内分泌干扰物雌酮分子印迹新型吸附功能材料的制备及其选择性能研究料

采用分子印迹本体聚合法,制备了对内分泌干扰物雌酮具有高选择识别能力的分子印迹聚合物。吸附动力学和选择性实验结果表明,与非印迹聚合物相比,印迹聚合物具有较高的吸附容量和吸附速率,对模板分子具有较高的选择性。聚合反应条件对印迹聚合物的吸附和识别性能有重要影响,以丙烯酰胺为功能单体,模板分子、功能单体和交联剂摩尔比为1：3：6,制备的印迹聚合物具有较高的选择和吸附性能。     

内分泌干扰物雌酮分子印迹新型吸附功能材料的制备及其选择性能研究

采用分子印迹本体聚合法,制备了对内分泌干扰物雌酮具有高选择识别能力的分子印迹聚合物。吸附动力学和选择性实验结果表明,与非印迹聚合物相比,印迹聚合物具有较高的吸附容量和吸附速率,对模板分子具有较高的选择性。聚合反应条件对印迹聚合物的吸附和识别性能有重要影响,以丙烯酰胺为功能单体,模板分子、功能单体和交联剂摩尔比为1:3:6,制备的印迹聚合物具有较高的选择和吸附性能。     

尼莫地平分子印迹聚合物的制备及热力学性能研究

采用本体聚合法,以甲基丙烯酸(MAA)为功能单体、三羟甲基丙烷三丙烯酸酯(TMPTA)为交联剂、尼莫地平为模板分子,制备了分子印迹聚合物。运用平衡结合实验,研究了印迹聚合物对尼莫地平、尼群地平、非洛地平药物分子的选择性识别能力。3种药物的静态吸附分配系数KD值分别为0.221 4、0.197 2、0.051 4。结果表明分子印迹聚合物对尼莫地平有较高的选择性。测定了不同温度下印迹聚合物的吸附等温曲线,表明吸附等温线为Ⅰ型吸附等温线,且随着温度的升高吸附量降低,说明吸附过程是放热过程。为了进一步研究印迹聚合物的吸附机理,进行了热力学性质的研究,测定了不同温度下吸附过程的熵变、焓变和吉布斯自由能变化,实验结果表明吸附是焓控制过程。     

绿原酸印迹微球的制备及其色谱行为研究

以绿原酸为模板,甲基丙烯酸为功能单体,二乙烯苯为交联剂,采用沉淀聚合法制备了绿原酸印迹微球。探讨了模板及功能单体类型和用量对聚合物颗粒均匀性的影响,考察了流动相组成及柱温对分子印迹柱色谱保留和选择性的影响。绿原酸印迹微球的制备条件为:模板-功能单体-交联剂的用量比为0.375∶1.5∶7.0,摇瓶转速为15r/min时,微球直径约2.5μm,聚合物收率为35.4%。流动相组成及含水量对印迹聚合物的保留行为影响较大,当用乙腈-水混合物为流动相时,含水量增加,各化合物在印迹色谱柱上的保留因子降低:当流动相含水量高于2.5%,分子印迹聚合物失去选择识别能力;但以0.002mol/L磷酸缓冲液(p H3.0)-乙腈混合液为流动相时,分子印迹柱对模板的保留因子、选择性及色谱峰形都有较大改进。当二者体积比为19∶1,保留因子高达90.69,其选择性相对于没食子酸和原儿茶酸高达23.10和6.562。温度影响分子印迹聚合物的选择保留能力,当温度从25℃提高到45℃时,印迹聚合物对模板的保留因子从3.52降低到2.41,选择性因子降低约30%。     

腈菌唑分子印迹聚合物的制备及识别性能研究

以腈菌唑为模板分子，采用原位分子印迹技术，制备具有特定识别性能的连续棒状分子印迹聚合物。考察了流动相中酸量对分离的影响，研究了几种结构类似物在所得分子印迹柱上的保留特性。结果表明，这种棒状分子印迹聚合物比相应的空白聚合物有高的识别性能和选择性。     

三聚氰胺分子印迹整体柱识别性能的研究

以三聚氰胺(MAM)为模板分子,甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,原位聚合法制备了对MAM有很强选择性识别能力的分子印迹整体柱。采用脉冲洗脱法快速筛选MAM的洗脱剂,通过前沿色谱法测定了整体柱对MAM的结合容量。实验表明,所制备的印迹整体柱对MAM有极强亲和作用力,即使在强极性流动相中(甲醇或甲醇-水(V/V=80/20)),MAM在印迹柱上也有强保留,不被洗脱。实验测得结合位点数(Lt)和解离常数(Kd)分别为:印迹柱Lt=2.28×103μmol/g,Kd=2.45×10-5mol/L;空白柱Lt=366μmol/g,Kd=23.7mo/L。该印迹整体柱有望作为固相萃取柱,在线或离线选择性富集样品中的MAM。     

沉淀聚合法制备TNT分子印迹聚合物微球

以TNT为模板分子,丙烯酰胺为功能单体,二甲基丙烯酸乙二醇酯为交联剂,乙腈为溶剂,用沉淀聚合法制备了TNT分子印迹微球.紫外吸收光谱证实TNT与丙烯酰胺之间存在相互作用;平衡吸附实验结果表明,制备的分子印迹聚合物微球对TNT分子有较好的特异性吸附能力,能够选择性识别TNT分子.     

前沿分析法研究对-羟基苯甲酸印迹整体柱的热力学行为

采用矩形前沿分析法对原位聚合的对-羟基苯甲酸印迹整体柱的热力学吸附等温线进行了测定. 印迹整体柱的吸附等温线是分别以乙腈、甲醇、 四氢呋喃和含有体积分数分别为1%, 3%, 5%和7%乙酸的乙腈为流动相以及在以甲醇为流动相时柱温分别为20, 40和50 ℃的条件下测定的. 吸附等温线表明, 印迹整体柱对模板分子的吸附能力比其结构类似物(邻-羟基苯甲酸)的吸附能力强. 用双Langmuir方程对不同条件下得到的实验数据进行拟合, 得到模板分子和邻-羟基苯甲酸在印迹整体柱各种吸附位点上的饱和吸附量和键合常数, 结果表明, 流动相中乙酸含量、有机溶剂的性质和柱温对模板分子容量因子的影响比对邻-羟基苯甲酸的大, 造成印迹聚合物的选择性随条件的变化而发生了明显的改变.     

虚拟模板/硅胶表面分子印迹材料的制备及其在海水溶液中的吸附行为研究

以萘乙酸为虚拟模板,以甲基丙烯酸为功能单体、二甲基丙烯酸乙二醇酯为交联剂,用表面聚合-牺牲硅胶法合成了孔状结构的萘分子印迹聚合物.采用红外光谱、扫描电镜和N2吸附实验对印迹聚合物进行了表征;运用理论化学计算探讨了功能单体的筛选方法;利用平衡吸附法考察了印迹材料对海水中萘、蒽、菲化合物选择识别特性.实验表明: 以α-萘乙酸分子为模板的分子印迹聚合物对萘具有较好的识别能力.另外,由于α-萘乙酸分子中羧基的存在,使得分子印迹聚合物(MIP)的印迹空穴又与菲的体积大小相匹配,所以也表现出对菲的独特吸附能力.制备的印迹材料可望用于海水中2～3环多环芳烃的选择性吸附与富集.     

TNT分子印迹聚合物微球的合成与性能研究

以三硝基甲苯(TNT)为模板分子,EDMA为交联剂,采用沉淀聚合法制备了TNT分子印迹微球.讨论了溶剂用量、模板分子用量、功能单体种类等对分子印迹微球的形貌及吸附性能的影响;利用紫外吸收光谱和BET表征了印迹聚合物微球的结合位点相互作用与印迹孔穴结构;通过平衡吸附和选择性吸附实验,研究了印迹聚合物微球的吸附性能和选择性识别性能.结果表明,以丙烯酰胺为功能单体制备的分子印迹聚合物为规则的球形,内部含有分子印迹孔穴,微球的粒径为1～2μm.印迹聚合物微球可在30 min内达到吸附平衡,在1 mmol/L的TNT乙醇溶液中,印迹聚合物微球的平衡吸附量为32.5 mmol/kg,对TNT分离系数为25.19,具有较好的特异性吸附能力,并可选择性识别TNT分子.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

解决能源问题的新途径——光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。