Preparation and electrochemical properties of nanorods and nanosheets structural Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> as anode for lithium ion batteries

In this study, nanorods and nanosheets structure of Li₄Ti₅O₁₂ (LTO) with higher capacity and cycle performance are prepared by hydrothermal synthesis. We can obtain different nanostructural LTO by changing heating time in autoclave and molar ratio between lithium (Li) and titanium (Ti). Precursor was calcined at 600 °C for 6 h in air after heating to 180 °C with the holding time of 12 and 24 h in Teflon-lined PTFE autoclave vessel, nanorods and nanosheets structure of LTO were prepared successfully, respectively. Specially, when the molar ratio between Li and Ti was 4.2:5, the discharge capacities were 177.7 and 230.7 mAh g^?1 at 20 mA g^?1, respectively. When the holding time was 24 h as well as molar ratio between Li and Ti was 4.2:5, the band gap was least, and this pure LTO reversible capacities reached 90.36 and 73.12% after 200 and 3000 cycles at 100 mA g^?1 and 1 A g^?1, respectively.     

Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles embedded in 3D reduced graphene oxide network as anode for high-performance lithium ion batteries

Mn₃O₄ nanoparticles were in-situ synthesized in the 3D framework of reduced graphene oxide (RGO) by a facile one-step hydrothermal method. In the reduced graphene-Mn₃O₄ (RGM) composite, the RGO network not only serves as a mechanical support to construct a self-supported and binder-free electrode, but also offers 3D continuous conductive network for effective electron transfer. The Mn₃O₄ nanoparticles anchored uniformly across the RGO framework, which provided high capacity and prevented the restacking of the RGO thin sheets. Based on the unique composite structures, strong synergistic effect was achieved between Mn₃O₄ and RGO, resulting in superior specific capacity, enhanced rate capability, stable cycling performance and nearly 100% Coulombic efficiency in the RGM2 composites. With an optimal Mn₃O₄ composition of 44% by weight (similarly hereinafter), the composite exhibits high specific capacities of 696–795 mAh g¹ based on the overall weight of the electrode in 60 cycles at 200 mA g^?1, with a large coulombic efficiency of around 98%. Even at a high current density of 10,000 mA g^?1, the composite can still deliver a capacity of 383 mAh g^?1, demonstrating its excellent rate performance. The outstanding performances of the composites are attributed to the synergistic effect of both components and the hierarchical structure of the composite.     

Thermodynamic properties of SrAl<Subscript>12</Subscript>O<Subscript>19</Subscript> and SrAl<Subscript>4</Subscript>O<Subscript>7</Subscript>

Strontium aluminates are important compounds with interesting properties such as long-duration phosphorescence and elastico-deformation luminescence. They have potential application in flexible light emitting panels. Since there are serious discrepancies in available thermodynamic data for these compounds, a redetermination of their Gibbs energies of formation was undertaken using solid-state electrochemical cells incorporating single-crystal SrF₂ as the electrolyte in the temperature range from 1000 to 1300 K. However, the measurements were restricted to SrAl₁₂O₁₉ and SrAl₄O₇ because of the formation of strontium oxyfluoride phase between SrAl₂O₄ and SrF₂. For the reactions, SrO + 6 Al₂O₃ → SrAl₁₂O₁₉, ΔG ^o/J mol^?1 (± 280) = ?83386 ? 25.744 (T/K), and SrO + 2Al₂O₃ → SrAl₄O₇, ΔG ^o/J mol^?1 (± 240) = ?80187 ? 25.376 (T/K). The high entropy of SrAl₄O₇ and SrAl₁₂O₁₉ can be partly related to their complex structures. The results of this study are consistent with calorimetric data on enthalpy of formation of other Sr-rich aluminates and indicate only marginal stability for SrAl₄O₇ relative to its neighbours, SrAl₁₂O₁₉ and SrAl₂O₄. The thermodynamic data explain the difficulty in direct synthesis of phase pure SrAl₄O₇ and the formation of SrAl₂O₄ as the initial ternary phase when reacting SrO and Al₂O₃ or crystallizing from amorphous state, irrespective of composition.     

Photochemical properties of SnO<Subscript>2</Subscript> nanorods arrays grown on nanoporous stainless steel

The synthesis and characterization of SnO₂ nanomaterials have been extensively studied as photoelectrodes for the potential applications in optoelectronic devices. In this work, SnO₂ nanorods arrays have been synthesized by hydrothermal method on the nanoporous surface of the anodized stainless steel. The prepared SnO₂ nanorods of 1.3–1.4 µm in length and 250–350 nm in width, were uniformly distributed on the anodized stainless steel. This one-dimensional SnO₂ nanostructure directly fabricated on the substrate provides an electron transfer pathway and a Schottky-type contact, resulting in improved photocatalytic and photoelectrochemical performance. The SnO₂ nanorods arrays exhibit fast response towards H₂O₂ determination, producing a linear range from 100 to 3000 μM with a correlation coefficient of 0.984 and a sensitivity of 0.66 μA cm^?2 mM^?1. The results indicate the potential applications of SnO₂ nanorods arrays as the non-enzymatic H₂O₂ sensor.     

Samarium-doped Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles with improved magnetic and supercapacitive performance: a novel preparation strategy and characterization

Sm³⁺-doped magnetite (Fe₃O₄) nanoparticles were synthesized through a one-pot facile electrochemical method. In this method, products were electrodeposited on a stainless steel (316L) cathode from an additive-free 0.005 M Fe(NO₃)₃/FeCl₂/SmCl₃ aqueous electrolyte. The structural characterizations through X-ray diffraction, field-emission electron microscopy, and energy-dispersive X-ray indicated that the deposited material has Sm³⁺-doped magnetite particles with average size of 20 nm. Magnetic analysis by VSM revealed the superparamagnetic nature of the prepared nanoparticles (Ms = 41.89 emu g^?1, Mr = 0.12 emu g^?1, and H _Ci = 2.24 G). The supercapacitive capability evaluation of the prepared magnetite nanoparticles through cyclic voltammetry and galvanostat charge–discharge showed that these materials are capable to deliver specific capacitances as high as 207 F g^?1 (at 0.5 A g^?1) and 145 F g^?1 (at 2 A g^?1), and capacity retentions of 94.5 and 84.6% after 2000 cycling at 0.5 and 1 A g^?1, respectively. The results proved the suitability of the electrosynthesized nanoparticles for use in supercapacitors. Furthermore, this work provides a facile electrochemical route for the synthesis of lanthanide-doped magnetite nanoparticles.     

General strategy for embedding high quality Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> quantum dots and ZnS:Mn<Superscript>2+</Superscript> quantum dots in a silica matrix

In this paper, ZnS:Mn²⁺ quantum dots (QDs) Fe₃O₄ quantum dots (QDs)/SiO₂ nanocomposites were successfully synthesized by reverse microemulsion method. The average diameter of ZnS:Mn²⁺ QDs, Fe₃O₄ QDs and ZnS:Mn²⁺ QDs Fe₃O₄ QDs/SiO₂ nanocomposites was about 5.8, 9 and 29 nm, respectively. As the mass ratio of ZnS:Mn²⁺ to Fe₃O₄ QDs increased from 2.5:4 to 7.5:4, the intensity of the yellow–orange emission coming from Mn²⁺ ions was increased. The superparamagnetic property of ZnS:Mn²⁺ QDs Fe₃O₄ QDs/SiO₂ nanocomposites was observed at room temperature, and the saturation magnetization was decreased as the amount of ZnS:Mn²⁺ QDs increased.     

Nano-domain structure of Li<Subscript>4</Subscript>Mn<Subscript>5</Subscript>O<Subscript>12</Subscript> spinel

XRD-pure Li₄Mn₅O₁₂ spinels are obtained below 600 °C from oxalate and acetate precursors. The morphology consists of nanometric particles (about 25 nm) with a narrow particle size distribution. HRTEM and electron paramagnetic resonance (EPR) spectroscopy of Mn⁴⁺ are employed for local structure analysis. The HRTEM images recorded on nano-domains in Li₄Mn₅O₁₂ reveal its complex structure. HRTEM shows one-dimensional structure images, which are compatible with the (111) plane of the cubic spinel structure and the (001) plane of monoclinic Li₂MnO₃. For Li₄Mn₅O₁₂ compositions annealed between 400 and 800 °C, EPR spectroscopy shows the appearance of two types of Mn⁴⁺ ions having different metal environments: (i) Mn⁴⁺ ions surrounded by Li⁺ and Mn⁴⁺ and (ii) Mn⁴⁺ ions in Mn⁴⁺-rich environment. The composition of the Li⁺, Mn⁴⁺-shell around Mn⁴⁺ mimics the local environment of Mn⁴⁺ in monoclinic Li₂MnO₃, while the Mn⁴⁺-rich environment is related with that of the spinel phase. The structure of XRD-pure Li₄Mn₅O₁₂ comprises nano-domains with a Li₂MnO₃-like and a Li_4/3−x Mn_5/3+x O₄ composition rather than a single spinel phase with Li in tetrahedral and Li_1/3Mn_5/3 in octahedral spinel sites. The annealing of Li₄Mn₅O₁₂ at temperature higher than 600 °C leads to its decomposition into monoclinic Li₂MnO₃ and spinel Li_4/3−x Mn_5/3+x O₄.     

Enhanced electrochemical reduction of hydrogen peroxide by Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanowire electrode

Crystalline Co₃O₄ nanowire arrays with different morphologies grown on Ni foam were investigated by varying the reaction temperature, the concentration of precursors, and reaction time. The Co₃O₄ nanowires synthesized under typical reaction condition had a diameter range of approximately 500–900 nm with a length of 17 µm. Electrochemical reduction of hydrogen peroxide (H₂O₂) of the optimized Co₃O₄ nanowire electrode was studied by cyclic voltammetry. A high current density of 101.8 mA cm^?2 was obtained at ?0.4 V in a solution of 0.4 M H₂O₂ and 3.0 M NaOH at room temperature compared to 85.8 mA cm^?2 at ?0.35 V of the Co₃O₄ nanoparticle electrode. Results clearly indicated that the Ni foam supported Co₃O₄ nanowire electrode exhibited superior catalytic activity and mass transport kinetics for H₂O₂ electrochemical reduction.     

Removal and reuse of Ag nanoparticles by magnetic polyaniline/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanofibers

For the treatment of wastewater containing Ag nanoparticles (NPs), PANI/Fe₃O₄ nanofibers were firstly prepared by a novel self-assemble. And then, the efficiency for the removal of Ag NPs from wastewater was investigated. The magnetic performance of PANI/Fe₃O₄ nanofibers could be optimized by adjusting the pH of the self-assemblied system. Under pH of 3, the as-prepared nanofibers exhibited the highest magnetism and also displayed good efficiency (>?12 mg g^?1) for the removal of Ag NPs. Importantly, the resulted product (PANI/Fe₃O₄/Ag composite) could act as a catalysis for cleaning durable pollutant, 4-nitrophenol. After 10 cycles, only slight decrease in rate constant was found, indicating excellent reusability. Those approaches provide a new way to merge the recovery of Ag NPs as pollutants and reuse of recovered Ag NPs as recyclable material for environmental remediation.     

Microwave dielectric properties of Bi(Sc<Subscript>1/3</Subscript>Mo<Subscript>2/3</Subscript>)O<Subscript>4</Subscript> ceramics for LTCC applications

A novel microwave dielectric ceramics Bi(Sc_1/3Mo_2/3)O₄ with low firing temperature were prepared via the solid reaction method. The specimens have been characterized using scanning electron microscopy, X-ray diffraction, Raman spectroscopy and DC conductivity. The Bi(Sc_1/3Mo_2/3)O₄ ceramics showed B-site ordered Scheelite-type structure with space group C2/c. Raman analysis indicated that prominent bands were attributed to the normal modes of vibration of MoO₄ ^2? tetrahedra. The dielectric loss of Bi(Sc_1/3Mo_2/3)O₄ ceramics can be depended strongly the bulk conductivity by DC measurement. The superior microwave dielectric properties are achieved in the Bi(Sc_1/3Mo_2/3)O₄ ceramic sintered at 875 °C/4 h, with dielectric constant?~?25, Q?×?f ~?51,716 GHz at 6.4522 GHz and temperature coefficient of resonance frequency ~???70.4 ppm/°C. It is a promising microwave dielectric material for low-temperature co-fired ceramics technology.     

Hydrothermal synthesis of Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript> nanorods and its growth mechanism and luminescence properties

Homogeneous Y₂O₃:Eu³⁺ nanorods with the lengths of several micrometres were successfully synthesised on a large scale by using a urea-assisted hydrothermal method and a post-calcining process. In this study, the influences of urea content and NaOH concentration on the oriented growth, photoluminescence (PL) and electroluminescence (EL) intensity enhancement of Y₂O₃:Eu³⁺ were investigated. As a precipitant for isotropic growth, urea can counteract the effect of NaOH on oriented growth along the c-axis during hydrothermal treatment. The Y₂O₃:Eu³⁺ powders exhibited a strong red emission centred at 613 nm under either 245 nm UV excitation or the direct current high electric field. The PL intensity of the Y₂O₃:Eu³⁺ phosphor prepared with 0.3 g of urea reached 141 % that of the sample prepared under the same conditions but without urea. The strategy for controlling the oriented growth, PL and EL enhancement of Y₂O₃:Eu³⁺ can be extended to the synthesis of other inorganic nano/micromaterials.     

Low temperature sintering and dielectric properties of Ba<Subscript>3</Subscript>(VO<Subscript>4</Subscript>)<Subscript>2</Subscript> microwave ceramics using Co<Subscript>2</Subscript>O<Subscript>3</Subscript> additives

The Ba₃(VO₄)₂–x wt% Co₂O₃ (x?=?0.5–5) ceramics were prepared by the solid state reaction method in order to reduce the sintering temperature. The effects of the Co₂O₃ additions on the phase composition, microstructures, sintering characteristics and microwave dielectric properties of Ba₃(VO₄)₂ ceramics are investigated by an X-ray diffractometer, a scanning electron microscope and a network analyzer. As a result, the Q?×?f value of 54,000 GH, the ε _r of 14.6 and the τ_f value of +58.5 ppm/°C were obtained in the sample of the Ba₃(VO₄)₂–3 wt% Co₂O₃ ceramic sintered at the temperature of 925 °C, which is capable to co-fire with electrode metal of high conductivity such as Ag (961 °C). Moreover, the Q?×?f values of the sample with Co₂O₃ higher than that of 3 wt% additions decreased because of the formation of Ba₂V₂O₇ phase.     

Self-templated formation of tremella-like MoS<Subscript>2</Subscript> with expanded spacing of (002) crystal planes for Li-ion batteries

Tremella-like MoS₂ consisting of ultrathin nanosheets (~7 nm in thickness) is prepared via a one-pot hydrothermal reaction without using any surfactants and templates. The reaction involves transforming precursor MoO₃ to polyhedral intermediate (K₂NaMoO₃F₃ and K₃Mo₂O₄F₅) through its reaction with Na⁺, K⁺, and F^? ions in the initial stage of hydrothermal reaction. Then the polyhedral intermediate acting as the sacrifice template reacts with the S^2? released from a hydrolysis process of SCN^? ion and transforms to tremella-like MoS₂. The obtained MoS₂ product exhibits expended spacing of the (002) crystal plane, which can facilitate faster lithium ions intercalation behavior. This tremella-like MoS₂ used as an anode material for lithium-ion batteries shows a very high reversible capacity of 693 mA h g^?1 after 50 cycles, good rate capability, and high cyclic capacity retention. Even cycled at a high current density of 4800 mA g^?1, the tremella-like MoS₂ still can deliver a high capacity of 252 mA h g^?1. The secondary hierarchical microstructures consisting of ultrathin nanosheets are beneficial to greatly improved electrochemical performance of the MoS₂ electrode.     

Optical properties of Eu<Superscript>3+</Superscript> activated SrLa<Subscript>2</Subscript>O<Subscript>4</Subscript> red-emitting phosphors for WLED applications

The SrLa_2?xO₄:xEu³⁺ phosphors are synthesized through high-temperature solid-state reaction method at 1473 K with various doping concentration. Their phase structures, absorption spectra, and luminescence properties are investigated by X-ray diffraction (XRD), UV–Vis spectrophotometer and photoluminescence spectrometry. The intense absorption of SrLa_2?xO₄:xEu³⁺ phosphors have occurred around 400 nm. The prominent luminescence spectra of the prepared phosphors exhibited bright red emission at 626 nm. The doping concentration 0.12 mol% of Eu³⁺ is shown to be optimal for prominent red emission and chromaticity coordinates are x?=?0.692, y?=?0.3072. Considering the high colour purity and appropriate emission intensity of Eu³⁺ doped SrLa₂O₄ can be used as red phosphors for white light emitting diodes (WLEDs).     

Investigation for the synthesis of hierarchical Co<Subscript>3</Subscript>O<Subscript>4</Subscript>@MnO<Subscript>2</Subscript> nanoarrays materials and their application for supercapacitor

We designed and fabricated hierarchical Co₃O₄@MnO₂ nanoarrays directly grown on nickel foam by hydrothermal and calcination methods. After the investigation of growth mechanism, we found that the deposition of MnO₂ was based on the self-decomposition of KMnO₄ and the reducibility of Co₃O₄ during the hydrothermal process. Thanks to the hierarchical structure, the obtained electrode exhibited excellent capacitive performance in supercapacitor. It delivered 21.72 F cm^?2 at a current density of 5 mA cm^?2 and retained ~94 % capacitance of initial value after 5000 cycles.     

High-performance flexible supercapacitors based on C/Na<Subscript>2</Subscript>Ti<Subscript>5</Subscript>O<Subscript>11</Subscript> nanocomposite electrode materials

A new solution method to synthesize Na₂Ti₅O₁₁ with titanium powder is presented, and the C/Na₂Ti₅O₁₁ nanocomposite with high specific surface area and tunnel structure as the electrode material has excellent electrochemical performance. The single electrode composed of the C/Na₂Ti₅O₁₁ nanocomposite based on carbon fiber fabric (CFF) has the highest area capacitance of 1066 mF cm^?2 at a current density of 2 mA cm^?2, which is superior to other titanates and Na-ion materials for supercapacitors (SCs). By scan-rate dependence cyclic voltammetry analysis, the capacity value shows both capacitive and faradaic intercalation processes, and the intercalation process contributed 81.7% of the total charge storage at the scan rate of 5 mV s^?1. The flexible symmetric solid-state SCs (C/Na₂Ti₅O₁₁/CFF//C/Na₂Ti₅O₁₁/CFF) based on different C/Na₂Ti₅O₁₁ mass were fabricated, and 7 mg SCs show the best supercapacitive characteristics with an area capacitance of 309 mF cm^?2 and a specific capacitance of 441 F g^?1, it has a maximum energy density of 22 Wh kg^?1 and power density of 1286 W kg^?1. As for practical application, three SCs in series can power 100 green light-emitting diodes (LEDs) to light up for 18 min, which is much longer than our previous work by Wang et al. lighting 100 LEDs for 8 min. Thus, the C/Na₂Ti₅O₁₁ nanocomposite has promising potential application in energy storage devices.     

Strong up-conversion luminescence and electrical properties of SrBi<Subscript>4</Subscript>Ti<Subscript>4</Subscript>O<Subscript>15</Subscript> multifunctional ceramics by Er<Superscript>3+</Superscript> doping

Novel green-emitting piezoelectric ceramics of SrBi_4?x Er _x Ti₄O₁₅ (SBT-xEr) were prepared. Strong up-conversion with bright green (524 and 548 nm) and a relatively weak red (660 nm) emission bands were obtained under 980 nm excitation at room temperature, which is attributed to the intra 4f–4f electronic transition of (²H_11/2, ⁴S_3/2)–⁴I_15/2 and the transition from ⁴F_9/2 to ⁴I_15/2 of Er³⁺ ions, respectively. Simultaneously, Er³⁺ doping promotes the electrical properties. At 0.8 mol%Er, the optimal electric properties with high Curie temperature of T _c?~527?°C, large remanent polarization of 2P _r?~14.92 μC/cm² and piezoelectric constant of d ₃₃?~17 pC/N was achieved. As a multifunctional material, Er³⁺ doped SBT showed a great potential to be used in 3D-display, bio-imaging, solid state laser and optical temperature sensor.     

Single phased Sr<Subscript>3</Subscript>La(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>:Eu<Superscript>2+</Superscript>/Mn<Superscript>2+</Superscript> phosphors: solid state synthesis,tunable luminescence and potential applications in white light LEDs

A series of Sr₃La(PO₄)₃:Eu²⁺/Mn²⁺ phosphors were synthesized by a solid state reaction. The phase and the optical properties of the synthesized phosphors were investigated. The XRD results indicate that the doped Eu²⁺ and Mn²⁺ ions do not change the phase of Sr₃La(PO₄)₃. The peak wavelengths of Eu²⁺ single doped and Eu²⁺/Mn²⁺ codoped Sr₃La(PO₄)₃ phosphors shift to longer wavelength due to the larger crystal field splitting for Eu²⁺ and Mn²⁺. The increases of crystal field splitting for Eu²⁺ and Mn²⁺ are induced by the substitution of Sr²⁺ by Eu²⁺ and Mn²⁺ in Sr₃La(PO₄)₃ host. Due to energy transfer from Eu²⁺ to Mn²⁺ in Sr₃La(PO₄)₃:Eu²⁺/Mn²⁺ phosphors, tunable luminescence was obtained by changing the concentration of Mn²⁺. And the white light was emitted by Sr₃La(PO₄)₃:3.0 mol%Eu²⁺/4.0 mol%Mn²⁺ and Sr₃La(PO₄)₃:3.0 mol%Eu²⁺/5.0 mol%Mn²⁺ phosphors.     

Dielectric,humidity behavior and conductivity mechanism of Mn<Subscript>0.2</Subscript>Ni<Subscript>0.3</Subscript>Zn<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> ferrite prepared by co-precipitation method

Mn–Ni–Zn ferrite with the chemical formula of Mn_0.2Ni_0.3Zn_0.5Fe₂O₄ was prepared by co-precipitation method. The X-ray diffraction (XRD) results show that the prepared sample crystallizes in the cubic spinel structure with the space group of Fm3m. The morphological analysis of the sample was investigated by scanning electron microscopy (SEM). The dielectric properties of Mn_0.2Ni_0.3Zn_0.5Fe₂O₄ ferrite were studied in a frequency range from 20 Hz to 10 MHz and at a temperature range from 293 to 733 K. The dielectric constant decreases with the increasing frequency for all the temperature values chosen. The AC conductivity mechanism was found the small polaron type of conductivity, and in addition to that, the DC conductivity can be explained by Arrhenius type conductivity. According to the dielectric results, relaxation process fits Cole–Cole model. Finally, the effect of the relative humidity upon the impedance of the sample was discussed for a frequency range between 20 Hz and 10 MHz. It is found that the impedance values decrease almost linearly with the increasing % RH (relative humidity) values at low frequencies, while the impedance of the sample is independent of % RH at high frequencies.     

Enhanced electrochemical performance of Na<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>F<Subscript>3</Subscript> for Na-ion batteries with nanostructure and carbon coating

Carbon-coating Na₃V₂(PO₄)₂F₃ nanoparticles (NVPF@C NP) were prepared by a hydrothermal assisted sol–gel method and applied as cathode materials for Na-ion batteries. The as-prepared nanocomposites were composed of Na₃V₂(PO₄)₂F₃ nanoparticles with a typical size of ~?100 nm and an amorphous carbon layer with the thickness of ~?5 nm. Cyclic voltammetry, rate and cycling, and electrochemical impedance spectroscopy tests were used to discuss the effect of carbon coating and nanostructure. Results display that the as-prepared NVPF@C NP demonstrates a higher rate capability and better long cycling performance compared with bare Na₃V₂(PO₄)₂F₃ bulk (72 mA h g^?1 at 10 C vs 39 mA h g^?1 at 10 and 1 C capacity retention of 95% vs 88% after 50 cycles). The remarking electrode performance was attributed to the combination of nanostructure and carbon coating, which can provide short Na-ion diffusion distance and rapid electron migration.