A high-throughput assay for the adenylation reaction of bacterial DNA ligase

DNA ligase catalyzes the closure of single-strand nicks in double-stranded DNA that arise during replication and recombination. Inhibition of bacterial ligase is expected to cause chromosome degradation and cell death, making it an attractive target for new antibacterials. The prototypical bacterial ligase couples the hydrolysis of NAD(+) to phosphodiester bond formation between an adjacent 3'OH and 5'-terminal phosphate of nicked duplex DNA. The first step is the reversible formation of a ligase-adenylate from the reaction between apoenzyme and NAD(+). Inhibitors that compete with NAD(+) are expected to be bacterial specific because eukaryotic DNA ligases use ATP and differ in the sequence composition of their adenylation domain. We report here a high-throughput assay that measures the adenylation reaction specifically by monitoring ligase-AMP formation via scintillation proximity technologies. Escherichia coli DNA ligase was biotinylated in vivo; after reaction with radiolabeled NAD(+), ligase-[(3)H]AMP could be captured onto the streptavidin-coated surface of the solid scintillant. The method was ideal for high-throughput screening because it required minimal manipulations and generated a robust signal with minimal scatter. Certain adenosine analogs were found to inhibit the adenylation assay and had similar potency of inhibition in a DNA ligation assay.     

A capillary electrophoresis-based enzyme assay for kinetics and inhibition studies of carbonic anhydrase

In the current study, capillary electrophoresis (CE)-based enzyme assay for characterization and inhibition study of bovine carbonic anhydrase II (bCA II) was developed. The developed method is the first CE assay for carbonic anhydrase (CA). The method was optimized in order to get short analysis time, minimal sample volume consumption, and high resolution of substrate and product. The CE conditions were optimized as follows: fused-silica capillary (30 cm effective length × 75 μm i.d.), pressure injection for 5 s, 20 mM sodium borate buffer (pH 9.0), constant voltage of 15 kV, constant capillary temperature of 25 °C, and detection at 260 nm. For precise measurements, uridine was used as an internal standard during optimization of the CE methods. The limits of detection and quantification for p-nitrophenyl acetate (p-NPA) were 3.01 and 9.12 μM, respectively, whereas for p-nitrophenolate they were 2.05 and 6.22 μM, respectively. The performance of the developed method was confirmed by determination of kinetic parameters (i.e., K_m and V_max of bCA for p-NPA); the inhibition constant (K_i) was determined for furosemide, a standard inhibitor of CA. The new method proved to be fast and efficient, and it can be used for the investigation of inhibitors of all isoforms of CAs.     

Continuous enzyme-coupled assay for microbial transglutaminase activity

Transglutaminases (protein-glutamine:amine γ-glutamyltransferase, EC 2.3.2.13) are a family of calcium-dependent enzymes that catalyze an acyl transfer between glutamine residues and a wide variety of primary amines. When a lysine residue acts as the acyl-acceptor substrate, a γ-glutamyl-ε-lysine isopeptide bond is formed. This isopeptide bond formation represents protein cross-linking, which is critical to several biological processes. Microbial transglutaminase (mTG) is a bacterial variant of the transglutaminase family, distinct by virtue of its calcium-independent catalysis of the isopeptidic bond formation. Furthermore, mTG’s promiscuity in acyl-acceptor substrate preference highlights its biocatalytic potential. The acyl-donor substrate, however, is limited in its scope; the amino acid sequences flanking glutamine residues dramatically affect substrate specificity and activity. Here, we have developed and optimized a modified glutamate dehydrogenase assay with the intention of analyzing potential high-affinity peptides. This direct continuous assay presents significant advantages over the commonly used hydroxamate assay, including generality, sensitivity, and ease of manipulation. Furthermore, we identified 7M48 (WALQRPH), a high-affinity peptide that shows greater affinity with mTG (K_M = 3 mM) than the commonly used Cbz-Gln-Gly (K_M = 58 mM), attesting to its potential for application in biocatalysis and bioconjugation.     

Development of a colorimetric assay for heparanase activity suitable for kinetic analysis and inhibitor screening

The role that heparanase plays during metastasis and angiogenesis in tumors makes it an attractive target for cancer therapeutics. Despite this enzyme’s significance, most of the assays developed to measure its activity are complex. Moreover, they usually rely on labeling variable preparations of the natural substrate heparan sulfate, making comparisons across studies precarious. To overcome these problems, we have developed a convenient assay based on the cleavage of the synthetic heparin oligosaccharide fondaparinux. The assay measures the appearance of the disaccharide product of heparanase-catalyzed fondaparinux cleavage colorimetrically using the tetrazolium salt WST-1. Because this assay has a homogeneous substrate with a single point of cleavage, the kinetics of the enzyme can be reliably characterized, giving a K_m of 46 μM and a k_cat of 3.5 s⁻¹ with fondaparinux as substrate. The inhibition of heparanase by the published inhibitor, PI-88, was also studied, and a K_i of 7.9 nM was determined. The simplicity and robustness of this method, should, not only greatly assist routine assay of heparanase activity but also could be adapted for high-throughput screening of compound libraries, with the data generated being directly comparable across studies.     

A fluorometric assay for angiotensin-converting enzyme activity

A simple and sensitive assay for angiotensin-converting enzyme (ACE; EC 3.4.15.1) activity has been developed which employs fluorescently labeled tripeptides. ACE hydrolyzes dansylphenylalanyl-arginyl-tryptophan or dansyl-phenylalanyl-arginyl-phenylalanine, liberating dansyl-phenylalanine and a dipeptide. Dansyl-phenylalanine partitions quantitatively into chloroform, whereas the substrates are virtually insoluble in chloroform. This allows rapid measurement of ACE activity with high signal-to-noise ratios even when microliter aliquots of human serum are assayed. Inhibition studies of the dansyl-tripeptide cleaving activity of human serum and rat lung, the identity of the products of enzyme action, and the regional distribution of enzyme activity among rat tissues demonstrate that only ACE cleaves these substrates under the conditions employed here. This assay may be useful for the clinical measurement of human serum ACE activity and for research investigations of ACE from a variety of tissues.     

A nonradioactive high-throughput assay for screening and characterization of adenylation domains for nonribosomal peptide combinatorial biosynthesis

Adenylation domains are critical enzymes that dictate the identity of the amino acid building blocks to be incorporated during nonribosomal peptide (NRP) biosynthesis. NRPs display a wide range of biological activities and are some of the most important drugs currently used in clinics. Traditionally, activity of adenylation domains has been measured by radioactive ATP-[³²P]pyrophosphate (PP_i) exchange assays. To identify adenylation domains for future combinatorial production of novel NRPs as potential drugs, we report a convenient high-throughput nonradioactive method to measure activity of these enzymes. In our assay, malachite green is used to measure orthophosphate (P_i) concentrations after degradation by inorganic pyrophosphatase of the PP_i released during aminoacyl-AMP formation by action of the adenylation domains. The assay is quantitative, accurate, and robust, and it can be performed in 96- and 384-well plate formats. The performance of our assay was tested by using NcpB-A₄, one of the seven adenylation domains involved in nostocyclopeptide biosynthesis. The kinetics of pyrophosphate release monitored by this method are much slower than those measured by a traditional ATP-[³²P]PP_i exchange assay. This observation indicates that the formation of the adenylated amino acid and its release are the rate-limiting steps during the catalytic turnover.     

Development and validation of a fluorogenic assay to measure separase enzyme activity

Separase, an endopeptidase, plays a pivotal role in the separation of sister chromatids at anaphase by cleaving its substrate cohesin Rad21. Recent study suggests that separase is an oncogene. Overexpression of separase induces aneuploidy and mammary tumorigenesis in mice. Separase is also overexpressed and mislocalized in a wide range of human cancers, including breast, prostate, and osteosarcoma. Currently, there is no quantitative assay to measure separase enzymatic activity. To quantify separase enzymatic activity, we have designed a fluorogenic assay in which 7-amido-4-methyl coumaric acid (AMC)-conjugated Rad21 mitotic cleavage site peptide (Ac-Asp-Arg-Glu-Ile-Nle-Arg-MCA) is used as the substrate of separase. We used this assay to quantify separase activity during cell cycle progression and in a panel of human tumor cell lines as well as leukemia patient samples.     

A high-throughput screening fluorescence polarization assay for fatty acid adenylating enzymes in Mycobacterium tuberculosis

Mycobacterium tuberculosis, the etiological agent of tuberculosis (TB), encodes for an astonishing 34 fatty acid adenylating enzymes (FadDs), which play key roles in lipid metabolism. FadDs involved in lipid biosynthesis are functionally nonredundant and serve to link fatty acid and polyketide synthesis to produce some of the most architecturally complex natural lipids including the essential mycolic acids as well as the virulence-conferring phthiocerol dimycocerosates, phenolic glycolipids, and mycobactins. Here we describe the systematic development and optimization of a fluorescence polarization assay to identify small molecule inhibitors as potential antitubercular agents. We fluorescently labeled a bisubstrate inhibitor to generate a fluorescent probe/tracer, which bound with a K_D of 245 nM to FadD28. Next, we evaluated assay performance by competitive binding experiments with a series of known ligands and assessed the impact of control parameters including incubation time, stability of the signal, temperature, and DMSO concentration. As a final level of validation the LOPAC1280 library was screened in a 384-well plate format and the assay performed with a Z-factor of 0.75, demonstrating its readiness for high-throughput screening.     

A continuous assay of myristoyl-CoA:protein N-myristoyltransferase for proteomic analysis

Protein N-myristoylation is an important lipid modification that affects the activity and membrane-binding properties of crucial proteins belonging to signal transduction cascades. The aim of this work was to develop a rapid and easy diagnostic method to check for (i) effective N-myristoylation of any given protein and (ii) easy proteome annotation. The N-myristoylation reaction was coupled to that of pyruvate dehydrogenase, and NADH was continuously detected spectrophotometrically. This method was optimized for and applied to full-length Saccharomyces cerevisiae and Arabidopsis thaliana N-myristoyltransferases and two A. thaliana enzyme derivatives. The data were validated by comparison with a previously described discontinuous assay, modification of the chemical nature of the substrates, and use of specific inhibitors. The kinetics of N-myristoylation were determined in vitro with various compounds including a full-length polypeptide substrate, a small G protein of the RAB family already known to be N-myristoylated in vivo. This automated assay can be used for proteomic studies to determine the N-myristoylation state of any protein.     

A new robust kinetic assay for DAP epimerase activity

DAP epimerase is the penultimate enzyme in the lysine biosynthesis pathway. The most versatile assay for DAP epimerase catalytic activity employs a coupled DAP epimerase–DAP dehydrogenase enzyme system with a commercial mixture of DAP isomers as substrate. DAP dehydrogenase converts meso-DAP to THDP with concomitant reduction of NADP⁺ to NADPH. We show that at high concentrations, accumulation of NADPH results in inhibition of DAPDH, resulting in spurious kinetic data. A new assay has been developed employing DAP decarboxylase that allows the reliable characterisation of DAP epimerase enzyme kinetics.     

Rapid continuous colorimetric enzyme assay for penicillin G acylase

A rapid, continuous, colorimetric enzyme assay for penicillin G acylase has been developed. The assay measures the formation of the acidic products of penicillin G hydrolysis by following the decrease in pH using Phenol Red as an indicator. The activity measured is directly proportional to the amount of enzyme added to the assay, having a linear relationship with an R ² value of 0.9994.     

A high-throughput colorimetric assay to characterize the enzyme kinetic and cellular activity of spermidine/spermine N-acetyltransferase 1

Spermidine/spermine N¹-acetyltransferase 1 (SSAT1) is a key enzyme that catalyzes the catabolism of polyamines. SSAT1 is a very important enzyme because it not only maintains the homeostasis of polyamines but also is involved in many physiological and pathological events. As such, a rapid assay of SSAT1 activity is valuable in drug screening and clinical diagnostics. Here, we report a novel colorimetric assay for monitoring SSAT1 activity in zebrafish (zSSAT1). In comparison with the available SSAT1 assays, this new method is cost-effective and simple. The optimal zSSAT1 activity was obtained below 55 °C in a mild alkaline environment. The K_m values of zSSAT1 for spermidine and spermine are 55 and 182 μM, respectively, whereas putrescine is not a good substrate for zSSAT1. In addition to enzyme kinetic studies, the colorimetric assay was also used to detect the cellular activity of SSAT1. Thus, the current method is a reliable assay for determining SSAT1 activity with many potential applications in medical biology.     

A continuous spectrophotometric assay method for peptidylarginine deiminase type 4 activity

A simple, continuous spectrophotometric assay for peptidylarginine deiminase (PAD) is described. Deimination of peptidylarginine results in the formation of peptidylcitrulline and ammonia. The ammonia released during peptidylarginine hydrolysis is coupled to the glutamate-dehydrogenase-catalyzed reductive amination of alpha-ketoglutarate to glutamate and reduced nicotinamide adenine dinucleotide (NADH) oxidation. The disappearance of absorbance at 340nm due to NADH oxidation is continuously measured. The specific activity obtained by this new protocol for highly purified human PAD is comparable to that obtained by a commonly used colorimetric procedure, which measures the ureido group of peptidylcitrulline by coupling with diacetyl monoxime. The present continuous spectrophotometric method is highly sensitive and accurate and is thus suitable for enzyme kinetic analysis of PAD. The Ca(2+) concentration for half-maximal activity of PAD obtained by this method is comparable to that previously obtained by the colorimetric procedure.     

A continuous nonradioactive assay for RNA-dependent RNA polymerase activity

Current assays for the activity of viral RNA-dependent RNA polymerases (RdRps) are inherently end-point measurements, often requiring the use of radiolabeled or chemically modified nucleotides to detect reaction products. In an effort to improve the characterization of polymerases that are essential to the life cycle of RNA viruses and develop antiviral therapies that target these enzymes, a continuous nonradioactive assay was developed to monitor the activity of RdRps by measuring the release of pyrophosphate (PP(i)) generated during nascent strand synthesis. A coupled-enzyme assay method based on the chemiluminescent detection of PP(i), using ATP sulfurylase and firefly luciferase, was adapted to monitor poliovirus 3D polymerase (3D(pol)) and the hepatitis C virus nonstructural protein 5B (NS5B) RdRp reactions. Light production was dependent on RdRp and sensitive to the concentration of oligonucleotide primer directing RNA synthesis. The assay system was found to be amenable to sensitive kinetic studies of RdRps, requiring only 6nM 3D(pol) to obtain a reliable estimate of the initial velocity in as little as 4 min. The assay can immediately accommodate the use of both homopolymer and heteropolymer RNA templates lacking uridylates and can be adapted to RNA templates containing uridine by substituting alpha-thio ATP for ATP. The low background signal produced by other NTPs can be corrected from no enzyme (RdRp) controls. The effect of RdRp/RNA template preincubation was assessed using NS5B and a homopolymer RNA template and a time-dependent increase of RdRp activity was observed. Progress curves for a chain terminator (3(')-deoxyguanosine 5(')-triphosphate) and an allosteric NS5B inhibitor demonstrated the predicted time- and dose-dependent reductions in signal. This assay should facilitate detailed kinetic studies of RdRps and their potential inhibitors using either standard or single-nucleotide approaches.     

A microtitre plate assay for measuring glycosidase activity

Glycosidases perform a wide range of functions in physiology and pathology, and are potential targets for the treatment of diseases such as influenza, cancer, AIDS and diabetes. This paper reports a convenient discontinuous colourimetric assay for the measurement of glycosidase activity. The assay utilises 4-nitrophenyl- substrates and quantities of product are determined by measuring absorbance at 405 nm. This assay is performed in a 96 well microtitre plate and has been used to characterise the properties of seven different glycosidases from bacteria, yeast and higher eukaryotes and their kinetic parameters determined. Assays in the presence of known inhibitors showed that inhibition modes can be determined, and IC₅₀ and K_i values calculated. This assay appears to be of widely applicable and of general utility for the measurement of glycosidase activity and the evaluation of inhibitors.     

A simple and sensitive ribonucleotide reductase assay

Ribonucleotide reductase (RR) is a key regulatory enzyme in the DNA synthesis pathway and is the target of the cancer chemotherapeutic agent hydroxyurea. The study of RR is significantly hindered by the tedious and labor-intensive nature of enzymatic assay. In this report, we present a novel RR assay in which detection of the deoxyribonucleotides produced by RR occurs via coupling to the DNA polymerase reaction, and is enhanced by using RNase to degrade endogenous RNA. Cell extracts from various cell lines were treated with RNase and then reacted with ATP and radioactive ribonucleotide diphosphate as the substrate. Incorporation of the radioactive substrate [¹⁴C]CDP into DNA was linear over 30 min and was linear with the amount of extract, which provided RR activity. The reaction was inhibited by hydroxyurea and required Mg²⁺ and ATP, suggesting that the assay is specific to RR activity. While RR activities determined by our method and by a conventional method were comparable, this novel method proved to be simpler, faster, more sensitive and less expensive. In addition, assay of the RR activity for multiple samples can easily be performed simultaneously. It is superior to other RR assays in all aspects.     

Reaction of Trigonopsis variabilis d-amino acid oxidase with 2,6-dichloroindophenol: kinetic characterisation and development of an oxygen-independent assay of the enzyme activity

2,6-Dichloroindophenol (DCIP) is shown to be utilised efficiently as electron acceptor replacing dioxygen in the reaction of Trigonopsis variabilis d-amino acid oxidase (TvDAO) with d-methionine as the substrate. The specificity constant for DCIP reduction at 30 °C is one-twelfth that of oxygen conversion into hydrogen peroxide. Time course analysis of simultaneous consumption of DCIP and dioxygen, recorded on-line by absorption and non-invasive fluorescence quenching, respectively, pinpoints the preferential utilisation of dioxygen; and reveals a maximum DCIP conversion rate that is independent of the initial concentration of dioxygen. A robust direct assay of TvDAO activity has been developed that does not require anaerobic reaction conditions. It was down-scaled to microtitre plate format and overcomes practical limitations of other assays due to the low affinity of TvDAO for dioxygen (K_m ≈ 0.7 mmol L⁻¹).     

A multiwell format assay for heparanase

This assay employs a biotinylated heparan sulfate glycosaminoglycan (HSGAG) substrate that is covalently linked to the surface of 96-well immunoassay plates. The ratio of biotin:HSGAG and the coating concentration of substrate bound to the wells have been optimized and allow removal of biotin HSGAG within 60 min of incubation at 37 degrees C in assay buffer with a standard dilution of bacterial heparitinase or platelet heparanase. Loss of biotin signal from the well surface is detected on incubation with peroxidase-streptavidin followed by color development using 3,3',5,5'-tetramethylbenzidine as the peroxidase substrate. The new assay allows specific detection of heparanase activity in multiple samples in a total time of 3 h including a 1-h substrate digestion step and is a significant improvement with regard to sensitivity, specificity, and ease of handling of multiple samples compared to other described assays. Heparanase specifically degrades the biotinylated HSGAG substrate, when used with an optimized assay buffer. A range of enzymes including collagenase, trypsin, plasmin, pepsin, chondroitinases, hyaluronidase, and neuraminidase show no effect on the substrate under optimized assay conditions. The covalent linkage of the substrate to the well prevents leaching of substrate and allows preparation and long-term storage of substrate-coated plates. The assay can be used to detect heparanase levels in clinical samples and cell culture supernatants and is ideal as a screening method for antagonists of enzyme activity.     

A filter assay for polysialyltransferas

Abstract Polysialic acids occur as capsular polysaccharides of several pathogenic bacteria. An understanding of how polysialyltransferase functions in the synthesis of polysialic acid will require enzyme purification and characterization in concert with genetic analysis. A rapid filter assay has been developed for bacterial polysialyltransferase suitable for enzyme purification. The filter assay and the currently used paper chromatography methods are equivalent in parallel experiments. The Escherichia coli K92 polysialyltransferase exhibited the same pH and temperature optima, Mg²⁺ dependence and acceptor specificity in both assays. [¹⁴C]Sialic acid bound in filter assays correlates with polymer formed by gel filtration. Specificity may be increased by the addition of exogenous acceptors.