Adaptive neuro-fuzzy inference system modeling of cryogenically treated AISI M2 HSS turning tool for estimation of flank wear

This study deals with modeling the flank wear of cryogenically treated AISI M2 high speed steel (HSS) tool by means of adaptive neuro-fuzzy inference system (ANFIS) approach. Cryogenic treatment has recently been found to be an innovative technique to improve wear resistance of AISI M2 HSS tools but precise modelling approach which also incorporates the cryogenic soaking temperature to simulate the tool flank wear is still not reported in any open literature. In order to obtain data for developing the ANFIS model, turning of hot rolled annealed steel stock (C-45) by cryogenically treated tools treated at various cryogenic soaking temperatures was performed in steady state conditions while varying the cutting speed and cutting time. The model combined modeling function of fuzzy inference with the learning ability of artificial neural network; and a set of rules has been generated directly from experimental data. It was determined that the predictions usually agreed well with the experimental data with correlation coefficients of 0.994 and mean errors of 2.47%. The proposed model can also be used for estimating tool flank wear on-line but the accuracy of the model depends upon the proper training and selection of data points.     

Monitoring the tool wear,surface roughness and chip formation occurrences using multiple sensors in turning

Tool wear, chip formation and surface roughness of workpiece under different cutting conditions have been investigated in machining using acoustic emission (AE) and vibration signature in turning. The investigation has shown that the AE and vibration components can effectively respond to the different occurrences in turning including tool wear and surface roughness. The AE has shown a very significant response to the tool wear progression whereas the resultant vibration (V) represented the surface roughness in turning. The vibration components V_x, V_y and V_z described the chip formation type and are found to have the most significant response to the change of feed, depth of cut and cutting speed respectively. The amplitude of vibration components, V_x, V_y and V_z increased with the increase of feed rate, depth of cut and cutting speed respectively. Even though the frequency of different signal components fluctuated at the different stages of tool wear and at different cutting conditions, the frequency of vibration components was always within a band of 98–40 kHz, and the AE has varied between 51 kHz and 620 kHz.