Seismic performance of steel reinforced ultra high-strength concrete composite frame joints

To investigate the seismic performance of a composite frame comprised of steel reinforced ultra high-strength concrete (SRUHSC) columns and steel reinforced concrete (SRC) beams, six interior frame joint specimens were designed and tested under low cyclically lateral load. The effects of the axial load ratio and volumetric stirrup ratio were studied on the characteristics of the frame joint performance including crack pattern, failure mode, ductility, energy dissipation capacity, strength degradation and rigidity degradation. It was found that all joint specimens behaved in a ductile manner with flexural-shear failure in the joint core region while plastic hinges appeared at the beam ends. The ductility and energy absorption capacity of joints increased as the axial load ratio decreased and the volumetric stirrup ratio increased. The displacement ductility coefficient and equivalent damping coefficient of the joints fell between the corresponding coefficients of the steel reinforced concrete (SRC) frame joint and RC frame joint. The axial load ratio and volumetric stirrup ratio have less influence on the strength degradation and more influence on the stiffness degradation. The stiffness of the joint degrades more significantly for a low volumetric stirrup ratio and high axial load ratio. The characteristics obtained from the SRUHSC composite frame joint specimens with better seismic performance may be a useful reference in future engineering applications.     

高强钢筋混凝土短肢剪力墙抗震性能试验研究

通过对采用高强钢筋的6片T形混凝土短肢剪力墙和采用高强钢筋高强混凝土的6片L形短肢剪力墙进行低周往复加载试验,研究了T形和L形的破坏形态与性能差异,分析了高厚比、轴压比、配箍间距等参数对构件破坏形态、滞回耗能、骨架曲线、延性及耗能等抗震性能的影响,对比分析了构件与普通短肢剪力墙的抗震性能差异。试验结果表明:采用腹板端部箍筋加密的方式可减轻构件端部的损伤和降低正负向加载时承载力和延性的不对称性;T形构件中高厚比为5的试件表现为弯曲破坏,其他构件表现为弯剪破坏;试验中高厚比小的构件相对于高厚比大的试件延性耗能更好,轴压比增大,构件承载力提高但延性降低;与普通短肢剪力墙相比,T形短肢剪力墙承载力和变形能力提高,耗能增加,L形短肢剪力墙承载力提高较大,极限位移增大,构件后期变形能力略有降低,但可以满足抗震性能要求。     

T形配钢钢骨混凝土柱抗震性能数值分析

为研究非对称配钢钢骨混凝土柱的抗震性能,基于12根T形配钢钢骨混凝土柱的拟静力试验研究进行非线性数值模拟,了解其破坏机制、承载力、延性及耗能能力,探讨轴压比、配钢率、剪跨比对抗震性能的影响。结果表明,低周反复荷载作用下T形配钢钢骨混凝土柱滞回曲线饱满,具有良好的延性和耗能能力。在峰值荷载前,数值模拟结果与试验结果吻合较好。轴压力在一定范围内提高了试件承载力,但降低了延性;增大配钢率能提高试件的承载力、刚度和延性,使得峰值荷载后试件的性能退化趋于平缓;剪跨比对试件破坏形态有显著影响,随剪跨比的增大试件延性性能提高。     

钢桁架(ST)约束混凝土组合柱抗震性能研究

目前,组合柱在建筑结构中进行了广泛应用和研究,研究表明:截面形式对组合柱的抗震性能有很大影响。首先,对钢桁架(ST)约束混凝土组合柱进行了试验研究。并在此基础上,利用有限元软件ABAQUS建立了数值分析模型;其次,基于数值分析模型,分析了组合柱中各部件的应力应变状态,分别考察了轴压比、缀板排列方式、体积配箍率、角钢肢宽与肢厚等因素对柱抗震性能的影响;最后,给出了组合柱在不同抗震等级下轴压比限值的建议值,可为后续组合柱的研究提供参考。研究表明:随着轴压比的增大,组合柱的延性变差,承载力先增大后减小;合理的缀板排列方式可有效抑制角钢的局部屈曲;随着体积配箍率的增大,组合柱的承载力有一定提升,延性提高较为显著;随着角钢肢宽和肢厚的增加,组合柱的承载力和延性均有显著提升。     

免拆超高性能混凝土模板钢筋混凝土柱抗震性能研究

为研究预制超高性能混凝土(UHPC)模板钢筋混凝土(RC)柱的抗震性能,并验证预制UHPC模板在往复荷载作用下是否发生剥离,考虑轴压比、剪跨比、箍筋间距和保护层厚度,设计制作6根免拆模板柱(PTC)和1根RC对比柱试件,对其进行拟静力试验,研究其破坏形态、滞回性能、变形和耗能能力以及强度和刚度退化规律等。结果表明,与加载方向垂直的预制UHPC模板大约在PTC试件峰值荷载的70%时发生剥离,与加载方向平行的预制UHPC模板在试件最终破坏时剥离;在剪跨比、轴压比和箍筋数量均分别相同的条件下,由UHPC模板加10 mm混凝土作为保护层的试件,其抗震性能相对较好,但其承载力和前期刚度略有减小。     

高轴压比下圆钢管钢渣混凝土柱抗震性能试验研究

通过2根圆钢管普通混凝土柱与5根圆钢管钢渣混凝土柱在高轴压比下的水平低周反复加载试验,研究圆钢管钢渣混凝土柱的轴压比、钢管壁厚、钢渣砂替代率和长细比对其破坏形态、滞回耗能能力、骨架曲线、延性及耗能、刚度退化的影响规律。研究结果表明:钢渣混凝土试件破坏过程和破坏形态与普通混凝土试件基本相同,主要表现为钢管底部鼓曲的压弯破坏;所有试件滞回曲线饱满,无明显“捏缩”现象;高轴压比试件存在明显承载力突降现象,合理的径厚比（钢管直径/钢管壁厚）对高轴压比试件承载力突降有明显改善作用;低轴压比试件延性系数大于4.0,高轴压比试件延性系数介于1.57～3.76之间,轴压比增大,试件延性下降;试件破坏时等效粘滞阻尼系数ξ_eq介于0.259～0.437之间;建议采用《钢管混凝土混合结构技术标准》（GB/T51446－2021）或《钢管混凝土结构技术规程》（DBJ/T13－51－2010）计算地震作用下钢管钢渣混凝土柱压弯承载力,但高轴压比钢管钢渣混凝土柱计算结果需乘以折减系数0.8。     

Experimental study on seismic behavior of circular RC columns strengthened with pre-stressed FRP strips

Bonding fiber reinforced polymer （FRP） has been commonly used to improve the seismic behavior of circular reinforced concrete （RC） columns in engineering practice. However, FRP jackets have a significant stress hysteresis effect in this strengthening method, and pre-tensioning the FRP can overcome this problem. This paper presents test results of 25 circular RC columns strengthened with pre-stressed FRP strips under low cyclic loading. The pre-stressing of the FRP strips, types of FRP strips and longitudinal reinforcement, axial load ratio, pre-damage degree and surface treatments of the specimens are considered as the primary factors in the tests. According to the failure modes and hysteresis curves of the specimens, these factors are analyzed to investigate their effect on bearing capacity, ductility, hysteretic behavior, energy dissipation capacity and other important seismic behaviors. The results show that the initial lateral confined stress provided by pre-stressed FRP strips can effectively inhibit the emergence and development of diagonal shear cracks, and change the failure modes of specimens from brittle shear failure to bending or bending-shear failure with better ductility. As a result, the bearing capacity, ductility, energy dissipation capacity and deformation capacity of the strengthened specimens are all significantly improved.     

内约束方钢管混凝土柱抗震性能研究

由于方钢管对混凝土约束作用较弱,地震作用下方钢管混凝土柱底部钢管易出现屈曲,因此本文提出一种新型内约束方钢管混凝土柱。基于ABAQUS有限元软件,本文采用合理的材料本构模型建立内约束方钢管混凝土柱三维实体精细有限元模型,该模型能准确反应钢管、混凝土以及拉筋之间的相互作用,又能反应拟静力作用下混凝土的塑性损伤和钢材的循环硬化规律。有限元结果与试验结果吻合良好。首先,在此基础上笔选出最佳内约束形式,对拉箍筋方钢管混凝土柱的抗震性能明显优于圆环箍筋;其次,提出在不同轴压比下内约束方钢管混凝土柱的焊接拉筋最佳布置长度和合理体积配箍率;再次,探讨不同参数对内约束方钢管混凝土柱滞回性能的影响,结果表明:提高截面含钢率和长细比能有效改善组合柱的极限承载力,而轴压比在一定范围内有利于能提高柱的承载力;最后,讨论了约束措施对内约束方钢管混凝土柱耗能性能的影响。     

钢板混凝土联肢剪力墙抗震性能试验研究

以轴压比和钢连梁弯剪比为主要参数,设计并制作了3个1/4缩尺的钢板混凝土联肢剪力墙子结构,对试件施加恒定轴压力和水平往复加载.观察了各试件破坏特征,对比了顶层水平荷载-侧移曲线和骨架曲线以及延性系数和等效黏滞阻尼系数等抗震性能指标.结果表明:高轴压比会使整个试件的延性变差;弯剪比越大试件耗能能力越好,弯剪比越小试件刚度...     

锈蚀钢筋混凝土圆柱抗震性能的试验研究

对不同锈蚀程度的钢筋混凝土圆柱进行低周反复试验,研究了不同轴压比下的钢筋锈蚀率对钢筋混凝土圆柱滞回曲线、骨架曲线、刚度、延性及耗能能力的影响;给出了试件累积耗能、屈服荷载、极限荷载、荷载最大值和位移延性系数与钢筋锈蚀率和轴压比的关系。研究表明,随着钢筋锈蚀率和轴压比的增大,试件的滞回曲线趋于干瘪,骨架曲线下降段变陡,试件的刚度、延性和耗能能力减小。     

型钢高强混凝土柱轴压比限值的试验研究

通过20个型钢高强混凝土柱的低周反复加载试验对其受力性能进行了研究，分析了剪跨比、轴压比、配箍率以及混凝土强度对型钢高强混凝土柱延性的影响，提出了不同剪跨比、不同配箍率的型钢高强混凝土柱的轴压比限值。其中，剪跨比大于2．0的型钢高强混凝土柱的轴压比限值由大、小偏心界限破坏时力的平衡条件并结合试验结果确定，而剪跨比小于2．0的型钢高强混凝土柱的轴压比限值则通过与剪跨比大于2．0的型钢高强混凝土柱的延性对比加以确定。     

L形高强钢筋高强混凝土短肢剪力墙抗震性能试验研究

L形短肢剪力墙由于其肢短的特点,已经广泛应用于民用建筑的外围结构。为研究使用高性能材料加强后的新型L形短肢剪力墙的抗震性能,本文基于不同轴压比、高宽比和配箍率,设计制作了六片短肢剪力墙试验模型,对其进行了低周往复荷载试验,根据试验结果,对试件的滞回性能、刚度退化、破坏形态、耗能能力等抗震性能指标进行分析与研究。结果表明:高强材料的使用提高了试件的整体承载能力;在满足最小配箍率的前提下适当增大配箍率有利于提高试件的承载力和延性;轴压比大小是影响试件破坏形态的主要因素,随着轴压比逐渐增大,试件趋于脆性破坏;高厚比大小是影响试件抗震性能的次要因素,其影响程度主要根据工程实际情况来确定,但可以肯定的是,较大高厚比有利于提升墙体的稳定性和承载能力。     

型钢高强混凝土柱抗震性能的试验研究

通过14根型钢高强混凝土柱的低周反复加载试验，得到了型钢高强混凝土柱在压、弯、剪共同作用下的主要破坏形态，并探讨了剪跨比、配箍率、混凝土强度对型钢高强混凝土柱滞回曲线、耗能能力以及延性的影响。试验结果表明，型钢高强混凝土柱具有抵御二次地震作用的能力，其抗震性能优于钢筋混凝土柱。     

Experimental research on the seismic behavior of CSPSWs connected to frame beams

The seismic performance of composite steel plate shear walls (CSPSWs) that consist of a steel plate shear wall (SPSW) with reinforced concrete (RC) panels attached to one or both sides by means of bolts or connectors is experimentally studied. The shear wall is connected to the frame beams but not to the columns. This arrangement restrains the possible out-of-plane buckling of the thin-walled steel plate, thus significantly increasing the bearing capacity and ductility of the overall wall, and prevents the premature overall or local buckling failure of the frame columns. From a practical viewpoint, these solutions can provide open space in a floor as this type of composite shear walls with a relatively small aspect ratio can be placed parallel along a bay. In this study, four CSPSWs and one SPSW were tested and the results showed that both CSPSWs and SPSW possessed good ductility. For SPSW alone, the buckling appeared and resulted in a decrease of bearing capacity and energy dissipation capacity. In addition, welding stiffeners at corners were shown to be an effective way to increase the energy dissipation capacity of CSPSWs.     

CFRP布约束增强高强混凝土柱抗震性能数值分析

采用地震工程开源模拟软件OpenSees（Open System for Earthquake Engineering Simulation）对CFRP（Carbon Fiber Reinforced Polymer,碳纤维增强复合材料）布加固高强钢筋混凝土方柱的抗震性能进行了数值分析。采用Steel02Material和Concrete02Material材料本构模型模拟了CFRP布加固高强混凝土方柱的抗震性能;在此基础上,进一步研究了轴压比和剪跨比这2个因素对试件抗震性能的影响。将所得数值分析结果与相同条件下的试验结果对比后发现：基于Steel02 Material和Concrete02 Material材料本构,利用OpenSees,可以较好地模拟CFRP布加固高强混凝土方柱的抗震性能,并且与试验结果（滞回曲线、骨架曲线、水平承载力和位移延性系数）能够较好地吻合,从而说明该数值分析方法还可以准确地反映出轴压比和剪跨比对高强混凝土柱抗震性能的影响规律。     

钢管混凝土边框高强混凝土组合剪力墙抗震性能试验研究

钢管混凝土边框组合剪力墙是一种新型组合剪力墙。本文进行了2个1/4缩尺的高强混凝土剪力墙模型的低周反复荷载试验,模型1为普通钢筋混凝土剪力墙,模型2为钢管混凝土边框组合剪力墙。在试验研究基础上,对比分析它们的承载力、延性、刚度及其衰减过程、滞回特性、耗能能力及破坏特征,建立了组合剪力墙的承载力计算模型,计算结果与实测结果符合较好。研究表明,钢管混凝土边框高强混凝土组合剪力墙与普通剪力墙相比抗震性能显著提高。     

钢管混凝土桥墩抗震性能试验研究

为研究钢管混凝土桥墩的抗震性能,对钢管混凝土桥墩和钢筋混凝土桥墩进行了拟静力对比试验研究。根据试件的破坏发展过程以及各试件的滞回曲线和骨架曲线,分析了其滞回性能、耗能能力、延性、强度退化及刚度退化等抗震性能。试验结果表明,钢管混凝土桥墩的抗震性能明显好于钢筋混凝土桥墩。在含钢率和轴力相同的情况下,钢管混凝土桥墩的滞回曲线比钢筋混凝土桥墩丰满得多,前者的耗能能力约为后者的4.46倍,钢管混凝土桥墩的延性大于钢筋混凝土桥墩;随着轴压比的增大,钢管混凝土桥墩延性有所下降,强度退化加快,但对其刚度退化的影响不大。     

内置钢板钢筋混凝土组合剪力墙数值模拟

内置钢板钢筋混凝土组合剪力墙具有良好的抗震性能,目前已在超高层建筑中得到越来越多的应用。采用OpenSees程序对普通钢筋混凝土剪力墙和钢板组合剪力墙试验构件进行模拟分析,验证了建模与分析方法的合理性与准确性,分析结果表明,该方法能够较好地模拟组合剪力墙的弹塑性行为。分析了轴压比和配钢率这两个关键参数对内置钢板组合剪力墙抗震性能的影响。计算结果表明,与普通钢筋混凝土剪力墙相比,内置钢板可以明显提高构件的承载力、延性和滞回耗能;轴压比和配钢率对组合剪力墙的抗震性能有较大影响。     

部分预制型钢混凝土梁抗震性能试验研究

为探究部分预制型钢混凝土梁的抗震性能,进行了7个部分预制型钢混凝土梁试件的拟静力试验,研究了试件的裂缝开展过程、破坏形态、承载能力、延性、耗能能力和刚度退化情况,探究预制截面模式、剪跨比和后浇混凝土强度等对其抗震能力的影响。结果表明:地震作用下,该7个试件力学性能较好,剪跨比是影响试件抗震性能的首要要素,剪跨比大的试件耗能能力强,型钢约束部分混凝土可以提高试件的耗能能力,截面模式和后浇混凝土强度对抗震性能影响不大。     

Effect of seismic design details on hysteresis performance of SRC-RC transfer columns

Four types of seismic design details were tested using 11 transfer column specimens and one comparison specimen of RC under low cyclic reversed loading. Test results show that diagonal cracks control the failure pattern and damage occurs mainly in the RC section with weak shear capacity in the transfer columns. There is a large difference in the bearing capacity and ductility of the transfer columns according to the test results, which indicates that the strengthening effect of diverse structural measures is quite different. The section ratio of I-section-encased steel and the axial compression ratio also have a great influence on the bearing capacity and ductility. Although the bearing capacity of transfer columns with additional longitudinal bars and additional X bars is relatively large, they have poor deformation capacity. Setting more stirrups along the columns is the best structural measure to enhance the seismic performance. The studs on the I-sectionencased steel by welding can help to complete the stress transfer between the steel and concrete, and avoid performance degradation of the two materials due to bonding failure.