Multi‐material incompressible flow simulation using the moment‐of‐fluid method

This paper compares the numerical performance of the moment‐of‐fluid (MOF) interface reconstruction technique with Youngs, LVIRA, power diagram (PD), and Swartz interface reconstruction techniques in the context of a volume‐of‐fluid (VOF) based finite element projection method for the numerical simulation of variable‐density incompressible viscous flows. In pure advection tests with multiple materials MOF shows dramatic improvements in accuracy compared with the other methods. In incompressible flows where density differences determine the flow evolution, all the methods perform similarly for two material flows on structured grids. On unstructured grids, the second‐order MOF, LVIRA, and Swartz methods perform similarly and show improvement over the first‐order Youngs' and PD methods. For flow simulations with more than two materials, MOF shows increased accuracy in interface positions on coarse meshes. In most cases, the convergence and accuracy of the computed flow solution was not strongly affected by interface reconstruction method. Published in 2009 by John Wiley & Sons, Ltd.     

A solution adaptive simulation of compressible multi‐fluid flows with general equation of state

The unstructured quadrilateral mesh‐based solution adaptive method is proposed in this article for simulation of compressible multi‐fluid flows with a general form of equation of state (EOS). The five equation model (J. Comput. Phys. 2002; 118 :577–616) is employed to describe the compressible multi‐fluid flows. To preserve the oscillation‐free property of velocity and pressure across the interface, the non‐conservative transport equation is discretized in a compatible way of the HLLC scheme for the conservative Euler equations on the unstructured quadrilateral cell‐based adaptive mesh. Five numerical examples, including an interface translation problem, a shock tube problem with two fluids, a solid impact problem, a two‐dimensional Riemann problem and a bubble explosion under free surface, are used to examine its performance in solving the various compressible multi‐fluid flow problems with either the same types of EOS or different types of EOS. The results are compared with those calculated by the following methods: the method with ROE scheme (J. Comput. Phys. 2002; 118 :577–616), the seven equation model (J. Comput. Phys. 1999; 150 :425–467), Shyue's fluid‐mixture model (J. Comput. Phys. 2001; 171 :678–707) or the method in Liu et al. (Comp. Fluids 2001; 30 :315–337). The comparisons for the test problems show that the proposed method seems to be more accurate than the method in Allaire et al. (J. Comput. Phys. 2002; 118 :577–616) or the seven‐equation model (J. Comput. Phys. 1999; 150 :425–467). They also show that it can adaptively and accurately solve these compressible multi‐fluid problems and preserve the oscillation‐free property of pressure and velocity across the material interface. Copyright © 2010 John Wiley & Sons, Ltd.     

Numerical errors of the volume‐of‐fluid interface tracking algorithm

One of the important limitations of the interface tracking algorithms is that they can be used only as long as the local computational grid density allows surface tracking. In a dispersed flow, where the dimensions of the particular fluid parts are comparable or smaller than the grid spacing, several numerical and reconstruction errors become considerable. In this paper the analysis of the interface tracking errors is performed for the volume‐of‐fluid method with the least squares volume of fluid interface reconstruction algorithm. A few simple two‐fluid benchmarks are proposed for the investigation of the interface tracking grid dependence. The expression based on the gradient of the volume fraction variable is introduced for the estimation of the reconstruction correctness and can be used for the activation of an adaptive mesh refinement algorithm. Copyright © 2002 John Wiley & Sons, Ltd.     

A local grid refinement method for three‐dimensional turbulent recirculating flows

A local grid refinement method is presented and applied to a three‐dimensional turbulent recirculating flow. It is based on the staggered grid arrangement. The computational domain is covered by block‐structured subgrids of different refinement levels. The exchange of information between the subgrids is fully conservative and all grids are treated implicitly. This allows for a simultaneous solution of one variable in all grids. All variables are stored in one‐dimensional arrays. The solver selected for the solution of the discretised finite difference equations is the preconditioned bi‐conjugate gradient (Bi‐CG) method. For the case examined (turbulent flow around a surface‐mounted cube), it was found that the latter method converges faster than the line solver. The locally refined mesh improved the accuracy of the pressure distribution on cube faces compared with a coarse mesh and yielded the same results as a fine single mesh, with a 62% gain in computer time. Copyright © 1999 John Wiley & Sons, Ltd.     

An adaptive numerical scheme for solving incompressible 2‐phase and free‐surface flows

In this paper, we present a numerical scheme for solving 2‐phase or free‐surface flows. Here, the interface/free surface is modeled using the level‐set formulation, and the underlying mesh is adapted at each iteration of the flow solver. This adaptation allows us to obtain a precise approximation for the interface/free‐surface location. In addition, it enables us to solve the time‐discretized fluid equation only in the fluid domain in the case of free‐surface problems. Fluids here are considered incompressible. Therefore, their motion is described by the incompressible Navier‐Stokes equation, which is temporally discretized using the method of characteristics and is solved at each time iteration by a first‐order Lagrange‐Galerkin method. The level‐set function representing the interface/free surface satisfies an advection equation that is also solved using the method of characteristics. The algorithm is completed by some intermediate steps like the construction of a convenient initial level‐set function (redistancing) as well as the construction of a convenient flow for the level‐set advection equation. Numerical results are presented for both bifluid and free‐surface problems.     

Effects of element order and interface reconstruction in FEM/volume‐of‐fluid incompressible flow simulation

In previous studies, the moment‐of‐fluid interface reconstruction method showed dramatic accuracy improvements in static and pure advection tests over existing methods, but this did not translate into an equivalent improvement in volume‐tracked multimaterial incompressible flow simulation using low‐order finite elements. In this work, the combined effects of the spatial discretization and interface reconstruction in flow simulation are examined. The mixed finite element pairs, Q₁Q₀ (with pressure stabilization) and Q₂P _{? 1} are compared. Material order‐dependent and material order‐independent first and second‐order accurate interface reconstruction methods are used. The Q₂P _{? 1} elements show significant improvements in computed flow solution accuracy for single material flows but show reduced convergence using element‐average piecewise constant density and viscosity in volume‐tracked simulations. In general, a refined Q₁Q₀ grid, with better material interface resolution, provided an accuracy similar to the Q₂P _{? 1} element grid with a comparable number of degrees of freedom. Moment‐of‐fluid shows more benefit from the higher‐order accurate flow simulation than the LVIRA, Youngs', and power diagram interface reconstruction methods, especially on unstructured grids, but does not recover the dramatic accuracy improvements it has shown in advection tests. Published 2012. This article is a US Government work and is in the public domain in the USA.     

A hybrid scheme based on finite element/volume methods for two immiscible fluid flows

We have successfully extended our implicit hybrid finite element/volume (FE/FV) solver to flows involving two immiscible fluids. The solver is based on the segregated pressure correction or projection method on staggered unstructured hybrid meshes. An intermediate velocity field is first obtained by solving the momentum equations with the matrix‐free implicit cell‐centered FV method. The pressure Poisson equation is solved by the node‐based Galerkin FE method for an auxiliary variable. The auxiliary variable is used to update the velocity field and the pressure field. The pressure field is carefully updated by taking into account the velocity divergence field. This updating strategy can be rigorously proven to be able to eliminate the unphysical pressure boundary layer and is crucial for the correct temporal convergence rate. Our current staggered‐mesh scheme is distinct from other conventional ones in that we store the velocity components at cell centers and the auxiliary variable at vertices. The fluid interface is captured by solving an advection equation for the volume fraction of one of the fluids. The same matrix‐free FV method, as the one used for momentum equations, is used to solve the advection equation. We will focus on the interface sharpening strategy to minimize the smearing of the interface over time. We have developed and implemented a global mass conservation algorithm that enforces the conservation of the mass for each fluid. Copyright © 2009 John Wiley & Sons, Ltd.     

An adaptive multilevel wavelet framework for scale‐selective WENO reconstruction schemes

We put forth a dynamic computing framework for scale‐selective adaptation of weighted essential nonoscillatory (WENO) schemes for the simulation of hyperbolic conservation laws exhibiting strong discontinuities. A multilevel wavelet‐based multiresolution procedure, embedded in a conservative finite volume formulation, is used for a twofold purpose. (i) a dynamic grid adaptation of the solution field for redistributing grid points optimally (in some sense) according to the underlying flow structures, and (ii) a dynamic minimization of the in built artificial dissipation of WENO schemes. Taking advantage of the structure detection properties of this multiresolution algorithm, the nonlinear weights of the conventional WENO implementation are selectively modified to ensure lower dissipation in smoother areas. This modification is implemented through a linear transition from the fifth‐order upwind stencil at the coarsest regions of the adaptive grid to a fully nonlinear fifth‐order WENO scheme at areas of high irregularity. Therefore, our computing algorithm consists of a dynamic grid adaptation strategy, a scale‐selective state reconstruction, a conservative flux calculation, and a total variation diminishing Runge‐Kutta scheme for time advancement. Results are presented for canonical examples drawn from the inviscid Burgers, shallow water, Euler, and magnetohydrodynamic equations. Our findings represent a novel direction for providing a scale‐selective dissipation process without a compromise on shock capturing behavior for conservation laws, which would be a strong contender for dynamic implicit large eddy simulation approaches.     

An improved unstructured WENO method for compressible multi‐fluids flow

An improved high‐order accurate WENO finite volume method based on unstructured grids for compressible multi‐fluids flow is proposed in this paper. The third‐order accuracy WENO finite volume method based on triangle cell is used to discretize the governing equations. To have higher order of accuracy, the P1 polynomial is reconstructed firstly. After that, the P2 polynomial is reconstructed from the combination of the P1. The reconstructed coefficients are calculated by analytical form of inverse matrix rather than the numerical inversion. This greatly improved the efficiency and the robustness. Four examples are presented to examine this algorithm. Numerical results show that there is no spurious oscillation of velocity and pressure across the interface and high‐order accurate result can be achieved. Copyright © 2016 John Wiley & Sons, Ltd.     

Development of a hybrid particle‐mesh method for two‐phase flow simulations

A hybrid particle‐mesh method was developed for efficient and accurate simulations of two‐phase flows. In this method, the main component of the flow is solved using the constrained interpolated profile/multi‐moment finite volumemethod; the two‐phase interface is rendered using the finite volume particle (FVP) method. The effect of surface tension is evaluated using the continuum surface force model. Numerical particles in the FVP method are distributed only on the surface of the liquid in simulating the interface between liquid and gas; these particles are used to determine the density of each mesh grid. An artificial term was also introduced to mitigate particle clustering in the direction of maximum compression and sparse discretization errors in the stretched direction. This enables accurate interface tracking without diminishing numerical efficiency. Two benchmark simulations are used to demonstrate the validity of the method developed and its numerical stability. Copyright © 2016 John Wiley & Sons, Ltd.     

Numerical simulation of fluid flows using an unstructured finite volume method with adaptive tri‐tree grids

A tri‐tree grid generation procedure is developed together with a finite volume method on the unstructured grid for solving the Navier–Stokes equations. A hierarchic numbering system for the data structure is used. The grid is adapted by adding and removing cell elements dependent on the vorticity magnitude. A special treatment is developed to ensure good quality triangular elements around the cylinder boundary. The adopted finite volume method is based on the cell‐centred scheme. The pressure–velocity coupling is treated using the SIMPLE algorithm. A modified QUICK scheme for unstructured grids is derived. The developed method is used to simulate the flow past a single and multiple cylinders at low Reynolds number. The obtained results are in good agreement with the published data. Copyright © 2002 John Wiley & Sons, Ltd.     

A hybrid FVM–LBM method for single and multi‐fluid compressible flow problems

The lattice Boltzmann method (LBM) has established itself as an alternative approach to solve the fluid flow equations. In this work we combine LBM with the conventional finite volume method (FVM), and propose a non‐iterative hybrid method for the simulation of compressible flows. LBM is used to calculate the inter‐cell face fluxes and FVM is used to calculate the node parameters. The hybrid method is benchmarked for several one‐dimensional and two‐dimensional test cases. The results obtained by the hybrid method show a steeper and more accurate shock profile as compared with the results obtained by the widely used Godunov scheme or by a representative flux vector splitting scheme. Additional features of the proposed scheme are that it can be implemented on a non‐uniform grid, study of multi‐fluid problems is possible, and it is easily extendable to multi‐dimensions. These features have been demonstrated in this work. The proposed method is therefore robust and can possibly be applied to a variety of compressible flow situations. Copyright © 2009 John Wiley & Sons, Ltd.     

Three‐dimensional finite element analysis of transient fluid flow with free‐surface using marker surface method and adaptive grid refinement

For three‐dimensional finite element analysis of transient fluid flow with free‐surface, a new marker surface method is proposed, in which the fluid flow is represented by the marker surface composed of marker elements instead of marker particles used in the marker particle method. This also involves an adaptive grid that is created under a new criterion of element categorization of filling states and the locations in the total region at each time step. The marker surface is used in order to represent the free‐surface accurately, as well as to decrease the memory and computation time, and to effectively display the predicted three‐dimensional free‐surface. By using the adaptive grid in which the elements, finer than those in internal and external regions, are distributed in the surface region through refinement and coarsening procedures, the analysis of three‐dimensional transient fluid flow with free‐surface is achieved more efficiently. Through three‐dimensional analysis of two kinds of problems using several grids, the efficiency of the proposed marker surface method and the adaptive grid are verified. Copyright © 1999 John Wiley & Sons, Ltd.     

Anisotropic mesh refinement for discontinuous Galerkin methods in two‐dimensional aerodynamic flow simulations

We derive and implement two types of anisotropic indicators which can be used within an anisotropic refinement algorithm for second but also for higher‐order discontinuous Galerkin discretizations. Although the first type of indicator employs the possible inter‐element discontinuities of the discrete functions, the second type of indicator estimates the approximation error in terms of second but possibly also higher‐order derivatives. We implement a simple extension of these indicators to systems of equations which performs similar to the so‐called metric intersection used to combine the metric information of several solution components and is applicable to higher‐order discretizations as well. The anisotropic indicators are incorporated into an adaptive refinement algorithm which uses state‐of‐the‐art residual‐based or adjoint‐based indicators for goal‐oriented refinement to select the elements to be refined, whereas the anisotropic indicators determine which anisotropic case the selected elements shall be refined with. We demonstrate the performance of the anisotropic refinement algorithm for sub‐, trans‐ and supersonic, inviscid and viscous compressible flows around a NACA0012 airfoil. Copyright © 2007 John Wiley & Sons, Ltd.     

An immersed‐boundary finite‐volume method for direct simulation of flows with suspended paramagnetic particles

In the present study, we have proposed an immersed‐boundary finite‐volume method for the direct numerical simulation of flows with inertialess paramagnetic particles suspended in a nonmagnetic fluid under an external magnetic field without the need for any model such as the dipole–dipole interaction. In the proposed method, the magnetic field (or force) is described by the numerical solution of the Maxwell equation without current, where the smoothed representation technique is employed to tackle the discontinuity of magnetic permeability across the particle–fluid interface. The flow field, on the other hand, is described by the solution of the continuity and momentum equations, where the discrete‐forcing‐based immersed‐boundary method is employed to satisfy the no‐slip condition at the interface. To validate the method, we performed numerical simulations on the two‐dimensional motion of two and three paramagnetic particles in a nonmagnetic fluid subjected to an external uniform magnetic field and then compared the results with the existing finite‐element and semi‐analytical solutions. Comparison shows that the proposed method is robust in the direct simulation of such magnetic particulate flows. This method can be extended to more general flows without difficulty: three‐dimensional particulate flows, flows with a great number of particles, or flows under an arbitrary external magnetic field. Copyright © 2010 John Wiley & Sons, Ltd.     

Vortex‐in‐cell method combined with a boundary element method for incompressible viscous flow analysis

In this study, an immersed boundary vortex‐in‐cell (VIC) method for simulating the incompressible flow external to two‐dimensional and three‐dimensional bodies is presented. The vorticity transport equation, which is the governing equation of the VIC method, is represented in a Lagrangian form and solved by the vortex blob representation of the flow field. In the present scheme, the treatment of convection and diffusion is based on the classical fractional step algorithm. The rotational component of the velocity is obtained by solving Poisson's equation using an FFT method on a regular Cartesian grid, and the solenoidal component is determined from solving an integral equation using the panel method for the convection term, and the diffusion term is implemented by a particle strength exchange scheme. Both the no‐slip and no‐through flow conditions associated with the surface boundary condition are satisfied by diffusing vortex sheet and distributing singularities on the body, respectively. The present method is distinguished from other methods by the use of the panel method for the enforcement of the no‐through flow condition. The panel method completes making use of the immersed boundary nature inherent in the VIC method and can be also adopted for the calculation of the pressure field. The overall process is parallelized using message passing interface to manage the extensive computational load in the three‐dimensional flow simulations. Copyright © 2011 John Wiley & Sons, Ltd.     

The capturing of free surfaces in incompressible multi‐fluid flows

By treating it as a contact discontinuity in the density field, a free surface between two immiscible fluids can be automatically ‘captured’ by the enforcement of conservation laws. A surface‐capturing method of this kind requires no special tracking or fitting treatment for the free surface, thereby offering the advantage of algorithm simplicity over the surface‐tracking or the surface‐fitting method. A surface‐capturing method based on a new multi‐fluid incompressible Navier–Stokes formulation is developed. It is applied to a variety of free‐surface flows, including the Rayleigh–Taylor instability problem, the ship waves around a Wigley hull and a model bubble‐rising problem to demonstrate the validity and versatility of the present method. Copyright © 2000 John Wiley & Sons, Ltd.     

Application of adaptive mesh refinement method to complex flows in clean rooms

The adaptive mesh refinement (AMR) method is developed for three-dimensional turbulent complex flows in clean rooms using the finite volume method with a collocated grid arrangement. Clean rooms have many interesting and complex flow characteristics especially the secondary flows and the recirculation regions. The accurate numerical solution of the flows is important for the efficient design of clean rooms. The use of the conventional uniform grid requires such a high computational time and data storage capacity that they make computational fluid dynamics (CFD) less attractive for the design optimization. The AMR method is, therefore, applied by using the fine grid only in the required regions and using the coarse grid in the other regions. The velocity is chosen as the main parameter for the grid refinement because it is the most influential parameter in clean rooms. The results show that the present AMR method can reduce the computational time by eight times and the data storage requirement is only 37% of that using the conventional method, while the same order of accuracy can be maintained. The present AMR method is, therefore, proved to be a promising technique for solving three-dimensional turbulent complex flows in clean rooms.     

A 3D second‐order accurate projection‐based Finite Volume code on non‐staggered,non‐uniform structured grids with continuity preserving properties: application to buoyancy‐driven flows

It is well known that exact projection methods (EPM) on non‐staggered grids suffer for the presence of non‐solenoidal spurious modes. Hence, a formulation for simulating time‐dependent incompressible flows while allowing the discrete continuity equation to be satisfied up to machine‐accuracy, by using a Finite Volume‐based second‐order accurate projection method on non‐staggered and non‐uniform 3D grids, is illustrated. The procedure exploits the Helmholtz–Hodge decomposition theorem for deriving an additional velocity field that enforces the discrete continuity without altering the vorticity field. This is accomplished by first solving an elliptic equation on a compact stencil that is by performing a standard approximate projection method (APM). In such a way, three sets of divergence‐free normal‐to‐face velocities can be computed. Then, a second elliptic equation for a scalar field is derived by prescribing that its additional discrete gradient ensures the continuity constraint based on the adopted linear interpolation of the velocity. Characteristics of the double projection method (DPM) are illustrated in details and stability and accuracy of the method are addressed. The resulting numerical scheme is then applied to laminar buoyancy‐driven flows and is proved to be stable and efficient. Copyright © 2006 John Wiley & Sons, Ltd.