Structural Variability of R2C Adducts of 3a,6a‐Diaza‐1,4‐diphosphapentalene: Tuning the N→P Bonding

3a,6a‐Diaza‐1,4‐diphosphapentalene (DDP) reacts with hexachlorocyclopentadiene to form a stable adduct (ClC)₄C=DDP ( 4 ). The phosphorus atom involved into coordination has a pyramidal arrangement but retains partial double bonding with carbon [1.752(3) Å]. At the same time, the P–N bond remains covalent [1.824(3) Å]. The adduct 4 is better described as a zwitterionic compound with strongly delocalized positive and negative charges. A similar zwitterionic adduct DDP=C(CN)₂ was prepared by the reactions of dichloro‐DDP ( 7 ) with malononitrile in the presence of Et₃N. DFT calculations showed that related structures are formed in the case of the substituents (ClC)₄C=, (HC)₄C=, (NC)₂C=, and (MeCO)₂C=, possessing electron‐delocalizing properties. Compounds with other R₂C groups (R = Ph, Me, C₆F₅, Cl), possessing electronegative properties as well, but insufficient e‐delocalization, demonstrate the noncovalent P–N bonding and a little shorter R₂C–P bond lengths (ca. 1.70 Å).     

Structures of X 34‐nylons in chain‐folded lamellae and gel‐spun fibers

Structural studies and morphological features of a new family of linear, aliphatic even–even, X 34‐nylons, with X = 2, 4, 6, 8, 10, and 12, are investigated with X‐ray diffraction and electron microscopy. Solution‐grown crystals were obtained by isothermal crystallization from N,N‐dimethylformamide solutions. The thickness of lamellar‐like crystals was orders of magnitude less than the chain lengths of the polymer samples used, implying that the chains fold to form chain‐folded lamellae. The results bear a close resemblance, with the noticeable exception of 2 34‐nylon, to those reported for nylon 6 6 and other even–even nylon chain‐folded lamellar crystals. The basic structure of the straight‐stem lamellar core is similar to that of the classic nylon 6 6 triclinic α structure, and the chains tilt ≈42° relative to the lamellar normal. In the case of 2 34‐nylon, the structure resembles the 2 Y nylon series, and the chain tilt angle reduces to 36.6°. These combined results suggest that, even with a relatively low frequency of amide units along the backbone of these molecules, hydrogen bonding is still the dominant element in controlling the behavior, structure, and properties of these polymers. In addition, gels were prepared in concentrated sulfuric acid, and gel‐spun fibers were studied using X‐ray diffraction. The data are interpreted in terms of a modified nylon triclinic α structure that bears a resemblance to the structure of even–even nylons at elevated temperatures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2685–2692, 2002     

One‐Pot Domino Synthesis of 3‐Amino‐1,2‐dihydroisoquinolines

A one‐pot method for the synthesis of 3‐amino‐7‐nitro‐1,2‐dihydroisoquinoline‐4‐carbonitriles from 2‐chloro‐5‐nitrobenzylamines and malononitrile has been developed.     

A Fluorescent Blue Phosphazene Dye: Synthesis,Structure and Optical Properties of 1,6‐Bis(Dimethylamino)‐2,5,7,10‐Tetraazo‐1,6λ5‐Diphosphapyrene

Herein we report on the synthesis, structure, and optical properties of the fluorescent blue phosphazene dye 1,6‐bis(dimethylamino)‐2,5,7,10‐tetraazo‐1,6λ⁵‐diphosphapyrene, which was isolated as the unexpected product of the reaction between 1,4,5,8‐(tetraamino)naphthalene and [P(NMe₂)₃Br]Br. This dye, which turned out to be soluble in water and a range of organic solvents (including hexane, tetrahydrofuran / petroleum ether, acetonitrile, and ethanol), was structurally characterized by XRD. Its absorption as well as emission spectra and their sensitivity to pH variations were analyzed. The experimental work is complemented by quantum chemical calculations on the possible intermediate on the way to the isolated product and on its pK_a value.     

Synthesis and X‐ray single‐crystal structure study of 5,5′‐bis(silyl)‐functionalized 3,3′‐dibromo‐2,2′‐dithiophenes

A high‐yield synthesis toward 5,5′‐bis(silyl)‐functionalized 3,3′‐dibromo‐2,2′‐dithiophenes with very efficient work‐up procedure is presented. The molecular structures of two silyl functionalized dibromo‐dithiophenes in the solid state have been determined to investigate the structural influences of different functional groups on the degree of π‐conjugation within the dithiophene moieties, as well as their packing properties. The planar alignment of the tert‐butyldimethylsilyl‐functionalized dibromo‐dithiophene shows a significantly higher degree of conjugation of the π‐system with a more favorable molecular packing than the skewed arrangement of the triisopropylsilyl‐substituted species. Copyright © 2005 John Wiley & Sons, Ltd.     

Isolation and Structural Characterization of Di‐ and Tetra‐protonated Forms of the Macrocyclic Hexaamine trans‐6,13‐Dimethyl‐1,4,8‐11‐tetraazacyclodecane‐6,13‐diamine

Cations derived by protonation of the ligand title compound (L¹) have been structurally characterized in their di‐ and tetra‐ protonated forms in the salts [H₂L¹][ClO₄]₂·2H₂O and [H₄L¹][ZnCl₄]₂·4H₂O. In both structures, one half of the formula unit comprises the asymmetric unit of the structure, the macrocycle being centrosymmetric, with the two macrocycles adopting similar conformations. In both salts, a pair of diagonally opposed macrocyclic secondary amine groups are protonated; in the [H₄L¹]⁴⁺ salt, the additional pair of protons are accommodated on the exocyclic pendant amine groups. The dispositions of the pendent amines differ between the two structures, being ‘equatorial’ with respect to the macrocyclic ring in the [H₂L¹]²⁺ salt, and ‘axial’ in the [H₄L¹]⁴⁺ salt. In other structurally characterized compounds containing [H₄L¹]⁴⁺ the equatorial disposition was found in the ferricyanide adduct, while in the tetraperchlorate salt the axial disposition was identified. The differences in disposition of the exocyclic groups are ascribed to the extensive H‐bonding in the lattices.     

1,3‐Dihydro‐1‐hydroxy‐3‐morpholin‐4‐yl‐2,1‐benzoxaborole: product of the reaction of o‐formylphenylboronic acid with morpholine

o‐Formylphenylboronic acid reacts with morpholine to form 1,3‐dihydro‐1‐hydroxy‐3‐morpholin‐4‐yl‐2,1‐benzoxaborole. The typical hydrogen‐bonded dimer motif with a planar benzoxaborole fragment has been obtained in the solid state. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and Magnetic Properties of Two New Cobalt Complexes Constructed by Semirigid V‐shaped 5‐(4‐Carboxyphenoxy)‐pyridine‐2‐carboxylic Acid

Two cobalt complexes, [Co₃(L)₂(CH₃OH)₂(μ₃‐OH)₂] ( 1 ) and [Co(L)(bpe)_0.5] · H₂O ( 2 ) [H₂L = 5‐(4‐carboxyphenoxy)‐pyridine‐2‐carboxylic acid; bpe = 1, 2‐bis(4‐pyridyl)ethylene] were synthesized and fully characterized by elemental analyses, IR spectroscopy, single‐crystal X‐ray diffraction, thermogravimetric analysis (TGA), and magnetic analysis. Complex 1 has a two‐dimensional (2D) structure with puckered Co–O–Co chains, and 2 displays a three‐dimensional (3D) network containing one‐dimensional rectangular channels with dimensions of 9.24 × 13.84 Å. In complex 1 , variable‐temperature magnetic susceptibility measurements indicate antiferromagnetic interactions between cobalt magnetic centers.     

Wet‐Chemical Synthesis of Nanoscale Iron Boride,XAFS Analysis and Crystallisation to α‐FeB

The reaction of lithium tetrahydridoborate and iron bromide in high boiling ether as reaction medium produces an ultrafine, pyrophoric and magnetic precipitate. X‐ray and electron diffraction proved the product to be amorphous. According to X‐ray absorption fine structure spectroscopy (XAFS) the precipitate has FeB structure up to nearly two coordination spheres around an iron absorber atom. Transmission electron microscopy (TEM) confirms the ultrafine powder to be nanoscale. Subsequent annealing at 450 °C causes the atoms to arrange in a more distinct FeB structure, and further thermal treatment to 1050 °C extends the local structure to the α‐modification of FeB. Between 1050 °C and 1500 °C α‐FeB is transformed into β‐FeB.     

Synthesis,spectroscopic and X‐ray single‐crystal structure study of bis(2‐methoxy‐ethanolato)‐bis(8‐quinolinato)titanium(IV)

Reaction of Ti(OCH₂CH₂OR)₄ (R?CH₃ and C₂H₅) with 8‐hydroxyquinoline in benzene at room temperature resulted in the formation of Ti(C₉H₆NO)₂(OCH₂CH₂OR)₂, characterized by IR, ¹H‐NMR, UV and mass spectroscopies. The molecular structure of Ti(C₉H₆NO)₂(OCH₂CH₂OCH₃)₂ has been determined by single‐crystal X‐ray structure analysis. The geometry at titanium is a distorted octahedron, with the nitrogen atoms of quinolinate occupying the trans position with respect to oxygens of the 2‐methoxyethoxy groups. The prepared quinolinate derivatives of titanium alkoxides are very stable towards hydrolysis and harsh conditions are required for hydrolytic cleavage. Copyright © 2005 John Wiley & Sons, Ltd.     

Experimental and quantum chemical calculational studies on N‐[4‐(3‐Methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐N′‐pyridin‐3ylmethylene‐hydrazine

The title molecule, N‐[4‐(3‐Methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐N′‐pyridin‐3ylmethylene‐ hydrazine (C₂₀ H₂₀ N₄ S₁), was characterized by ¹H‐NMR, ¹³C‐NMR, IR, UV‐visible, and X‐ray determination. In addition to the molecular geometry from X‐ray experiment, the molecular geometry, vibrational frequencies and gauge including atomic orbital ¹H‐ and ¹³C‐NMR chemical shift values of the title compound in the ground state have been calculated using the Hartree‐Fock and density functional method (B3LYP) with 6‐31G(d, p) basis set. The calculated results show that optimized geometries can well reproduce the crystal structural parameters. By using time‐dependent density functional theory method, electronic absorption spectrum of the title compound has been predicted. © 2011 Wiley Periodicals, Inc.     

Synthesis and single crystal X‐ray determination of the Schiff base 1‐[(2‐isopropyl‐5‐methylphenoxy)hydrazono] ethyl ferrocene

The reaction of acetylferrocene [Fe(η‐C₅H₅)(η‐C₅H₄COCH₃)] (1) with (2‐isopropyl‐5‐methylphenoxy) acetic acid hydrazide [CH₃C₆H₃CH(CH₃)₂OCH₂CONHNH₂] (2) in refluxing ethanol gives the stable light‐orange–brown Schiff base 1‐[(2‐isopropyl‐5‐methylphenoxy)hydrazono] ethyl ferrocene, [CH₃C₆H₃CH(CH₃)₂OCH₂CONHN?C(CH₃)Fe(η‐C₅H₅)(η‐C₅H₄)] (3). Complex 3 has been characterized by elemental analysis, IR, ¹H NMR and single crystal X‐ray diffraction study. It crystallizes in the monoclinic space group P2₁/n, with a = 9.6965(15), b = 7.4991(12), c = 29.698(7) Å, β = 99.010(13) °, V = 2132.8(7) ų, D_calc = 1.346 Mg m^?3; absorption coefficient, 0.729 mm^?1. The crystal structure clearly shows the characteristic [N? H···O] hydrogen bonding between the two adjacent molecules of 3. This acts as a bidentale ligand, which, on treatment with [Ru(CO)₂Cl₂] _n, gives a stable bimetallic yellow–orange complex (4). Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis,Crystal Structure,Photophysical and Electrochemical Properties of rac‐6,13‐Dihydro‐6,13‐methanopentacene

The title compound, rac‐6,13‐dihydro‐6,13‐methanopentacene ( 1 ), has been synthesized and characterized by elemental analysis, FT‐IR, ¹H NMR, UV‐Vis, HRMS spectra, cyclic voltammetry and single‐crystal X‐ray diffraction. The crystal belongs to orthorhombic, space group P2₁2₁2₁, with Z = 4 and cell dimensions a = 6.0185(4), b = 8.1914(6), c = 31.4080(19) Å. In the crystal structure, two types of intermolecular C–H···π hydrogen bonds are observed, and further stabilize the crystal structure. Its photophysical and electrochemical properties and complementary density functional theory (DFT) calculations are reported.     

An experimental and theoretical approach to the molecular structure of 3‐{[4‐(3‐Methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐hydrazono}‐1,3‐dihydro‐ indol‐2‐one

The title molecule, 3‐{[4‐(3‐methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐hydrazono}‐1,3‐dihydro‐indol‐2‐one (C₂₂H₂₀N₄O₁S₁), was prepared and characterized by ¹H NMR, ¹³C NMR, IR, UV–visible, and single‐crystal X‐ray diffraction. The compound crystallizes in the monoclinic space group P21 with a = 8.3401(5), b = 5.6976(3), c = 20.8155(14) Å, and β = 95.144(5)°. Molecular geometry from X‐ray experiment and vibrational frequencies of the title compound in the ground state has been calculated using the Hartree–Fock with 6‐31G(d, p) and density functional method (B3LYP) with 6‐31G(d, p) and 6‐311G(d, p) basis sets, and compared with the experimental data. The calculated results show that optimized geometries can well reproduce the crystal structural parameters, and the theoretical vibrational frequencies values show good agreement with experimental data. Density functional theory calculations of the title compound and thermodynamic properties were performed at B3LYP/6‐31G(d, p) level of theory. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Use of Neodymium Diiodide in the Synthesis of Organosilicon, ‐Germanium and ‐Tin Compounds

The reactivity of neodymium diiodide, NdI₂ ( 1 ), towards organosilicon, ‐germanium and ‐tin halides has been investigated. Compound 1 readily reacts with Me₃SiCl in DME to give trimethylsilane (6 %), hexamethyldisilane (4 %) and (Me₃Si)₂O (19 %). The reaction with Et₃SiBr in THF results in formation of Et₃SiSiEt₃ (17 %) and Et₃SiOBuⁿ (34 %). Alkylation of Me₃SiCl with PrⁿCl in the presence of 1 in THF affords Me₃SiPrⁿ (10 %), Me₃SiOBuⁿ (52 %) and Me₃SiSiMe₃ (1 %). The main product identified in the reaction mixture formed upon interaction of 1 with dichlorodimethylsilane Me₂SiCl₂ in THF is di‐n‐butoxydimethylsilane Me₂Si(OBuⁿ)₂ (54 %) together with minor amounts of Me₂Si(OBuⁿ)Cl. The reaction of 1 with Me₃GeBr under the same conditions produces Me₃GeGeMe₃ (44 %), Me₃GeH (3 %), and Me₃GeI (7 %). An analogous set of products was obtained in the reaction with Et₃GeBr. Treatment of trimethyltin chloride with 1 causes reduction of the former to tin metal (74 %). Me₃SnH (7 %) and hexamethyldistannane (11 %) were identified in the volatile products. The reaction of 1 with Me₃SiI provides straightforward access to hepta‐coordinated NdI₃(THF)₄ ( 2 ), the structure of which was determined by X‐ray diffraction.     

Stable N‐Heterocyclic Germylenes of the Type [Fe{(η5‐C5H4)NR}2Ge] and Their Oxidation Reactions with Sulfur,Selenium, and Diphenyl Diselenide

Three new N‐heterocyclic germylenes of the type [Fe{(η⁵‐C₅H₄)NR}₂Ge] ( 1R Ge) containing particularly bulky alkyl [R = 2‐adamantyl (Ad), 1,1,2,2‐tetramethylpropyl (Pr*)] or aryl substituents [R = 2,6‐diisopropylphenyl (Dipp)] were prepared and structurally characterized, in two cases (R = Ad, Dipp), by single‐crystal X‐ray diffraction. Together with the previously described homologues with R = trimethylsilyl (TMS), tert‐butyl (tBu), and mesityl (Mes) their oxidative addition reactions with S₈ and Se₈ were studied, which afforded compounds of the type [ 1R Ge(μ‐E)]₂ (E = S, Se). The low solubility of most of these products severely hampered their purification and characterization. Nevertheless, their structural characterization by single‐crystal X‐ray diffraction was possible in six cases (E = S, R = Ad, Pr*; E = Se, R = Ad, Pr*, Mes, Dipp). No solubility problems were encountered in oxidative addition reactions with diphenyl diselenide, affording products of the type 1R Ge(SePh₂)₂, whose crystal structures could be determined in four cases (R = TMS, tBu, Mes, Dipp). Short intramolecular CH ··· Se contacts compatible with hydrogen bonds were observed for [ 1Ad Ge(μ‐Se)]₂, [ 1Pr* Ge(μ‐Se)]₂, and 1tBu Ge(SePh₂)₂.     

Synthesis and Structures of Two Isomeric 4‐Diazo‐2,3,4,5‐tetrahydrofuran‐3‐ones

The two regioisomeric 4‐diazo‐2,3,4,5‐tetrahydrofuran‐3‐ones 6 and 7 were prepared via the common intermediate 2,3,4,5‐tetrahydro‐2,2‐dimethyl‐5,5‐diphenylfuran‐3‐one ( 8 ). Diazo transfer with 2,4,6‐triisopropylbenzenesulfonyl azide yielded 6 , whereas 7 was obtained via oxidation of the monohydrazone 12 , which was prepared selectively from tetrahydrofuran‐3,4‐dione 11 . The crystal structures of 6 and 7 have been established by X‐ray crystallography.