直流磁控溅射中氩气压力对WSi／GaAs系统的影响

以ＷＳｉ复合材料作为靶源，采用直流磁控溅射工艺成膜，在不同氩气（载能粒子）压力条件下，８００℃、１７ｍｉｎ退火前后ＷＳｉ／ＧａＡｓ系统的性能。包括用显微显像观察不同氩气压力下淀积膜退火前后表面变化；ＳＥＭ分析系统断面、ＡＥＳ分析膜层与ＧａＡｓ衬底的界面情况；并通过肖特基二极管Ｉ－Ｖ特性的测量研究其整流特性。实验结果表明，在１．３－－１．６ｐａ氩气压力下淀积的ＷＳｉ膜层与ＧａＡｓ衬底所构成的系统具有     

P埋层技术研究

介绍了在Ｓｉ￣＋注入的ｎ－ＧａＡｓ沟道层下面用Ｂｅ￣＋或Ｍｇ￣＋注入以形成ｐ埋层。采用此方法做出了阈值电压０～０．２Ｖ，跨导大于１００ｍＳ／ｍｍ的Ｅ型ＧａＡｓＭＥＳＦＥＴ，也做出了夹断电压－０．４～－０．６Ｖ、跨导大于１００ｍＳ／ｍｍ的低阈值Ｄ型ＧａＡｓＭＥＳＦＥＴ。     

2英寸GaAs快速热退火技术研究

为配合２０００门ＧａＡｓ超高速门阵列及ＧａＡｓ超高速分频器等２英寸ＧａＡｓ工艺技术研究，开展了２英寸ＧａＡｓ快速热退火技术研究。做出了阈值电压为０～０．２Ｖ，跨导大于１００ｍＳ／ｍｍ的Ｅ型ＧａＡｓＭＥＳＦＥＴ和夹断电压为－０．４～－０．６Ｖ，跨导大于１００ｍＳ／ｍｍ的低阈值Ｄ型ＧａＡｓＭＥＳＦＥＴ。     

2英寸GaAs快速热退火技术研究

为配合２０００门ＧａＡｓ超高速门列及ＧａＡｓ超高速分频器等２英寸ＧａＡｓ工艺技术研究，开展了２英寸ＧａＡｓ快速热退火技术研究，做出了阈值电压为０～０．２Ｖ，跨导大于１００ｍＳ／ｍｍ的Ｅ型ＧａＡｓＭＥＳＦＥＴ和夹断电压为－０．４～－０．６Ｖ，跨导大于１００ｍＳ／ｍｍ的低阈值Ｄ型ＧａＡｓＭＥＳＦＥＴ。     

AlGaAs／InGaAs功率PHEMT用异质材料的计算机优化与器件实验结果

借助一新的工艺模拟与异质器件模型用ＣＡＤ软件──ＰＯＳＥＳ（Ｐｏｉｓｓｏｎ－ＳｃｈｒｏｅｄｉｎｇｅｒＥｑｕａｔｉｏｎＳｏｌｖｅｒ），对以ＡｌＧａＡｓ／ＩｎＧａＡｓ异质结为基础的多种功率ＰＨＥＭＴ异质层结构系统（传统、单层与双层平面掺杂）进行了模拟与比较，确定出优化的双平面掺杂ＡｌＧａＡｓ／ＩｎＧａＡｓ功率ＰＨＥＭＴ异质结构参数，并结合器件几何结构参数的设定进行器件直流与微波特性的计算，用于指导材料生长与器件制造。采用常规的ＨＥＭＴ工艺进行ＡｌＧａＡｓ／ＩｎＧａＡｓ功率ＰＨＥＭＴ的实验研制。对栅长０．８μｍ、总栅宽１．６ｍｍ单胞器件的初步测试结果为：ＩＤｓｓ２５０～４５０ｍＡ／ｍｍ；ｇｍ０２５０～３２０ｍＳ／ｍｍ；Ｖｐ－２．０－２．５Ｖ；ＢＶＤＳ５～１２Ｖ。７ＧＨｚ下可获得最大１．６２Ｗ（功率密度１．０Ｗ／ｍｍ）的功率输出；最大功率附加效率（ＰＡＥ）达４７％。     

大信号设计GaAs MESFET功率合成

利用ＧａＡｓＭＥＳＦＥＴ功率特性的线性化模型，求出ＧａＡｓＭＥＳＦＥＴ近似最佳功率负载阻抗，为利用谐波平衡法计算提供初值。然后，使用自行研制的谐波平衡分析软件包，进行ＧａＡｓＭＥＳＦＥＴ大信号模型参数的提取和非线性电路模拟计算。将两只总栅宽为９．６ｍｍ的ＧａＡｓＭＥＳＦＥＴ管芯，利用内匹配功率合成技术，在Ｃ波段（５．５～５．８ＧＨＺ）制成１ｄＢ压缩功率大于８Ｗ，典型功率增益９ｄＢ的ＧａＡｓＭＥＳＦＥＴ内匹配功率管。     

低阻W／WN难熔栅技术研究

探索了新型难熔栅Ｗ／ＷＮ工艺制备技术,通过ＳＥＭ,ＸＲＤ,ＳＩＭＳ,ＸＰＳ等手段对ＷＮ,ＷＮ／ＧａＡｓ特性作了分析。结果表明,溅射气压和Ｎ分压对Ｗ,ＷＮ薄膜特性有着显著影响,通过工艺条件的优化,制备的Ｗ／ＷＮ膜厚为３６０ｎｍ,方块分压为０．５１Ω。利用ＳｉＯ２作为退火包封层,７８０℃ １０ｓ快速退火后,Ｗ／ＷＮ能够保持好的稳定性,在此基础上制备了肖特基二极管和自对准的ＧａＡｓ ＭＥＳＦＥＴ。     

采用图像抑制有源HEMT混频器的60 GHz MMIC下变频器

采用图像抑制有源ＨＥＭＴ混频器的６０ＧＨｚＭＭＩＣ下变频器（ｌＥＥ１９９４ＭｉｃｒｏｗａｖｅａｎｄＭＭ．Ｗ。Ｍｏｎｏｌ．Ｃｌｒｃ．Ｓｙｍｐ．）报道，日本ＴａｍｉａＳａｉｔｏ等用ＡＩＧａＡｓ／ＧａＡｓＨＥＭＴ工艺技术设计、制作出一种Ｖ波段单片下变频器。...     

In_（0．53）Ga_（0．47）A_S表面钝化及降低界面态密度的方法

采用ＰＥＣＶＤ技术，以ＴＥＯＳ为源，对Ｉｎ０．５３Ｇａ０．４７Ａｓ材料进行表面钝化，研究了ＳｉＯ２／Ｉｎ０．５３Ｇａ０．４７Ａｓ的界面态，提出降低界面态密度的方法，使其降低到８．５×１０１０ｅＶ－１ｃｍ－２．     

In0.53Ga0.47As表面钝化及降低界面态密度的方法

采用ＰＥＣＶＤ技术，以ＴＥＯＳ为源，对Ｉｎ０．５３Ｇａ０．４７Ａｓ材料进行表面钝化，研究了ＳｉＯ２／Ｉｎ０．５３Ｇａ０．４７Ａｓ的界面态，提出降低界面态密度的方法，使其降低到８．５×１０＾１０ｅＶ＾－１ｃｍ＾－２。     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks     

Call for Papers—Feature Topic,Vol.12,No.7,2015

正Information Centric Networking Information-Centric Networking(ICN) is an emerging direction in Future Internet architecture research,gaining significant tractions among academia and industry.Aiming to replace the conventional host-to-host communication model by a data-centric model,ICN treats data content as the first     

JOURNAL OF ELECTRONICS(CHINA)

正~~     

NOTICE OF CHANGING JOURNAL OF ELECTRONICS （CHINA） TO MICROSYSTEMS ＆ NANOENGINEERING

正Journal of Electronics(China)(JE)was founded in 1984,sponsored by the Institute of Electronics,Chinese Academy of Sciences.JE is one of the first English academic journals in China in the field of Electronics and Information technology.The journal was published quarterly since it was launched in 1984 to 2003,then it is published bimonthly till now.During