Preparation of highly filled wood flour/recycled high density polyethylene composites by in situ reactive extrusion

Highly filled wood flour/recycled high density polyethylene (WF/RHDPE) composites were directly prepared by in situ reactive extrusion using a twin‐screw/single‐screw extruder system. The effects of dicumyl peroxide (DCP) content on extrusion pressure, rheological behavior, mechanical properties, fractured surface morphology of the composites, and melting temperature of RHDPE in the composites were investigated. The extrusion pressure and torque of WF/RHDPE composite melt increased with DCP content. Mechanical property tests and scanning electron microscopy analysis results confirmed that the interfacial interaction of the composites was improved by in situ reaction. The composites show lower melting peak temperature (T_m) than RHDPE. The cooling in profile extrusion shortened the crystallization time, resulting in decrease of crystalline order of RHDPE in the composites. There are no noticeable changes of T_m values with increasing DCP content. Comparative study on composites with maleic anhydride grafted polyethylene as compatibilizer demonstrated that mechanochemical treatment with DCP and maleic anhydride was an effective method to improve interfacial adhesion for WF/RHDPE composites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Mechanical and viscoelastic properties of polyethylene-based microfibrillated composites from 100% recycled resources

In this study, recycled polyethylene (rPE) based microfibrillated composites (MFCs) were developed while incorporating recycled poly(ethylene terephthalate) (rPET) and recycled polyamide 6 (rPA) as the reinforcing fibrillar phases at a given weight ratio of 80 wt% (rPE)/20 wt% (rPET or rPA). The blends were first melt processed using a twin-screw extruder. The extrudates were then cold stretched at a drawing ratio of 2.5 to form rPET and rPA fibrillar structures. Next, the pelletized drawn samples were injection molded at the barrel temperatures below the melting temperatures of rPET and rPA. The tensile, three-point bending, impact strength, dynamic thermomechanical, and rheological properties of the fabricated MFCs were analyzed. The effects of injection molding barrel temperature (i.e., 150°C and 190°C) and extrusion melt processing temperature (i.e., 250°C and 275°C) on the generated fibrillar structure and the resultant properties were explored. A strong correlation between the fibrillar morphology and the mechanical properties with the extrusion and injection molding temperatures was observed. Moreover, the ethylene/n-butyl acrylate/glycidyl methacrylate (EnBAGMA) terpolymer and maleic anhydride grafted PE (MAH-g-PE) were, respectively, melt processed with rPE/rPET and rPE/rPA6 blends as compatibilizers. The compatibilizers refined the fibrillar structure and remarkably influenced mechanical properties, specifically the impact strength.     

Effect of hybridization and compatibilization on the mechanical properties of recycled polypropylene‐hemp composites

Hemp fibers and particles, with different sizes and contents, were used to make hybrid composites based on recycled polypropylene (PP). In particular, the effect of maleated polypropylene (MAPP) addition on the morphology and mechanical properties is reported. The results show that better adhesion is obtained with MAPP addition. In general, fiber content and size had a substantial effect on the tensile, flexural, torsion, and impact properties of the resulting composites. Although, adding MAPP to the samples improved the impact strength of the composites, the values were always lower than neat PP. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Impact behavior of sawdust/recycled–PP composites

The instrumented Izod and Charpy tests were performed on the sawdust–polypropylene (PP) composites to study the nature of impact resistance in the thermoplastic wood composites. The notched Izod strength was found to increase with filler content in composites containing the Maleic–anhydride–grafted PP (MAPP) additive. The Izod strength even exceeds that of the neat matrix resin at higher filler contents, indicating a methodology for applying the recycled PP and also for reinforcing the thermoplastics with wood powders. While the static tensile results show evidences for the reinforcing role of the wood filler, a fracture mechanics characterization through the Charpy impact tests effects of MAPP under the impact loading rates. The choice of MAPP as the additive was discussed accordingly for application of the sort of materials. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1420–1428, 2001     

Rheological behavior and mechanical properties of sawdust/polyethylene composites

We have characterized the melt rheological behavior and the solid tensile properties of sawdust/polyethylene composites prepared in an internal mixer. Various concentrations (from 0 to 60 wt %) and three particle sizes have been tested, in presence of a coupling agent (maleic anhydride grafted polyethylene). In the molten state, for each particle size, a mastercurve of the complex viscosity as function of frequency can be plotted, using a shift factor depending on weight fraction. We show that the shift factors can be described by a Krieger‐Dougherty law, leading to a “universal” viscosity law of the Carreau‐Yasuda type. In the solid state, the presence of sawdust increases Young modulus in uniaxial elongation, mainly for small size particles, but reduces dramatically deformation at break and tensile strength. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Mechanical properties and water absorption of low‐density polyethylene/sawdust composites

The mechanical properties and water absorption of low‐density polyethylene/sawdust composites were investigated. The relationship between the filler content and the composite properties was also studied. Different degrees of esterification of the sawdust with maleic anhydride were obtained with different reaction times. The experimental results demonstrated that the treatment of sawdust by maleic anhydride enhanced the tensile and flexural strengths. The water absorption for maleic anhydride treated sawdust indicated that it was more hydrophobic than untreated sawdust. The effects of the addition of benzoyl peroxide during the preparation of composite samples on the water absorption and mechanical properties were also evaluated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Mechanical and open hole tensile properties of self‐reinforced PET composites with recycled PET fiber reinforcement

The tensile strength of notched composites is an important factor for composite structural design. However, no literature is available on the notch sensitivity of self‐reinforced polymer composites. In this study, self‐reinforced recycled poly (ethylene terephthalate) (srrPET) composites were produced by film stacking from fabrics composed of double covered uncommingled yarns (DCUY). Composite specimens were subjected to uniaxial tensile, flexural, and Izod impact tests and the related results compared with earlier ones achieved on srPET composites reinforced with nonrecycled technical PET fibers. Effects of open circular holes on the tensile strength of srrPETs were studied at various width‐to‐hole diameter (W/D) ratios of the specimens. In the open hole tensile (OHT) measurements bilinear (yielding followed by post‐yield hardening) stress–strain curves were recorded. The srrPET composites had extremely high yield strength retention (up to 142%) and high breaking strength retention (up to 81%) due to the superior ductile nature of the srrPETs, which induces plastic yielding near the hole thereby reducing the stress concentration effect. The results proved that srrPET composites are tough, ductile notch‐insensitive materials. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43682.     

Mechanical and thermal properties of polypropylene/recycled polyethylene terephthalate/chopped rice husk composites

The various ratios of recycled polyethylene terephthalate (rPET) into polypropylene (PP) filled with 40 parts chopped rice husk per hundred part of polymer have been studied. Composites were prepared using a corotating twin screw extruder at temperature zones of 165–215, well below 250°C (rPET mp temperature) and characterized by mechanical and thermal properties. To improve the compatibility between different components, PP grafted with maleic anhydride was added as a coupling agent in all the compositions studied. The results showed that the addition of rPET improved the tensile and flexural modulus and impact strength of the composite while reducing its tensile and flexural strength. The scanning electron microscopy micrographs of samples in the injection direction showed that some particle shaped rPET inside the composites appear as drawn fibrils and some appear as plates. Differential scanning calorimetric studies showed that the addition of rPET particles to the composites decrease the PP crystallization temperatures. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

木粉疏水改性对HDPE基木塑复合材料性能的影响

采用一种操作简便且易于工业推广的方法对木粉进行疏水改性,具体过程为：将3种可热聚合的单体,即甲基丙烯酸甲酯（MMA）、甲基丙烯酸丁酯（BMA）和苯乙烯（St）均匀喷洒在木粉上,经过预热处理后,与配方中其他组分,如高密度聚乙烯（HDPE）和马来酸酐接枝聚乙烯（MAPE）等通过高速混合机混合均匀,采用双螺杆挤出机造粒后,注射制备木塑复合材料（WPC）样条,测试其力学性能。另外,考察了疏水改性对WPC接触角、维卡软化温度、洛氏硬度、吸水性能、热性能的影响规律。结果表明：疏水改性后WPC的接触角增大,木粉和HDPE的界面相容性改善,力学性能得到明显提高。其中,当MMA、BMA和St的添加量为3%时,WPC的力学性能最好,与疏水改性前相比,弯曲强度分别提高了17.3%、26.3%和27.5%,弯曲模量分别提高了24.4%、24.4%和26.0%,冲击强度分别提高了54.7%、57.7%和60.5%。 此外,疏水改性后WPC的维卡软化温度、洛氏硬度、耐水性和耐热性也得到改善。     

Accelerated weathering properties of compatibilized composites made from recycled HDPE and nonmetallic printed circuit board waste

The main aim of this work is to examine the influence of the contents of nonmetallic printed circuit board (PCB) waste component on the photodegradation of recycled high‐density polyethylene (rHDPE) composites. The properties tested were chemical changes, flexural properties, color stability, water absorption, leaching properties, and crystallinity changes of the composites after exposure to 2,000 h of accelerated weathering. Surface degradation for composites with nonmetallic PCB was less compared to unfilled rHDPE mainly because glass fibers covered almost the whole surface of specimens, acting as a protective layer, thus, slowing down the photodegradation reaction. Incorporation of compatibilizer in rHDPE/PCB composites had played an important role in resisting degradation due to UV exposure. All the composite samples became lighter in the early stages of weathering exposure; however, compatibilized composites showed less lightening and reduction on strength and modulus. Carbonyl index increases with exposure time indicating that the oxidation reaction continuously occurred during the aging process. Incorporation of compatibilizer had successfully reduced the water absorption uptake by the composites and effectively delayed some degradation properties of weathering. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43110.     

Mechanical and thermal properties of polypropylene/modified basalt fabric composites

Basalt fabric (BF) was first treated with silane coupling agent KH550, modified basalt fabric (MBF) was obtained. Then MBF were molded with polypropylene (PP) matrix, and polypropylene/modified basalt fabrics (PP/MBF) composites were obtained. The influence of concentration and treating time of KH550 on MBF were characterized by hydrophilicity and lipophilicity. The tensile strength and morphology of basalt fabric were tested by single filament strength tester and scanning electron microscopy. The mechanical properties of composites were measured with electronic universal testing machine and impact testing machine, and the thermal properties were tested by thermogravimetric analysis and dynamic mechanical analysis. The results showed that the lipophilicity of MBF is improved significantly by KH550 while the tensile is nearly damaged. The mechanical properties of composites are larger than that of pure PP, among which the impact property was improved the most, showing 194.12% enhancement. The thermal stability and dynamic viscoelasticity were better than pure PP; furthermore, the concentration of KH550 virtually had no effect on the thermal stability. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42504.     

Effect of Wood Fibers on the Rheological and Mechanical Properties of Polystyrene/Wood Composites

The effects of wood fibers on the rheological and mechanical properties of polystyrene/wood (PS/wood) composites were investigated. The composites with different ratios of PS and wood were prepared by means of internal mixer and, additionally, two different sizes of the wood particles were used, such as ～100 and ～600 µm. The rheological properties were studied using capillary rheometer, apparent shear rate, apparent shear stress, apparent viscosity, power law index, and flow activation energy at a constant shear stress were determined. The rheological results showed that the shear stress–shear rate variations obeyed a power law equation, and the composites exhibited shear thinning. The flow activation energy of the composites increased with the addition of wood particles. Mechanical results showed that stress at break of the composites was higher than that of pure PS, whereas the strain at break and impact strength of the composites were lower than that of PS. In addition, the mechanical properties of the present composites were improved when the small size of wood particles were incorporated.     

Influence of the recycled glass fibers from nonmetals of waste printed circuit boards on properties and reinforcing mechanism of polypropylene composites

The feasibility of reusing the recycled glass fibers (RGF) from nonmetals of waste printed circuit boards in polypropylene (PP) composites is studied by mechanical properties, vicat softening temperature and heat distortion temperature. The influence of RGF on reinforcing mechanism of the composites is watched under scanning electron microscopy (SEM) in situ tensile test. The results show that the mechanical and thermal properties of the RGF/PP composites can be significantly improved by adding the RGF into PP. In situ SEM observation results show that the RGF are the excellent supporting bodies and can effectively lead to mass microcracks. Crack initiation, propagation, and fiber breakage dissipate tremendous energy. Therefore, the mechanical properties are reinforced. All the above results indicate that the reuse of RGF in the PP composites represents a promising way for closing the recycling loop and realizing the high added value utilization. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of moisture content on mechanical properties,thermal and structural stability and extrudate texture of poly(vinyl chloride)/wood sawdust composites

Mechanical properties and thermal and structural changes of poly(vinyl chloride) (PVC)/wood sawdust composites were assessed with respect to the effect of moisture content, varying from 0.33 to 3.00 % by weight in the composite, for three different wood sawdust contents. The swell ratio and texture characteristics of the composite extrudates were also evaluated. Unique explanations were given to describe changes in the composite properties in terms of molecular interactions between PVC, cellulosic sawdust and moisture, such as dipole–dipole interactions, interfacial defects and bonding, fibre swelling, and moisture evaporation. The results suggest that at low moisture content the tensile modulus decreased and elongation at break of the composites increased with moisture content, the effect being reversed for high moisture content. Tensile strength decreased with increasing moisture content up to 1–2 %, and then unexpectedly increased at higher moisture contents. The effect of moisture content on flexural properties of the composite was similar to that on tensile properties. Impact strength of the composites was considerably improved with moisture content at low sawdust contents (16.7 wt%), and was independent of the moisture content at higher sawdust contents (28.6 and 37.5 wt%). A decrease in decomposition temperature with an increase in polyene content was evidenced with increasing moisture content, while the glass transition temperature did not change with varying moisture content. The extrudate swell ratio increased with the shear rate but remained unaffected by moisture content. The bubbling and peeling‐off in the composite extrudate occurred as a result of the evaporation of water molecules and the application of a high shear rate. Copyright © 2004 Society of Chemical Industry     

Mechanical properties and morphology of impact modified polypropylene–wood flour composites

The mechanical properties and morphology of polypropylene/wood flour (PP/WF) composites with different impact modifiers and maleated polypropylene (MAPP) as a compatibilizer have been studied. Two different ethylene/propylene/diene terpolymers (EPDM) and one maleated styrene–ethylene/butylene–styrene triblock copolymer (SEBS–MA) have been used as impact modifiers in the PP/WF systems. All three elastomers increased the impact strength of the PP/WF composites but the addition of maleated EPDM and SEBS gave the greatest improvements in impact strength. Addition of MAPP did not affect the impact properties of the composites but had a positive effect on the composite unnotched impact strength when used together with elastomers. Tensile tests showed that MAPP had a negative effect on the elongation at break and a positive effect on tensile strength. The impact modifiers were found to decrease the stiffness of the composites. Scanning electron microscopy showed that maleated EPDM and SEBS had a stronger affinity for the wood surfaces than did the unmodified EPDM. The maleated elastomers are, therefore, expected to form a flexible interphase around the wood particles giving the composites better impact strength. MAPP further enhanced adhesion between WF and impact-modified PP systems. EPDM and EPDM–MA rubber domains were homogeneously dispersed in the PP matrix, the diameter of domains being between 0.1–1 μm. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67:1503–1513, 1998     

Impact of hybrid flame retardant on the flammability and thermomechanical properties of wood sawdust polymer composite panel

Wood‐based polymer composites represent a growing interest in the building industry. The fire response of this composite type is a concern to many end users. This study utilizes wood sawdust as reinforcement to develop flame retarded wood sawdust polyester composite (WSPC) panel. Flame retardant (FR) chemicals such as aluminium tri‐hydroxide (ATH), intumescent FR (ammonium polyphosphate [APP] Gum Arabic Powder [GAP]), and the combination of ATH and APP‐GAP (hybrid) at 0%, 12%, and 18% were used to modify the WSPC panel using hand lay‐up compression moulding technique. Tensile and flexural properties, thermal and flammability properties, and macroscopic image observations (MIOs) were examined using universal testing machine, thermogravimetric analysis (TGA/DSC), and the cone calorimeter apparatus (CCA), respectively. The results obtained show that the added nonhybrid FR in the WSPC panel enhanced the tensile and flexural strength while a reduction in the tensile modulus was observed. In the thermal stability, TGA analysis reveals that the added hybrid FR did not exhibit significant change in the thermal stability of the WSPC panel while cone calorimeter results show significant improvement in some fire properties. It can be concluded that the hybrid FR when incorporated in WSPC panel can be of great benefit to the building industry.     

PPS/recycled PEEK/ carbon nanotube composites: Structure,properties and compatibility

Blends of poly(phenylene sulfide) (PPS) and recycled poly(ether ether ketone) (r‐PEEK) were prepared using a twin‐screw extruder. The carbon nanotube (CNT) added to the blends not only improved the compatibility of the two polymers, but also affected the morphology of the immiscible PPS/r‐PEEK blends. R‐PEEK always forms the dispersed phase and PPS the continuous phase in such blends. In the composite, CNT particles were observed in the PPS phase, mostly distributes in the interface between PPS and PEEK. The results show that r‐PEEK improves the impact and tensile strength of PPS, but does not provide nucleation effect on PPS. However, CNT improved the flexural modulus of PPS/r‐PEEK blends and promoted the crystallization of r‐PEEK rather than that of PPS. The prepared PPS/r‐PEEK blends provided larger electrical conductivity than neat polymers. Adding 20 wt % CNT to blend resulted in composite with the minimum volume resistivity, a reduction of four orders of magnitude, compared with that of the neat blend. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42497.     

Mechanical properties of biorenewable fiber/plastic composites

Plastic fiber composites, consisting of polypropylene (PP) or polyethylene (PE), and pinewood, big blue stem (BBS), soybean hulls, or distillers dried grain and solubles (DDGS), were prepared by extrusion. Young's modulus, tensile and flexural strengths, melt flow, shrinkage, and impact energy, with respect to the type, amount, and size of fiber on composites, were evaluated. Young's moduli under tensile load of wood, BBS, and soybean‐hull fiber composites, compared with those of pure plastic controls, were either comparable or higher. Tensile strength significantly decreased for all the PP/fiber composites when compared with that of the control. Strength of BBS fiber composites was higher than or comparable to that of wood. When natural fibers were added there was a significant decrease in the melt flow index for both plastic/fiber composites. There was no significant difference in the shrinkage of all fiber/plastic composites compared to that of controls. BBS/PE plastic composites resulted in higher notched impact strength than that of wood or soybean‐hull fiber composites. There was significant reduction in the unnotched impact strength compared to that of controls. BBS has the potential to be used as reinforcing materials for low‐cost composites. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2484–2493, 2004     

Mechanical and dynamical mechanical properties of chloroprene rubber and cellulose II composites

Vulcanized composites of chloroprene rubber (CR) with cellulose II (Cel II) as a filler were investigated. Cel II, obtained by the coagulation of cellulose xanthate, was incorporated in the rubber by the traditional method. The filler content varied from 0 to 30 phr. For comparison purposes, carbon black (CB)–CR composites were also studied. The CB amount varied from 0 to 45 phr. The mechanical and dynamic mechanical properties were determined, and the CR composite containing 20 phr of Cel II showed the best set of properties. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2425–2430, 2004