Surface Engineering of g‐C3N4 by Stacked BiOBr Sheets Rich in Oxygen Vacancies for Boosting Photocatalytic Performance

BiOBr containing surface oxygen vacancies (OVs) was prepared by a simple solvothermal method and combined with graphitic carbon nitride (g‐C₃N₄) to construct a heterojunction for photocatalytic oxidation of nitric oxide (NO) and reduction of carbon dioxide (CO₂). The formation of the heterojunction enhanced the transfer and separation efficiency of photogenerated carriers. Furthermore, the surface OVs sufficiently exposed catalytically active sites, and enabled capture of photoexcited electrons at the surface of the catalyst. Internal recombination of photogenerated charges was also limited, which contributed to generation of more active oxygen for NO oxidation. Heterojunction and OVs worked together to form a spatial conductive network framework, which achieved 63 % NO removal, 96 % selectivity for carbonaceous products (that is, CO and CH₄). The stability of the catalyst was confirmed by cycling experiments and X‐ray diffraction and transmission electron microscopy after NO removal.     

Carbon Vacancies in a Melon Polymeric Matrix Promote Photocatalytic Carbon Dioxide Conversion

Photosynthetic conversion of CO₂ into fuel and chemicals is a promising but challenging technology. The bottleneck of this reaction lies in the activation of CO₂, owing to the chemical inertness of linear CO₂. Herein, we present a defect‐engineering methodology to construct CO₂ activation sites by implanting carbon vacancies (CVs) in the melon polymer (MP) matrix. Positron annihilation spectroscopy confirmed the location and density of the CVs in the MP skeleton. In situ diffuse reflectance infrared Fourier transform spectroscopy and a DFT study revealed that the CVs can function as active sites for CO₂ activation while stabilizing COOH* intermediates, thereby boosting the reaction kinetics. As a result, the modified MP‐TAP‐CVs displayed a 45‐fold improvement in CO₂‐to‐CO activity over the pristine MP. The apparent quantum efficiency of the MP‐TAP‐CVs was 4.8 % at 420 nm. This study sheds new light on the design of high‐efficiency polymer semiconductors for CO₂ conversion.     

Ni,Co基硒化物修饰g-C3N4光催化产氢研究

Developing novel and efficient catalysts is a significant way to break the bottleneck of low separation and transfer efficiency of charge carriers in pristine photocatalysts. Here, two fresh photocatalysts, g-C₃N₄@Ni₃Se₄ and g-C₃N₄@CoSe₂ hybrids, are first synthesized by anchoring Ni₃Se₄ and CoSe₂ nanoparticles on the surface of well-dispersed g-C₃N₄ nanosheets. The resulting materials show excellent performance for photocatalytic in situ hydrogen generation. Pristine g-C₃N₄ has poor photocatalytic hydrogen evolution activity (about 1.9 μmol·h^-1) because of the rapid recombination of electron-hole pairs. However, the hydrogen generation activity is well improved after growing Ni₃Se₄ and CoSe₂ on the surface of g-C₃N₄, owing to the unique effect of these selenides in accelerating the separation and migration of charge carriers. The hydrogen production activities of G-C₃N₄@Ni₃Se₄ and g-C₃N₄@CoSe₂ are about 16.4 μmol·h^-1 and 25.6 μmol·h^-1, which are 8-fold and 13-fold that of pristine g-C₃N₄, respectively. In detail, coupling Ni₃Se₄ and CoSe₂ with g-C₃N₄ greatly improves the light absorbance density and extends the light response region. The photoluminescence intensity of the photoexcited Eosin Y dye in the presence of g-C₃N₄@Ni₃Se₄ and g-C₃N₄@CoSe₂ is weaker than that in the presence of pure g-C₃N₄. On the other hand, the upper limit of the electron-transfer rate constants in the presence of g-C₃N₄@Ni₃Se₄ and g-C₃N₄@CoSe₂ is greater than that in the presence of pure g-C₃N₄. Among the g-C₃N₄@Ni₃Se₄@FTO, g-C₃N₄@CoSe₂@FTO, and g-C₃N₄@FTO electrodes, the g-C₃N₄@FTO electrode has the lowest photocurrent density and the highest electrochemical impedance, implying that the introduction of CoSe₂ and Ni₃Se₄ onto the surface of g-C₃N₄ enhances the separation and transfer efficiency of photogenerated charge carriers. In other words, the formation of two star metals selenide based on g-C₃N₄ can efficiently inhibit the recombination of photogenerated charge carriers and accelerate photocatalytic water splitting to generate H₂. Meanwhile, the right shift of the absorption band edge effectively reduces the transition threshold of the photoexcited electrons from the valence band to the conduction band. In addition, the more negative zeta potential for the g-C₃N₄@Ni₃Se₄ and g-C₃N₄@CoSe₂ catalysts as compared with that for pure g-C₃N₄ leads to a notable enhancement in the adsorption of protons by the sample surface. Moreover, the results of density functional theory calculations indicate that the hydrogen adsorption energy of the N sites in g-C₃N₄ is -0.22 eV; further, the hydrogen atoms are preferentially adsorbed at the bridge site of two selenium atoms to form a Se―H―Se bond, and the adsorption energy is 1.53 eV. In-depth characterization has been carried out by transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, ultraviolet-visible diffuse reflectance spectroscopy, transient photocurrent measurements, and Fourier transform infrared spectroscopy; the results of these experiments are in good agreement with one another.     

In-situ Construction of Sulfur-doped g-C3N4/defective g-C3N4 Iso-type Step-scheme Heterojunction for Boosting Photocatalytic H2 Evolution

The rational construction of a high-efficiency stepscheme heterojunctions is an effective strategy to accelerate the photocatalytic H₂.Unfortunately,the variant energy-level matching between two different semiconductor confers limited the photocatalytic performance.Herein,a newfangled graphitic-carbon nitride(g-C₃N₄)based isotype step-scheme heterojunction,which consists of sulfur-doped and defective active sites in one microstructural unit,is successfully developed by in-situ polymerizing N,N-dimethylformamide(DMF)and urea,accompanied by sulfur(S)powder.Therein,the polymerization between the amino groups of DMF and the amide group of urea endows the formation of rich defects.The propulsive integration of S-dopants contributes to the excellent fluffiness and dispersibility of lamellar g-C₃N₄.Moreover,the developed heterojunction exhibits a significantly enlarged surface area,thus leading to the more exposed catalytically active sites.Most importantly,the simultaneous introduction of S-doping and defects in the units of g-C₃N₄ also results in a significant improvement in the separation,transfer and recombination efficiency of photo-excited electron-hole pairs.Therefore,the resulting isotype step-scheme heterojunction possesses a superior photocatalytic H₂ evolution activity in comparison with pristine g-C₃N₄.The newly afforded metal-free isotype step-scheme heterojunction in this work will supply a new insight into coupling strategies of heteroatoms doping and defect engineering for various photocatalytic systems.     

Giant Emission Enhancement of Solid-State Gold Nanoclusters by Surface Engineering

Ligand-induced surface restructuring with heteroatomic doping is used to precisely modify the surface of a prototypical [Au₂₅(SR¹)₁₈]⁻ cluster ( 1 ) while maintaining its icosahedral Au₁₃ core for the synthesis of a new bimetallic [Au₁₉Cd₃(SR²)₁₈]⁻ cluster ( 2 ). Single-crystal X-ray diffraction studies reveal that six bidentate Au₂(SR¹)₃ motifs (L2) attached to the Au₁₃ core of 1 were replaced by three quadridentate Au₂Cd(SR²)₆ motifs (L4) to create a bimetallic cluster 2 . Experimental and theoretical results demonstrate a stronger electronic interaction between the surface motifs (Au₂Cd(SR²)₆) and the Au₁₃ core, attributed to a more compact cluster structure and a larger energy gap of 2 compared to that of 1 . These factors dramatically enhance the photoluminescence quantum efficiency and lifetime of crystal of the cluster 2 . This work provides a new route for the design of a wide range of bimetallic/alloy metal nanoclusters with superior optoelectronic properties and functionality.     

Enhance ZnO Photocatalytic Performance via Radiation Modified g-C3N4

Environmental pollution, especially water pollution, is becoming increasingly serious. Organic dyes are one type of the harmful pollutants that pollute groundwater and destroy ecosystems. In this work, a series of graphitic carbon nitride (g-C₃N₄)/ZnO photocatalysts were facilely synthesized through a grinding method using ZnO nanoparticles and g-C₃N₄ as the starting materials. According to the results, the photocatalytic performance of 10 wt.% CN-200/Z-500 (CN-200, which g-C₃N₄ was 200 kGy, referred to the irradiation metering. Z-500, which ZnO was 500 °C, referred to the calcination temperature) with the CN-200 exposed to electron beam radiation was better than those of either Z-500 or CN-200 alone. This material displayed a 98.9% degradation rate of MB (20 mg/L) in 120 min. The improvement of the photocatalytic performance of the 10 wt.% CN-200/Z-500 composite material was caused by the improvement of the separation efficiency of photoinduced electron–hole pairs, which was, in turn, due to the formation of heterojunctions between CN-200 and Z-500 interfaces. Thus, this study proposes the application of electron-beam irradiation technology for the modification of photocatalytic materials and the improvement of photocatalytic performance.     

Boosting the Energy Density of Carbon-Based Aqueous Supercapacitors by Optimizing the Surface Charge

The voltage of carbon-based aqueous supercapacitors is limited by the water splitting reaction occurring in one electrode, generally resulting in the promising but unused potential range of the other electrode. Exploiting this unused potential range provides the possibility for further boosting their energy density. An efficient surface charge control strategy was developed to remarkably enhance the energy density of multiscale porous carbon (MSPC) based aqueous symmetric supercapacitors (SSCs) by controllably tuning the operating potential range of MSPC electrodes. The operating voltage of the SSCs with neutral electrolyte was significantly expanded from 1.4 V to 1.8 V after simple adjustment, enabling the energy density of the optimized SSCs reached twice as much as the original. Such a facile strategy was also demonstrated for the aqueous SSCs with acidic and alkaline electrolytes, and is believed to bring insight in the design of aqueous supercapacitors.     

g-C3N4/BiVO4复合催化剂的制备及应用于光催化还原CO2的性能

用简单的超声分散法合成了具有可见光响应的类石墨氮化碳(g-C₃N₄)/BiVO₄复合光催化剂. 采用X射线衍射(XRD), X射线光电子能谱(XPS), 扫描电子显微镜(SEM), 透射电子显微镜(TEM), 紫外-可见(UV-Vis)分光光谱, 傅里叶红外变换(FTIR)光谱, 荧光发射谱(PL)和光电流响应等技术对所制备催化剂进行相关表征. 通过可见光下(λ> 420 nm)光催化还原CO₂的性能来评价样品的光催化活性, 发现不同复合比的催化剂中, 含40% (w) g-C₃N₄的复合催化剂表现出最高的光催化活性, 其催化活性分别为纯g-C₃N₄纳米片和纯BiVO₄的催化活性的2倍和4倍.光催化活性增加的主要原因是g-C₃N₄和BiVO₄之间形成了异质结, 且相互间能级匹配, 有利于光生电子和空穴的分离.     

Three‐in‐One Oxygen Vacancies: Whole Visible‐Spectrum Absorption,Efficient Charge Separation,and Surface Site Activation for Robust CO2 Photoreduction

A facile and controllable in situ reduction strategy is used to create surface oxygen vacancies (OVs) on Aurivillius‐phase Sr₂Bi₂Nb₂TiO₁₂ nanosheets, which were prepared by a mineralizer‐assisted soft‐chemical method. Introduction of OVs on the surface of Sr₂Bi₂Nb₂TiO₁₂ extends photoresponse to cover the whole visible region and also tremendously promotes separation of photoinduced charge carriers. Adsorption and activation of CO₂ molecules on the surface of the catalyst are greatly enhanced. In the gas‐solid reaction system without co‐catalysts or sacrificial agents, OVs‐abundant Sr₂Bi₂Nb₂TiO₁₂ nanosheets show outstanding CO₂ photoreduction activity, producing CO with a rate of 17.11 μmol g^?1 h^?1, about 58 times higher than that of the bulk counterpart, surpassing most previously reported state‐of‐the‐art photocatalysts. Our study provides a three‐in‐one integrated solution to advance the performance of photocatalysts for solar‐energy conversion and generation of renewable energy.     

Two‐Dimensional Layered Zinc Silicate Nanosheets with Excellent Photocatalytic Performance for Organic Pollutant Degradation and CO2 Conversion

Two‐dimensional (2D) photocatalysts are highly attractive for their great potential in environmental remediation and energy conversion. Herein, we report a novel layered zinc silicate (LZS) photocatalyst synthesized by a liquid‐phase epitaxial growth route using silica derived from vermiculite, a layered silicate clay mineral, as both the lattice‐matched substrate and Si source. The epitaxial growth of LZS is limited in the 2D directions, thus generating the vermiculite‐type crystal structure and ultrathin nanosheet morphology with thicknesses of 8–15 nm and a lateral size of about 200 nm. Experimental observations and DFT calculations indicated that LZS has a superior band alignment for the degradation of organic pollutants and reduction of CO₂ to CO. The material exhibited efficient photocatalytic performance for 4‐chlorophenol (4‐CP) degradation and CO₂ conversion into CO and is the first example of a claylike 2D photocatalyst with strong photooxidation and photoreduction capabilities.     

Controlled Synthesis of a Vacancy-Defect Single-Atom Catalyst for Boosting CO2 Electroreduction

The reaction of precursors containing both nitrogen and oxygen atoms with Ni^II under 500 °C can generate a N/O mixing coordinated Ni-N₃O single-atom catalyst (SAC) in which the oxygen atom can be gradually removed under high temperature due to the weaker Ni−O interaction, resulting in a vacancy-defect Ni-N₃-V SAC at Ni site under 800 °C. For the reaction of Ni^II with the precursor simply containing nitrogen atoms, only a no-vacancy-defect Ni-N₄ SAC was obtained. Experimental and DFT calculations reveal that the presence of a vacancy-defect in Ni-N₃-V SAC can dramatically boost the electrocatalytic activity for CO₂ reduction, with extremely high CO₂ reduction current density of 65 mA cm⁻² and high Faradaic efficiency over 90 % at −0.9 V vs. RHE, as well as a record high turnover frequency of 1.35×10⁵ h⁻¹, much higher than those of Ni-N₄ SAC, and being one of the best reported electrocatalysts for CO₂-to-CO conversion to date.     

Solvent Effect on the Photocatalytic Activity of g-C3N4/BiOBr and its Effect on Degradation of Acetochlor

Russian Journal of Physical Chemistry A - g-C3N4/BiOBr composites were obtained via solvothermal method. XRD, SEM, FTIR, UV–Vis DRS, BET, and BJH methods were used to characterize the...     

Hydrocarbon production by addition of Cu-ZnO on g-C3N4 for CO2 conversion

In this study, copper/zinc oxide/graphite nitrogen carbide (Cu/ZnO/g-C₃N₄) is prepared using a hydrothermal method and applied as a photocatalyst for CO₂ photoreduction. The morphology and structural properties of the obtained Cu/ZnO/g-C₃N₄ are systematically characterized through X-ray powder diffraction, ultraviolet–visible absorption spectroscopy, transmission electronic microscopy, and photoluminescence spectroscopy. A 3 wt% Cu/ZnO/g-C₃N₄ photocatalyst exhibits high CH₄ (40.7 μmol g⁻¹ hr⁻¹), CO (65.1 μmol g⁻¹ hr⁻¹), and CH₃OH (92.5 μmol g⁻¹ hr⁻¹) production rates, which are 38.3, 77.1, and 58.1 fold higher than the pure g-C₃N₄. The production rate is higher than those for bulk g-C₃N₄ and ZnO/g-C₃N₄. Finally, the reaction mechanism of Cu/ZnO/C₃N₄ is proposed in this study.     

化学镀法制备CoP量子点修饰g-C3N4用于光催化产氢（英文）

光催化分解水制氢被认为是解决当前能源危机和环境污染问题的重要途径之一.在众多光催化剂中,石墨相氮化碳(g-C3N4)因其具有高的热稳定性、高的化学稳定性、合适的能带位置以及成本低廉等优点,受到光催化领域研究者的广泛关注,成为研究热点.然而,由于g-C3N4的禁带宽度较大(Eg=2.7 eV),导致其对可见光的响应较差,而且光生电子-空穴对在其中易于复合,从而导致其光催化产氢活性较低.已有研究表明,助催化剂可以有效地促进催化剂中光生载流子的分离和传输,从而提高光催化剂的光催化活性和氢气的产生速率.目前使用最广泛的助催化剂多为贵金属(Au,Ag,Pt和Pd等),然而贵金属储量低、成本高,极大地限制了其实际应用.因而,开发适用于光催化水分解制氢的非贵金属助催化剂成为该领域的研究热点.其中,用非贵金属助催化剂修饰g-C3N4制备高效光催化剂分解水制氢技术引起了人们极大的兴趣.过渡金属磷化物(FeP,CoP,CuP,NiP等)是一种有效的光催化辅助催化剂.然而,这些金属磷化物的合成通常使用有毒的有机磷化合物和白磷或涉高温煅烧.特别是在传统水热法制备金属磷化物过程中会释放大量氢气,导致容器内压力过高,造成较大的安全问题.据报道,在这些磷化物中,磷化钴由于其合适的能带结构和较高的导电性,作为光催化分解水助催化剂受到了广泛关注.然而,截至目前,关于磷化钴作为助催化剂用于光催化的实用技术报道很少,特别是在温和条件下制备磷化钴修饰的g-C3N4复合光催化剂的研究还有待进行.本文研究了以CoP作为助催化剂来改进g-C3N4(制备g-C3N4/CoP),并用于光催化水裂解制氢气.复合光催化剂g-C3N4/CoP经由两步反应合成.第一步采用尿素热分解法制备g-C3N4,第二步通过化学镀法将CoP修饰在g-C3N4表面.采用XRD,TEM,UV-DRS和XPS等手段表征了g-C3N4/CoP光催剂的性质.结果表明,CoP以量子点(QDs)形式均匀分布在g-C3N4表面,显著提高了g-C3N4的光催化活性.不同CoP负载量的样品中,g-C3N4/CoP-4%表现出优异的光催化活性,H2生成速率为936μmol g^-1 h^-1,甚至高于4%Pt负载的g-C3N4(H2的生成速率仅为665μmol g^-1 h^-1).从紫外可见光谱上看,g-C3N4在451 nm达到吸收波长上限,但与CoP复合后,g-C3N4/CoP-4%的吸收波长上限延展到497 nm.此外,光致发光和光电流测试结果证实,将CoP量子点负载到g-C3N4上不仅可以降低光生电荷-空穴对的复合,而且可以改善光生e--h+对的转移,从而提高光催化剂的产氢性能.这项工作为开发高效的非贵金属助催化剂修饰g-C3N4的技术提供了一个可行策略,所制材料在光催化制氢领域显示出潜在的应用前景.     

In Situ Synthesis of Cu3P/P-Doped g-C3N4 Tight 2D/2D Heterojunction Boosting Photocatalytic H2 Evolution†

Heterojunction design in a two-dimensional (2D) fashion has been deemed beneficial for improving the photocatalytic activity of g-C₃N₄ because of the promoted interfacial charge transfer, yet still facing challenges. Herein, we construct a novel 2D/2D Cu₃P nanosheet/P-doped g-C₃N₄ (PCN) nanosheet heterojunction photocatalyst (PCN/Cu₃P) through a simple in-situ phosphorization treatment of 2D/2D CuS/g-C₃N₄ composite for photocatalytic H₂ evolution. We demonstrate that the 2D lamellar structure of both CuS and g-C₃N₄ could be well reserved in the phosphorization process, while CuS and g-C₃N₄ in-situ transformed into Cu₃P and PCN, respectively, leading to the formation of PCN/Cu₃P tight 2D/2D heterojunction. Owing to the large contact area provided by intimate face-to-face 2D/2D structure, the PCN/Cu₃P photocatalyst exhibits significantly enhanced charge separation efficiency, thus achieving a boosted visible-light-driven photocatalytic behavior. The highest rate for H₂ evolution reaches 5.12 μmol·h^–1, nearly 24 times and 368 times higher than that of pristine PCN and g-C₃N₄, respectively. This work represents an excellent example in elaborately constructing g-C₃N₄-based 2D/2D heterostructure and could be extended to other photocatalyst/co-catalyst system.      

Significantly Enhanced Performance of g-C3N4/Bi2MoO6 Films for Photocatalytic Degradation of Pollutants Under Visible-light Irradiation

The films of photocatalysts have been widely used in decomposition pollutants. In this study, the films were successfully prepared from Bi₂MoO₆ and g-C₃N₄/Bi₂MoO₆ by a simple method, respectively. The samples were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), Fourier transform infrared spectroscopy(FTIR), photoluminescence(PL), UV-Vis diffuse reflectance spectroscopy(DRS) and electrochemical experiments to investigate crystalline structure, morphology, composition and properties. The photocatalytic activity of the photocatalyst films for the pollutants was evaluated by degradation of methylene blue(MB) in aqueous solution under visible light irradiation. Experiments revealed that the film of g-C₃N₄/Bi₂MoO₆ exhibited higher photocatalytic ability compared to the single-component photocatalyst, and proved its stability. The superior catalytic performance can be attributed to the effective separation of electron-hole pairs and the reduced rate of recombination. This work is of great value for the preparation of photocatalysts films.     

g-C3N4表面改性及其光催化制H2与CO2还原研究进展

Solar energy is the largest renewable energy source in the world and the primary energy source of wind energy, tidal energy, biomass energy, and fossil fuel. Photocatalysis technology is a sunlight-driven chemical reaction process on the surface of photocatalysts that can generate H₂ from water, decompose organic contaminants, and reduce CO₂ into organic fuels. As a metal-free polymeric material, graphite-like carbon nitride (g-C₃N₄) has attracted significant attention because of its special band structure, easy fabrication, and low costs. However, some bottlenecks still limit its photocatalytic performance. To date, numerous strategies have been employed to optimize the photoelectric properties of g-C₃N₄, such as element doping, functional group modification, and construction of heterojunctions. Remarkably, these modification strategies are strongly associated with the surface behavior of g-C₃N₄, which plays a key role in efficient photocatalytic performance. In this review, we endeavor to provide a comprehensive summary of g-C₃N₄-based photocatalysts prepared through typical surface modification strategies (surface functionalization and construction of heterojunctions) and elaborate their special light-excitation and response mechanism, photo-generated carrier transfer route, and surface catalytic reaction in detail under visible-light irradiation. Moreover, the potential applications of the surface-modified g-C₃N₄-based photocatalysts for photocatalytic H₂ generation and reduction of CO₂ into fuels are summarized. Finally, based on the current research, the key challenges that should be further studied and overcome are highlighted. The following are the objectives that future studies need to focus on: (1) Although considerable effort has been made to develop a surface modification strategy for g-C₃N₄, its photocatalytic efficiency is still too low to meet industrial application standards. The currently obtained solar-to‑hydrogen (STH) conversion efficiency of g-C₃N₄ for H₂ generation is approximately 2%, which is considerably lower than the commercial standards of 10%. Thus, the regulation of the surface/textural properties and electronic band structure of g-C₃N₄ should be further elucidated to improve its photocatalytic performance. (2) Significant challenges remain in the design and construction of g-C₃N₄-based S-scheme heterojunction photocatalysts by facile, low-cost, and reliable methods. To overcome the limitations of conventional heterojunctions thoroughly, a promising S-scheme heterojunction photocatalytic system was recently reported. The study further clarifies the charge transfer route and mechanism during the catalytic process. Thus, the rational design and synthesis of g-C₃N₄-based S-scheme heterojunctions will attract extensive scientific interest in the next few years in this field. (3) First-principle calculation is an effective strategy to study the optical, electrical, magnetic, and other physicochemical properties of surface strategy modified g-C₃N₄, providing important information to reveal the charge transfer path and intrinsic catalytic mechanism. As a result, density functional theory (DFT) computation will be paid increasing attention and widely applied in surface-modified g-C₃N₄-based photocatalysts.     

碳自掺杂g-C3N4光催化性能的原位光微量热-荧光光谱研究

通过在尿素前驱体中添加单宁酸, 原位缩聚形成碳自掺杂石墨相氮化碳(g-C₃N₄). 利用X射线光电子能谱(XPS)、 场发射扫描电子显微镜(FESEM)、 X射线衍射(XRD)仪和同步热分析(TG-DSC)等方法对碳自掺杂 g-C₃N₄的形貌、 物相结构和能带价态组分进行表征分析, 结合紫外-可见吸收光谱(UV-Vis)和原位光微量热-荧光光谱联用仪获得碳自掺杂g-C₃N₄降解罗丹明B的原位热/动力学信息和三维荧光光谱信息, 探讨了光催化降解罗丹明B的微观机制. 结果表明, 单宁酸浓度≤10 mg/mL时, 碳会取代七嗪单元结构的氮原子形成g-C₃N₄骨架碳自掺杂; 单宁酸浓度≥ 20 mg/mL时, 碳以无定形形式沉积负载在g-C₃N₄表面上形成无定形碳自掺杂. 骨架碳自掺杂g-C₃N₄形成的π电子有效缩短了禁带宽度, 减小了光生电子-空穴复合几率, 比无定形C掺杂g-C₃N₄显示出更优异的光催化性能, 催化主要活性物种为h⁺和·O{}_{\mathrm{2}}^{-}. 碳自掺杂g-C₃N₄光催化降解过程可分为光响应吸热、 降解污染物放热平衡过程和稳定放热3个过程. 其中骨架碳自掺杂g-C₃N₄(C/N摩尔比为0.844)在光照1000 s内, 三维荧光光谱检测的RhB降解率锐减, 光照1000 s后, 其RhB降解率为87.6%, 分别是原始g-C₃N₄和无定形碳自掺杂g-C₃N₄的3.13倍和1.95倍. 光照1000 s后, 光微量热计显示以矿化和降解非荧光发色中间产物为主, 并保持以热变速率为(0.9799±0.5356) μJ/s稳定放热, 为拟零级反应过程, 是光催化反应的决速步骤.     

Photocatalytic Performance and Mechanism Study of High Specific Area TiO2 Combined with g-C3N4

g-C3N4 coupled with high specific area TiO2(HSA-TiO2) compos-ite was prepared by a simple solvothermal method,which was easy to operate with low energy consump-...     

Graphitic Carbon Nitride (g-C3N4): An Interface Enabler for Solid-State Lithium Metal Batteries

Solid-state Li metal batteries (SSLMBs) have attracted considerable interests due to their promising energy density as well as high safety. However, the realization of a well-matched Li metal/solid-state electrolyte (SSE) interface remains challenging. Herein, we report g-C₃N₄ as a new interface enabler. We discover that introducing g-C₃N₄ into Li metal can not only convert the Li metal/garnet-type SSE interface from point contact to intimate contact but also greatly enhance the capability to suppress the dendritic Li formation because of the greatly enhanced viscosity, decreased surface tension of molten Li, and the in situ formation of Li₃N at the interface. Thus, the resulting Li-C₃N₄|SSE|Li-C₃N₄ symmetric cell gives a significantly low interfacial resistance of 11 Ω cm² and a high critical current density (CCD) of 1500 μA cm⁻². In contrast, the same symmetric cell configuration with pristine Li metal electrodes has a much larger interfacial resistance (428 Ω cm²) and a much lower CCD (50 μA cm⁻²).