS-2 and BDS-3 integration is achieved in Asia-Pacific regions, especially for the kinematic UC-PPP or the poor receiver tracking abilities of BDS-3. Similar to the multi-frequency BDS-2 UC-PPP, the benefit of multi-frequency signals for BDS-3 or BDS-2/BDS-3 UC-PPP is also non-vital. The three-dimensional positioning accuracy of BDS-2/BDS-3 multi-frequency UC-PPP in static mode and kinematic mode are 2.24 cm and 5.39 cm, while the corresponding convergence time are 49.62 min and 73.80 min, respectively. Compared with BDS-2, both the positioning accuracy and the convergence time of BDS-2/BDS-3 joint UC-PPP are improved by approximately over 50%, which indicates that BDS-3 has a great potential to provide high-quality PNT services as other global navigation satellite systems. 相似文献
14.
Rui Zhang Rui Tu Pengfei Zhang Lihong Fan Junqiang Han Xiaochun Lu 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2021,67(12):4011-4024
The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations. 相似文献
15.
《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2020,65(10):2348-2359
On December 27, 2018, the Beidou-3 System (BDS-3) has completed the deployment of 18 Medium Earth Orbit (MEO) satellites combined as a space constellation. In addition to the augmentation information for the new system signals B1C and B2a, the BDS-3 is compatible with the three augmentation information broadcast by the BDS-2 system for B1I and B3I signals: equivalent clock error correction, User Differential Ranging Error (UDRE) and Grid Ionosphere Vertical Error (GIVE). In this paper, the observation data of Beidou monitoring network are used to analyze the pseudo-range observation quality of the smooth transition signals B1I and B3I of BDS-2 and BDS-3. At the same time, the relationship between the equivalent clock error correction and the prediction error of the satellite clock is analyzed by using the Two-Way Satellite Time and Frequency Transfer (TWSTFT) data. The results show that the correlation between the equivalent clock error correction and the monitored clock error by using the TWSTFT data is greater than 60%. We calculate the UDRE by using the equivalent clock error correction. The results show that the satellite equivalent clock error correction can improve the accuracy of User Equivalent Range Error (UERE) by about 50%. This paper also compares the positioning accuracy of the BDS-2 satellites with the BDS-2 satellites combined BDS-3 satellites. The results show that the three-dimensional positioning accuracy is improved by about 30% after the BDS-3 satellites are added. 相似文献
16.
Nandakumaran Nadarajah Peter J.G. Teunissen Noor Raziq 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2014
The advent of modernized and new global navigation satellite systems (GNSS) has enhanced the availability of satellite based positioning, navigation, and timing (PNT) solutions. Specifically, it increases redundancy and yields operational back-up or independence in case of failure or unavailability of one system. Among existing GNSS, the Chinese BeiDou system (BDS) is being developed and will consist of geostationary (GEO) satellites, inclined geosynchronous orbit (IGSO) satellites, and medium-Earth-orbit (MEO) satellites. In this contribution, a BeiDou–GPS robustness analysis is carried out for instantaneous, unaided attitude determination. 相似文献
17.
《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2023,71(1):375-389
The FY3C and FY3D satellites were equipped with global navigation satellite occultation detector (GNOS) receivers that received both GPS and BDS-2 signals. For further improving precise orbit determination (POD) precisions, we estimated receiver GPS and BDS signal phase center variations (PCV) models with 2° and 5° resolutions and set the different weights for GPS and BDS-2 observations in the combined POD. The BDS-based POD precision using BDS-2 satellite antenna phase center offset (PCO) values from the China Satellite Navigation Office (CSNO) are not as accurate as those obtained from the International GNSS Service (IGS) Multi-GNSS experiments project (MGEX). The estimated receiver GPS and BDS PCV models with 2° and 5° resolutions were estimated from the GPS phase residuals of GPS-based POD and BDS phase residuals of combined POD, respectively. In most cases, the POD precisions using the estimated PCVs with 2° resolution are superior to those with 5° resolution. The precisions of the BDS-based POD and combined POD were both improved by introducing the receiver BDS PCV models. The weighting for GPS and BDS-2 observations can further improve the precision of the combined POD. The tested results of selected weights are better than those with equal weight in the combined POD. The experiment results show that orbital precisions of FY3C are worse than those of FY3D. 相似文献
18.
多通道GPS共视法时频传递接收机的研制 总被引:1,自引:0,他引:1
GPS共视法是国际上流行的远距离时间频率传递技术,核心是共视法接收机。我们成功研制了多通道GPS共视法时频传递接收机系统,硬件部分主要由自主研制的高精度时间间隔计数器和Motorola生产的VPONCORE GPS引擎组成,软件符合时间频率咨询委员会(CCTF)发布的GPS共视法数据处理软件标准化指南的要求,与单通道GPS定时接收机相比,界面更友好,操作更方便,具有很强的分析处理数据功能。经测试证明多通道GPS接收机零基线共钟共视时间比对的不确定度小于4 ns(仰角40°),与国外报道基本相同。 相似文献
19.
Sandra Verhagen Peter J.G. Teunissen 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2014
The evolving BeiDou Navigation Satellite System constellation brings new opportunities for high-precision applications. In this contribution the focus will be on one such application, namely precise and instantaneous relative navigation of a formation of LEO satellites. The aim is to assess the ambiguity resolution performance with the future GPS and BeiDou constellations depending on system choice (GPS, BeiDou, or GPS+BeiDou), single- or dual-frequency observations, receiver noise, and uncertainties in ionosphere modelling. In addition, for the GPS+BeiDou constellation it will be shown how the growing BeiDou constellation in the years to come can already bring an important performance improvement compared to the GPS-only case. The performance will be assessed based on the percentage of time that the required precision can be obtained with a partial ambiguity resolution strategy. 相似文献