Radiopaque iodinated ethers of poly(vinyl iodobenzyl ether)s: Synthesis and evaluation for endovascular embolization

Leachable‐free radiopaque iodinated polymers were designed as long‐lived embolization materials visible by X‐ray tomography. This is a definite improvement over liquid embolics incorporating either radiopaque inorganic particles or iodinated polymers having hydrolysable ester bonds. Grafting 4‐iodobenzyl or 2,3,5‐triiodobenzyl groups to poly(vinyl alcohol) (PVAL) yields iodobenzyl ethers of PVAL having iodine contents in the range 40–70 wt %. Their solubility in solvents accepted for medical devices (DMSO and NMP), viscosity of concentrated solutions, precipitation behavior, radiopacity, and stability with respect to sterilization and hydrolysis were assessed. The solvent NMP allows the preparation of concentrated solutions of suitable viscosity for their application as liquid embolics. Precipitation in water yields a cohesive mass of material that can plug vascular malformations. A rationale to the properties is given in terms of the Hansen contributions to the Hildebrand solubility parameters. Iodobenzyl ethers of PVA resist hydrolysis whereas their corresponding iodobenzoyl esters leach iodinated fragments. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41791.     

Antibacterial properties of polyaniline derivatives

This work presents a detailed study on the effect of various functional groups both at the ortho position of the aromatic ring and in the amino group of PANI on the antibacterial properties of polymers against gram-positive (Bacillus subtilis) and gram-negative (Pseudomonas aureofaciens) microorganisms. It was found that incorporation of methyl, methoxy, or pentyl groups into the ortho-position of PANI did not increase the antibacterial activity but in most cases causes a significant decrease in the antibacterial properties of functionally substituted polyanilines. At the same time, PANI derivatives modified by incorporation of pentyl groups into the amino group were found to be more efficient antibacterial compounds against both gram-positive and gram-negative microorganisms than the original polymer. It was also found that N-substituted PANI derivatives manifest not only bactericidal but also bacteriostatic properties toward the test microorganisms. Varying the nature and position of the substituent allowed us to conclude that the synthesis of various N-substituted PANI derivatives with a high degree of doping is the most promising approach to PANI modification for application in bacterial growth inhibition.     

Characterization of the thermoresponsive shape‐memory effect in poly(ether ether ketone) (PEEK)

We conducted a systematic experimental investigation to characterize the shape‐memory effect in a commercial poly(ether ether ketone) (PEEK), which is a very important high‐temperature polymers at present. The focus was on the influence of the programming conditions and heating temperature for recovery on the shape‐recovery ratio (R_r). We concluded that PEEK is not only an important engineering polymer as it is traditionally known but is also an excellent high‐temperature shape‐memory polymer. For a residual programming strain of 30%, the maximum R_r was about 90%. It was revealed that it was practically feasible to program PEEK at room temperature and to lower the recovery temperature from its melting temperature range to around its glass‐transition temperature. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39844.     

Effect of interfacial area on heterogeneous free radical grafting of vinyl monomers in supercritical carbon dioxide: Grafting of acrylic acid on poly(vinylidenefluoride) nanoparticles

The role of the polymer interfacial area on free radical grafting of acrylic acid (AA) onto poly(vinylidenefluoride) (PVDF) was studied at 65°C using supercritical carbon dioxide (scCO₂) as a solvent and swelling agent, benzoylperoxide (BPO) as chemical initiator and PVDF nanoparticles as polymer matrix. Under adopted conditions PVDF particles do not melt neither dissolve in the reaction medium and FTIR analyses performed on carefully washed nanoparticles confirmed the achievement of high grafting levels. The mass fraction of grafted AA increased with the grafting time and the BPO concentration while it decreased when the density of the fluid phase was enhanced. Collected results suggest that the grafting level obtained by free radical grafting of vinyl monomers onto solid polymer in scCO₂ can be significantly enhanced by increasing the interfacial area of the matrix. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41541.     

Synthesis of novel antibacterial monomers (UDMQA) and their potential application in dental resin

To prepare antibacterial dental resin, a series of novel urethane dimethacrylates quaternary ammonium methacrylate monomers (UDMQAs) with different substituted alkyl chain length were synthesized, and their structures were confirmed by FTIR and ¹H‐NMR spectra. The obtained UDMQAs were used to replace 2,2‐Bis[4‐(2‐hydroxy‐3‐methacryloyloxypropyl)‐phenyl]propane (Bis‐GMA) totally as base monomers of dental resin and mixed with Tri‐ethyleneglycol dimethacrylate (TEGDMA) at the mass ratio of 50/50. The properties of these prepared resins like antibacterial activity, double bond conversion (DC), polymerization shrinkage, flexural strength (FS), and modulus (FM), water sorption and sol fraction were investigated. The most commonly used dental resin Bis‐GMA/TEGDMA (50wt/50wt) was chosen as a reference. The results showed that UDMQAs could endow dental resin with antibacterial activity. Compared with Bis‐GMA‐based dental resin, UDMQAs‐based resin had the same or higher DC, lower polymerization shrinkage, lower flexural strength and modulus, and higher water sorption and sol fraction. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Cotton‐fabric‐grafted poly(N‐isopropyl acrylamide) initiated by ammonium peroxydisulfate

In this article, we report that thermoresponsive poly(N‐isopropyl acrylamide) (PNIPAAm) was successfully grafted onto a cotton fabric (CF) surface by free‐radical solution grafting polymerization; we obtained a thermoresponsive CF‐grafted PNIPAAm. This reaction system only contained four constituents: the monomer, solvent, initiator, and CFs. Ammonium peroxydisulfate was chosen as the initiator, and water was chosen as the solvent. A series of initiator concentrations and grafting polymerization temperatures were used in the experiments, and their effects on the grafting ratio (G) were also studied. Also, the effects of the G of CF‐g‐PNIPAAm on their corresponding thermoresponses was studied further. The structure of CF‐g‐PNIPAAm was characterized by Fourier transform infrared spectroscopy–attenuated total reflectance analysis and scanning electron microscopy analysis. The G of CF‐g‐PNIPAAm was measured by a gravimetric method. The thermoresponse of CF‐g‐PNIPAAm was characterized by modulated differential scanning calorimetry, water contact angle measurements, and wetting time measurements. The experiments manifested the following results: (1) the initiator concentration and grafting polymerization temperature both influenced G, (2) the grafted PNIPAAm covered the CF surface, (3) the CF‐g‐PNIPAAm showed thermoresponsive hydrophilicity/hydrophobicity, and (4) a relationship existed between the thermoresponse of CF‐g‐PNIPAAm and the corresponding G. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41193.     

Reactive red 120 and NI(II) derived poly(2‐hydroxyethyl methacrylate) nanoparticles for urease adsorption

Non‐porous poly(2‐hydroxyethyl methacrylate) [p(HEMA)] nanoparticles were prepared by surfactant free emulsion polymerization. The p(HEMA) nanoparticles was about 200 nm diameter, spherical form, and non‐porous. Reactive Red 120 (RR 120) was covalently attached to the p(HEMA) nanoparticles and Ni(II) ions were incorporated to attach dye molecules. Urease was immobilized onto RR120‐Ni(II) attached p(HEMA) nanoparticles via adsorption. The maximum urease adsorption capacity of RR120‐Ni(II) attached p(HEMA) nanoparticles was 480.01 mg g^?1 nanoparticles at pH 7.0 in phosphate buffer. It was observed that urease could be repeatedly adsorbed and desorbed without significant loss in adsorption amount. K_m values were 21.50 and 34.06 mM for the free and adsorbed enzyme. The V_max values were 4 U for the free enzyme and 3.3 U for the adsorbed enzyme. The optimum pH was 25 mM pH 7 phosphate buffer for free and adsorbed enzyme. The optimum temperature was determined at 35°C and 55°C for the free and adsorbed enzyme, respectively. These findings show considerable promise for this material as an adsorption matrix in biotechnological applications. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39757.     

Synergistic effects of surface grafting with heparin and addition of poly(d,l-lactide) microparticles on properties of poly(l-lactide) single crystals scaffolds

Mixtures of heparin grafted poly(l- lactide) single crystals (Hep-PLLA_sc) and poly(d ,l- lactide) (PDLLA) microparticles are used for assembling hydrophilic and cytocompatible three-dimensional tissue engineering scaffolds simply by compression molding/salt leaching technique. PLLA is grafted with heparin to promote its surface cytocompatability, while PDLLA is added to reinforce the scaffolds. PLLA_sc are aminolyzed with tetraethylenepentamine (13-atom spacer) to generate sterically accessible amino groups at the surface allowing the covalent attachment of heparin by aqueous carbodiimide chemistry. Morphological and compressive strength studies manifest the integrity and compactness of scaffolds. Toluidine blue assay assures the consistency of heparin distribution throughout the scaffolds, which is in contrary to the conventional grafting reactions by immersing the scaffold in heparin solution. The scaffolds applicability is examined by fibroblast cells seeding experiments. Contrary to pristine scaffolds, Hep-PLLA_sc scaffolds display a hydrophilic and cytocompatible interface for cell adhesion, spreading, growth, and migration. Therefore, combining presurface grafted PLLA_sc with PDLLA microparticles could offer durable scaffolds exhibiting bioactive interface and controllable spatial distribution of the grafted biomacromolecules. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47797.     

Mechanical properties and stem cell adhesion of injection‐molded poly(ether ether ketone) and hydroxyapatite nanocomposites

A nanocomposite of poly(ether ether ketone) (PEEK) with 10 wt % hydroxyapatite (HA) was produced by extrusion and injection molding. Afterward, the samples were thermally treated. Thermal and short‐ and long‐term mechanical characterizations of the samples were made. The adhesion of human adipose stem cells (h‐ASCs) on the samples was also monitored. The ultimate tensile strength (UTS) and elastic modulus values of the nanocomposite were found to be much higher than those of trabecular bone. The impact strength of PEEK was not modified by HA; this suggested that there was no formation of large agglomerates of nanoparticles that could concentrate the stresses. With regard to fatigue life, both the thermally and nonthermally treated nanocomposites did not fail after 10⁶ cycles when maximum stresses of 30 and 50% of the UTS were applied, but they failed when the maximum applied stress was 75% of the UTS and behaved as cortical bone. After 5 days of culturing, the h‐ASCs had a higher proliferation in the nanocomposite than in pure PEEK because of the presence of HA. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41748.     

Polyester functionalization for mycobacterial capture

Tuberculosis (TB) is one of the deadliest diseases known to man and ranks among the top ten global causes of fatalities. Children often develop a paucibacillary form of this disease which makes diagnosis arduous even with the aid of sophisticated techniques. In these cases, the concentration of bacteria in their sputum falls below the lowest limit of detection for sputum smear microscopy, the technique predominantly used in developing countries. In this study we aim to test the hypothesis that modifying a polymer, often used in buccal swabs, could assist in creating a capturing and concentrating oral swab for Mycobacterium tuberculosis (Mtb), the pathogenic bacterial species responsible for TB. Such a device will assist in meeting the detection limit and allow for rapid detection of the disease. The polymer used was a micro fibrous form of poly(ethylene terephthalate) (PET) which was surface functionalized with Concanavalin A (Con A), a lectin based adhesin with an affinity for the mannose groups on the Mtb cell wall. The functionalization was mediated with glutaraldehyde as bioconjugate molecule and found to produce a surface uniformly covered with Con A. Affinity studies between the modified fibers and the Mycobacterium bovis bacillus Calmette-Guérin (BCG), as Mtb mimic, were conducted to evaluate the capturing abilities of the substrate. The results indicate that the fibers avidly captured BCG and that the fibrous matrix aided in its function. Dilution studies showed successful capturing of the bacterial species at concentrations characteristic of paucibacillary cases. In this study a commercial polymeric material was successfully surface modified with a biological entity to create a substrate to which Mtb could adhere and accordingly be captured.     

Thermosensitive polymeric micelles based on the triblock copolymer poly(d,l‐lactide)‐b‐poly(N‐isopropyl acrylamide)‐b‐poly(d,l‐lactide) for controllable drug delivery

A thermosensitive amphiphilic triblock copolymer, poly(d,l ‐lactide) (PLA)‐b‐poly(N‐isopropyl acrylamide) (PNIPAAM)‐b‐PLA, was synthesized by the ring‐opening polymerization of d,l ‐lactide; the reaction was initiated from a dihydroxy‐terminated poly(N‐isopropyl acrylamide) homopolymer (HO‐PNIPAAM‐OH) created by radical polymerization. The molecular structure, thermosensitive characteristics, and micellization behavior of the obtained triblock copolymer were characterized with Fourier transform infrared spectroscopy, ¹H‐NMR, gel permeation chromatography, dynamic light scattering, and transmission electron microscopy. The obtained results indicate that the composition of PLA‐b‐PNIPAAM‐b‐PLA was in good agreement with what was preconceived. This copolymer could self‐assemble into spherical core–shell micelles (ca. 75–80 nm) in aqueous solution and exhibited a phase‐transition temperature around 26 °C. Furthermore, the drug‐delivery properties of the PLA‐b‐PNIPAAM‐b‐PLA micelles were investigated. The drug‐release test indicated that the synthesized PLA‐b‐PNIPAAM‐b‐PLA micelles could be used as nanocarriers of the anticancer drug adriamycin (ADR) to effectively control the release of the drug. The drug‐delivery properties of PLA‐b‐PNIPAAM‐b‐PLA showed obvious thermosensitive characteristics, and the release time of ADR could be extended to 50 h. This represents a significant improvement from previous PNIPAAM‐based drug‐delivery systems. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45304.     

Crystallinity,reversibility, and injectability of physically crosslinked poly(vinyl alcohol) and poly(ethylene glycol) hydrogels

Crystallite regions within a hydrogel network contribute to its mechanical strength, which is crucial for use in load-bearing applications. However, high amounts of crystallinity can negatively impact the ability for hydrogels to be injected, an attractive property that could replace the need for highly invasive surgical procedures. The reversibility of crystallinity and its lasting impact on the injectability of poly(vinyl alcohol) and poly(ethylene glycol) hydrogels was evaluated in this paper. The relative percent crystallinity in hydrogels was evaluated after storage and autoclaving in syringes in weekly intervals using X-ray diffraction. Results indicate that crystallinity increased over time and significantly decreased after autoclaving for all samples, where postautoclaved samples contained comparable crystallinity percentages to freshly made gels (p > 0.05). Injectability was evaluated using calculated viscosity. Aged samples were able to be injected after autoclaving, yet there was no determination established between viscosity and storage times based on the data. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48706.     

Versatile poly(maltose) micro/nanoparticles with tunable surface functionality as a biomaterial

Maltose, a natural disaccharide, was crosslinked with divinyl sulfone to prepare poly(maltose) (p(MAL)) micro/nanoparticles via one step microemulsion system with ≥90% ± 5% yield in a size rage of 0.5–100 μm for the first time. P(MAL) was modified (m-p(MAL)) with ethylenediamine (EDA), polyethyleneimine (PEI), and taurine (TA) to render additional functionalities, that is, amine and sulfate groups. The isoelectronic point of bare p(MAL) particles were calculated at pH 2.2 ± 0.5 and was changed to 1.3 ± 0.5, 4.3 ± 1.0, and 8.1 ± 0.7 for TA (p(MAL)/TA), EDA (p(MAL)/EDA), and PEI (p(MAL)/PEI) modification, respectively. Bare p(MAL) particles were found to be biocompatible up to 2 mg/ml with hemolysis and blood clotting tests, whereas the modified p(MAL) particles were found to be biocompatible at 1 mg/ml concentration. Additionally, it was found that TA- and PEI-modified p(MAL) particles induced blood clotting mechanisms. Sodium diclofenac as model drug was released at proportions of 8.7% ± 1.3%, 3.9% ± 0.2%, 8.8% ± 0.9%, and 31.6% ± 0.4% of the loaded drug in phosphate buffered saline solution from p(MAL), p(MAL)/TA, p(MAL)/EDA, and p(MAL)/PEI, respectively. The inhibition of antimicrobial activity of p(MAL)/PEI particles at 20 mg/ml concentration for Escherichia coli and Staphylococcus aureus strain was determined as 99.86% ± 0.3% and 99.79% ± 0.25%, respectively.     

Synthesis and characterization of a surface imprinting silica gel polymer functionalized with phosphonic acid groups for selective adsorption of Fe(III) from aqueous solution

A Fe(III) ion‐imprinted silica gel polymer functionalized with phosphonic acid groups (IIP‐PA/SiO₂) was prepared with surface imprinting technique by using Fe(III) ion as template ion, grafted silica gel as support, and vinylphosphonic acid as functional monomer. The polymer was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, Brunauer–Emmett–Teller, and thermogravimetric analysis. The synthesized imprinted silica gel polymer was used as a sorbent for Fe(III) adsorption. The adsorption properties, such as the effect of solution pH, adsorption kinetic, adsorption isotherm, adsorption selectivity as well as the regeneration of sorbent were studied. The results showd that the prepared sorbent (IIP‐PA/SiO₂) had a short adsorption equilibrium time (12 min) and high adsorption capacity (29.92 mg g^?1) for Fe(III) at the optimal pH of 2.0. The selectivity coefficients of the sorbent for Fe(III) in presence of Cr(III), M_n (II), and Zn(II) were 51.76, 27.86, and 207. 76, respectively. Moreover, the adsorption capacity of the prepared sorbent did not decrease significantly after six repeated use. Thus, the prepared ion‐imprinted silica gel polymer was a promising candidate sorbent for the selective adsorption of Fe(III) from aqueous solutions. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45165.     

Synthesis,characterization, and drug‐release behavior of amphiphilic quaternary ammonium chitosan derivatives

A new type of amphiphilic quaternary ammonium chitosan derivative, 2‐N‐carboxymethyl‐6‐O‐diethylaminoethyl chitosan (DEAE–CMC), was synthesized through a two‐step Schiff base reaction process and applied to drug delivery. In the first step, benzaldehyde was used as a protective agent for the incorporation of diethylaminoethyl groups to form the intermediate (6‐O‐diethylaminoethyl chitosan). On the other hand, NaBH₄ was used as a reducing agent to reduce the Schiff base, which was generated by glyoxylic acid, for the further incorporation of carboxymethyl groups to produce DEAE–CMC. The structure, thermal properties, surface morphology, and diameter distribution of the resulting chitosan graft copolymers were characterized by Fourier transform infrared spectroscopy, ¹H‐NMR, thermogravimetric analysis, differential scanning calorimetry, X‐ray powder diffraction, scanning electron microscopy, and laser particle size analysis. Benefiting from the amphiphilic structure, DEAE–CMC was able to be formed into microspheres in aqueous solution with an average diameter of 4.52 ± 1.21 μm. An in vitro evaluation of these microspheres demonstrated their efficient controlled release behavior of a drug. The accumulated release ratio of vitamin B₁₂ loaded DEAE–CMC microspheres were up to 93%, and the duration was up to 15 h. The grafted polymers of DEAE–CMC were found to be blood‐compatible, and no cytotoxic effect was shown in human SiHa cells in an MTT [3‐(4, 5‐dimethyl‐thiazol‐2‐yl)‐2, 5‐diphenyltetrazolium bromide] cytotoxicity assay. These results indicate that the DEAE–CMC microspheres could be used as safe, promising drug‐delivery systems. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39890.     

Poly(aryl ether ketone)s with bromomethyl groups: Synthesis and quaternary amination

A series of bromomethylated poly(arylene ether ketone)s (PAEKs) with different contents of bromine tethered to the benzyl groups were successfully synthesized and characterized in this work. For this purpose, poly(arylene ether ketone) with 3,3′,5,5′‐tetramethyl‐4,4′‐dihydroxybipheny moiety (PAEK‐TM) was prepared by the aromatic nucleophilic polycondensation, and then the PAEK‐TM has benzylic methyl groups that were converted to bromomethyl groups by a radical reaction using N‐bromosuccinimide. Then, the bromomethylbenzyl groups in the membrane was converted to quaternary ammonium moieties in TMPAEK‐NOH. ¹H‐NMR measurements were used to characterize and confirm the structures of the resulting PAEK‐x‐BrTM and TMPAEK‐NBr derivatives (x refers to the molar percentage of bromine introduced per repeating units). TGA analysis showed that PAEK‐x‐BrTM exhibited a very low‐decomposition temperature at about 200°C corresponding to the C Br bond cleavage. The hydroxide conductivity of TMPAEK‐NOH membrane was 8 mS cm⁻¹ at room temperature, while the water uptake of TMPAEK‐NOH membrane was 22.3% at 20°C and 32.6% at 60°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Facile UV‐curing technique to establish a 3D‐grafted poly(ethylene glycol) layer on an epoxy resin base for underwater applications

Construction of a highly hydrophilic polymer surface with excellent long‐term stability underwater is a great challenge. In this paper, a facile ultraviolet (UV) curing technique was employed to realize the three‐dimensional (3D) grafting of poly(ethylene glycol) diacrylate (PEGDA, molecular weight: 400, 600, and 1000 g/mol) on a bisphenol A epoxy acrylate (BEA) sheet. The cross section morphology, surface chemical composition, and wettability of the sheets were monitored using an optical microscope, an attenuated total reflectance Fourier transform infrared spectroscope, and a water contact angle analyzer, respectively. The PEGDA‐grafted epoxy sheets displayed a highly hydrophilic surface and meanwhile possessed excellent stability underwater, despite the molecular weight of PEGDA. In contrast, the PEGDA/BEA blend sheets are easily damaged underwater, due to strong swelling. In addition, the PEGDA1000‐grafted BEA sheet demonstrated good antifouling performance in a natural marine environment. Nevertheless, its long‐term antifouling is not satisfactory, being presumably due to hydrolysis or biodegradation of the PEG segments. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43972.     

Synergistic effects of surface aminolysis and hydrolysis on improving fibroblast cell colonization within poly(L-lactide) scaffolds

This work presents a method for overcoming the low internal cell colonization within the tissue engineering scaffolds. 3D scaffolds were fabricated by the compression molding/salt leaching technique from mixtures of aminolyzed and hydrolyzed poly(L-lactide) single crystals (PLLAsc) with poly(D,L-lactide) (PDLLA) microparticles. Modified PLLAsc were used to guarantee the surface hydrophilicity, while PDLLA microparticles were used to reinforce the scaffolds. Mechanical properties, morphology, water uptake and fibroblast cell response of the scaffolds were investigated in comparison with scaffolds from only pristine, hydrolyzed, or aminolyzed PLLAsc. Results showed that the scaffolds exhibited proper morphology and hydrophilicity with an enhanced strength. Water uptake by scaffolds from modified PLLAsc was 1.9 times that from pristine PLLAsc. The scaffolds' compressive moduli increased 2.5 times by using of PDLLA (30 wt%). After cell seeding for a week, the number of cells founded on aminolyzed/hydrolyzed PLLAsc scaffolds were 4.28, 2.14, and 1.36 times that founded for pristine, aminolyzed and hydrolyzed PLLAsc scaffolds, respectively. SEM studies showed that fibroblasts migrated and spread throughout the aminolyzed/hydrolyzed PLLAsc scaffolds better than other scaffolds. Hence, combining both aminolyzed and hydrolyzed PLLAsc with PDLLA could result in a mechanically stable scaffold with an enhanced cell colonization.     

Development and characterization of a poly (vinyl alcohol) and sodium alginate blend foam for wound dressing loaded with propolis and all-trans retinoic acid

Propolis is a complex mixture of phytochemicals, with antibacterial, anti-inflammatory, and healing properties. All-trans retinoic acid is implicated in wound healing by stimulating angiogenesis, cell recruitment, extracellular matrix deposition, and reepithelization. The incorporation of both agents to a polymeric wound dressing composed of poly (vinyl alcohol) and sodium alginate may result in improved healing allied to controlled release, fluid uptake, and wound protection. In the present work, we have physically characterized this wound dressing and analyzed its release kinetics. The anti-inflammatory capacity was assayed. SEM images showed a highly porous structure with a diverse morphology. FTIR spectra displayed a highly cross-linked structure with both polymers connected by hydrogen bonds and acetal bridges. The wound dressings were able to retain great volumes of PBS. Propolis and vitamin A releasing behavior were maintained for 6 h. The concentrations of the biologically active substances were capable of promoting anti-inflammatory action in an erythrocyte membrane stabilization model. The wound dressings obtained here showed adequate physical properties. The fabrication process did not affect the anti-inflammatory capacity. Further tests are needed to ensure the biocompatibility and to assess other biological activities of the therapeutic agents.     

Photoinduced grafting of vinyl benzyl trimethyl ammonium chloride on polyester nonwoven fabric with surfactant coating and its anion‐exchange properties

Vinyl benzyl trimethyl ammonium chloride (VBTAC) could be efficiently and stably grafted onto polyester fiber coated with a surfactant polyester (PET) by a photoirradiation‐induced graft polymerization with benzophenone as the photoinitiator without any cografting monomer required. The degree of VBTAC grafting could be controlled simply by the irradiation time and concentration of VBTAC in the monomer solution. The anion‐exchange capacity (AEC) of the PET‐g‐VBTAC fabrics increased with increasing degree of grafting up to 80 ± 5% and then leveled off. The maximum AEC of PET‐g‐VBTAC was 2.2 mequiv/g; this was similar to that of a commercial anion‐exchange resin (2.16 ± 0.04 mequiv/g) and much higher than those of nylon‐g‐VBTAC–2‐hydroxyethyl methacrylate fabrics (≤1.0 mequiv/g) prepared with a conventional cografting system. The grafted fabric was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy studies, and the sorption selectivity for anions and regeneration efficiency were estimated. The results suggest that the grafting system, in which VBTAC alone was grafted onto PET fiber coated with surfactant, was more practical and effective for the preparation of the VBTAC‐containing anion exchanger, and the resulting PET‐g‐VBTAC fabrics could be used as an effective anion exchanger. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41674.