聚四氢呋喃三元醇的合成及表征

合成了一种新的三元引发剂[C₂H₅C(CH₂OCH₂CH₂CO+ClO₄^-)₃],并用于制备聚四氢呋喃三元醇.用¹HNMR,FTIR和GPC法对聚合物的结构进行了表征.结果表明,产物中环状齐聚物的含量极低.对聚合物水解产物的分子量及分子量分布测定结果表明,产物为预期的三元醇,聚合反应过程中链转移可以忽略,聚合物的分子量可控.     

两亲型聚L-亮氨酸-聚乙二醇单甲醚嵌段共聚物的合成与表征

开环聚合;生物降解共聚物;两亲型聚L-亮氨酸-聚乙二醇单甲醚嵌段共聚物的合成与表征     

聚乙烯丙烯酸与聚(2-乙基-2-噁唑啉)接枝共聚物的合成及表征

选用聚乙烯 丙烯酸 (EAA)为接枝母体 ,首先摸索出 2 乙基 2 唑啉阳离子开环聚合的规律 ,得到高转化率端基为活性离子的聚 ( 2 乙基 2 唑啉 ) (PEOX) ,再与EAA羟基侧基进行接枝反应 ,考察了开环聚合条件及接枝反应条件对接枝率的影响 ,在一定的条件下得到了接枝率 >2 5%的聚乙烯 丙烯酸与聚 ( 2 乙基 2 唑啉 )的接枝共聚物 (EAA g PEOX) .该接枝物用于聚对苯二甲酸丁二醇酯 /聚丙烯 (PBT/PP)共混体系中作相容剂 ,可提高两者的相容性 .     

聚酯酰胺的合成

聚（酯酰胺）（PEA）的主链中同时具有酯键和酰胺键,兼具了聚酯（polyester）的生物降解性和相容性以及聚酰胺（polyamide）优异的机械性能,在药物控释、组织工程以及热塑性弹性体等领域应用广泛。缩合聚合是合成聚酯酰胺最初的方法,近年来开环聚合（ROP）成为制备聚酯酰胺的主要策略,本文从环状单体均聚、环状单体共聚、环状单体和线形单体共聚等方面总结了聚酯酰胺合成的研究进展。同时,介绍了基于多组分聚合反应（MCP）的新合成方法,并对聚酯酰胺材料的发展进行了探讨和展望。     

聚乙烯—丙烯酸与聚（2—乙基—2—恶唑啉）接枝共聚物的合成及表征

选用聚乙烯－丙烯酸（ＥＡＡ）为接枝母体,首先摸索出２－乙基－２－恶唑啉阳离子开环聚合的规律,得到高转化率端基为活性翁离子的聚（２－乙基－２－恶唑啉）（ＰＥＯＸ）,再与ＥＡＡ羟基侧基进行接枝反应,考察了开环聚合条件及接枝反应条件对接枝率的影响,在一定的条件下得到了接枝率〉２５％的聚乙烯－丙烯酸与聚（２－乙基－２－恶唑啉）的接枝共聚物（ＥＡＡ－ｇ－ＰＥＯＸ）。该接枝物用于聚对苯二甲酸丁醇酯／聚丙烯（Ｐ     

Preparation and properties of poly(alkyl vinyl ether-2-ethyl-2-oxazoline) diblock copolymers

A method for the synthesis of well-defined poly(alkyl vinyl ether–2-ethyl-2-oxazoline) diblock copolymers with hydrolytically stable block linkages has been developed. Monofunctional poly(alkyl vinyl ether) oligomers with nearly Poisson molecular weight distributions were prepared via a living cationic polymerization method using chloroethyl vinyl ether together with HI/ZnI₂ as the initiating system and lithium borohydride as the termination reagent. Using the resultant chloroethyl ether functional oligomers in combination with sodium iodide as macroinitiators, 2-ethyl-2-oxazoline was polymerized in chlorobenzene/NMP to afford diblock copolymers. A series of poly(methyl vinyl ether–2-ethyl-2-oxazoline) diblock materials were found to have polydispersities of ≈ 1.3–1.4 and are microphase separated as indicated by two T_g's in their DSC thermograms. These copolymers are presently being used as model materials to study fundamental parameters important for steric stabilization of dispersions in polar media. © 1993 John Wiley & Sons, Inc.     

两亲性三嵌段共聚物PAA-PHB-PAA的合成及表征

本文用ATRP方法, 以两端溴化的聚β-羟基丁酸酯链段(Br-PHB-Br)作为大分子引发剂, 丙烯酸叔丁酯为单体, 合成了一种新的三嵌段共聚物聚丙烯酸叔丁酯-聚β-羟基丁酸酯-聚丙烯酸叔丁酯(PtBA-PHB-PtBA). 在酸性条件下进一步水解, 得到了一种两亲性的聚丙烯酸-聚β-羟基丁酸酯-聚丙烯酸(PAA-PHB-PAA)三嵌段共聚物.     

三嵌段共聚物PS-PHB-PS的原子转移自由基聚合

为了克服聚β-羟基丁酸酯(PHB)的弱点, 得到性能良好的新材料, 本文利用原子转移自由基聚合方法, 以Br-PHB-Br为大分子引发剂, 苯乙烯为单体, 在CuBr/N,N,N′,N″,N″-五甲基–二乙基三胺(PMDETA)催化体系作用下合成了一种新的三嵌段共聚物聚苯乙烯-聚β-羟基丁酸酯-聚苯乙烯(PS-PHB-PS). 共聚物的链结构利用¹H NMR和¹³C NMR进行了表征, 分子量特性和链段组成利用凝胶渗透色谱(SEC)方法进行了测定. 聚合物的分子量随单体转化率的增加而线性增加, 分子量分布指数相对较窄. 这些特征都满足原子转移自由基活性聚合的理想要求. 所得到的共聚物PS-PHB-PS具有较好的生物相容性, 与PHB相比具有良好的耐热性.     

Synthesis of Starburst Oligoanilino[60]fullerene and Poly(Dimethylsiloxane) Triblock Copolymers

Abstract

A new synthetic approach for the fabrication of core‐shell like conducting elastomers was described. The approach utilized the facile intermolecular self‐assembly of poly(dimethylsiloxane) (PDMS) in DMSO leading to formation of a core particle, while soluble oligoaniline (A _x ) segments dispersed in the solution phase resembling a shell overlayer for building the morphology. This morphology was demonstrated by bis[penta(tetraanilinofullereno)] bis(aminopropyl)poly(dimethylsiloxane) [PDMS‐(F5A₄)₂] triblock co‐oligomers synthesized using a functionalized C₆₀ derivative as a linker. Observation of ¹H NMR spectroscopic responses on the PDMS particle formation in DMSO‐d ₆ is consistent with the proposed core‐shell geometry with oligoaniline moieties located at the shell overlayer.     

Characterization of poly(2-oxazoline) homo- and copolymers by liquid chromatography at critical conditions

In this study liquid chromatography at critical conditions for poly(2-ethyl-2-oxazoline)s (PEtOx) has been performed for the first time in order to analyze functional PEtOx homopolymers and block copolymers. Besides the verification of the critical point of adsorption with two series of ester end group functionalized PEtOx homopolymers, to evaluate the effect of both the chain length dependence and the end group polarity, using a cyano column with a solvent combination of 2-propanol and water, also two-dimensional liquid chromatography (2D-LC) has been applied for a poly(2-oxazoline) block copolymer. The combined characterization techniques provided further information about the polymerization procedure with regard to the formation of side-products by separation of the block copolymer from the corresponding homopolymer impurities. In addition, hyphenation of LCCC with MALDI-TOF MS and ESI-Q-TOF tandem mass spectrometry verified the obtained results.     

苯乙烯-氧乙烯-苯乙烯三嵌段聚合物的受限结晶行为的反气相分析

 采用反气相法研究了苯乙烯 氧乙烯 苯乙烯三嵌段结晶聚合物 (PS PEO PS)的结晶熔融相变 ,测定了PS PEO PS的结晶度、熔点以及熔程 ,探讨了正构烷烃探针分子的碳链长度对测定结果的影响。研究结果表明 :PS PEO PS的微相分离对PEO链段的结晶行为有较大的影响 ,其晶体结构中存在由多种不完善PEO结晶和PS非结晶构成的中间层 ;正构烷烃探针分子的碳链长度对测定PS PEO PS的熔点和熔程无影响 ,但对结晶度测定和PEO结晶熔融相变的检测影响较大 ,所测得PS PEO PS的结晶度随正构烷烃探针分子碳链的增长而降低。     

Synthesis of Amphiphilic ABC Triblock Copolymers with PEO as the Middle Block

Summary: Stepwise anionic polymerization, catalytic hydrogenation, and atom transfer radical polymerization were performed to synthesize an amphiphilic ABC triblock copolymer, poly(ethylene‐alt‐propylene)‐block‐poly(ethylene oxide)‐block‐poly(hexyl methacrylate) (PEP‐b‐PEO‐b‐PHMA), with hydrophilic PEO as the middle block. The resulting block copolymers have well‐defined molecular weights and narrow molecular weight distributions as revealed by ¹H NMR spectroscopy and gel permeation chromatography.

GPC chromatograms of an ABC triblock copolymer, PEP‐b‐PEO‐b‐PHMA, and its intermediate precursors exhibiting narrow polydispersities.     

聚(苯乙烯-b-2-甲基-2-（口恶）唑啉)嵌段共聚物的合成

核磁、离子色谱等测试方法证明 ,以烯丙基型卤代烷烃为引发剂引发的过渡金属催化的活性自由基聚合 ,所得聚合物的端基为卤素[13].由于Ｃ—Ｘ(Ｘ =Ｃｌ,Ｂｒ)键容易断裂 ,因此卤素端基的存在会影响聚合产物的热稳定性 .但由于Ｃ—Ｘ键易于进行各种反应 ,含卤素端基的聚合物可以作为大分子引发剂用于引发其它合适单体反应 ,从而使卤素端基转化为其它基团 ,或合成新型结构的共聚物 .环状单体 2 甲基 2 唑啉 (Ｍｅ ＯＸＺ)亲核性较强 ,可以直接由烯丙基型卤代物引发剂引发活性开环聚合[4 6 ],因此可望以含卤端基的活性聚合产物作为Ｍｅ ＯＸ…     

基于ATRP技术的多嵌段共聚物研究进展

原子转移自由基聚合(ATRP)技术是合成结构规整性聚合物的有效途径。综述了近十年来采用ATRP技术合成多嵌段共聚物的研究进展。从引发剂、共聚单体和反应条件等方面讨论了ABA型、ABC型和ABCBA型等类型多嵌段共聚物的合成、性质与潜在应用。对原子转移自由基聚合技术在合成功能性多嵌段共聚物中的应用前景进行了展望。     

Synthesis and emulsion copolymerization of amphiphilic poly(2-oxazoline) macromonomer possessing a vinyl ester group

The present article describes the synthesis and emulsion copolymerization of a block-type amphiphilic poly(2-oxazoline) macromonomer possessing a polymerizable vinyl ester group. The macromonomer was synthesized by one-pot two-stage block copolymerization of 2-oxazolines using vinyl iodoacetate as initiator. 2-Methyl- and 2-n-butyl-2-oxazolines were employed for the construction of hydrophilic and hydrophobic segments, respectively. The surface activities evaluated by the surface tension of the macromonomer in water were fairly good. Emulsion copolymerization of vinyl acetate with the macromonomer was carried out. The macromonomer acted as a polymeric surfactant, as well as a comonomer. The resulting copolymer latex particles were spherical and their diameter was in the sub-micron range. The effects of the composition of the macromonomer on the emulsion copolymerization and the resulting latex particles were examined. © 1993 John Wiley & Sons, Inc.     

Synthesis of novel macromonomers and telechelics of poly(2-alkyl-2-oxazoline)s

Novel macromonomers and telechelics of poly(2-alkyl-2-oxazoline) (PROZO) were syn-thesized by utilizing termination of propagating species (2-oxazolinium ions) in the living polymerization of 2-alkyl-2-oxazoline (ROZO) with suitable nucleophiles. Two types of p-vinylbenzyl–type macromonomers were obtained by terminating living PROZO with sodium p-vinylbenzyl alkoxide or with sodium p-vinylbenzyl mercaptide. The synthesis of telechelics having a functional group (SH, COOH) on both ends of PROZO was achieved by using a bis(2-oxazolinium salt) initiator. The PROZO dithiol was synthesized by two methods: (1) termination of the living species on both ends with NaSH, and (2) aminolysis of PROZO bis(O-ethyldithiocarbonate) given by treatment of the living PROZO with potassium O-ethyldithiocarbonate. Termination of the living PROZO with the sodium salt of di-t-butyl malonate yielded a PROZO with di-t-butyl malonate moieties on both polymer ends, from which the PROZO dicarboxylic acid was derived via free tetracarboxylic acid. © 1995 John Wiley & Sons, Inc.     

Enzymatic Synthesis and Characterization of Novel Amphiphilic Triblock Copolymer Poly（p-dioxanoneco-5-benzyloxytrimethylene carbonate）-block-poly（ethylene glycol）

In recent years, amphiphilic block copolymers consisting of hydrophilic and hydrophobic segments have attracted much attention, because of their unique phase behavior in aqueous media and potential applications as drug delivery systems1. Poly(ethylene gly…     

甲壳素-g-聚l-亮氨酸共聚物的制备及表征

在水／乙酸乙酯体系中，利用水溶性甲壳素分子上的自由氨基引发N-羧基-l-亮氨酸-环内酸酐(NCA)的开环聚合，将聚l-亮氨酸引入到甲壳素的侧链，制备了多糖／多肽杂化材料。由于反应中使用了水溶性甲壳素，反应可以在温和的条件下进行，且反应的转化率和接枝效率均较高。接枝共聚物的多肽链段长度可以通过NCA的投料量进行控制，得到各种肽链长度的接枝共聚物。通过元素分析、红外光谱、X射线衍射、差热分析和溶解实验等表征了接枝共聚物，结果表明：接枝共聚物的性能受多肽链段的长度影响较大，随着肽段长度的增加出现了a-螺旋结构。