Dyeing kinetics of methacrylic acid grafted polyester fabric with astrazonrot violet and rhodamine red basic dyes

The low‐temperature dyeing kinetics of radiation‐grafted poly(ethylene terephthalate) fabric were studied. The effects of the graft yield (GY), dye concentration, and dyeing temperature on the color difference (CD) of methacrylic acid grafted polyester fabric were studied for astrazonrot violet (AV) and rhodamine red (RR) basic dyes. CD increased sharply with an increase in GY and tended to level off at higher degrees of grafting. The best dyeing conditions were achieved for both dyes at pH 11.5. CD of the grafted fabric increased rapidly as the dyeing time increased; this was followed by a relatively slow dyeing rate within a few minutes, which depended on the concentration and temperature of the dye bath. The initial dyeing rates and rate constants for the AV dye were higher than those for the RR dye. The dyeing process followed 0.14‐order kinetics and was independent of the dyeing temperature or the type of dye. The dyeing rates and rate constants increased with an increase in the dyeing temperature. An Arrhenius‐type plot of the natural logarithm of the dyeing rate constant versus the inverse of the absolute temperature yielded apparent activation energies of 4.9 and 13.8 kJ/mol and pre‐exponential rate constants of 9.4 and 100.6 (CD/GY)s^?1 for the AV and RR dyes, respectively. The mechanism of the dyeing process for the two dyes was diffusion‐controlled, and their dyeing rates depended on the type of basic dye. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1070–1076, 2004     

Thermal stability of radiation‐grafted and dyed poly(ethylene terephthalate) fabric

The effect of degree of grafting (GY) and degree of dye uptake on the thermal stability of polyethylene terephthalate (PET) fabric was studied using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and X‐ray diffraction analysis (XDA). TGA showed that the degradation process was composed of three overlapping stages. The first and second stages were studied in detail. Methacrylic acid (MAA)‐grafted PET fabric was dyed using Rhodamine Red (RR) and Astrazonrot Violet (AV) basic dyes. It was found that grafting deteriorated the thermal stability of both stages. The first stage showed the formation of two new steps at low and high temperatures. Both steps are heating rate and graft yield dependent. The deteriorating effect of grafting was followed by the changes in the kinetic parameters. AV dyeing of grafted samples accelerated the degradation of both stages whereas RR dyeing improved the thermal stability to reach that of ungrafted fabric. XDA showed that the crystalline nature of AV dye stuff is responsible for the rapid degradation in both stages via the introduction of highly incompatible crystalline phase in the polymer back bone, which resulted in the formation of internal stresses that enhanced the degradation process. DSC measurements supported TGA results. The improvement in the thermal stability by RR dyeing is attributed to the amorphous nature and the high thermal stability of the RR dye stuff. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101:1007–1020, 2006     

Kinetics study of radiation‐grafting of acrylic acid,acrylonitrile, and their mixture onto wool fabric

The effect of monomer concentration, exposure time, irradiation temperature, and weaving direction on the kinetics of grafting acrylic acid (AA), acrylonitrile (AN), and their mixture onto wool fabric has been studied at the dose rate of 1.38 Gy/s. The degree of grafting is found to depend on the methanol‐to‐water solvent ratio and fabric‐to‐liquor ratio. The grafting rate and rate constant are dependent on irradiation temperature, type of grafted monomer, and weaving direction. The grafting rates increase with the increase in irradiation temperature (276–308 K). The calculated activation energy is nearly the same (16.4–17.2 kJ mol^?1) and the preexponential rate constant is dependent on the type of grafted monomer. The grafting of AA, AN, and their mixture are confirmed from the dyeing affinity of grafted fabrics towards Sandocryl Blue (SB), a basic dye. The formation of wool grafts and structural changes resulting from grafting were verified by using FTIR spectrometry and X‐ray diffraction analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4328–4340, 2006     

Surface grafting polymerization of N‐vinyl‐2‐pyrrolidone onto a poly(ethylene terephthalate) nonwoven by plasma pretreatment and its antibacterial activities

The objective of this research was the surface grafting polymerization of biocompatible monomer N‐vinyl‐2‐pyrrolidone (NVP) onto a plasma‐treated nonwoven poly(ethylene terephthalate) (PET) substrate with ultraviolet (UV)‐induced methods. The effects of various parameters, such as the monomer concentration, reaction time, initiator (ammonium peroxodisulfate) concentration, and crosslinking agent (N,N′‐methylene bisacrylamide) concentration, on the grafting percentage were studied. The grafting efficiency of the modified nonwoven PET surfaces reached a maximum at 50 min of UV irradiation and with a 30 wt % aqueous NVP solution. After the plasma activation and/or grafting, the hydrophobic surface of the nonwoven was modified into a hydrophilic surface. NVP was successfully grafted onto nonwoven PET surfaces. The surface wettability showed that the water absorption of NVP‐grafted nonwoven PET (NVP‐g‐nonwoven PET) increased with increasing grafting time. NVP‐g‐nonwoven PET was verified by Fourier transform infrared spectra and scanning electron microscopy measurements. An antibacterial assessment using an anti‐Staphylococcus aureus test indicated that S. aureus was restrained from growing in NVP‐g‐nonwoven PET. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 803–809, 2006     

Biodegradable amphiphiles of grafted poly(lactide) onto 2‐hydroxyethyl methacrylate‐co‐N‐vinylpyrrolidone copolymers as drug carriers

This article describes the synthesis and characterization of 2‐hydroxylethyl methacrylate‐co‐N‐vinylpyrrolidone copolymers, (HEMA‐co‐NVP), via free radical polymerization followed by grafting of poly(lactide) onto (HEMA‐co‐NVP) copolymers, via ring opening polymerization using tin octoate as a catalyst. The copolymers and the grafted copolymers (i.e., amphiphiles) were subjected to sustained release studies using salicylic acid, as a model drug. Characterization of the formed copolymers was performed using ¹H‐NMR, ¹³C‐NMR, FTIR, TGA, DSC, and SEM techniques. Derivative of TGA thermogram was used to determine %hydrophilicity and %hydrophobicity in the grafted and ungrafted copolymers. The SEM morphology revealed porous layers with crispy structure that were most likely due to the presence of poly(lactide) chains. At lower content of poly(lactide) moiety, grafted copolymers showed non‐Fickian diffusion release rate, whereas Fickian diffusion release rate at higher content of poly(lactide) was observed. The increase of poly(lactide) content (i.e., larger %hydrophobicity) in the copolymer increased the drug‐sustainability, due to the consistent but porous amphiphilic degradable structures that allow controllable release of drug in time interval. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Processes involved during radiation grafting of N‐vinyl pyrrolidone onto poly(ethylene terephthatate) fabric

Kinetics of radiation grafting of N‐vinyl pyrrolidone (NVP) onto poly(ethylene terephthalate) (PET) fabric revealed the existence of four different processes. These are as follows: the grafting, the homopolymerization, the degradation, and the diffusion. The grafting process was followed by the increase in weight with the increase in irradiation time (t), while the homopolymerization and the degradation processes were evaluated from changes in the square root of the specific viscosity of the irradiated monomer solution (√η_sp) with the increase in t. All processes were carried out at different NVP concentrations, different irradiation temperatures (T), and a dose rate 1.31 Gy s^?1. All processes followed first‐order kinetics except the degradation process that followed a 0.6‐order. The rate (R) and rate constant (k) of grafting and diffusion processes were found to increase with the increase in T, while the homopolymerization and degradation processes showed negative temperature dependence. The sum of R of the four processes was proportional to the initial NVP concentration, while k of the four processes was independent of T and has a value of 0.674 min^?1. The respective apparent activation energies of 24.0, 6.24, 6.84, and 2.5 kJ mol^?1 were calculated for the four processes. The NVP molecules participated in each process and their energies were evaluated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3009–3022, 2006     

Functional finishing by using atmospheric pressure plasma: Grafting of PET nonwoven fabric

Poly (ethylene terephtalate) (PET) nonwoven fabric was treated with He/O₂ plasma to produce peroxides and grafted with acrylic acid (AA) for introducing carboxyl groups onto PET surface. The graft yield increased with AA concentration from 1.5M to 2.5M, and then decreased with further increase in AA concentration. Graft yield increased with sodium pyrosulfite (SPS) concentration from 0.005M to 0.02M, and then decreased with further increase of SPS concentration. X‐ray photoelectron spectroscopy results indicated that both of plasma treatment and AA grafting increased oxygen content and decreased carbon content on the PET nonwoven fabric surface. The grafted PET nonwoven fabric showed increase in moisture regain and dye uptake. And drastic increase in wettability was observed after grafting. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3655–3659, 2007     

A pH‐sensitive porous chitosan membrane prepared via surface grafting copolymerization in supercritical carbon dioxide

We report the successful grafting copolymerization of acrylic acid (AA) on a crosslinked porous chitosan membrane in supercritical carbon dioxide at pressures ranging from 13 to 25 MPa with the use of benzyl peroxide (BPO) as the reduction–oxidation free radical initiator. The effects of reaction pressure, initiator concentration, monomer concentration, reaction temperature and reaction time on grafting yield (GY) were investigated. GY initially increases and then decreases with increasing polymerization temperature and AA and BPO concentrations. The optimum grafting conditions to obtain maximum GY are as follows: 8 h reaction time, 80 °C reaction temperature, 3.05 × 10^?2 g mL^?1 AA concentration, 3 × 10^?3 g mL^?1 BPO concentration and 16 MPa reaction pressure. The water flux of the grafted chitosan membranes decreases with pH from 2 to 7, even at considerably low GY (0.95 wt%). A novel and green modification method has been developed for the preparation of biopolymer‐based membranes. © 2014 Society of Chemical Industry     

Swelling behavior and cell viability of dehydrothermally crosslinked poly(vinyl alcohol) hydrogel grafted with N‐vinyl pyrrolidone or acrylic acid using γ‐radiation

To improve equilibrium water content, dehydrothermally crosslinked poly(vinyl alcohol) (PVA) hydrogel was grafted with N‐vinyl pyrrolidone (NVP) or acrylic acid (AA) monomer using γ‐radiation. Swelling behavior of the grafted hydrogels was studied in phosphate‐buffered saline, and cell viability was evaluated using fibroblast cells from mouse connective tissue. Equilibrium water content of AA‐ and NVP‐grafted PVA hydrogel ranged between 40–60% and 60–80%, respectively, depending on radiation dose and monomer concentration. For maximum degree of swelling, the optimum monomer concentration and radiation dose were 20% by weight and 20 kGy, respectively. Fibroblast cells seeded on NVP‐grafted hydrogel had an extended oval morphology while those seeded on AA‐grafted PVA had a rounded spherical morphology. These results support the use of NVP for grafting PVA to increase swelling and improve cell viability. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2862–2868, 2004     

The colour properties of polyester/cotton knitted fabrics coated with poly(N‐vinyl‐2‐pyrrolidone)

The objective of this research was to investigate the use of crosslinked poly(N‐vinyl‐2‐pyrrolidone) (PVP) to coat polyester/cotton knitted fabric, without adversely affecting its dyeing properties. Before dyeing, the knitted fabrics were tested for bursting strength to assess the influence of the coating on their resistance. The dyeing parameters were evaluated as the exhaustion (%), K/S value, colour difference (ΔE), relative strength (RS %) and colour fastness to washing. Bursting strengths were 9.4 for coated and 9.7 kgf cm^?2 for uncoated knitted fabric samples, confirming an insignificant loss in resistance. In the evaluation of K/S, ΔE and RS%, the values for the samples with the highest concentration of PVP were the most different to those for the standard sample. The colour fastness showed satisfactory results indicating that neutralisation and washing after dyeing were effective. These results could lead to increased quality in the textile industry, adding value to products.     

Dyeing of chrome tanned collagen modified by in situ grafting with 2‐EHA and MAC

The aim of this study deals with the modification of the chrome tanned collagen (leather) by in situ grafting with 2‐ethyl hexyl acrylate (2‐EHA) and methacrylic acid (MAC) to improve its dyeability using Amecid Floxine 2GN (C.I. Acid Red 1) and Remazol Black B (C.I. Reactive Black 5). The optimum condition of in situ grafting has been evaluated. FTIR spectra of the ungrafted and the in situ grafted chrome tanned collagen showed that the corresponding band of the acrylate carbonyl ester occurs at 1730–1735 cm^?1 when compared with the ungrafted ones. The colorimetric data of the in situ grafted and dyed samples exhibited improvement in color shade, dye bath exhaustion, wash and light fastness relative to the ungrafted and dyed ones. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 174–179, 2006     

Radiation grafting of acrylic acid/N‐vinyl pyrrolidone binary mixture onto poly(ethylene terephthalate) fabric and growth of human mesenchymal stem cell

Radiation grafting of acrylic acid (AA)/N‐vinyl pyrrolidone (NVP) binary mixture onto poly(ethylene terephthalate) (PET) knittings was investigated by preirradiation technique. The influence of the grafting conditions, such as monomer composition, reaction temperature, and the effect of storage time with temperature after irradiation on the degree of grafting was determined. ATR‐FTIR spectroscopy analysis of the grafted knittings confirmed the existence of amide group of NVP in the knittings. The concentration of peroxides and effect of storage time on peroxide concentration were also determined by 2,2‐Diphenyl‐1‐picrylhydrazyl at different temperatures. There was an increase in surface roughness of grafted PET in comparison to virgin PET as determined by atomic force microscopy and scanning electron microscopy. The grafted knittings were subsequently immobilized with collagen Type I which was further apt for the study of growth and morphology of human mesenchymal stem cell (hMSC). The immobilization of collagen on PET knittings has provided an excellent surface for the growth of hMSCs. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Surface characterization and antibacterial activity of chitosan‐grafted poly(ethylene terephthalate) prepared by plasma glow discharge

Poly(ethylene terephthalate) (PET) texture was exposed to oxygen plasma glow discharge to produce peroxides on its surfaces. These peroxides were then used as catalysts for the polymerization of acrylic acid (AA) in order to prepare a PET introduced by a carboxylic acid group (PET‐A). Chitosan and quaternized chitosan (QC) were then coupled with the carboxyl groups on the PET‐A to obtain chitosan‐grafted PET (PET‐A‐C) and QC‐grafted PET (PET‐A‐QC), respectively. These surface‐modified PETs were characterized by attenuated total reflection Fourier transform IR spectroscopy, electron spectroscopy for chemical analysis, and a contact angle goniometer. The amounts of AA, chitosan, and QC grafted on the PET surfaces as determined by the gravimetric method were about 6, 8, and 9 μg/cm², respectively. The antibacterial activity of the surface‐modified PET textures was investigated using a shake flask method. After 6 h of shaking, the growth of bacteria was markedly inhibited by PET with ionically (86% in PET‐A^?‐C⁺) and covalently (75% in PET‐A‐C) grafted chitosan and with covalently grafted QC (83% in PET‐A‐QC). After the laundering the inhibition of the growth of the bacteria was maintained in the range of 48–58%, showing the fastness of the chitosan‐grafted PET textures against laundering. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2769–2778, 2001     

Modification of jute fabric via laccase/t‐BHP‐mediated graft polymerization with acrylamide

Enzymatic processes provide new perspectives for the modification of lignocellulose materials. Lignin is an excellent substrate for laccase, and the modification of lignin‐rich jute fabric via graft polymerization with acrylamide (AAm) mediated by laccase and tert‐butyl hydroperoxide (t‐BHP) was investigated in this study. The products obtained were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The grafting rate was determined in terms of elemental analysis. The hydrophilicity and thermal and dyeing properties of the modified jute fabric were studied. The results supported the conclusion that the polyacrylamide was grafted on the lignin of the jute fiber by laccase in coordination with t‐BHP, representing a grafting rate of 2.87%. The hydrophilicity, thermostability, dye uptake, and dyeing depth of the jute fiber were increased after the enzymatic graft modification with AAm. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40387.     

RAFT polymerization of N‐vinyl pyrrolidone using prop‐2‐ynyl morpholine‐4‐carbodithioate as a new chain transfer agent

RAFT polymerization of N‐vinyl pyrrolidone (NVP) has been investigated in the presence of chain transfer agent (CTA), i.e., prop‐2‐ynyl morpholine‐4‐carbodithioate (PMDC). The influence of reaction parameters such as monomer concentration [NVP], molar ratio of [CTA]/[AIBN, i.e., 2,2′‐azobis (2‐methylpropionitrile)] and [NVP]/[CTA], and temperature have been studied with regard to time and conversion limit. This study evidences the parameters leading to an excellent control of molecular weight and molar mass dispersity. NVP has been polymerized by maintaining molar ratio [NVP]: [PMDC]: [AIBN] = 100 : 1 : 0.2. Kinetics of the reaction was strongly influenced by both temperature and [CTA]/[AIBN] ratio and to a lesser extent by monomer concentration. The activation energy (E_a = 31.02 kJ mol^?1) and enthalpy of activation (ΔH^?= 28.29 kJ mol^?1) was in a good agreement to each other. The negative entropy of activation (ΔS^? = ?210.16 J mol^‐1K^‐1) shows that the movement of reactants are highly restricted at transition state during polymerization. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and application of glycidyl methacrylate and methacrylic acid monomer mixture‐grafted poly(ethylene terephthalate) fibers for removal of methylene blue from aqueous solution

A novel fibrous adsorbent that grafts glycidyl methacrylate (GMA) and methacrylic acid (MAA) monomer mixture onto poly(ethylene terephthalate) (PET) fibers was used for removal of methylene blue (MB) in aqueous solutions by a batch equilibration technique. The operation parameters investigated included, pH of solution, removal time, graft yield, dye concentration, and reaction temperature. The adsorption rate of MB is much higher on the MAA/GMA‐grafted PET fibers than on the ungrafted PET fibers. MB was removed 99% the initial dye concentration at 10 mg L⁻¹ and 93% at 200 mg L⁻¹ by monomers mixture‐grafted PET fibers. Pseudofirst order and pseudosecond order kinetic equations were used to examine the experimental data of different graft yield. It was found that the pseudosecond order kinetic equation described the data of dye adsorption on fibrous adsorbent very well. The experimental isotherms data were analyzed using Langmuir and Freundlich isotherm models. The data was that Freundlich isotherm model fits the data very well for the dyes on the fibers adsorbent. The dye adsorbed was easily desorbed by treating with acetic acid/methanol mixture (50% V/V) at room temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Lipases improve the grafting of poly(ethylene terephthalate) fabrics with acrylic acid

In this study, poly(ethylene terephthalate) (PET) fabrics were modified with two types of commercial lipases, namely, Lipex and Lipolase, and grafted with acrylic acid (AA) to improve their absorption properties. The effects of the enzyme concentration, reaction temperature, time, and pH on the grafting of AA onto PET were investigated. The pretreatment of PET with lipases increased the amount of AA that was introduced to the PET fibers, whereas AA grafting onto the untreated PET fabrics led to lower graft yields. Fourier transform infrared spectroscopy and scanning electron microscopy were used to characterize the AA‐grafted pretreated polyester fabrics. A new band appearing at 1546 cm^?1 in the Fourier transform infrared spectrum implied that AA was introduced onto the PET fabrics. The surfaces of the fabric fibers presented in scanning electron microscopy micrographs clearly indicated the formation of a layer of grafted poly (acrylic acid). The results show that the density of surface grafting was improved by the lipase pretreatment. The increase in grafting was higher for Lipex than for Lipolase. The highest graft yield was obtained with 1% Lipex and Lipolase for 30 min at pH values of 7 and 5, respectively. There were no significant changes in the tenacity or weight reduction of the fabrics. The moisture content of the samples increased linearly with increasing graft yield. This was higher for the pretreated fabrics grafted with Lipex. A higher color strength was obtained for grafted PET samples that were pretreated with Lipex when they were dyed in alkaline aqueous solutions. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Fabrication of speedy and super‐water‐absorbing non‐woven cloth with hierarchical three‐dimensional network structure

A novel speedy and super‐water‐absorbing non‐woven cloth with hierarchical three‐dimensional network (3D‐SS‐PET) was fabricated through the induction of UV copolymerization on polyethylene terephthalate (PET) fibers followed by a volume phase transition. The macroscopic three‐dimensional network implied that the PET non‐woven substrates are complicated three‐dimensional fibrous materials including oriented fibers in preferential or random directions. The microscopic three‐dimensional network is poly(acrylic acid‐co‐acrylamide) (poly(AA‐co‐AM)) crosslinked copolymer layers on the fiber surface. The rapid volume phase transition was achieved by immersing the swelled non‐woven poly(AA‐co‐AM) modified PET (PET‐g‐AA‐co‐AM) in ethanol. The above process was an essential step to prepare the copolymer chain; after that the fiber surface was extended to form abundant capillary channels and plenty of space between fibers. The water contact angle decreased remarkably from 130° to 0°, while the absorbing capacity of the saturated water and the average water‐absorbing rate experienced an increasing trend, rising from 300 to 324.6 g g^?1 in 24 h and 18.6 and 222 g (g min)^?1 in 40 s, respectively. It was concluded that surface hydrophilicity and capillaries of the hydrophilic modified macroscopic fibrous structure enhanced the water‐absorbing rate and the swelling process contributed to the higher water absorption capacity. This speedy and super‐water‐absorbing material exhibits great potentiality in diapers, sanitary napkins, wound dressings, surgical pads, and hygroscopic and sweat‐free underwear in extremely cold areas. © 2018 Society of Chemical Industry     

An investigation of the flocculation characteristics of polyacrylamide‐grafted chitosan

To investigate the flocculation characteristics of polyacrylamide (PAM)‐grafted chitosan, a series of PAM‐grafted chitosan copolymer (Chito‐g‐PAM1 to Chito‐g‐PAM4) have been synthesized by ceric ammonium nitrate‐induced solution polymerization technique in nitrogen atmosphere. The flocculation characteristics of the polymer samples (PAM, grafted and ungrafted chitosan) were studied by settling test and jar test methods in the colloidal suspensions of kaolin, iron ore, silica, and bentonite powder. It was found that the settling performance of Chito‐g‐PAM3 is best among the polymer samples. The jar test results indicate that the ungrafted chitosan has better water clarifying performance than both the PAM and grafted chitosan. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Studies on acrylic acid–grafted polyester fabrics by electron beam preirradiation method. I. Effects of process parameters on graft ratio and characterization of grafting products

Polyester fabrics were preirradiated by electron beam in air and then grafted by acrylic acid (AA) without excluding oxygen. Effects of preirradiation dose, monomer concentration, reaction temperature, storage time, sulfuric acid, and Mohr's salt were investigated in detail and are discussed. The results suggest that it is practicable and effective to graft AA onto polyester fabrics by means of the preirradiation method. FTIR and SEM were used to characterize AA‐grafted polyester fabrics. A new band appearing at 1546 cm^?1 in the FTIR spectrum implies that AA was indeed introduced onto PET macromolecules. Changes of the diameter and the surface structure of fabric fibers presented in SEM micrographs make it clear that a layer of grafted poly(acrylic acid) was formed on the surface of these PET fibers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3931–3938, 2003