Ion-selective electrode for the determination of prenalterol

A new prenalterol (Pr) ion-selective PVC membrane electrode based on the ion-pair complex of Pr with sodium tetraphenylborate was prepared and its performance characteristics were studied. The electrode exhibited a linear response with a good Nernstian slope over a relatively wide range of concentration. The electrode whose membrane was made of 8.0% (w/w) of ion pair, 49.5% (w/w) of dioctyl phthalate (DOP) and 43.5% (w/w) of PVC showed characteristics higher than those obtained with the other ones, namely, slope of 56.3 mV per concentration decade, at 25 °C; usable concentration range 1.2×10⁻⁵–3.2×10⁻² M prenalterol; response time ≤20 s. Up to 24 h continuous soaking, the calibration graph slope was constant at 56.0 mV per concentration decade, at 25 °C, then it decreased gradually as the time of soaking increases reaching 41 mV per decade after 11 days. The changes in pH did not affect the electrode performance within the range 2.2–7.5. The standard electrode potentials were determined at different temperatures and used to calculate the isothermal coefficient of the electrode. The electrode showed very good selectivity for Pr with respect to a large number of inorganic and organic cations. The standard addition method and potentiometric titration were used to determine Pr in pure solutions and in pharmaceutical formulations. The relative standard deviations (R.S.D.) of the three methods used for the determination of prenalterol in pharmaceutical formulations were 0.8, 2.1 and 1.9% of the extrapolation, standard addition and potentiometric methods, respectively.     

Ion-selective electrode for the determination of dimethylbenzylammonium ions

A sensor is proposed for the direct potentiometric determination of dimethylbenzylammonium in acid and neutral aqueous solutions. The sensor membrane is made of a polymeric composition on the basis of polyvinylchloride containing an ion associate and a solvent as a plasticizer. Salts of the tetraphenylborate anion and its derivatives served as ionophores. Basic electroanalytical parameters of the developed potentiometric sensors are studied and the pH range of their possible application is determined. The developed sensor is used as a reference electrode in the potentiometric titration of dimethylbenzylammonium with tetraphenylborate anions.     

Ion-selective electrode for gallium determination in nickel alloy, fly-ash and biological samples

A poly(vinyl chloride)-based membrane of 2,9-dimethyl-4,11-diphenyl-1,5,8,12-tetraazacyclotetradeca-1,4,8,11-tetraene (DDTCT) with sodium tetraphenyl borate (STB) as an anion excluder and dibutyl phthalate (DBP), dibutyl butylphosphonate (DBBP), tris(2-ethylhexyl) phosphate (TEP) and tributyl phosphate (TBP) as plasticizing solvent mediators was prepared and investigated as a Ga(III)-selective electrode. The best performance was observed with the membrane having the ligand-PVC-DBP-STB composition 1:4:1:1, which worked well over a wide concentration range (1.45 × 10⁻⁶ to 0.1 mol L⁻¹) with a Nernstian slope of 28.7 mV per decade of activity between pH 4.0 and 10.0. This electrode showed a fast response time of 12 s and was used over a period of 100 days with good reproducibility (s = 0.3 mV). The selectivity coefficients for monovalent, divalent and trivalent cations indicate excellent selectivity for Ga(III) ions over a large number of cations. Anions such as Cl⁻ and SO₄²⁻ do not interfere and the electrode also works satisfactorily in partially water-alcohol medium. The practical utility of the membrane sensor has also been observed in solutions contaminated with detergents, i.e., cetyltrimethylammonium bromide and sodium dodecyl sulfate and used for the determination of gallium in nickel alloy, fly-ash and biological samples.     

Ion-selective electrode for aluminum determination in pharmaceutical substances, tea leaves and water samples

A novel ion-selective PVC membrane sensor for Al(III) ions based on 6-(4-nitrophenyl)-2-phenyl-4-(thiophen-2-yl)-3,5-diaza-bicyclo[3.1.0]hex-2-ene (NTDH) as a new ionophore has been prepared and studied. The electrode exhibit a good response for aluminum ion over concentration range of 1.0x10(-6) to 1.0x10(-1) mol L(-1) with a Nernstian slope of 19.6+/-0.4 mV per decade and low detection limit of 6.3x10(-7) mol L(-1). The best performance was obtained with membrane composition 30% poly(vinyl chloride), 62% acetophenone, 5% oleic acid, 3% ionophore and 2 ml tetrahydrofuran. NTDH-based electrode was suitable for aqueous solutions of pH 3. It has relatively fast response time (approximately 10 s) and can be used at least for 3 months without any considerable divergence in potentials. The proposed membrane electrode revealed good selectivity for Al(III) ions over a wide variety of other cations. The standard electrode potentials were determined at different temperatures and used to calculate the isothermal coefficient of the electrode. The formation constant and stoichiometry ratio of ionophore-Al(III) complex were calculated at 25 degrees C by using segmented sandwich membrane method. It was used in non-aqueous solvents and also as indicator electrode in potentiometric determination of Al(III) ions in some real samples.     

Ion-selective electrode for salicylate assay in blood serum

A salicylate-selective membrane electrode made with heptyl-4-trifluoroacetylbenzoate as a neutral carrier was successfully applied for the determination of salicylate in blood serum. This procedure is advantageous because the free concentration of the drug in serum can be determined without sample preparation. The free salicylate concentrations determined by the ion-selective electrode compared to those obtained by conventional colorimetry gave a linear correlation coefficient 0.997 in the salicylate concentration range 0.1-2.5 mM.     

Electro-oxidation and determination of trazodone at multi-walled carbon nanotube-modified glassy carbon electrode

A simple and rapid electrochemical method was developed for the determination of trace-level trazodone, based on the excellent properties of multi-walled carbon nanotubes (MWCNTs). The MWCNT-modified glassy carbon electrode was constructed and the electrochemical behavior of trazodone was investigated in detail. The cyclic voltammetric results indicate that MWCNT-modified glassy carbon electrode can remarkably enhance electrocatalytic activity towards the oxidation of trazodone in neutral solutions. It leads to a considerable improvement of the anodic peak current for trazodone, and allows the development of a highly sensitive voltammetric sensor for the determination of trazodone. Trazodone could effectively accumulate at this electrode and produce two anodic peaks at about 0.73 V and 1.00 V. The electrocatalytic behavior was further exploited as a sensitive detection scheme for the trazodone determination by differential-pulse voltammetry. Under optimized conditions, the concentration range and detection limit are 0.2-10 μM and 24 nM, respectively for trazodone. The proposed method was successfully applied to trazodone determination in pharmaceutical samples. The analytical performance of this sensor has been evaluated for detection of analyte in urine as a real sample.     

Ion-selective carbon paste electrode based on new tripodal ligand for determination of cadmium (II)

A new chemically modified carbon paste electrode for Cd(II) ions based on 3,5-dinitro-N-(tri-2-pyridyl methyl) benzamide (DNTPMBA) as an ionophore was prepared. The electrode exhibits a Nernstian response for Cd(II) ions over a wide concentration range (2.16 × 10^?7–1.00 × 10^?1 mol L^?1) with a slope of 30 ± 1 mV per decade. It has a response time of about 50 s and can be used for a period of 3 months with good reproducibility. Detection limit obtained in the optimal conditions was 1.82 × 10^?7 mol L^?1. The electrode was successfully used for potentiometric determination of Cd(II) in well water. The pH influence and interference of some cations were also studied.     

Ion-selective electrode measurements for the determination of formation constants of alkali and alkaline earth metals with low-molecular-weight ligands

Formation constants of acetate, hydrogencarbonate, malonate, citrate and 1,2,3-propanetricarboxylate complexes with Na⁺, K⁺ and Ca²⁺ were determined potentiometrically using sodium, potassium and calcium selective electrodes, at 25 °C and at different ionic strengths, in the range 0 < I ≤ 1 M. Formation constants obtained by ion-selective electrode (ISE) measurements were compared with those obtained by different techniques. It has been found that the use of ISEs gives reliable results in the study of weak complexes, also under non-constant ionic strength conditions.     

Ion-selective electrodes for gold and silver determination

Some new ion-selective electrodes for silver and gold are described. They are based on the ion-associate species formed by the cyanide, chloride or thiourea complexes of the metals, with hydrophobic anions or cations, as appropriate. The electrodes have been applied to the determination of gold and silver in various technological process solutions in industry.     

Voltammetric reduction of finasteride at mercury electrode and its determination in tablets

Finasteride in hydroalcoholic solutions (ethanol/Britton-Robinson buffer, 30/70) exhibits cathodic response in a wide range of pH (-0.5 to 12) using differential pulse (DPP) and test polarography (TP). The reduction peak of finasteride at acidic pH, is a catalytic proton peak resulting from a mechanism involving a first protonation of finasteride followed by the reduction of the protons combined with finasteride in order to regenerate finasteride and liberate hydrogen. Based on the catalytic hydrogen wave, a novel method for the determination of finasteride can be proposed. For analytical purposes we selected DPP technique in an ethanol/0.0625 mol L(-1) H(2)SO(4) (30/70) solution medium. In this condition the I(p) varied linearly with finasteride concentration between 5 x 10(-5) and 5 x 10(-4) mol L(-1). Within-day and inter-day reproducibility's were adequate with R.S.D. values lower than 2%. The selectivity of the method was checked with both accelerated degradation trials and typical excipients formulations. The developed method was applied to the assay and the uniformity content of finasteride tablets and compared with the standard HPLC method. The DPP-developed method was adequate for the finasteride determination in pharmaceutical forms as that exhibited an adequate accuracy, reproducibility and selectivity. Furthermore, treatment of the sample was not required as in HPLC; the method is not time-consuming and less expensive than the HPLC ones.     

Ion-selective electrodes for the determination of ionic liquids in water using direct potentiometry

Ion-selective electrodes (ISEs) with membranes based on ion exchangers plasticized with o-nitrophenyl octyl ether (NPOE), diethyl sebacate (DES), or dibutyl phthalate (DBP) are used for the determination of ionic liquids (ILs) in water. The membrane composition is optimized with respect to the ion-exchanger concentration and the plasticizer.     

Ion-selective electrode studies on novel organic molecule sensors.

Researches on prospects for novel ion-selective electrodes, based on organic molecule sensors, are described. The organic molecules are large crown ethers extending from bis(metaphenylene)-26-crown-8 to bis(metaphenylene)-38-crown-12, small crown ethers, bis-crown ethers, and acyclic polyethers consisting of diphenyl ethers of tetraethylene glycol and receptor molecules of planar and tetrahedral tripodal types.     

Sensitive extractive spectrophotometric methods for the determination of trazodone hydrochloride in pharmaceutical formulations

Two simple, rapid and sensitive extractive spectrophotometric methods have been developed for the assay of trazodone hydrochloride (TRH) in pure and pharmaceutical formulations. These methods are based on the formation of chloroform soluble ion-association complexes of TRH with bromothymol blue (BTB) and with bromocresol purple (BCP) in KCl-HCl buffer of pH 2.0 (for BTB) and in NaOAc-AcOH buffer of pH of 3.6 (for BCP) with absorption maximum at 423 nm and at 408 nm for BTB and BCP, respectively. Reaction conditions were optimized to obtain the maximum color intensity. The absorbance was found to increase linearly with increase in concentration of TRH, which was corroborated by the calculated correlation coefficient values (0.9996, 0.9945). The systems obeyed Beer's law in the range of 0.2-14.5 and 0.2-14.1 microg/ml for BTB and BCP, respectively. Various analytical parameters have been evaluated and the results have been validated by statistical data. No interference was observed from common excipients present in pharmaceutical formulations. The proposed methods are simple, accurate and suitable for quality control applications.     

Ion-selective electrodes based on metalloporphyrins for gibberellic acid determination in agricultural products

This work describes the construction, evaluation and analytical application of electrodes selective to the gibberellate anion for the determination of gibberellic acid in agricultural products. Several types of PVC membrane electrodes without internal reference solution were prepared using the manganese(III) complex of meso -tetraphenylporphyrin (TPP) as ionophore and dibutyl phthalate (DBP), as plasticizer. The incorporation of lipophilic chemical species as additives, was also carried out aiming the evaluation of the response characteristics of the electrodes. To accomplish the analysis of commercial agricultural products a selective membrane composed of 28.0% (w/w) of PVC, 66.0% (w/w) of plasticizer and 6% (w/w) of ionophore was used, with no additive. This potentiometric unit presented a linear response between 10^-4 and 10^-1 mol L^-1 in gibberellate, a slope of about ⫙ mV dec^-1 and a reproducibility of about ǃ mV day^-1. The potentiometric analysis of gibberellic acid in commercial products was carried out by direct potentiometry and the results obtained were compared with those provided by HPLC.     

Microbiological assay for the determination of telithromycin in tablets

This study describes the development and validation of a microbiological assay, applying the cylinder-plate method, for the determination of the antibiotic telithromycin. The microbiological method consisted of a cylinder-plate agar diffusion assay using Micrococcus luteus ATCC 9341 as the test microorganism. The response graphs for standard and sample solutions were linear (r = 0.9987), and no parallelism deviations were detected in the tested concentrations (0.25, 0.5, and 1.0 microg/mL). The interday precision was 2.67%. Recovery values were between 96.75 and 100.91%. A preliminary stability study of telithromycin showed that the microbiological assay is specific for the determination of telithromycin in the presence of its degradation products. The proposed method allows the quantitation of telithromycin in pharmaceutical dosage form and can be used for drug analysis in routine quality control.     

Enzyme electrode for the determination of salicylate

Salicylate hydorxylase is used with a carbon dioxide sensor for the determination of salicylate in aqueous solution and pooled serum. The enzyme is physically entrapped with a dialysis membrance at the sensing tip of the carbon dioxide electrode. The enzyme catalyses the stoichiometric formation of catechol and carbon dioxide from salicylate and reduced pyridine nucleotide in the presence of flavin adenine dinucleotide as a specific cofactor. The carbon dioxide is detected by the sensor and related to the concentration of salicylate via a calibration curve. The method compares favorably with the spectrophotometric method for assay of salicylate. Although suitable for salicylate concentrations in the range of 5–300 μg ml^?1, its response below 5 μg ml^?1 is limited by the detection limit of the carbon dioxide sensor.     

Ion-selective electrodes for determination of organic ammonium ions: Ways for selectivity control

The influence of the ISE membrane composition on the selectivity for primary, secondary, tertiary, and quaternary alkylammonium cations, as well as for cations of physiologically active amines, has been investigated. Factors studied include the effect of plasticizer (2-nitrophenyl octyl ether, o-NPOE; dibutyl phthalate, DBP; dinonyl adipate, DNA; tris(2-ethylhexyl) phosphate, TEHP) and ion exchanger (potassium tetrakis(4-chlorophenyl)borate, K(TpClPB); potassium tris(nonyloxy)benzenesulfonate, K(TNOBS)), as well as that of the lipophilic cationic additive (tetradecylammonium nitrate, (TDA)NO(3)) and neutral carrier (dibenzo-18-crown-6) presence in membrane. It has been established that plasticizer nature affects K(i,j)(pot) values both when the target and/or foreign ions have non-ionic polar groups capable of specific interaction with plasticizer, and when the only difference consists in the substitution degree of their ionic groups. K(i,j)(pot) values for quaternary alkylammonium cations over primary-tertiary ones change in the following order: TEHP>DBP approximately DNA>o-NPOE. The highest K(i,j)(pot) value change is achieved for the primary-quaternary alkylammonium cation pair, amounting to 3 and 4.7 orders for membranes containing K(TNOBS) and K(TpClPB) as ion exchangers, respectively. In its turn, the ion exchanger influence on the selectivity depends on plasticizer nature, it being maximal for o-NPOE (about 2 orders) and practically non-existent for TEHP. On the whole, as compared to K(TpClPB)-based ISEs, those based on K(TNOBS) show higher selectivity for primary-tertiary alkylammonium cations over quaternary ones. Incorporation of (TDA)NO(3) into membrane causes further improvement of selectivity for primary-tertiary alkylammonium cations in the case of K(TNOBS) only. The maximal total effect of the ion exchanger and lipophilic ionic additive is observed for ISEs with DNA-plasticized membranes and is over 3 orders. The influence of crown ether on the selectivity also depends significantly upon ion exchanger and plasticizer nature. For ISEs with o-NPOE-plasticized membranes the K(i,j)(pot) value changes can be as great as 3 (ion exchanger K(TNOBS)) and even 4.5 (ion exchanger K(TpClPB)) orders. On the contrary, for ISEs with TEHP-plasticized membranes the crown ether effect on the selectivity is unessential. The results obtained are explained by peculiarities of organic ammonium cations solvating by plasticizer and association of cations with ion exchangers.